Merge branch 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/l…

…inux/kernel/git/tip/linux-2.6-tip

This merges branches irq/genirq, irq/sparseirq-v4, timers/hpet-percpu
and x86/uv.

The sparseirq branch is just preliminary groundwork: no sparse IRQs are
actually implemented by this tree anymore - just the new APIs are added
while keeping the old way intact as well (the new APIs map 1:1 to
irq_desc[]).  The 'real' sparse IRQ support will then be a relatively
small patch ontop of this - with a v2.6.29 merge target.

* 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (178 commits)
  genirq: improve include files
  intr_remapping: fix typo
  io_apic: make irq_mis_count available on 64-bit too
  genirq: fix name space collisions of nr_irqs in arch/*
  genirq: fix name space collision of nr_irqs in autoprobe.c
  genirq: use iterators for irq_desc loops
  proc: fixup irq iterator
  genirq: add reverse iterator for irq_desc
  x86: move ack_bad_irq() to irq.c
  x86: unify show_interrupts() and proc helpers
  x86: cleanup show_interrupts
  genirq: cleanup the sparseirq modifications
  genirq: remove artifacts from sparseirq removal
  genirq: revert dynarray
  genirq: remove irq_to_desc_alloc
  genirq: remove sparse irq code
  genirq: use inline function for irq_to_desc
  genirq: consolidate nr_irqs and for_each_irq_desc()
  x86: remove sparse irq from Kconfig
  genirq: define nr_irqs for architectures with GENERIC_HARDIRQS=n
  ...

arch/alpha/kernel/sys_sable.c

@@ -47,7 +47,7 @@ typedef struct irq_swizzle_struct
 
 static irq_swizzle_t *sable_lynx_irq_swizzle;
 
-static void sable_lynx_init_irq(int nr_irqs);
+static void sable_lynx_init_irq(int nr_of_irqs);
 
 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE)
 
@@ -530,11 +530,11 @@ sable_lynx_srm_device_interrupt(unsigned long vector)
 }
 
 static void __init
-sable_lynx_init_irq(int nr_irqs)
+sable_lynx_init_irq(int nr_of_irqs)
 {
 	long i;
 
-	for (i = 0; i < nr_irqs; ++i) {
+	for (i = 0; i < nr_of_irqs; ++i) {
 		irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
 		irq_desc[i].chip = &sable_lynx_irq_type;
 	}

arch/arm/mach-ixp2000/ixdp2x00.c

@@ -143,7 +143,7 @@ static struct irq_chip ixdp2x00_cpld_irq_chip = {
 	.unmask	= ixdp2x00_irq_unmask
 };
 
-void __init ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *mask_reg, unsigned long nr_irqs)
+void __init ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *mask_reg, unsigned long nr_of_irqs)
 {
 	unsigned int irq;
 
@@ -154,7 +154,7 @@ void __init ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigne
 
 	board_irq_stat = stat_reg;
 	board_irq_mask = mask_reg;
-	board_irq_count = nr_irqs;
+	board_irq_count = nr_of_irqs;
 
 	*board_irq_mask = 0xffffffff;
 

arch/arm/mach-omap2/irq.c

@@ -119,7 +119,7 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
 
 void __init omap_init_irq(void)
 {
-	unsigned long nr_irqs = 0;
+	unsigned long nr_of_irqs = 0;
 	unsigned int nr_banks = 0;
 	int i;
 
@@ -133,14 +133,14 @@ void __init omap_init_irq(void)
 
 		omap_irq_bank_init_one(bank);
 
-		nr_irqs += bank->nr_irqs;
+		nr_of_irqs += bank->nr_irqs;
 		nr_banks++;
 	}
 
 	printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n",
-	       nr_irqs, nr_banks, nr_banks > 1 ? "s" : "");
+	       nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : "");
 
-	for (i = 0; i < nr_irqs; i++) {
+	for (i = 0; i < nr_of_irqs; i++) {
 		set_irq_chip(i, &omap_irq_chip);
 		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID);

arch/avr32/mach-at32ap/extint.c

@@ -191,7 +191,7 @@ static int __init eic_probe(struct platform_device *pdev)
 	struct eic *eic;
 	struct resource *regs;
 	unsigned int i;
-	unsigned int nr_irqs;
+	unsigned int nr_of_irqs;
 	unsigned int int_irq;
 	int ret;
 	u32 pattern;
@@ -224,15 +224,15 @@ static int __init eic_probe(struct platform_device *pdev)
 	eic_writel(eic, IDR, ~0UL);
 	eic_writel(eic, MODE, ~0UL);
 	pattern = eic_readl(eic, MODE);
-	nr_irqs = fls(pattern);
+	nr_of_irqs = fls(pattern);
 
