Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Two trivial overlapping changes conflicts in MPLS and mlx5.

Signed-off-by: David S. Miller <[email protected]>

Documentation/devicetree/bindings/net/mediatek-net.txt

@@ -7,7 +7,7 @@ have dual GMAC each represented by a child node..
 * Ethernet controller node
 
 Required properties:
-- compatible: Should be "mediatek,mt7623-eth"
+- compatible: Should be "mediatek,mt2701-eth"
 - reg: Address and length of the register set for the device
 - interrupts: Should contain the three frame engines interrupts in numeric
 	order. These are fe_int0, fe_int1 and fe_int2.

Documentation/devicetree/bindings/net/phy.txt

@@ -19,8 +19,9 @@ Optional Properties:
   specifications. If neither of these are specified, the default is to
   assume clause 22.
 
-  If the phy's identifier is known then the list may contain an entry
-  of the form: "ethernet-phy-idAAAA.BBBB" where
+  If the PHY reports an incorrect ID (or none at all) then the
+  "compatible" list may contain an entry with the correct PHY ID in the
+  form: "ethernet-phy-idAAAA.BBBB" where
      AAAA - The value of the 16 bit Phy Identifier 1 register as
             4 hex digits. This is the chip vendor OUI bits 3:18
      BBBB - The value of the 16 bit Phy Identifier 2 register as

Documentation/devicetree/bindings/spi/sh-msiof.txt

@@ -1,17 +1,23 @@
 Renesas MSIOF spi controller
 
 Required properties:
-- compatible           : "renesas,msiof-<soctype>" for SoCs,
-			 "renesas,sh-msiof" for SuperH, or
-			 "renesas,sh-mobile-msiof" for SH Mobile series.
-			 Examples with soctypes are:
-			 "renesas,msiof-r8a7790" (R-Car H2)
+- compatible           : "renesas,msiof-r8a7790" (R-Car H2)
 			 "renesas,msiof-r8a7791" (R-Car M2-W)
 			 "renesas,msiof-r8a7792" (R-Car V2H)
 			 "renesas,msiof-r8a7793" (R-Car M2-N)
 			 "renesas,msiof-r8a7794" (R-Car E2)
 			 "renesas,msiof-r8a7796" (R-Car M3-W)
 			 "renesas,msiof-sh73a0" (SH-Mobile AG5)
+			 "renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device)
+			 "renesas,rcar-gen2-msiof" (generic R-Car Gen2 compatible device)
+			 "renesas,rcar-gen3-msiof" (generic R-Car Gen3 compatible device)
+			 "renesas,sh-msiof"      (deprecated)
+
+			 When compatible with the generic version, nodes
+			 must list the SoC-specific version corresponding
+			 to the platform first followed by the generic
+			 version.
+
 - reg                  : A list of offsets and lengths of the register sets for
 			 the device.
 			 If only one register set is present, it is to be used
@@ -61,7 +67,8 @@ Documentation/devicetree/bindings/pinctrl/renesas,*.
 Example:
 
 	msiof0: spi@e6e20000 {
-		compatible = "renesas,msiof-r8a7791";
+		compatible = "renesas,msiof-r8a7791",
+			     "renesas,rcar-gen2-msiof";
 		reg = <0 0xe6e20000 0 0x0064>;
 		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;

Documentation/filesystems/proc.txt

@@ -212,10 +212,11 @@ asynchronous manner and the value may not be very precise. To see a precise
 snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table.
 It's slow but very precise.
 
-Table 1-2: Contents of the status files (as of 4.1)
+Table 1-2: Contents of the status files (as of 4.8)
 ..............................................................................
  Field                       Content
  Name                        filename of the executable
+ Umask                       file mode creation mask
  State                       state (R is running, S is sleeping, D is sleeping
                              in an uninterruptible wait, Z is zombie,
 			     T is traced or stopped)
@@ -226,7 +227,6 @@ Table 1-2: Contents of the status files (as of 4.1)
  TracerPid                   PID of process tracing this process (0 if not)
  Uid                         Real, effective, saved set, and  file system UIDs
  Gid                         Real, effective, saved set, and  file system GIDs
- Umask                       file mode creation mask
  FDSize                      number of file descriptor slots currently allocated
  Groups                      supplementary group list
  NStgid                      descendant namespace thread group ID hierarchy
@@ -236,6 +236,7 @@ Table 1-2: Contents of the status files (as of 4.1)
  VmPeak                      peak virtual memory size
  VmSize                      total program size
  VmLck                       locked memory size
+ VmPin                       pinned memory size
  VmHWM                       peak resident set size ("high water mark")
  VmRSS                       size of memory portions. It contains the three
                              following parts (VmRSS = RssAnon + RssFile + RssShmem)

