Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3424/2: ixp23xx: fix uncompress.h for recent CRLF decompressor change
  [ARM] 3434/1: pxa i2s amsl define
  [ARM] 3425/1: xsc3: need to include pgtable-hwdef.h
  [ARM] Allow un-muxed syscalls to be available for everyone
  [ARM] 3420/1: Missing clobber in example code
  [ARM] nommu: fixups for the exception vectors
  [ARM] nommu: add nommu specific Kconfig and MMUEXT variable in Makefile
  [ARM] nommu: start-up code
  [ARM] nommu: MPU support in boot/compressed/head.S

arch/arm/Kconfig

@@ -77,6 +77,14 @@ config FIQ
 config ARCH_MTD_XIP
 	bool
 
+config VECTORS_BASE
+	hex
+	default 0xffff0000 if MMU
+	default DRAM_BASE if REMAP_VECTORS_TO_RAM
+	default 0x00000000
+	help
+	  The base address of exception vectors.
+
 source "init/Kconfig"
 
 menu "System Type"

arch/arm/Kconfig-nommu

@@ -0,0 +1,44 @@
+#
+# Kconfig for uClinux(non-paged MM) depend configurations
+# Hyok S. Choi <[email protected]>
+# 
+
+config SET_MEM_PARAM
+	bool "Set flash/sdram size and base addr"
+	help
+	 Say Y to manually set the base addresses and sizes.
+	 otherwise, the default values are assigned.
+
+config DRAM_BASE
+	hex '(S)DRAM Base Address' if SET_MEM_PARAM
+	default 0x00800000
+
+config DRAM_SIZE
+	hex '(S)DRAM SIZE' if SET_MEM_PARAM
+	default 0x00800000
+
+config FLASH_MEM_BASE
+	hex 'FLASH Base Address' if SET_MEM_PARAM
+	default 0x00400000
+
+config FLASH_SIZE
+	hex 'FLASH Size' if SET_MEM_PARAM
+	default 0x00400000
+
+config REMAP_VECTORS_TO_RAM
+	bool 'Install vectors to the begining of RAM' if DRAM_BASE
+	depends on DRAM_BASE
+	help
+	  The kernel needs to change the hardware exception vectors.
+	  In nommu mode, the hardware exception vectors are normally
+	  placed at address 0x00000000. However, this region may be
+	  occupied by read-only memory depending on H/W design.
+
+	  If the region contains read-write memory, say 'n' here.
+
+	  If your CPU provides a remap facility which allows the exception
+	  vectors to be mapped to writable memory, say 'n' here.
+
+	  Otherwise, say 'y' here.  In this case, the kernel will require
+	  external support to redirect the hardware exception vectors to
+	  the writable versions located at DRAM_BASE.

arch/arm/Makefile

@@ -20,6 +20,11 @@ GZFLAGS		:=-9
 # Select a platform tht is kept up-to-date
 KBUILD_DEFCONFIG := versatile_defconfig
 
+# defines filename extension depending memory manement type.
+ifeq ($(CONFIG_MMU),)
+MMUEXT		:= -nommu
+endif
+
 ifeq ($(CONFIG_FRAME_POINTER),y)
 CFLAGS		+=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
 endif
@@ -73,7 +78,7 @@ AFLAGS		+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
 CHECKFLAGS	+= -D__arm__
 
 #Default value
-head-y		:= arch/arm/kernel/head.o arch/arm/kernel/init_task.o
+head-y		:= arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
 textofs-y	:= 0x00008000
 
  machine-$(CONFIG_ARCH_RPC)	   := rpc
@@ -133,7 +138,7 @@ else
 MACHINE  :=
 endif
 
-export	TEXT_OFFSET GZFLAGS
+export	TEXT_OFFSET GZFLAGS MMUEXT
 
 # Do we have FASTFPE?
 FASTFPE		:=arch/arm/fastfpe

arch/arm/boot/compressed/head.S

@@ -2,6 +2,7 @@
  *  linux/arch/arm/boot/compressed/head.S
  *
  *  Copyright (C) 1996-2002 Russell King
+ *  Copyright (C) 2004 Hyok S. Choi (MPU support)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -320,6 +321,62 @@ params:		ldr	r0, =params_phys
 cache_on:	mov	r3, #8			@ cache_on function
 		b	call_cache_fn
 
