Merge tag 'iio-for-4.6a' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/jic23/iio into staging-next

Jonathan writes:

First round of new IIO device support, features and cleanups for the 4.6 cycle.

Device Support
* ad5761
  - new driver
* at91_sama5d2 ADC.
  - new driver and MAINTAINERS entry.
  - minor cleanups followed.
* atlas pH-SM
  - new driver (this has possibly the prettiest data sheet I've ever seen)
* mcp3422
  - mcp3425 ADC added.
* mcp4725
  - mcp4726 DAC added.
* mma8452
  - mma8451q accelerometer added.
* mpl115
  - mpl115a1 added (a lot bigger than it seems as this is an SPI part whereas
    previous parts were i2c).
* si7005
  - Hoperf th02 (seems to be a repackaged part)
* si7020
  - Hoperf th06 (seems to be a repackaged part)

New features
* Core
  - IIO_PH type. Does what it says on the tin.
* max30100
  - LED current configuration support.
* mcp320x
  - more differential measurement combinations.
* mma8452
  - free fall deteciton
- opt3001
  - enable operation without a IRQ line.
  - device tree docs.  Somehow the original docs have disappeared down
    a rabbit hole, so here is a new set.
* st-sensors
  - Support active-low interrupts.

Cleanups and minor / not so minor reworks
* Documentation
  - drop some defunct ABI from the docs in staging.
* presure / Kconfig
  - white space cleanup.
* ad7150
  - BIT macro usage
  - Alignment fixes
* ad7192
  - false indent fixed.
* ak8975
  - constify the ak_def structures
* axp288
  - drop a redundant double const.
* dht11
  - substantial reliability improvements by being more tolerant
    of missing start bits.
  - simplify the decoding algorithm
* mma8452
  - whitespace cleanup
* mpl115
  - don't bother setting i2c_client_data as nothing uses it.
* mpu6050
  - drop unused function parameter.
* opt3001
  - extract integration time as constants.
  - trivial refactoring.

CREDITS

@@ -3054,6 +3054,7 @@ D: PLX USB338x driver
 D: PCA9634 driver
 D: Option GTM671WFS
 D: Fintek F81216A
+D: AD5761 iio driver
 D: Various kernel hacks
 S: Qtechnology A/S
 S: Valby Langgade 142

Documentation/ABI/testing/sysfs-bus-iio

@@ -497,7 +497,9 @@ Description:
 		6kohm_to_gnd: connected to ground via a 6kOhm resistor,
 		20kohm_to_gnd: connected to ground via a 20kOhm resistor,
 		100kohm_to_gnd: connected to ground via an 100kOhm resistor,
+		125kohm_to_gnd: connected to ground via an 125kOhm resistor,
 		500kohm_to_gnd: connected to ground via a 500kOhm resistor,
+		640kohm_to_gnd: connected to ground via a 640kOhm resistor,
 		three_state: left floating.
 		For a list of available output power down options read
 		outX_powerdown_mode_available. If Y is not present the
@@ -1491,3 +1493,10 @@ Description:
 		This ABI is especially applicable for humidity sensors
 		to heatup the device and get rid of any condensation
 		in some humidity environment
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_ph_raw
+KernelVersion:	4.5
+Contact:	[email protected]
+Description:
+		Raw (unscaled no offset etc.) pH reading of a substance as a negative
+		base-10 logarithm of hydrodium ions in a litre of water.

Documentation/devicetree/bindings/iio/accel/mma8452.txt

@@ -1,8 +1,10 @@
-Freescale MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC triaxial accelerometer
+Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC
+triaxial accelerometer
 
 Required properties:
 
   - compatible: should contain one of
+    * "fsl,mma8451"
     * "fsl,mma8452"
     * "fsl,mma8453"
     * "fsl,mma8652"

Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt

@@ -0,0 +1,28 @@
+* AT91 SAMA5D2 Analog to Digital Converter (ADC)
+
+Required properties:
+  - compatible: Should be "atmel,sama5d2-adc".
+  - reg: Should contain ADC registers location and length.
+  - interrupts: Should contain the IRQ line for the ADC.
+  - clocks: phandle to device clock.
+  - clock-names: Must be "adc_clk".
+  - vref-supply: Supply used as reference for conversions.
+  - vddana-supply: Supply for the adc device.
+  - atmel,min-sample-rate-hz: Minimum sampling rate, it depends on SoC.
+  - atmel,max-sample-rate-hz: Maximum sampling rate, it depends on SoC.
+  - atmel,startup-time-ms: Startup time expressed in ms, it depends on SoC.
+
+Example:
+
+adc: adc@fc030000 {
+	compatible = "atmel,sama5d2-adc";
+	reg = <0xfc030000 0x100>;
+	interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
+	clocks = <&adc_clk>;
+	clock-names = "adc_clk";
+	atmel,min-sample-rate-hz = <200000>;
+	atmel,max-sample-rate-hz = <20000000>;
+	atmel,startup-time-ms = <4>;
+	vddana-supply = <&vdd_3v3_lp_reg>;
+	vref-supply = <&vdd_3v3_lp_reg>;
+}

