Update MS redis (local dev server) to 2.8.4

.gitignore

@@ -11,4 +11,5 @@ Mono/
 *.sln.ide
 *.rdb
 *.orig
-redis-cli.exe
+redis-cli.exe
+Redis Configs/*.dat

.hgignore

@@ -16,4 +16,5 @@ Mono/
 *.sln.ide
 *.rdb
 *.orig
-redis-cli.exe
+redis-cli.exe
+Redis Configs/*.dat

.nuget/packages.config

@@ -1,5 +1,5 @@
 <?xml version="1.0" encoding="utf-8"?>
 <packages>
   <package id="NuGet.CommandLine" version="2.8.0" />
-  <package id="Redis-64" version="2.6.12.1" />
+  <package id="Redis-64" version="2.8.4" />
 </packages>

Redis Configs/redis-cli 7000.cmd

@@ -1 +1 @@
-@..\packages\Redis-64.2.6.12.1\tools\redis-cli.exe -h cluster -p 7000
+@..\packages\Redis-64.2.8.4\redis-cli.exe -h cluster -p 7000

Redis Configs/redis-cli 7001.cmd

@@ -1 +1 @@
-@..\packages\Redis-64.2.6.12.1\tools\redis-cli.exe -h cluster -p 7001
+@..\packages\Redis-64.2.8.4\redis-cli.exe -h cluster -p 7001

Redis Configs/redis-cli 7002.cmd

@@ -1 +1 @@
-@..\packages\Redis-64.2.6.12.1\tools\redis-cli.exe -h cluster -p 7002
+@..\packages\Redis-64.2.8.4\redis-cli.exe -h cluster -p 7002

Redis Configs/redis-cli 7003.cmd

@@ -1 +1 @@
-@..\packages\Redis-64.2.6.12.1\tools\redis-cli.exe -h cluster -p 7003
+@..\packages\Redis-64.2.8.4\redis-cli.exe -h cluster -p 7003

Redis Configs/redis-cli 7004.cmd

@@ -1 +1 @@
-@..\packages\Redis-64.2.6.12.1\tools\redis-cli.exe -h cluster -p 7004
+@..\packages\Redis-64.2.8.4\redis-cli.exe -h cluster -p 7004

Redis Configs/redis-cli 7005.cmd

@@ -1 +1 @@
-@..\packages\Redis-64.2.6.12.1\tools\redis-cli.exe -h cluster -p 7005
+@..\packages\Redis-64.2.8.4\redis-cli.exe -h cluster -p 7005

Redis Configs/redis-cli master.cmd

@@ -1 +1 @@
-@..\packages\Redis-64.2.6.12.1\tools\redis-cli.exe -p 6379
+@..\packages\Redis-64.2.8.4\redis-cli.exe -p 6379

Redis Configs/redis-cli secure.cmd

@@ -1 +1 @@
-@..\packages\Redis-64.2.6.12.1\tools\redis-cli.exe -p 6381
+@..\packages\Redis-64.2.8.4\redis-cli.exe -p 6381

Redis Configs/redis-cli slave.cmd

@@ -1 +1 @@
-@..\packages\Redis-64.2.6.12.1\tools\redis-cli.exe -p 6380
+@..\packages\Redis-64.2.8.4\redis-cli.exe -p 6380

Redis Configs/redis-server alll local.cmd

@@ -1,3 +1,3 @@
-@start ..\packages\Redis-64.2.6.12.1\tools\redis-server.exe master.conf
-@start ..\packages\Redis-64.2.6.12.1\tools\redis-server.exe slave.conf
-@start ..\packages\Redis-64.2.6.12.1\tools\redis-server.exe secure.conf
+@start ..\packages\Redis-64.2.8.4\redis-server.exe master.conf
+@start ..\packages\Redis-64.2.8.4\redis-server.exe slave.conf
+@start ..\packages\Redis-64.2.8.4\redis-server.exe secure.conf

