Merge tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie: "The usual lots of work all over the place. i915 has gotten some Alderlake work and prelim DG1 code, along with a major locking rework over the GEM code, and brings back the property of timing out long running jobs using a watchdog. amdgpu has some Alderbran support (new GPU), freesync HDMI support along with a lot other fixes. Outside of the drm, there is a new printf specifier added which should have all the correct acks/sobs: - printk fourcc modifier support added %p4cc Summary: core: - drm_crtc_commit_wait - atomic plane state helpers reworked for full state - dma-buf heaps API rework - edid: rework and improvements for displayid dp-mst: - better topology logging bridge: - Chipone ICN6211 - Lontium LT8912B - anx7625 regulator support panel: - fix lt9611 4k panels handling simple-kms: - add plane state helpers ttm: - debugfs support - removal of unused sysfs - ignore signaled moved fences - ioremap buffer according to mem caching i915: - Alderlake S enablement - Conversion to dma_resv_locking - Bring back watchdog timeout support - legacy ioctl cleanups - add GEM TDDO and RFC process - DG1 LMEM preparation work - intel_display.c refactoring - Gen9/TGL PCH combination support - eDP MSO Support - multiple PSR instance support - Link training debug updates - Disable PSR2 support on JSL/EHL - DDR5/LPDDR5 support for bw calcs - LSPCON limited to gen9/10 platforms - HSW/BDW async flip/VTd corruption workaround - SAGV watermark fixes - SNB hard hang on ring resume fix - Limit imported dma-buf size - move to use new tasklet API - refactor KBL/TGL/ADL-S display/gt steppings - refactoring legacy DP/HDMI, FB plane code out amdgpu: - uapi: add ioctl to query video capabilities - Iniital AMD Freesync HDMI support - Initial Adebaran support - 10bpc dithering improvements - DCN secure display support - Drop legacy IO BAR requirements - PCIE/S0ix/RAS/Prime/Reset fixes - Display ASSR support - SMU gfx busy queues for RV/PCO - Initial LTTPR display work amdkfd: - MMU notifier fixes - APU fixes radeon: - debugfs cleanps - fw error handling ifix - Flexible array cleanups msm: - big DSI phy/pll cleanup - sc7280 initial support - commong bandwidth scaling path - shrinker locking contention fixes - unpin/swap support for GEM objcets ast: - cursor plane handling reworked tegra: - don't register DP AUX channels before connectors zynqmp: - fix OOB struct padding memset gma500: - drop ttm and medfield support exynos: - request_irq cleanup function mediatek: - fine tune line time for EOTp - MT8192 dpi support - atomic crtc config updates - don't support HDMI connector creation mxsdb: - imx8mm support panfrost: - MMU IRQ handling rework qxl: - locking fixes - resource deallocation changes sun4i: - add alpha properties to UI/VI layers vc4: - RPi4 CEC support vmwgfx: - doc cleanups arc: - moved to drm/tiny" * tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm: (1390 commits) drm/ttm: Don't count pages in SG BOs against pages_limit drm/ttm: fix return value check drm/bridge: lt8912b: fix incorrect handling of of_* return values drm: bridge: fix LONTIUM use of mipi_dsi_() functions drm: bridge: fix ANX7625 use of mipi_dsi_() functions drm/amdgpu: page retire over debugfs mechanism drm/radeon: Fix a missing check bug in radeon_dp_mst_detect() drm/amd/display: Fix the Wunused-function warning drm/radeon/r600: Fix variables that are not used after assignment drm/amdgpu/smu7: fix CAC setting on TOPAZ drm/amd/display: Update DCN302 SR Exit Latency drm/amdgpu: enable ras eeprom on aldebaran drm/amdgpu: RAS harvest on driver load drm/amdgpu: add ras aldebaran ras eeprom driver drm/amd/pm: increase time out value when sending msg to SMU drm/amdgpu: add DMUB outbox event IRQ source define/complete/debug flag drm/amd/pm: add the callback to get vbios bootup values for vangogh drm/radeon: Fix size overflow drm/amdgpu: Fix size overflow drm/amdgpu: move mmhub ras_func init to ip specific file ...
chewitt · Apr 28, 2021 · 68a32ba · 68a32ba
2 parents 3aa139a + a1a1ca7
commit 68a32ba
Show file tree

Hide file tree

Showing 1,145 changed files with 182,622 additions and 31,929 deletions.
diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst
@@ -591,6 +591,24 @@ For printing netdev_features_t.
 