Documentation/power/states.txt

@@ -35,9 +35,7 @@ only one way to cause the system to go into the Suspend-To-RAM state (write
 The default suspend mode (ie. the one to be used without writing anything into
 /sys/power/mem_sleep) is either "deep" (if Suspend-To-RAM is supported) or
 "s2idle", but it can be overridden by the value of the "mem_sleep_default"
-parameter in the kernel command line.  On some ACPI-based systems, depending on
-the information in the FADT, the default may be "s2idle" even if Suspend-To-RAM
-is supported.
+parameter in the kernel command line.
 
 The properties of all of the sleep states are described below.
 

MAINTAINERS

@@ -976,6 +976,7 @@ M:	Russell King <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 W:	http://www.armlinux.org.uk/
 S:	Maintained
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git
 F:	arch/arm/
 
 ARM SUB-ARCHITECTURES
@@ -1153,6 +1154,7 @@ ARM/CLKDEV SUPPORT
 M:	Russell King <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 S:	Maintained
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git clkdev
 F:	arch/arm/include/asm/clkdev.h
 F:	drivers/clk/clkdev.c
 
@@ -1688,6 +1690,7 @@ M:	Krzysztof Kozlowski <[email protected]>
 R:	Javier Martinez Canillas <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 L:	[email protected] (moderated for non-subscribers)
+Q:	https://patchwork.kernel.org/project/linux-samsung-soc/list/
 S:	Maintained
 F:	arch/arm/boot/dts/s3c*
 F:	arch/arm/boot/dts/s5p*
@@ -3570,7 +3573,7 @@ F:	drivers/infiniband/hw/cxgb3/
 F:	include/uapi/rdma/cxgb3-abi.h
 
 CXGB4 ETHERNET DRIVER (CXGB4)
-M:	Hariprasad S <hariprasad@chelsio.com>
+M:	Ganesh Goudar <ganeshgr@chelsio.com>
 L:	[email protected]
 W:	http://www.chelsio.com
 S:	Supported
@@ -4103,12 +4106,18 @@ F:	drivers/gpu/drm/bridge/
 
 DRM DRIVER FOR BOCHS VIRTUAL GPU
 M:	Gerd Hoffmann <[email protected]>
-S:	Odd Fixes
+L:	[email protected]
+T:	git git://git.kraxel.org/linux drm-qemu
+S:	Maintained
 F:	drivers/gpu/drm/bochs/
 
 DRM DRIVER FOR QEMU'S CIRRUS DEVICE
 M:	Dave Airlie <[email protected]>
-S:	Odd Fixes
+M:	Gerd Hoffmann <[email protected]>
+L:	[email protected]
+T:	git git://git.kraxel.org/linux drm-qemu
+S:	Obsolete
+W:	https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/
 F:	drivers/gpu/drm/cirrus/
 
 RADEON and AMDGPU DRM DRIVERS
@@ -4150,7 +4159,7 @@ F:	Documentation/gpu/i915.rst
 INTEL GVT-g DRIVERS (Intel GPU Virtualization)
 M:      Zhenyu Wang <[email protected]>
 M:      Zhi Wang <[email protected]>
-L:      igvt-g-dev@lists.01.org
+L:      intel-gvt-dev@lists.freedesktop.org
 L:      [email protected]
 W:      https://01.org/igvt-g
 T:      git https://github.com/01org/gvt-linux.git
@@ -4301,7 +4310,10 @@ F:	Documentation/devicetree/bindings/display/renesas,du.txt
 
 DRM DRIVER FOR QXL VIRTUAL GPU
 M:	Dave Airlie <[email protected]>
-S:	Odd Fixes
+M:	Gerd Hoffmann <[email protected]>
+L:	[email protected]
+T:	git git://git.kraxel.org/linux drm-qemu
+S:	Maintained
 F:	drivers/gpu/drm/qxl/
 F:	include/uapi/drm/qxl_drm.h
 
