Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/jikos/trivial

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits)
  vlynq: make whole Kconfig-menu dependant on architecture
  add descriptive comment for TIF_MEMDIE task flag declaration.
  EEPROM: max6875: Header file cleanup
  EEPROM: 93cx6: Header file cleanup
  EEPROM: Header file cleanup
  agp: use NULL instead of 0 when pointer is needed
  rtc-v3020: make bitfield unsigned
  PCI: make bitfield unsigned
  jbd2: use NULL instead of 0 when pointer is needed
  cciss: fix shadows sparse warning
  doc: inode uses a mutex instead of a semaphore.
  uml: i386: Avoid redefinition of NR_syscalls
  fix "seperate" typos in comments
  cocbalt_lcdfb: correct sections
  doc: Change urls for sparse
  Powerpc: wii: Fix typo in comment
  i2o: cleanup some exit paths
  Documentation/: it's -> its where appropriate
  UML: Fix compiler warning due to missing task_struct declaration
  UML: add kernel.h include to signal.c
  ...

Documentation/ABI/testing/sysfs-devices-memory

@@ -43,7 +43,7 @@ Date:		September 2008
 Contact:	Badari Pulavarty <[email protected]>
 Description:
 		The file /sys/devices/system/memory/memoryX/state
-		is read-write.  When read, it's contents show the
+		is read-write.  When read, its contents show the
 		online/offline state of the memory section.  When written,
 		root can toggle the the online/offline state of a removable
 		memory section (see removable file description above)

Documentation/DMA-API-HOWTO.txt

@@ -742,7 +742,7 @@ failure can be determined by:
 
 			   Closing
 
-This document, and the API itself, would not be in it's current
+This document, and the API itself, would not be in its current
 form without the feedback and suggestions from numerous individuals.
 We would like to specifically mention, in no particular order, the
 following people:

Documentation/DocBook/libata.tmpl

@@ -477,7 +477,7 @@ void (*host_stop) (struct ata_host_set *host_set);
 	allocates space for a legacy IDE PRD table and returns.
 	</para>
 	<para>
-	->port_stop() is called after ->host_stop().  It's sole function
+	->port_stop() is called after ->host_stop().  Its sole function
 	is to release DMA/memory resources, now that they are no longer
 	actively being used.  Many drivers also free driver-private
 	data from port at this time.

Documentation/PCI/pci-error-recovery.txt

@@ -216,7 +216,7 @@ The driver should return one of the following result codes:
 
 		- PCI_ERS_RESULT_NEED_RESET
 		  Driver returns this if it thinks the device is not
-		  recoverable in it's current state and it needs a slot
+		  recoverable in its current state and it needs a slot
 		  reset to proceed.
 
 		- PCI_ERS_RESULT_DISCONNECT
@@ -241,7 +241,7 @@ in working condition.
 
 The driver is not supposed to restart normal driver I/O operations
 at this point.  It should limit itself to "probing" the device to
-check it's recoverability status. If all is right, then the platform
+check its recoverability status. If all is right, then the platform
 will call resume() once all drivers have ack'd link_reset().
 
 	Result codes:

Documentation/Smack.txt

@@ -73,7 +73,7 @@ NOTE: Smack labels are limited to 23 characters. The attr command
 If you don't do anything special all users will get the floor ("_")
 label when they log in. If you do want to log in via the hacked ssh
 at other labels use the attr command to set the smack value on the
-home directory and it's contents.
+home directory and its contents.
 
 You can add access rules in /etc/smack/accesses. They take the form:
 

Documentation/arm/SA1100/ADSBitsy

@@ -32,7 +32,7 @@ Notes:
 
 - The flash on board is divided into 3 partitions.
   You should be careful to use flash on board.
-  It's partition is different from GraphicsClient Plus and GraphicsMaster
+  Its partition is different from GraphicsClient Plus and GraphicsMaster
 
 - 16bpp mode requires a different cable than what ships with the board.
   Contact ADS or look through the manual to wire your own. Currently,

Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen

@@ -7,7 +7,7 @@ The driver only implements a four-wire touch panel protocol.
 