Redis Configs/redis-server master.cmd

@@ -1 +1 @@
-@..\packages\Redis-64.2.6.12.1\tools\redis-server.exe master.conf
+@..\packages\Redis-64.2.8.4\redis-server.exe master.conf

Redis Configs/redis-server secure.cmd

@@ -1 +1 @@
-@..\packages\Redis-64.2.6.12.1\tools\redis-server.exe secure.conf
+@..\packages\Redis-64.2.8.4\redis-server.exe secure.conf

Redis Configs/redis-server slave.cmd

@@ -1 +1 @@
-@..\packages\Redis-64.2.6.12.1\tools\redis-server.exe slave.conf
+@..\packages\Redis-64.2.8.4\redis-server.exe slave.conf

packages/Redis-64.2.6.12.1/tools/redis.conf → packages/Redis-64.2.8.4/redis.windows.conf

@@ -39,8 +39,24 @@ port 6379
 # Close the connection after a client is idle for N seconds (0 to disable)
 timeout 0
 
-# Set server verbosity to 'debug'
-# it can be one of:
+# TCP keepalive.
+#
+# If non-zero, use SO_KEEPALIVE to send TCP ACKs to clients in absence
+# of communication. This is useful for two reasons:
+#
+# 1) Detect dead peers.
+# 2) Take the connection alive from the point of view of network
+#    equipment in the middle.
+#
+# On Linux, the specified value (in seconds) is the period used to send ACKs.
+# Note that to close the connection the double of the time is needed.
+# On other kernels the period depends on the kernel configuration.
+#
+# A reasonable value for this option is 60 seconds.
+tcp-keepalive 0
+
+# Specify the server verbosity level.
+# This can be one of:
 # debug (a lot of information, useful for development/testing)
 # verbose (many rarely useful info, but not a mess like the debug level)
 # notice (moderately verbose, what you want in production probably)
@@ -59,7 +75,7 @@ logfile stdout
 # Specify the syslog identity.
 # syslog-ident redis
 
-# Specify the syslog facility.  Must be USER or between LOCAL0-LOCAL7.
+# Specify the syslog facility. Must be USER or between LOCAL0-LOCAL7.
 # syslog-facility local0
 
 # Set the number of databases. The default database is DB 0, you can select
@@ -114,7 +130,7 @@ stop-writes-on-bgsave-error yes
 # the dataset will likely be bigger if you have compressible values or keys.
 rdbcompression yes
 
-# Since verison 5 of RDB a CRC64 checksum is placed at the end of the file.
+# Since version 5 of RDB a CRC64 checksum is placed at the end of the file.
 # This makes the format more resistant to corruption but there is a performance
 # hit to pay (around 10%) when saving and loading RDB files, so you can disable it
 # for maximum performances.
@@ -131,7 +147,7 @@ dbfilename dump.rdb
 # The DB will be written inside this directory, with the filename specified
 # above using the 'dbfilename' configuration directive.
 # 
-# Also the Append Only File will be created inside this directory.
+# The Append Only File will also be created inside this directory.
 # 
 # Note that you must specify a directory here, not a file name.
 dir ./
@@ -152,14 +168,14 @@ dir ./
 #
 # masterauth <master-password>
 
-# When a slave lost the connection with the master, or when the replication
+# When a slave loses its connection with the master, or when the replication
 # is still in progress, the slave can act in two different ways:
 #
 # 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will
 #    still reply to client requests, possibly with out of date data, or the
 #    data set may just be empty if this is the first synchronization.
 #
-# 2) if slave-serve-stale data is set to 'no' the slave will reply with
+# 2) if slave-serve-stale-data is set to 'no' the slave will reply with
 #    an error "SYNC with master in progress" to all the kind of commands
 #    but to INFO and SLAVEOF.
 #
@@ -196,6 +212,21 @@ slave-read-only yes
 #
 # repl-timeout 60
 