@@ -7703,8 +7715,10 @@ F:	drivers/net/dsa/mv88e6xxx/
 F:	Documentation/devicetree/bindings/net/dsa/marvell.txt
 
 MARVELL ARMADA DRM SUPPORT
-M:	Russell King <rmk+kernel@armlinux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 S:	Maintained
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-armada-devel
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-armada-fixes
 F:	drivers/gpu/drm/armada/
 F:	include/uapi/drm/armada_drm.h
 F:	Documentation/devicetree/bindings/display/armada/
@@ -8909,8 +8923,10 @@ S:	Supported
 F:	drivers/nfc/nxp-nci
 
 NXP TDA998X DRM DRIVER
-M:	Russell King <rmk+kernel@armlinux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 S:	Supported
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-tda998x-devel
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-tda998x-fixes
 F:	drivers/gpu/drm/i2c/tda998x_drv.c
 F:	include/drm/i2c/tda998x.h
 
@@ -13105,6 +13121,7 @@ M:	David Airlie <[email protected]>
 M:	Gerd Hoffmann <[email protected]>
 L:	[email protected]
 L:	[email protected]
+T:	git git://git.kraxel.org/linux drm-qemu
 S:	Maintained
 F:	drivers/gpu/drm/virtio/
 F:	include/uapi/linux/virtio_gpu.h
@@ -13456,6 +13473,7 @@ F:	arch/x86/
 
 X86 PLATFORM DRIVERS
 M:	Darren Hart <[email protected]>
+M:	Andy Shevchenko <[email protected]>
 L:	[email protected]
 T:	git git://git.infradead.org/users/dvhart/linux-platform-drivers-x86.git
 S:	Maintained
@@ -13627,6 +13645,7 @@ F:	drivers/net/hamradio/z8530.h
 
 ZBUD COMPRESSED PAGE ALLOCATOR
 M:	Seth Jennings <[email protected]>
+M:	Dan Streetman <[email protected]>
 L:	[email protected]
 S:	Maintained
 F:	mm/zbud.c
@@ -13682,6 +13701,7 @@ F:	Documentation/vm/zsmalloc.txt
 
 ZSWAP COMPRESSED SWAP CACHING
 M:	Seth Jennings <[email protected]>
+M:	Dan Streetman <[email protected]>
 L:	[email protected]
 S:	Maintained
 F:	mm/zswap.c

Makefile

@@ -1,8 +1,8 @@
 VERSION = 4
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
-NAME = Roaring Lionus
+EXTRAVERSION = -rc5
+NAME = Anniversary Edition
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/arc/Kconfig

@@ -29,7 +29,7 @@ config ARC
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_MEMBLOCK
-	select HAVE_MOD_ARCH_SPECIFIC if ARC_DW2_UNWIND
+	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_OPROFILE
 	select HAVE_PERF_EVENTS
 	select HANDLE_DOMAIN_IRQ

arch/arc/include/asm/cache.h

@@ -67,7 +67,7 @@ extern unsigned long perip_base, perip_end;
 #define ARC_REG_IC_PTAG_HI	0x1F
 
 /* Bit val in IC_CTRL */
-#define IC_CTRL_CACHE_DISABLE   0x1
+#define IC_CTRL_DIS		0x1
 
 /* Data cache related Auxiliary registers */
 #define ARC_REG_DC_BCR		0x72	/* Build Config reg */
@@ -80,8 +80,9 @@ extern unsigned long perip_base, perip_end;
 #define ARC_REG_DC_PTAG_HI	0x5F
 
 /* Bit val in DC_CTRL */
-#define DC_CTRL_INV_MODE_FLUSH  0x40
-#define DC_CTRL_FLUSH_STATUS    0x100
+#define DC_CTRL_DIS		0x001
+#define DC_CTRL_INV_MODE_FLUSH	0x040
+#define DC_CTRL_FLUSH_STATUS	0x100
 
 /*System-level cache (L2 cache) related Auxiliary registers */
 #define ARC_REG_SLC_CFG		0x901
@@ -92,8 +93,8 @@ extern unsigned long perip_base, perip_end;
 #define ARC_REG_SLC_RGN_END	0x916
 