Documentation/devicetree/bindings/iio/adc/mcp3422.txt

@@ -6,6 +6,7 @@ Required properties:
 	"microchip,mcp3422" or
 	"microchip,mcp3423" or
 	"microchip,mcp3424" or
+	"microchip,mcp3425" or
 	"microchip,mcp3426" or
 	"microchip,mcp3427" or
 	"microchip,mcp3428"

Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt

@@ -0,0 +1,22 @@
+* Atlas Scientific pH-SM OEM sensor
+
+http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf
+
+Required properties:
+
+  - compatible: must be "atlas,ph-sm"
+  - reg: the I2C address of the sensor
+  - interrupt-parent: should be the phandle for the interrupt controller
+  - interrupts: the sole interrupt generated by the device
+
+  Refer to interrupt-controller/interrupts.txt for generic interrupt client
+  node bindings.
+
+Example:
+
+atlas@65 {
+	compatible = "atlas,ph-sm";
+	reg = <0x65>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <16 2>;
+};

Documentation/devicetree/bindings/iio/health/max30100.txt

@@ -11,11 +11,19 @@ Required properties:
   Refer to interrupt-controller/interrupts.txt for generic
   interrupt client node bindings.
 
+Optional properties:
+  - maxim,led-current-microamp: configuration for LED current in microamperes
+    while the engine is running. First indexed value is the configuration for
+    the RED LED, and second value is for the IR LED.
+
+    Refer to the datasheet for the allowed current values.
+
 Example:
 
 max30100@057 {
 	compatible = "maxim,max30100";
 	reg = <57>;
+	maxim,led-current-microamp = <24000 50000>;
 	interrupt-parent = <&gpio1>;
 	interrupts = <16 2>;
 };

Documentation/devicetree/bindings/iio/light/opt3001.txt

@@ -0,0 +1,26 @@
+* Texas Instruments OPT3001 Ambient Light Sensor
+
+The driver supports interrupt-driven and interrupt-less operation, depending
+on whether an interrupt property has been populated into the DT. Note that
+the optional generation of IIO events on rising/falling light threshold changes
+requires the use of interrupts. Without interrupts, only the simple reading
+of the current light value is supported through the IIO API.
+
+http://www.ti.com/product/opt3001
+
+Required properties:
+  - compatible: should be "ti,opt3001"
+  - reg: the I2C address of the sensor
+
+Optional properties:
+  - interrupt-parent: should be the phandle for the interrupt controller
+  - interrupts: interrupt mapping for GPIO IRQ (configure for falling edge)
+
+Example:
+
+opt3001@44 {
+	compatible = "ti,opt3001";
+	reg = <0x44>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -28,6 +28,7 @@ arm	ARM Ltd.
 armadeus	ARMadeus Systems SARL
 artesyn	Artesyn Embedded Technologies Inc.
 asahi-kasei	Asahi Kasei Corp.
+atlas	Atlas Scientific LLC
 atmel	Atmel Corporation
 auo	AU Optronics Corporation
 avago	Avago Technologies

MAINTAINERS

@@ -1945,6 +1945,12 @@ M:	Nicolas Ferre <[email protected]>
 S:	Supported
 F:	drivers/tty/serial/atmel_serial.c
 
+ATMEL SAMA5D2 ADC DRIVER
+M:	Ludovic Desroches <[email protected]>
+L:	[email protected]
+S:	Supported
+F:	drivers/iio/adc/at91-sama5d2_adc.c
+
 ATMEL Audio ALSA driver
 M:	Nicolas Ferre <[email protected]>
 L:	[email protected] (moderated for non-subscribers)

drivers/iio/accel/Kconfig

@@ -143,7 +143,7 @@ config MMA8452
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for the following Freescale 3-axis
-	  accelerometers: MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC.
+	  accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called mma8452.