 The touchscreen driver is maintenance free except for the pen-down or
 touch threshold.  Some resistive displays and board combinations may
-require tuning of this threshold.  The driver exposes some of it's
+require tuning of this threshold.  The driver exposes some of its
 internal state in the sys filesystem.  If the kernel is configured
 with it, CONFIG_SYSFS, and sysfs is mounted at /sys, there will be a
 directory

Documentation/atomic_ops.txt

@@ -320,7 +320,7 @@ counter decrement would not become globally visible until the
 obj->active update does.
 
 As a historical note, 32-bit Sparc used to only allow usage of
-24-bits of it's atomic_t type.  This was because it used 8 bits
+24-bits of its atomic_t type.  This was because it used 8 bits
 as a spinlock for SMP safety.  Sparc32 lacked a "compare and swap"
 type instruction.  However, 32-bit Sparc has since been moved over
 to a "hash table of spinlocks" scheme, that allows the full 32-bit

Documentation/blackfin/bfin-gpio-notes.txt

@@ -43,7 +43,7 @@
 	void bfin_gpio_irq_free(unsigned gpio);
 
     The request functions will record the function state for a certain pin,
-    the free functions will clear it's function state.
+    the free functions will clear its function state.
     Once a pin is requested, it can't be requested again before it is freed by
     previous caller, otherwise kernel will dump stacks, and the request
     function fail.

Documentation/cachetlb.txt

@@ -5,7 +5,7 @@
 
 This document describes the cache/tlb flushing interfaces called
 by the Linux VM subsystem.  It enumerates over each interface,
-describes it's intended purpose, and what side effect is expected
+describes its intended purpose, and what side effect is expected
 after the interface is invoked.
 
 The side effects described below are stated for a uniprocessor
@@ -231,7 +231,7 @@ require a whole different set of interfaces to handle properly.
 The biggest problem is that of virtual aliasing in the data cache
 of a processor.
 
-Is your port susceptible to virtual aliasing in it's D-cache?
+Is your port susceptible to virtual aliasing in its D-cache?
 Well, if your D-cache is virtually indexed, is larger in size than
 PAGE_SIZE, and does not prevent multiple cache lines for the same
 physical address from existing at once, you have this problem.
@@ -249,7 +249,7 @@ one way to solve this (in particular SPARC_FLAG_MMAPSHARED).
 Next, you have to solve the D-cache aliasing issue for all
 other cases.  Please keep in mind that fact that, for a given page
 mapped into some user address space, there is always at least one more
-mapping, that of the kernel in it's linear mapping starting at
+mapping, that of the kernel in its linear mapping starting at
 PAGE_OFFSET.  So immediately, once the first user maps a given
 physical page into its address space, by implication the D-cache
 aliasing problem has the potential to exist since the kernel already

Documentation/cgroups/cgroups.txt

@@ -572,7 +572,7 @@ void cancel_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
 
 Called when a task attach operation has failed after can_attach() has succeeded.
 A subsystem whose can_attach() has some side-effects should provide this
-function, so that the subsytem can implement a rollback. If not, not necessary.
+function, so that the subsystem can implement a rollback. If not, not necessary.
 This will be called only about subsystems whose can_attach() operation have
 succeeded.
 

Documentation/cgroups/cpusets.txt

@@ -42,7 +42,7 @@ Nodes to a set of tasks.   In this document "Memory Node" refers to
 an on-line node that contains memory.
 