 	/* Trigger on low level unless overridden by driver */
 	eic_writel(eic, EDGE, 0UL);
 	eic_writel(eic, LEVEL, 0UL);
 
 	eic->chip = &eic_chip;
 
-	for (i = 0; i < nr_irqs; i++) {
+	for (i = 0; i < nr_of_irqs; i++) {
 		set_irq_chip_and_handler(eic->first_irq + i, &eic_chip,
 					 handle_level_irq);
 		set_irq_chip_data(eic->first_irq + i, eic);
@@ -256,7 +256,7 @@ static int __init eic_probe(struct platform_device *pdev)
 		 eic->regs, int_irq);
 	dev_info(&pdev->dev,
 		 "Handling %u external IRQs, starting with IRQ %u\n",
-		 nr_irqs, eic->first_irq);
+		 nr_of_irqs, eic->first_irq);
 
 	return 0;
 

arch/x86/Kconfig

@@ -1242,14 +1242,6 @@ config EFI
   	resultant kernel should continue to boot on existing non-EFI
   	platforms.
 
-config IRQBALANCE
-	def_bool y
-	prompt "Enable kernel irq balancing"
-	depends on X86_32 && SMP && X86_IO_APIC
-	help
-	  The default yes will allow the kernel to do irq load balancing.
-	  Saying no will keep the kernel from doing irq load balancing.
-
 config SECCOMP
 	def_bool y
 	prompt "Enable seccomp to safely compute untrusted bytecode"

arch/x86/configs/i386_defconfig

@@ -287,7 +287,6 @@ CONFIG_MTRR=y
 # CONFIG_MTRR_SANITIZER is not set
 CONFIG_X86_PAT=y
 CONFIG_EFI=y
-# CONFIG_IRQBALANCE is not set
 CONFIG_SECCOMP=y
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_250 is not set

arch/x86/kernel/Makefile

@@ -23,7 +23,7 @@ CFLAGS_hpet.o		:= $(nostackp)
 CFLAGS_tsc.o		:= $(nostackp)
 
 obj-y			:= process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
-obj-y			+= traps.o irq_$(BITS).o dumpstack_$(BITS).o
+obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
 obj-y			+= time_$(BITS).o ioport.o ldt.o
 obj-y			+= setup.o i8259.o irqinit_$(BITS).o setup_percpu.o
 obj-$(CONFIG_X86_VISWS)	+= visws_quirks.o
@@ -60,8 +60,8 @@ obj-$(CONFIG_X86_32_SMP)	+= smpcommon.o
 obj-$(CONFIG_X86_64_SMP)	+= tsc_sync.o smpcommon.o
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_$(BITS).o
 obj-$(CONFIG_X86_MPPARSE)	+= mpparse.o
-obj-$(CONFIG_X86_LOCAL_APIC)	+= apic_$(BITS).o nmi.o
-obj-$(CONFIG_X86_IO_APIC)	+= io_apic_$(BITS).o
+obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o nmi.o
+obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_X86_REBOOTFIXUPS)	+= reboot_fixups_32.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec_$(BITS).o
@@ -108,7 +108,7 @@ obj-$(CONFIG_MICROCODE)			+= microcode.o
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
         obj-y				+= genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o
-	obj-y				+= bios_uv.o
+	obj-y				+= bios_uv.o uv_irq.o uv_sysfs.o
         obj-y				+= genx2apic_cluster.o
         obj-y				+= genx2apic_phys.o
         obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o

arch/x86/kernel/acpi/boot.c

@@ -1256,7 +1256,7 @@ static int __init acpi_parse_madt_ioapic_entries(void)
 
 	count =
 	    acpi_table_parse_madt(ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr,
-				  NR_IRQ_VECTORS);
+				  nr_irqs);
 	if (count < 0) {
 		printk(KERN_ERR PREFIX
 		       "Error parsing interrupt source overrides entry\n");
@@ -1276,7 +1276,7 @@ static int __init acpi_parse_madt_ioapic_entries(void)
 
 	count =
 	    acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src,
-				  NR_IRQ_VECTORS);
+				  nr_irqs);
 	if (count < 0) {
 		printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
 		/* TBD: Cleanup to allow fallback to MPS */