 Passed by reference.
 
+V4L2 and DRM FourCC code (pixel format)
+---------------------------------------
+
+::
+
+	%p4cc
+
+Print a FourCC code used by V4L2 or DRM, including format endianness and
+its numerical value as hexadecimal.
+
+Passed by reference.
+
+Examples::
+
+	%p4cc	BG12 little-endian (0x32314742)
+	%p4cc	Y10  little-endian (0x20303159)
+	%p4cc	NV12 big-endian (0xb231564e)
+
 Thanks
 ======
 

diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -12,8 +12,8 @@ description: |
   and CEC.
 
   These DT bindings follow the Synopsys DWC HDMI TX bindings defined
-  in Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with
-  the following device-specific properties.
+  in bridge/synopsys,dw-hdmi.yaml with the following device-specific
+  properties.
 
 maintainers:
   - Chen-Yu Tsai <[email protected]>

diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@@ -109,7 +109,7 @@ required:
   - resets
   - ddc
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
@@ -34,6 +34,15 @@ properties:
     description: used for reset chip control, RESET_N pin B7.
     maxItems: 1
 
+  vdd10-supply:
+    description: Regulator that provides the supply 1.0V power.
+
+  vdd18-supply:
+    description: Regulator that provides the supply 1.8V power.
+
+  vdd33-supply:
+    description: Regulator that provides the supply 3.3V power.
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -55,6 +64,9 @@ properties:
 required:
   - compatible
   - reg
+  - vdd10-supply
+  - vdd18-supply
+  - vdd33-supply
   - ports
 
 additionalProperties: false
@@ -72,6 +84,9 @@ examples:
             reg = <0x58>;
             enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
             reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
+            vdd10-supply = <&pp1000_mipibrdg>;
+            vdd18-supply = <&pp1800_mipibrdg>;
+            vdd33-supply = <&pp3300_mipibrdg>;
 
             ports {
                 #address-cells = <1>;

diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
+
+maintainers:
+  - Jagan Teki <[email protected]>
+
+description: |
+  ICN6211 is MIPI-DSI to RGB Converter bridge from chipone.
+
+  It has a flexible configuration of MIPI DSI signal input and
+  produce RGB565, RGB666, RGB888 output format.
+
+properties:
+  compatible:
+    enum:
+      - chipone,icn6211
+
+  reg:
+    maxItems: 1
+    description: virtual channel number of a DSI peripheral
+
+  enable-gpios:
+    description: Bridge EN pin, chip is reset when EN is low.
+
+  vdd1-supply:
+    description: A 1.8V/2.5V/3.3V supply that power the MIPI RX.
+
+  vdd2-supply:
+    description: A 1.8V/2.5V/3.3V supply that power the PLL.
+
+  vdd3-supply:
+    description: A 1.8V/2.5V/3.3V supply that power the RGB output.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DSI input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DPI output (panel or connector).
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@0 {
+        compatible = "chipone,icn6211";
+        reg = <0>;
+        enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            bridge_in_dsi: endpoint {
+              remote-endpoint = <&dsi_out_bridge>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+
+            bridge_out_panel: endpoint {
+              remote-endpoint = <&panel_out_bridge>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt b/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt8912b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT8912B MIPI to HDMI Bridge
+
+maintainers:
+  - Adrien Grassein <[email protected]>
+
+description: |
+  The LT8912B is a bridge device which convert DSI to HDMI
+
+properties:
+  compatible:
+    enum:
+      - lontium,lt8912b
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active high RESET pin.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Primary MIPI port for MIPI input
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes: true
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          HDMI port, should be connected to a node compatible with the
+          hdmi-connector binding.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c4 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hdmi-bridge@48 {
+        compatible = "lontium,lt8912b";
+        reg = <0x48>;
+        reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            hdmi_out_in: endpoint {
+              data-lanes = <0 1 2 3>;
+              remote-endpoint = <&mipi_dsi_out>;
+            };
+          };
+
+          port@1 {
+              reg = <1>;
+
+              endpoint {
+                  remote-endpoint = <&hdmi_in>;
+              };
+          };
+        };
+      };
+    };
+
+...