Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/…

…benh/powerpc

Pull powerpc updates from Benjamin Herrenschmidt:
 "Here are the powerpc goodies for 3.5.  Main highlights are:

   - Support for the NX crypto engine in Power7+
   - A bunch of Anton goodness, including some micro optimization of our
     syscall entry on Power7
   - I converted a pile of our thermal control drivers to the new i2c
     APIs (essentially turning the old therm_pm72 into a proper set of
     windfarm drivers).  That's one more step toward removing the
     deprecated i2c APIs, there's still a few drivers to fix, but we are
     getting close
   - kexec/kdump support for 47x embedded cores

  The big missing thing here is no updates from Freescale.  Not sure
  what's up here, but with Kumar not working for them anymore things are
  a bit in a state of flux in that area."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (71 commits)
  powerpc: Fix irq distribution
  Revert "powerpc/hw-breakpoint: Use generic hw-breakpoint interfaces for new PPC ptrace flags"
  powerpc: Fixing a cputhread code documentation
  powerpc/crypto: Enable the PFO-based encryption device
  powerpc/crypto: Build files for the nx device driver
  powerpc/crypto: debugfs routines and docs for the nx device driver
  powerpc/crypto: SHA512 hash routines for nx encryption
  powerpc/crypto: SHA256 hash routines for nx encryption
  powerpc/crypto: AES-XCBC mode routines for nx encryption
  powerpc/crypto: AES-GCM mode routines for nx encryption
  powerpc/crypto: AES-ECB mode routines for nx encryption
  powerpc/crypto: AES-CTR mode routines for nx encryption
  powerpc/crypto: AES-CCM mode routines for nx encryption
  powerpc/crypto: AES-CBC mode routines for nx encryption
  powerpc/crypto: nx driver code supporting nx encryption
  powerpc/pseries: Enable the PFO-based RNG accelerator
  powerpc/pseries/hwrng: PFO-based hwrng driver
  powerpc/pseries: Add PFO support to the VIO bus
  powerpc/pseries: Add pseries update notifier for OFDT prop changes
  powerpc/pseries: Add new hvcall constants to support PFO
  ...

Documentation/ABI/testing/debugfs-pfo-nx-crypto

@@ -0,0 +1,45 @@
+What:		/sys/kernel/debug/nx-crypto/*
+Date:		March 2012
+KernelVersion:	3.4
+Contact:	Kent Yoder <[email protected]>
+Description:
+
+  These debugfs interfaces are built by the nx-crypto driver, built in
+arch/powerpc/crypto/nx.
+
+Error Detection
+===============
+
+errors:
+- A u32 providing a total count of errors since the driver was loaded. The
+only errors counted here are those returned from the hcall, H_COP_OP.
+
+last_error:
+- The most recent non-zero return code from the H_COP_OP hcall. -EBUSY is not
+recorded here (the hcall will retry until -EBUSY goes away).
+
+last_error_pid:
+- The process ID of the process who received the most recent error from the
+hcall.
+
+Device Use
+==========
+
+aes_bytes:
+- The total number of bytes encrypted using AES in any of the driver's
+supported modes.
+
+aes_ops:
+- The total number of AES operations submitted to the hardware.
+
+sha256_bytes:
+- The total number of bytes hashed by the hardware using SHA-256.
+
+sha256_ops:
+- The total number of SHA-256 operations submitted to the hardware.
+
+sha512_bytes:
+- The total number of bytes hashed by the hardware using SHA-512.
+
+sha512_ops:
+- The total number of SHA-512 operations submitted to the hardware.

arch/powerpc/Kconfig

@@ -350,7 +350,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
 
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
-	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !PPC_47x)) && EXPERIMENTAL
+	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP)) && EXPERIMENTAL
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -367,7 +367,7 @@ config KEXEC
 
 config CRASH_DUMP
 	bool "Build a kdump crash kernel"
-	depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP && !PPC_47x)
+	depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP)
 	select RELOCATABLE if PPC64 || 44x
 	select DYNAMIC_MEMSTART if FSL_BOOKE
 	help

arch/powerpc/Makefile

@@ -69,39 +69,28 @@ LDFLAGS_vmlinux	:= $(LDFLAGS_vmlinux-y)
 
 CFLAGS-$(CONFIG_PPC64)	:= -mminimal-toc -mtraceback=no -mcall-aixdesc
 CFLAGS-$(CONFIG_PPC32)	:= -ffixed-r2 -mmultiple
+
+CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power7,-mtune=power4)
+CFLAGS-$(CONFIG_CELL_CPU) += $(call cc-option,-mcpu=cell)
+CFLAGS-$(CONFIG_POWER4_CPU) += $(call cc-option,-mcpu=power4)
+CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5)
+CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6)
+CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7)
+
+CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell)
+
 KBUILD_CPPFLAGS	+= -Iarch/$(ARCH)
 KBUILD_AFLAGS	+= -Iarch/$(ARCH)
 KBUILD_CFLAGS	+= -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y)
 CPP		= $(CC) -E $(KBUILD_CFLAGS)
 