+/*
+ * Initialize the highest priority protection region, PR7
+ * to cover all 32bit address and cacheable and bufferable.
+ */
+__armv4_mpu_cache_on:
+		mov	r0, #0x3f		@ 4G, the whole
+		mcr	p15, 0, r0, c6, c7, 0	@ PR7 Area Setting
+		mcr 	p15, 0, r0, c6, c7, 1
+
+		mov	r0, #0x80		@ PR7
+		mcr	p15, 0, r0, c2, c0, 0	@ D-cache on
+		mcr	p15, 0, r0, c2, c0, 1	@ I-cache on
+		mcr	p15, 0, r0, c3, c0, 0	@ write-buffer on
+
+		mov	r0, #0xc000
+		mcr	p15, 0, r0, c5, c0, 1	@ I-access permission
+		mcr	p15, 0, r0, c5, c0, 0	@ D-access permission
+
+		mov	r0, #0
+		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
+		mcr	p15, 0, r0, c7, c5, 0	@ flush(inval) I-Cache
+		mcr	p15, 0, r0, c7, c6, 0	@ flush(inval) D-Cache
+		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+						@ ...I .... ..D. WC.M
+		orr	r0, r0, #0x002d		@ .... .... ..1. 11.1
+		orr	r0, r0, #0x1000		@ ...1 .... .... ....
+
+		mcr	p15, 0, r0, c1, c0, 0	@ write control reg
+
+		mov	r0, #0
+		mcr	p15, 0, r0, c7, c5, 0	@ flush(inval) I-Cache
+		mcr	p15, 0, r0, c7, c6, 0	@ flush(inval) D-Cache
+		mov	pc, lr
+
+__armv3_mpu_cache_on:
+		mov	r0, #0x3f		@ 4G, the whole
+		mcr	p15, 0, r0, c6, c7, 0	@ PR7 Area Setting
+
+		mov	r0, #0x80		@ PR7
+		mcr	p15, 0, r0, c2, c0, 0	@ cache on
+		mcr	p15, 0, r0, c3, c0, 0	@ write-buffer on
+
+		mov	r0, #0xc000
+		mcr	p15, 0, r0, c5, c0, 0	@ access permission
+
+		mov	r0, #0
+		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
+		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+						@ .... .... .... WC.M
+		orr	r0, r0, #0x000d		@ .... .... .... 11.1
+		mov	r0, #0
+		mcr	p15, 0, r0, c1, c0, 0	@ write control reg
+
+		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
+		mov	pc, lr
+
 __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		bic	r3, r3, #0xff		@ Align the pointer
 		bic	r3, r3, #0x3f00
@@ -496,6 +553,18 @@ proc_types:
 		b	__armv4_mmu_cache_off
 		mov	pc, lr
 
+		.word	0x41007400		@ ARM74x
+		.word	0xff00ff00
+		b	__armv3_mpu_cache_on
+		b	__armv3_mpu_cache_off
+		b	__armv3_mpu_cache_flush
+
+		.word	0x41009400		@ ARM94x
+		.word	0xff00ff00
+		b	__armv4_mpu_cache_on
+		b	__armv4_mpu_cache_off
+		b	__armv4_mpu_cache_flush
+
 		.word	0x00007000		@ ARM7 IDs
 		.word	0x0000f000
 		mov	pc, lr
@@ -562,6 +631,24 @@ proc_types:
 cache_off:	mov	r3, #12			@ cache_off function
 		b	call_cache_fn
 
+__armv4_mpu_cache_off:
+		mrc	p15, 0, r0, c1, c0
+		bic	r0, r0, #0x000d
+		mcr	p15, 0, r0, c1, c0	@ turn MPU and cache off
+		mov	r0, #0
+		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
+		mcr	p15, 0, r0, c7, c6, 0	@ flush D-Cache
+		mcr	p15, 0, r0, c7, c5, 0	@ flush I-Cache
+		mov	pc, lr
+
+__armv3_mpu_cache_off:
+		mrc	p15, 0, r0, c1, c0
+		bic	r0, r0, #0x000d
+		mcr	p15, 0, r0, c1, c0, 0	@ turn MPU and cache off
+		mov	r0, #0
+		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
+		mov	pc, lr
+
 __armv4_mmu_cache_off:
 		mrc	p15, 0, r0, c1, c0
 		bic	r0, r0, #0x000d
@@ -601,6 +688,24 @@ cache_clean_flush:
 		mov	r3, #16
 		b	call_cache_fn
 
+__armv4_mpu_cache_flush:
+		mov	r2, #1
+		mov	r3, #0
+		mcr	p15, 0, ip, c7, c6, 0	@ invalidate D cache
+		mov	r1, #7 << 5		@ 8 segments
+1:		orr	r3, r1, #63 << 26	@ 64 entries
+2:		mcr	p15, 0, r3, c7, c14, 2	@ clean & invalidate D index
+		subs	r3, r3, #1 << 26
+		bcs	2b			@ entries 63 to 0
+		subs 	r1, r1, #1 << 5
+		bcs	1b			@ segments 7 to 0
+
+		teq	r2, #0
+		mcrne	p15, 0, ip, c7, c5, 0	@ invalidate I cache
+		mcr	p15, 0, ip, c7, c10, 4	@ drain WB
+		mov	pc, lr
+
+
 __armv6_mmu_cache_flush:
 		mov	r1, #0
 		mcr	p15, 0, r1, c7, c14, 0	@ clean+invalidate D
@@ -638,6 +743,7 @@ no_cache_id:
 		mov	pc, lr
 
 __armv3_mmu_cache_flush:
+__armv3_mpu_cache_flush:
 		mov	r1, #0
 		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
 		mov	pc, lr

arch/arm/kernel/entry-armv.S

@@ -666,7 +666,7 @@ __kuser_helper_start:
  *
  * #define __kernel_dmb() \
  *         asm volatile ( "mov r0, #0xffff0fff; mov lr, pc; sub pc, r0, #95" \
- *	        : : : "lr","cc" )
+ *	        : : : "r0", "lr","cc" )
  */
 
 __kuser_memory_barrier:				@ 0xffff0fa0