 Cpusets constrain the CPU and Memory placement of tasks to only
-the resources within a tasks current cpuset.  They form a nested
+the resources within a task's current cpuset.  They form a nested
 hierarchy visible in a virtual file system.  These are the essential
 hooks, beyond what is already present, required to manage dynamic
 job placement on large systems.
@@ -53,11 +53,11 @@ Documentation/cgroups/cgroups.txt.
 Requests by a task, using the sched_setaffinity(2) system call to
 include CPUs in its CPU affinity mask, and using the mbind(2) and
 set_mempolicy(2) system calls to include Memory Nodes in its memory
-policy, are both filtered through that tasks cpuset, filtering out any
+policy, are both filtered through that task's cpuset, filtering out any
 CPUs or Memory Nodes not in that cpuset.  The scheduler will not
 schedule a task on a CPU that is not allowed in its cpus_allowed
 vector, and the kernel page allocator will not allocate a page on a
-node that is not allowed in the requesting tasks mems_allowed vector.
+node that is not allowed in the requesting task's mems_allowed vector.
 
 User level code may create and destroy cpusets by name in the cgroup
 virtual file system, manage the attributes and permissions of these
@@ -121,9 +121,9 @@ Cpusets extends these two mechanisms as follows:
  - Each task in the system is attached to a cpuset, via a pointer
    in the task structure to a reference counted cgroup structure.
  - Calls to sched_setaffinity are filtered to just those CPUs
-   allowed in that tasks cpuset.
+   allowed in that task's cpuset.
  - Calls to mbind and set_mempolicy are filtered to just
-   those Memory Nodes allowed in that tasks cpuset.
+   those Memory Nodes allowed in that task's cpuset.
  - The root cpuset contains all the systems CPUs and Memory
    Nodes.
  - For any cpuset, one can define child cpusets containing a subset
@@ -141,11 +141,11 @@ into the rest of the kernel, none in performance critical paths:
  - in init/main.c, to initialize the root cpuset at system boot.
  - in fork and exit, to attach and detach a task from its cpuset.
  - in sched_setaffinity, to mask the requested CPUs by what's
-   allowed in that tasks cpuset.
+   allowed in that task's cpuset.
  - in sched.c migrate_live_tasks(), to keep migrating tasks within
    the CPUs allowed by their cpuset, if possible.
  - in the mbind and set_mempolicy system calls, to mask the requested
-   Memory Nodes by what's allowed in that tasks cpuset.
+   Memory Nodes by what's allowed in that task's cpuset.
  - in page_alloc.c, to restrict memory to allowed nodes.
  - in vmscan.c, to restrict page recovery to the current cpuset.
 
@@ -155,7 +155,7 @@ new system calls are added for cpusets - all support for querying and
 modifying cpusets is via this cpuset file system.
 
 The /proc/<pid>/status file for each task has four added lines,
-displaying the tasks cpus_allowed (on which CPUs it may be scheduled)
+displaying the task's cpus_allowed (on which CPUs it may be scheduled)
 and mems_allowed (on which Memory Nodes it may obtain memory),
 in the two formats seen in the following example:
 
@@ -323,17 +323,17 @@ stack segment pages of a task.
 
 By default, both kinds of memory spreading are off, and memory
 pages are allocated on the node local to where the task is running,
-except perhaps as modified by the tasks NUMA mempolicy or cpuset
+except perhaps as modified by the task's NUMA mempolicy or cpuset
 configuration, so long as sufficient free memory pages are available.
 
 When new cpusets are created, they inherit the memory spread settings
 of their parent.
 
 Setting memory spreading causes allocations for the affected page
-or slab caches to ignore the tasks NUMA mempolicy and be spread
+or slab caches to ignore the task's NUMA mempolicy and be spread
 instead.    Tasks using mbind() or set_mempolicy() calls to set NUMA
 mempolicies will not notice any change in these calls as a result of
-their containing tasks memory spread settings.  If memory spreading
+their containing task's memory spread settings.  If memory spreading
 is turned off, then the currently specified NUMA mempolicy once again
 applies to memory page allocations.
 
@@ -357,7 +357,7 @@ pages from the node returned by cpuset_mem_spread_node().
 
 The cpuset_mem_spread_node() routine is also simple.  It uses the
 value of a per-task rotor cpuset_mem_spread_rotor to select the next
-node in the current tasks mems_allowed to prefer for the allocation.
+node in the current task's mems_allowed to prefer for the allocation.
 