 CHECKFLAGS	+= -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__
 
-ifeq ($(CONFIG_PPC64),y)
-GCC_BROKEN_VEC	:= $(call cc-ifversion, -lt, 0400, y)
-
-ifeq ($(CONFIG_POWER4_ONLY),y)
-ifeq ($(CONFIG_ALTIVEC),y)
-ifeq ($(GCC_BROKEN_VEC),y)
-	KBUILD_CFLAGS += $(call cc-option,-mcpu=970)
-else
-	KBUILD_CFLAGS += $(call cc-option,-mcpu=power4)
-endif
-else
-	KBUILD_CFLAGS += $(call cc-option,-mcpu=power4)
-endif
-else
-	KBUILD_CFLAGS += $(call cc-option,-mtune=power4)
-endif
-endif
-
 KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
 
-ifeq ($(CONFIG_TUNE_CELL),y)
-	KBUILD_CFLAGS += $(call cc-option,-mtune=cell)
-endif
-
-# No AltiVec instruction when building kernel
+# No AltiVec or VSX instructions when building kernel
 KBUILD_CFLAGS += $(call cc-option,-mno-altivec)
+KBUILD_CFLAGS += $(call cc-option,-mno-vsx)
 
 # No SPE instruction when building kernel
 # (We use all available options to help semi-broken compilers)
@@ -160,6 +149,7 @@ core-$(CONFIG_KVM) 		+= arch/powerpc/kvm/
 core-$(CONFIG_PERF_EVENTS)	+= arch/powerpc/perf/
 
 drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
+drivers-$(CONFIG_CRYPTO_DEV_NX) += drivers/crypto/nx/
 
 # Default to zImage, override when needed
 all: zImage
@@ -234,10 +224,11 @@ archprepare: checkbin
 # Use the file '.tmp_gas_check' for binutils tests, as gas won't output
 # to stdout and these checks are run even on install targets.
 TOUT	:= .tmp_gas_check
-# Ensure this is binutils 2.12.1 (or 2.12.90.0.7) or later for altivec
-# instructions.
-# gcc-3.4 and binutils-2.14 are a fatal combination.
 
+# Check gcc and binutils versions:
+# - gcc-3.4 and binutils-2.14 are a fatal combination
+# - Require gcc 4.0 or above on 64-bit
+# - gcc-4.2.0 has issues compiling modules on 64-bit
 checkbin:
 	@if test "$(call cc-version)" = "0304" ; then \
 		if ! /bin/echo mftb 5 | $(AS) -v -mppc -many -o $(TOUT) >/dev/null 2>&1 ; then \
@@ -247,6 +238,12 @@ checkbin:
 			false; \
 		fi ; \
 	fi
+	@if test "$(call cc-version)" -lt "0400" \
+	    && test "x${CONFIG_PPC64}" = "xy" ; then \
+                echo -n "Sorry, GCC v4.0 or above is required to build " ; \
+                echo "the 64-bit powerpc kernel." ; \
+                false ; \
+        fi
 	@if test "$(call cc-fullversion)" = "040200" \
 	    && test "x${CONFIG_MODULES}${CONFIG_PPC64}" = "xyy" ; then \
 		echo -n '*** GCC-4.2.0 cannot compile the 64-bit powerpc ' ; \

arch/powerpc/boot/dts/bluestone.dts

@@ -373,5 +373,30 @@
 				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
 				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
 		};
+
+		MSI: ppc4xx-msi@C10000000 {
+			compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
+			reg = < 0xC 0x10000000 0x100
+				0xC 0x10000000 0x100>;
+			sdr-base = <0x36C>;
+			msi-data = <0x00004440>;
+			msi-mask = <0x0000ffe0>;
+			interrupts =<0 1 2 3 4 5 6 7>;
+			interrupt-parent = <&MSI>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			msi-available-ranges = <0x0 0x100>;
+			interrupt-map = <
+				0 &UIC3 0x18 1
+				1 &UIC3 0x19 1
+				2 &UIC3 0x1A 1
+				3 &UIC3 0x1B 1
+				4 &UIC3 0x1C 1
+				5 &UIC3 0x1D 1
+				6 &UIC3 0x1E 1
+				7 &UIC3 0x1F 1
+			>;
+		};
 	};
 };