 /* Bit val in SLC_CONTROL */
+#define SLC_CTRL_DIS		0x001
 #define SLC_CTRL_IM		0x040
-#define SLC_CTRL_DISABLE	0x001
 #define SLC_CTRL_BUSY		0x100
 #define SLC_CTRL_RGN_OP_INV	0x200
 

arch/arc/include/asm/entry-arcv2.h

@@ -16,6 +16,7 @@
 	;
 	; Now manually save: r12, sp, fp, gp, r25
 
+	PUSH	r30
 	PUSH	r12
 
 	; Saving pt_regs->sp correctly requires some extra work due to the way
@@ -72,6 +73,7 @@
 	POPAX	AUX_USER_SP
 1:
 	POP	r12
+	POP	r30
 
 .endm
 

arch/arc/include/asm/module.h

@@ -14,13 +14,13 @@
 
 #include <asm-generic/module.h>
 
-#ifdef CONFIG_ARC_DW2_UNWIND
 struct mod_arch_specific {
+#ifdef CONFIG_ARC_DW2_UNWIND
 	void *unw_info;
 	int unw_sec_idx;
+#endif
 	const char *secstr;
 };
-#endif
 
 #define MODULE_PROC_FAMILY "ARC700"
 

arch/arc/include/asm/ptrace.h

@@ -84,7 +84,7 @@ struct pt_regs {
 	unsigned long fp;
 	unsigned long sp;	/* user/kernel sp depending on where we came from  */
 
-	unsigned long r12;
+	unsigned long r12, r30;
 
 	/*------- Below list auto saved by h/w -----------*/
 	unsigned long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11;

arch/arc/include/asm/setup.h

@@ -31,6 +31,7 @@ extern int root_mountflags, end_mem;
 
 void setup_processor(void);
 void __init setup_arch_memory(void);
+long __init arc_get_mem_sz(void);
 
 /* Helpers used in arc_*_mumbojumbo routines */
 #define IS_AVAIL1(v, s)		((v) ? s : "")

arch/arc/kernel/intc-arcv2.c

@@ -77,20 +77,20 @@ void arc_init_IRQ(void)
 
 static void arcv2_irq_mask(struct irq_data *data)
 {
-	write_aux_reg(AUX_IRQ_SELECT, data->irq);
+	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
 	write_aux_reg(AUX_IRQ_ENABLE, 0);
 }
 
 static void arcv2_irq_unmask(struct irq_data *data)
 {
-	write_aux_reg(AUX_IRQ_SELECT, data->irq);
+	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
 	write_aux_reg(AUX_IRQ_ENABLE, 1);
 }
 
 void arcv2_irq_enable(struct irq_data *data)
 {
 	/* set default priority */
-	write_aux_reg(AUX_IRQ_SELECT, data->irq);
+	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
 	write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
 
 	/*

arch/arc/kernel/intc-compact.c

@@ -57,7 +57,7 @@ static void arc_irq_mask(struct irq_data *data)
 	unsigned int ienb;
 
 	ienb = read_aux_reg(AUX_IENABLE);
-	ienb &= ~(1 << data->irq);
+	ienb &= ~(1 << data->hwirq);
 	write_aux_reg(AUX_IENABLE, ienb);
 }
 
@@ -66,7 +66,7 @@ static void arc_irq_unmask(struct irq_data *data)
 	unsigned int ienb;
 
 	ienb = read_aux_reg(AUX_IENABLE);
-	ienb |= (1 << data->irq);
+	ienb |= (1 << data->hwirq);
 	write_aux_reg(AUX_IENABLE, ienb);
 }
 

arch/arc/kernel/mcip.c

@@ -10,6 +10,7 @@
 
 #include <linux/smp.h>
 #include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/spinlock.h>
 #include <soc/arc/mcip.h>
 #include <asm/irqflags-arcv2.h>
@@ -221,10 +222,13 @@ static irq_hw_number_t idu_first_hwirq;
 static void idu_cascade_isr(struct irq_desc *desc)
 {
 	struct irq_domain *idu_domain = irq_desc_get_handler_data(desc);
+	struct irq_chip *core_chip = irq_desc_get_chip(desc);
 	irq_hw_number_t core_hwirq = irqd_to_hwirq(irq_desc_get_irq_data(desc));
 	irq_hw_number_t idu_hwirq = core_hwirq - idu_first_hwirq;
 
+	chained_irq_enter(core_chip, desc);
 	generic_handle_irq(irq_find_mapping(idu_domain, idu_hwirq));
+	chained_irq_exit(core_chip, desc);
 }
 
 static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq)