Merge branch 'slab/urgent' into slab/next

CREDITS

@@ -504,7 +504,7 @@ N: Dominik Brodowski
 E: [email protected]
 W: http://www.brodo.de/
 P: 1024D/725B37C6  190F 3E77 9C89 3B6D BECD  46EE 67C3 0308 725B 37C6
-D: parts of CPUFreq code, ACPI bugfixes
+D: parts of CPUFreq code, ACPI bugfixes, PCMCIA rewrite, cpufrequtils
 S: Tuebingen, Germany
 
 N: Andries Brouwer
@@ -857,6 +857,10 @@ S: One Dell Way
 S: Round Rock, TX  78682
 S: USA
 
+N: Mattia Dongili
+E: [email protected]
+D: cpufrequtils (precursor to cpupowerutils)
+
 N: Ben Dooks
 E: [email protected]
 E: [email protected]
@@ -1883,6 +1887,11 @@ S: Kruislaan 419
 S: 1098 VA Amsterdam 
 S: The Netherlands
 
+N: Goran Koruga
+E: [email protected]
+D: cpufrequtils (precursor to cpupowerutils)
+S: Slovenia
+
 N: Jiri Kosina
 E: [email protected]
 E: [email protected]
@@ -2916,6 +2925,12 @@ S: Schlossbergring 9
 S: 79098 Freiburg
 S: Germany
 
+N: Thomas Renninger
+E: [email protected]
+D: cpupowerutils
+S: SUSE Linux GmbH
+S: Germany
+
 N: Joerg Reuter
 E: [email protected]
 W: http://yaina.de/jreuter/

Documentation/ABI/testing/pstore

@@ -39,3 +39,9 @@ Description:	Generic interface to platform dependent persistent storage.
 		multiple) files based on the record size of the underlying
 		persistent storage until at least this amount is reached.
 		Default is 10 Kbytes.
+
+		Pstore only supports one backend at a time. If multiple
+		backends are available, the preferred backend may be
+		set by passing the pstore.backend= argument to the kernel at
+		boot time.
+

Documentation/ABI/testing/sysfs-platform-ideapad-laptop

@@ -4,3 +4,20 @@ KernelVersion:	2.6.37
 Contact:	"Ike Panhc <[email protected]>"
 Description:
 		Control the power of camera module. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/ideapad/cfg
+Date:		Jun 2011
+KernelVersion:	3.1
+Contact:	"Ike Panhc <[email protected]>"
+Description:
+		Ideapad capability bits.
+		Bit 8-10: 1 - Intel graphic only
+		          2 - ATI graphic only
+		          3 - Nvidia graphic only
+		          4 - Intel and ATI graphic
+		          5 - Intel and Nvidia graphic
+		Bit 16: Bluetooth exist (1 for exist)
+		Bit 17: 3G exist (1 for exist)
+		Bit 18: Wifi exist (1 for exist)
+		Bit 19: Camera exist (1 for exist)
+

Documentation/CodingStyle

@@ -80,22 +80,13 @@ available tools.
 The limit on the length of lines is 80 columns and this is a strongly
 preferred limit.
 
-Statements longer than 80 columns will be broken into sensible chunks.
-Descendants are always substantially shorter than the parent and are placed
-substantially to the right. The same applies to function headers with a long
-argument list. Long strings are as well broken into shorter strings. The
-only exception to this is where exceeding 80 columns significantly increases
-readability and does not hide information.
-
-void fun(int a, int b, int c)
-{
-	if (condition)
-		printk(KERN_WARNING "Warning this is a long printk with "
-						"3 parameters a: %u b: %u "
-						"c: %u \n", a, b, c);
-	else
-		next_statement;
-}
+Statements longer than 80 columns will be broken into sensible chunks, unless
+exceeding 80 columns significantly increases readability and does not hide
+information. Descendants are always substantially shorter than the parent and
+are placed substantially to the right. The same applies to function headers
+with a long argument list. However, never break user-visible strings such as
+printk messages, because that breaks the ability to grep for them.
+
 
 		Chapter 3: Placing Braces and Spaces
 

Documentation/acpi/apei/einj.txt

@@ -48,12 +48,19 @@ directory apei/einj. The following files are provided.
 - param1
   This file is used to set the first error parameter value. Effect of
   parameter depends on error_type specified. For memory error, this is
-  physical memory address.
+  physical memory address.  Only available if param_extension module
+  parameter is specified.
 
 - param2
   This file is used to set the second error parameter value. Effect of
   parameter depends on error_type specified. For memory error, this is
-  physical memory address mask.
+  physical memory address mask.  Only available if param_extension
+  module parameter is specified.
+
+Injecting parameter support is a BIOS version specific extension, that
+is, it only works on some BIOS version.  If you want to use it, please
+make sure your BIOS version has the proper support and specify
+"param_extension=y" in module parameter.
 
 For more information about EINJ, please refer to ACPI specification
 version 4.0, section 17.5.

Documentation/device-mapper/dm-crypt.txt

@@ -4,7 +4,8 @@ dm-crypt
 Device-Mapper's "crypt" target provides transparent encryption of block devices
 using the kernel crypto API.
 
-Parameters: <cipher> <key> <iv_offset> <device path> <offset>
+Parameters: <cipher> <key> <iv_offset> <device path> \
+	      <offset> [<#opt_params> <opt_params>]
 
 <cipher>
     Encryption cipher and an optional IV generation mode.
@@ -37,6 +38,24 @@ Parameters: <cipher> <key> <iv_offset> <device path> <offset>
 <offset>
     Starting sector within the device where the encrypted data begins.
 
+<#opt_params>
+    Number of optional parameters. If there are no optional parameters,
+    the optional paramaters section can be skipped or #opt_params can be zero.
+    Otherwise #opt_params is the number of following arguments.
+
+    Example of optional parameters section:
+        1 allow_discards
+
+allow_discards
+    Block discard requests (a.k.a. TRIM) are passed through the crypt device.
+    The default is to ignore discard requests.
+
+    WARNING: Assess the specific security risks carefully before enabling this
+    option.  For example, allowing discards on encrypted devices may lead to
+    the leak of information about the ciphertext device (filesystem type,
+    used space etc.) if the discarded blocks can be located easily on the
+    device later.
+
 Example scripts
 ===============
 LUKS (Linux Unified Key Setup) is now the preferred way to set up disk

Documentation/device-mapper/dm-flakey.txt

@@ -1,17 +1,53 @@
 dm-flakey
 =========
 
-This target is the same as the linear target except that it returns I/O
-errors periodically.  It's been found useful in simulating failing
-devices for testing purposes.
+This target is the same as the linear target except that it exhibits
+unreliable behaviour periodically.  It's been found useful in simulating
+failing devices for testing purposes.
 
 Starting from the time the table is loaded, the device is available for
-<up interval> seconds, then returns errors for <down interval> seconds,
-and then this cycle repeats.
+<up interval> seconds, then exhibits unreliable behaviour for <down
+interval> seconds, and then this cycle repeats.
 
-Parameters: <dev path> <offset> <up interval> <down interval>
+Also, consider using this in combination with the dm-delay target too,
+which can delay reads and writes and/or send them to different
+underlying devices.
+
+Table parameters
+----------------
+  <dev path> <offset> <up interval> <down interval> \
+    [<num_features> [<feature arguments>]]
+
+Mandatory parameters:
     <dev path>: Full pathname to the underlying block-device, or a
                 "major:minor" device-number.
     <offset>: Starting sector within the device.
     <up interval>: Number of seconds device is available.
     <down interval>: Number of seconds device returns errors.
+
+Optional feature parameters:
+  If no feature parameters are present, during the periods of
+  unreliability, all I/O returns errors.
+
+  drop_writes:
+	All write I/O is silently ignored.
+	Read I/O is handled correctly.
+
+  corrupt_bio_byte <Nth_byte> <direction> <value> <flags>:
+	During <down interval>, replace <Nth_byte> of the data of
+	each matching bio with <value>.
+
+    <Nth_byte>: The offset of the byte to replace.
+		Counting starts at 1, to replace the first byte.
+    <direction>: Either 'r' to corrupt reads or 'w' to corrupt writes.
+		 'w' is incompatible with drop_writes.
+    <value>: The value (from 0-255) to write.
+    <flags>: Perform the replacement only if bio->bi_rw has all the
+	     selected flags set.
+
+Examples:
+  corrupt_bio_byte 32 r 1 0
+	- replaces the 32nd byte of READ bios with the value 1
+
+  corrupt_bio_byte 224 w 0 32
+	- replaces the 224th byte of REQ_META (=32) bios with the value 0

Documentation/device-mapper/dm-raid.txt

@@ -1,70 +1,108 @@
-Device-mapper RAID (dm-raid) is a bridge from DM to MD.  It
-provides a way to use device-mapper interfaces to access the MD RAID
-drivers.
+dm-raid
+-------
 
-As with all device-mapper targets, the nominal public interfaces are the
-constructor (CTR) tables and the status outputs (both STATUSTYPE_INFO
-and STATUSTYPE_TABLE).  The CTR table looks like the following:
+The device-mapper RAID (dm-raid) target provides a bridge from DM to MD.
+It allows the MD RAID drivers to be accessed using a device-mapper
+interface.
 
-1: <s> <l> raid \
-2:      <raid_type> <#raid_params> <raid_params> \
-3:      <#raid_devs> <meta_dev1> <dev1> .. <meta_devN> <devN>
-
-Line 1 contains the standard first three arguments to any device-mapper
-target - the start, length, and target type fields.  The target type in
-this case is "raid".
-
-Line 2 contains the arguments that define the particular raid
-type/personality/level, the required arguments for that raid type, and
-any optional arguments.  Possible raid types include: raid4, raid5_la,
-raid5_ls, raid5_rs, raid6_zr, raid6_nr, and raid6_nc.  (raid1 is
-planned for the future.)  The list of required and optional parameters
-is the same for all the current raid types.  The required parameters are
-positional, while the optional parameters are given as key/value pairs.
-The possible parameters are as follows:
- <chunk_size>           Chunk size in sectors.
- [[no]sync]             Force/Prevent RAID initialization
- [rebuild <idx>]        Rebuild the drive indicated by the index
- [daemon_sleep <ms>]    Time between bitmap daemon work to clear bits
- [min_recovery_rate <kB/sec/disk>]      Throttle RAID initialization
- [max_recovery_rate <kB/sec/disk>]      Throttle RAID initialization
- [max_write_behind <sectors>]           See '-write-behind=' (man mdadm)
- [stripe_cache <sectors>]               Stripe cache size for higher RAIDs
-
-Line 3 contains the list of devices that compose the array in
-metadata/data device pairs.  If the metadata is stored separately, a '-'
-is given for the metadata device position.  If a drive has failed or is
-missing at creation time, a '-' can be given for both the metadata and
-data drives for a given position.
-
-NB. Currently all metadata devices must be specified as '-'.
-
-Examples:
-# RAID4 - 4 data drives, 1 parity
+The target is named "raid" and it accepts the following parameters:
+
+  <raid_type> <#raid_params> <raid_params> \
+    <#raid_devs> <metadata_dev0> <dev0> [.. <metadata_devN> <devN>]
+
+<raid_type>:
+  raid1		RAID1 mirroring
+  raid4		RAID4 dedicated parity disk
+  raid5_la	RAID5 left asymmetric
+		- rotating parity 0 with data continuation
+  raid5_ra	RAID5 right asymmetric
+		- rotating parity N with data continuation
+  raid5_ls	RAID5 left symmetric
+		- rotating parity 0 with data restart
+  raid5_rs 	RAID5 right symmetric
+		- rotating parity N with data restart
+  raid6_zr	RAID6 zero restart
+		- rotating parity zero (left-to-right) with data restart
+  raid6_nr	RAID6 N restart
+		- rotating parity N (right-to-left) with data restart
+  raid6_nc	RAID6 N continue
+		- rotating parity N (right-to-left) with data continuation
+
+  Refererence: Chapter 4 of
+  http://www.snia.org/sites/default/files/SNIA_DDF_Technical_Position_v2.0.pdf
+
+<#raid_params>: The number of parameters that follow.
+
+<raid_params> consists of
+    Mandatory parameters:
+        <chunk_size>: Chunk size in sectors.  This parameter is often known as
+		      "stripe size".  It is the only mandatory parameter and
+		      is placed first.
+
+    followed by optional parameters (in any order):
+	[sync|nosync]   Force or prevent RAID initialization.
+
+	[rebuild <idx>]	Rebuild drive number idx (first drive is 0).
+
+	[daemon_sleep <ms>]
+		Interval between runs of the bitmap daemon that
+		clear bits.  A longer interval means less bitmap I/O but
+		resyncing after a failure is likely to take longer.
+
+	[min_recovery_rate <kB/sec/disk>]  Throttle RAID initialization
+	[max_recovery_rate <kB/sec/disk>]  Throttle RAID initialization
+	[write_mostly <idx>]		   Drive index is write-mostly
+	[max_write_behind <sectors>]       See '-write-behind=' (man mdadm)
+	[stripe_cache <sectors>]           Stripe cache size (higher RAIDs only)
+	[region_size <sectors>]
+		The region_size multiplied by the number of regions is the
+		logical size of the array.  The bitmap records the device
+		synchronisation state for each region.
+
+<#raid_devs>: The number of devices composing the array.
+	Each device consists of two entries.  The first is the device
+	containing the metadata (if any); the second is the one containing the
+	data.
+
+	If a drive has failed or is missing at creation time, a '-' can be
+	given for both the metadata and data drives for a given position.
+
+
+Example tables
+--------------
+# RAID4 - 4 data drives, 1 parity (no metadata devices)
 # No metadata devices specified to hold superblock/bitmap info
 # Chunk size of 1MiB
 # (Lines separated for easy reading)
+
 0 1960893648 raid \
         raid4 1 2048 \
         5 - 8:17 - 8:33 - 8:49 - 8:65 - 8:81
 