 This memory placement policy is also known (in other contexts) as
 round-robin or interleave.
@@ -594,7 +594,7 @@ is attached, is subtle.
 If a cpuset has its Memory Nodes modified, then for each task attached
 to that cpuset, the next time that the kernel attempts to allocate
 a page of memory for that task, the kernel will notice the change
-in the tasks cpuset, and update its per-task memory placement to
+in the task's cpuset, and update its per-task memory placement to
 remain within the new cpusets memory placement.  If the task was using
 mempolicy MPOL_BIND, and the nodes to which it was bound overlap with
 its new cpuset, then the task will continue to use whatever subset
@@ -603,13 +603,13 @@ was using MPOL_BIND and now none of its MPOL_BIND nodes are allowed
 in the new cpuset, then the task will be essentially treated as if it
 was MPOL_BIND bound to the new cpuset (even though its NUMA placement,
 as queried by get_mempolicy(), doesn't change).  If a task is moved
-from one cpuset to another, then the kernel will adjust the tasks
+from one cpuset to another, then the kernel will adjust the task's
 memory placement, as above, the next time that the kernel attempts
 to allocate a page of memory for that task.
 
 If a cpuset has its 'cpuset.cpus' modified, then each task in that cpuset
 will have its allowed CPU placement changed immediately.  Similarly,
-if a tasks pid is written to another cpusets 'cpuset.tasks' file, then its
+if a task's pid is written to another cpusets 'cpuset.tasks' file, then its
 allowed CPU placement is changed immediately.  If such a task had been
 bound to some subset of its cpuset using the sched_setaffinity() call,
 the task will be allowed to run on any CPU allowed in its new cpuset,
@@ -626,16 +626,16 @@ cpusets memory placement policy 'cpuset.mems' subsequently changes.
 If the cpuset flag file 'cpuset.memory_migrate' is set true, then when
 tasks are attached to that cpuset, any pages that task had
 allocated to it on nodes in its previous cpuset are migrated
-to the tasks new cpuset. The relative placement of the page within
+to the task's new cpuset. The relative placement of the page within
 the cpuset is preserved during these migration operations if possible.
 For example if the page was on the second valid node of the prior cpuset
 then the page will be placed on the second valid node of the new cpuset.
 
-Also if 'cpuset.memory_migrate' is set true, then if that cpusets
+Also if 'cpuset.memory_migrate' is set true, then if that cpuset's
 'cpuset.mems' file is modified, pages allocated to tasks in that
 cpuset, that were on nodes in the previous setting of 'cpuset.mems',
 will be moved to nodes in the new setting of 'mems.'
-Pages that were not in the tasks prior cpuset, or in the cpusets
+Pages that were not in the task's prior cpuset, or in the cpuset's
 prior 'cpuset.mems' setting, will not be moved.
 
 There is an exception to the above.  If hotplug functionality is used
@@ -655,7 +655,7 @@ There is a second exception to the above.  GFP_ATOMIC requests are
 kernel internal allocations that must be satisfied, immediately.
 The kernel may drop some request, in rare cases even panic, if a
 GFP_ATOMIC alloc fails.  If the request cannot be satisfied within
-the current tasks cpuset, then we relax the cpuset, and look for
+the current task's cpuset, then we relax the cpuset, and look for
 memory anywhere we can find it.  It's better to violate the cpuset
 than stress the kernel.
 

Documentation/cgroups/memcg_test.txt

@@ -244,7 +244,7 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 	  we have to check if OLDPAGE/NEWPAGE is a valid page after commit().
 
 8. LRU
-        Each memcg has its own private LRU. Now, it's handling is under global
+        Each memcg has its own private LRU. Now, its handling is under global
 	VM's control (means that it's handled under global zone->lru_lock).
 	Almost all routines around memcg's LRU is called by global LRU's
 	list management functions under zone->lru_lock().