+# Disable TCP_NODELAY on the slave socket after SYNC?
+#
+# If you select "yes" Redis will use a smaller number of TCP packets and
+# less bandwidth to send data to slaves. But this can add a delay for
+# the data to appear on the slave side, up to 40 milliseconds with
+# Linux kernels using a default configuration.
+#
+# If you select "no" the delay for data to appear on the slave side will
+# be reduced but more bandwidth will be used for replication.
+#
+# By default we optimize for low latency, but in very high traffic conditions
+# or when the master and slaves are many hops away, turning this to "yes" may
+# be a good idea.
+repl-disable-tcp-nodelay no
+
 # The slave priority is an integer number published by Redis in the INFO output.
 # It is used by Redis Sentinel in order to select a slave to promote into a
 # master if the master is no longer working correctly.
@@ -230,23 +261,26 @@ slave-priority 100
 #
 # It is possible to change the name of dangerous commands in a shared
 # environment. For instance the CONFIG command may be renamed into something
-# of hard to guess so that it will be still available for internal-use
-# tools but not available for general clients.
+# hard to guess so that it will still be available for internal-use tools
+# but not available for general clients.
 #
 # Example:
 #
 # rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52
 #
-# It is also possible to completely kill a command renaming it into
+# It is also possible to completely kill a command by renaming it into
 # an empty string:
 #
 # rename-command CONFIG ""
+#
+# Please note that changing the name of commands that are logged into the
+# AOF file or transmitted to slaves may cause problems.
 
 ################################### LIMITS ####################################
 
 # Set the max number of connected clients at the same time. By default
 # this limit is set to 10000 clients, however if the Redis server is not
-# able ot configure the process file limit to allow for the specified limit
+# able to configure the process file limit to allow for the specified limit
 # the max number of allowed clients is set to the current file limit
 # minus 32 (as Redis reserves a few file descriptors for internal uses).
 #
@@ -255,6 +289,40 @@ slave-priority 100
 #
 # maxclients 10000
 
+# The Linux version of Redis relies on the system call fork() to perform
+# point-in-time snapshots of the heap. In addition to the AOF and RDB backup
+# mechanism, the master-slave synchronization and clustering features are 
+# dependent on this behavior of fork(). In order for the Windows version to 
+# perform like the Linux version we had to simulate this aspect of fork().
+# Doing so meant moving the Redis heap into a memory mapped file that can
+# be shared with a child process. 
+#
+# *** There must be disk space available for this file in order for Redis 
+# to launch. ***
+#
+# The maxheap flag controls the maximum size of this memory mapped file,
+# as well as the total usable space for the Redis heap. Running Redis
+# without either maxheap or maxmemory will result in a memory mapped file 
+# being created that is equal to the size of physical memory. During 
+# fork() operations the total page file commit will max out at around:
+#
+#    (size of physical memory) + (2 * size of maxheap)
+#
+# For instance, on a machine with 8GB of physical RAM, the max page file 
+# commit with the default maxheap size will be (8)+(2*8) GB , or 24GB. The
+# default page file sizing of Windows will allow for this without having 
+# to reconfigure the system. Larger heap sizes are possible, but the maximum
+# page file size will have to be increased accordingly.
+# 
+# The Redis heap must be larger than the value specified by the maxmemory 
+# flag, as the heap allocator has its own memory requirements and 
+# fragmentation of the heap is inevitable. If only the maxmemory flag is 
+# specified, maxheap will be set at 1.5*maxmemory. If the maxheap flag is 
+# specified along with maxmemory, the maxheap flag will be automatically 
+# increased if it is smaller than 1.5*maxmemory. 
+#  
+# maxheap <bytes>
+
 # Don't use more memory than the specified amount of bytes.
 # When the memory limit is reached Redis will try to remove keys
 # accordingly to the eviction policy selected (see maxmemmory-policy).
@@ -281,7 +349,7 @@ slave-priority 100
 # maxmemory <bytes>
 