arch/powerpc/configs/g5_defconfig

@@ -1,5 +1,4 @@
 CONFIG_PPC64=y
-CONFIG_POWER4_ONLY=y
 CONFIG_ALTIVEC=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4

arch/powerpc/configs/maple_defconfig

@@ -1,5 +1,4 @@
 CONFIG_PPC64=y
-CONFIG_POWER4_ONLY=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
 CONFIG_EXPERIMENTAL=y

arch/powerpc/configs/pasemi_defconfig

@@ -1,5 +1,4 @@
 CONFIG_PPC64=y
-CONFIG_POWER4_ONLY=y
 CONFIG_ALTIVEC=y
 # CONFIG_VIRT_CPU_ACCOUNTING is not set
 CONFIG_SMP=y

arch/powerpc/configs/ps3_defconfig

@@ -6,7 +6,6 @@ CONFIG_NR_CPUS=2
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_SPARSE_IRQ=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EMBEDDED=y
@@ -25,7 +24,6 @@ CONFIG_PS3_DISK=y
 CONFIG_PS3_ROM=y
 CONFIG_PS3_FLASH=y
 CONFIG_PS3_VRAM=m
-CONFIG_PS3_LPM=m
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
 CONFIG_HIGH_RES_TIMERS=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
@@ -53,8 +51,6 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_DIAG is not set
 CONFIG_IPV6=y
 CONFIG_BT=m
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
@@ -63,7 +59,6 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
 CONFIG_BT_HCIBTUSB=m
 CONFIG_CFG80211=m
-# CONFIG_WIRELESS_EXT_SYSFS is not set
 CONFIG_MAC80211=m
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
@@ -181,7 +176,6 @@ CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_WRITECOUNT=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_LIST=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_CRYPTO_CCM=m

arch/powerpc/include/asm/asm-compat.h

@@ -29,18 +29,9 @@
 #define PPC_LLARX(t, a, b, eh)	PPC_LDARX(t, a, b, eh)
 #define PPC_STLCX	stringify_in_c(stdcx.)
 #define PPC_CNTLZL	stringify_in_c(cntlzd)
+#define PPC_MTOCRF(FXM, RS) MTOCRF((FXM), (RS))
 #define PPC_LR_STKOFF	16
 #define PPC_MIN_STKFRM	112
-
-/* Move to CR, single-entry optimized version. Only available
- * on POWER4 and later.
- */
-#ifdef CONFIG_POWER4_ONLY
-#define PPC_MTOCRF	stringify_in_c(mtocrf)
-#else
-#define PPC_MTOCRF	stringify_in_c(mtcrf)
-#endif
-
 #else /* 32-bit */
 
 /* operations for longs and pointers */

arch/powerpc/include/asm/cputhreads.h

@@ -9,7 +9,7 @@
  * Note: This implementation is limited to a power of 2 number of
  * threads per core and the same number for each core in the system
  * (though it would work if some processors had less threads as long
- * as the CPU numbers are still allocated, just not brought offline).
+ * as the CPU numbers are still allocated, just not brought online).
  *
  * However, the API allows for a different implementation in the future
  * if needed, as long as you only use the functions and not the variables

arch/powerpc/include/asm/hvcall.h

@@ -77,8 +77,27 @@
 #define H_MR_CONDITION  -43
 #define H_NOT_ENOUGH_RESOURCES -44
 #define H_R_STATE       -45
-#define H_RESCINDEND    -46
-#define H_MULTI_THREADS_ACTIVE -9005
+#define H_RESCINDED     -46
+#define H_P2		-55
+#define H_P3		-56
+#define H_P4		-57
+#define H_P5		-58
+#define H_P6		-59
+#define H_P7		-60
+#define H_P8		-61
+#define H_P9		-62
+#define H_TOO_BIG	-64
+#define H_OVERLAP	-68
+#define H_INTERRUPT	-69
+#define H_BAD_DATA	-70
+#define H_NOT_ACTIVE	-71
+#define H_SG_LIST	-72
+#define H_OP_MODE	-73
+#define H_COP_HW	-74
+#define H_UNSUPPORTED_FLAG_START	-256
+#define H_UNSUPPORTED_FLAG_END		-511
+#define H_MULTI_THREADS_ACTIVE	-9005
+#define H_OUTSTANDING_COP_OPS	-9006
 
 
 /* Long Busy is a condition that can be returned by the firmware
@@ -240,6 +259,8 @@
 #define H_GET_MPP		0x2D4
 #define H_HOME_NODE_ASSOCIATIVITY 0x2EC
 #define H_BEST_ENERGY		0x2F4
+#define H_RANDOM		0x300
+#define H_COP			0x304
 #define H_GET_MPP_X		0x314
 #define MAX_HCALL_OPCODE	H_GET_MPP_X