Documentation/cgroups/memory.txt

@@ -263,7 +263,7 @@ some of the pages cached in the cgroup (page cache pages).
 
 4.2 Task migration
 
-When a task migrates from one cgroup to another, it's charge is not
+When a task migrates from one cgroup to another, its charge is not
 carried forward by default. The pages allocated from the original cgroup still
 remain charged to it, the charge is dropped when the page is freed or
 reclaimed.

Documentation/connector/connector.txt

@@ -88,7 +88,7 @@ int cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask);
  int gfp_mask			- GFP mask.
 
  Note: When registering new callback user, connector core assigns
- netlink group to the user which is equal to it's id.idx.
+ netlink group to the user which is equal to its id.idx.
 
 /*****************************************/
 Protocol description.

Documentation/dvb/ci.txt

@@ -41,7 +41,7 @@ This application requires the following to function properly as of now.
 
 * Cards that fall in this category
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-At present the cards that fall in this category are the Twinhan and it's
+At present the cards that fall in this category are the Twinhan and its
 clones, these cards are available as VVMER, Tomato, Hercules, Orange and
 so on.
 

Documentation/dvb/contributors.txt

@@ -1,7 +1,7 @@
 Thanks go to the following people for patches and contributions:
 
 Michael Hunold <[email protected]>
-  for the initial saa7146 driver and it's recent overhaul
+  for the initial saa7146 driver and its recent overhaul
 
 Christian Theiss
   for his work on the initial Linux DVB driver

Documentation/filesystems/Locking

@@ -178,7 +178,7 @@ prototypes:
 locking rules:
 	All except set_page_dirty may block
 
-			BKL	PageLocked(page)	i_sem
+			BKL	PageLocked(page)	i_mutex
 writepage:		no	yes, unlocks (see below)
 readpage:		no	yes, unlocks
 sync_page:		no	maybe
@@ -429,7 +429,7 @@ check_flags:		no
 implementations.  If your fs is not using generic_file_llseek, you
 need to acquire and release the appropriate locks in your ->llseek().
 For many filesystems, it is probably safe to acquire the inode
-semaphore.  Note some filesystems (i.e. remote ones) provide no
+mutex.  Note some filesystems (i.e. remote ones) provide no
 protection for i_size so you will need to use the BKL.
 
 Note: ext2_release() was *the* source of contention on fs-intensive

Documentation/filesystems/autofs4-mount-control.txt

@@ -146,7 +146,7 @@ found to be inadequate, in this case. The Generic Netlink system was
 used for this as raw Netlink would lead to a significant increase in
 complexity. There's no question that the Generic Netlink system is an
 elegant solution for common case ioctl functions but it's not a complete
-replacement probably because it's primary purpose in life is to be a
+replacement probably because its primary purpose in life is to be a
 message bus implementation rather than specifically an ioctl replacement.
 While it would be possible to work around this there is one concern
 that lead to the decision to not use it. This is that the autofs

Documentation/filesystems/ceph.txt

@@ -90,7 +90,7 @@ Mount Options
 	Specify the IP and/or port the client should bind to locally.
 	There is normally not much reason to do this.  If the IP is not
 	specified, the client's IP address is determined by looking at the
-	address it's connection to the monitor originates from.
+	address its connection to the monitor originates from.
 
   wsize=X
 	Specify the maximum write size in bytes.  By default there is no

Documentation/filesystems/dlmfs.txt

@@ -47,7 +47,7 @@ You'll want to start heartbeating on a volume which all the nodes in
 your lockspace can access. The easiest way to do this is via
 ocfs2_hb_ctl (distributed with ocfs2-tools). Right now it requires
 that an OCFS2 file system be in place so that it can automatically
-find it's heartbeat area, though it will eventually support heartbeat
+find its heartbeat area, though it will eventually support heartbeat
 against raw disks.
 
 Please see the ocfs2_hb_ctl and mkfs.ocfs2 manual pages distributed