 # MAXMEMORY POLICY: how Redis will select what to remove when maxmemory
-# is reached? You can select among five behavior:
+# is reached. You can select among five behaviors:
 # 
 # volatile-lru -> remove the key with an expire set using an LRU algorithm
 # allkeys-lru -> remove any key accordingly to the LRU algorithm
@@ -290,7 +358,7 @@ slave-priority 100
 # volatile-ttl -> remove the key with the nearest expire time (minor TTL)
 # noeviction -> don't expire at all, just return an error on write operations
 # 
-# Note: with all the kind of policies, Redis will return an error on write
+# Note: with any of the above policies, Redis will return an error on write
 #       operations, when there are not suitable keys for eviction.
 #
 #       At the date of writing this commands are: set setnx setex append
@@ -346,7 +414,7 @@ appendonly no
 # always: fsync after every write to the append only log . Slow, Safest.
 # everysec: fsync only one time every second. Compromise.
 #
-# The default is "everysec" that's usually the right compromise between
+# The default is "everysec", as that's usually the right compromise between
 # speed and data safety. It's up to you to understand if you can relax this to
 # "no" that will let the operating system flush the output buffer when
 # it wants, for better performances (but if you can live with the idea of
@@ -374,9 +442,9 @@ appendfsync everysec
 # that will prevent fsync() from being called in the main process while a
 # BGSAVE or BGREWRITEAOF is in progress.
 #
-# This means that while another child is saving the durability of Redis is
-# the same as "appendfsync none", that in practical terms means that it is
-# possible to lost up to 30 seconds of log in the worst scenario (with the
+# This means that while another child is saving, the durability of Redis is
+# the same as "appendfsync none". In practical terms, this means that it is
+# possible to lose up to 30 seconds of log in the worst scenario (with the
 # default Linux settings).
 # 
 # If you have latency problems turn this to "yes". Otherwise leave it as
@@ -385,10 +453,10 @@ no-appendfsync-on-rewrite no
 
 # Automatic rewrite of the append only file.
 # Redis is able to automatically rewrite the log file implicitly calling
-# BGREWRITEAOF when the AOF log size will growth by the specified percentage.
+# BGREWRITEAOF when the AOF log size grows by the specified percentage.
 # 
 # This is how it works: Redis remembers the size of the AOF file after the
-# latest rewrite (or if no rewrite happened since the restart, the size of
+# latest rewrite (if no rewrite has happened since the restart, the size of
 # the AOF at startup is used).
 #
 # This base size is compared to the current size. If the current size is
@@ -524,11 +592,34 @@ activerehashing yes
 # Instead there is a default limit for pubsub and slave clients, since
 # subscribers and slaves receive data in a push fashion.
 #
-# Both the hard or the soft limit can be disabled just setting it to zero.
+# Both the hard or the soft limit can be disabled by setting them to zero.
 client-output-buffer-limit normal 0 0 0
 client-output-buffer-limit slave 256mb 64mb 60
 client-output-buffer-limit pubsub 32mb 8mb 60
 
+# Redis calls an internal function to perform many background tasks, like
+# closing connections of clients in timeot, purging expired keys that are
+# never requested, and so forth.
+#
+# Not all tasks are perforemd with the same frequency, but Redis checks for
+# tasks to perform accordingly to the specified "hz" value.
+#
+# By default "hz" is set to 10. Raising the value will use more CPU when
+# Redis is idle, but at the same time will make Redis more responsive when
+# there are many keys expiring at the same time, and timeouts may be
+# handled with more precision.
+#
+# The range is between 1 and 500, however a value over 100 is usually not
+# a good idea. Most users should use the default of 10 and raise this up to
+# 100 only in environments where very low latency is required.
+hz 10
+
+# When a child rewrites the AOF file, if the following option is enabled
+# the file will be fsync-ed every 32 MB of data generated. This is useful
+# in order to commit the file to the disk more incrementally and avoid
+# big latency spikes.
+aof-rewrite-incremental-fsync yes
+
 ################################## INCLUDES ###################################
 
 # Include one or more other config files here.  This is useful if you