-# RAID4 - 4 data drives, 1 parity (no metadata devices)
+# RAID4 - 4 data drives, 1 parity (with metadata devices)
 # Chunk size of 1MiB, force RAID initialization,
 #       min recovery rate at 20 kiB/sec/disk
+
 0 1960893648 raid \
-        raid4 4 2048 min_recovery_rate 20 sync\
-        5 - 8:17 - 8:33 - 8:49 - 8:65 - 8:81
+        raid4 4 2048 sync min_recovery_rate 20 \
+        5 8:17 8:18 8:33 8:34 8:49 8:50 8:65 8:66 8:81 8:82
 
-Performing a 'dmsetup table' should display the CTR table used to
-construct the mapping (with possible reordering of optional
-parameters).
+'dmsetup table' displays the table used to construct the mapping.
+The optional parameters are always printed in the order listed
+above with "sync" or "nosync" always output ahead of the other
+arguments, regardless of the order used when originally loading the table.
+Arguments that can be repeated are ordered by value.
 
-Performing a 'dmsetup status' will yield information on the state and
-health of the array.  The output is as follows:
+'dmsetup status' yields information on the state and health of the
+array.
+The output is as follows:
 1: <s> <l> raid \
 2:      <raid_type> <#devices> <1 health char for each dev> <resync_ratio>
 
-Line 1 is standard DM output.  Line 2 is best shown by example:
+Line 1 is the standard output produced by device-mapper.
+Line 2 is produced by the raid target, and best explained by example:
         0 1960893648 raid raid4 5 AAAAA 2/490221568
 Here we can see the RAID type is raid4, there are 5 devices - all of
 which are 'A'live, and the array is 2/490221568 complete with recovery.
+Faulty or missing devices are marked 'D'.  Devices that are out-of-sync
+are marked 'a'.

Documentation/devicetree/bindings/gpio/gpio_keys.txt

@@ -10,7 +10,7 @@ Optional properties:
 Each button (key) is represented as a sub-node of "gpio-keys":
 Subnode properties:
 
-	- gpios: OF devcie-tree gpio specificatin.
+	- gpios: OF device-tree gpio specification.
 	- label: Descriptive name of the key.
 	- linux,code: Keycode to emit.