Merge tag 'v5.6-rc5' into asoc-5.7

Linux 5.6-rc5

COPYING

@@ -16,3 +16,5 @@ In addition, other licenses may also apply. Please see:
 	Documentation/process/license-rules.rst
 
 for more details.
+
+All contributions to the Linux Kernel are subject to this COPYING file.

CREDITS

@@ -567,6 +567,11 @@ D: Original author of Amiga FFS filesystem
 S: Orlando, Florida
 S: USA
 
+N: Paul Burton
+E: [email protected]
+W: https://pburton.com
+D: MIPS maintainer 2018-2020
+
 N: Lennert Buytenhek
 E: [email protected]
 D: Original (2.4) rewrite of the ethernet bridging code

Documentation/admin-guide/acpi/fan_performance_states.rst

@@ -18,7 +18,7 @@ may look as follows::
 
  $ ls -l /sys/bus/acpi/devices/INT3404:00/
  total 0
-...
+ ...
  -r--r--r-- 1 root root 4096 Dec 13 20:38 state0
  -r--r--r-- 1 root root 4096 Dec 13 20:38 state1
  -r--r--r-- 1 root root 4096 Dec 13 20:38 state10
@@ -38,7 +38,7 @@ where each of the "state*" files represents one performance state of the fan
 and contains a colon-separated list of 5 integer numbers (fields) with the
 following interpretation::
 
-control_percent:trip_point_index:speed_rpm:noise_level_mdb:power_mw
+  control_percent:trip_point_index:speed_rpm:noise_level_mdb:power_mw
 
 * ``control_percent``: The percent value to be used to set the fan speed to a
   specific level using the _FSL object (0-100).

Documentation/admin-guide/bootconfig.rst

@@ -62,6 +62,30 @@ Or more shorter, written as following::
 In both styles, same key words are automatically merged when parsing it
 at boot time. So you can append similar trees or key-values.
 
+Same-key Values
+---------------
+
+It is prohibited that two or more values or arrays share a same-key.
+For example,::
+
+ foo = bar, baz
+ foo = qux  # !ERROR! we can not re-define same key
+
+If you want to append the value to existing key as an array member,
+you can use ``+=`` operator. For example::
+
+ foo = bar, baz
+ foo += qux
+
+In this case, the key ``foo`` has ``bar``, ``baz`` and ``qux``.
+
+However, a sub-key and a value can not co-exist under a parent key.
+For example, following config is NOT allowed.::
+
+ foo = value1
+ foo.bar = value2 # !ERROR! subkey "bar" and value "value1" can NOT co-exist
+
+
 Comments
 --------
 
@@ -102,9 +126,13 @@ Boot Kernel With a Boot Config
 ==============================
 
 Since the boot configuration file is loaded with initrd, it will be added
-to the end of the initrd (initramfs) image file. The Linux kernel decodes
-the last part of the initrd image in memory to get the boot configuration
-data.
+to the end of the initrd (initramfs) image file with size, checksum and
+12-byte magic word as below.
+
+[initrd][bootconfig][size(u32)][checksum(u32)][#BOOTCONFIG\n]
+
+The Linux kernel decodes the last part of the initrd image in memory to
+get the boot configuration data.
 Because of this "piggyback" method, there is no need to change or
 update the boot loader and the kernel image itself.
 

Documentation/admin-guide/kernel-parameters.txt

@@ -136,6 +136,10 @@
 			dynamic table installation which will install SSDT
 			tables to /sys/firmware/acpi/tables/dynamic.
 
+	acpi_no_watchdog	[HW,ACPI,WDT]
+			Ignore the ACPI-based watchdog interface (WDAT) and let
+			a native driver control the watchdog device instead.
+
 	acpi_rsdp=	[ACPI,EFI,KEXEC]
 			Pass the RSDP address to the kernel, mostly used
 			on machines running EFI runtime service to boot the

Documentation/arm64/memory.rst

@@ -129,7 +129,7 @@ this logic.
 
 As a single binary will need to support both 48-bit and 52-bit VA
 spaces, the VMEMMAP must be sized large enough for 52-bit VAs and
-also must be sized large enought to accommodate a fixed PAGE_OFFSET.
+also must be sized large enough to accommodate a fixed PAGE_OFFSET.
 
 Most code in the kernel should not need to consider the VA_BITS, for
 code that does need to know the VA size the variables are

Documentation/arm64/tagged-address-abi.rst

@@ -44,8 +44,15 @@ The AArch64 Tagged Address ABI has two stages of relaxation depending
 how the user addresses are used by the kernel:
 
 1. User addresses not accessed by the kernel but used for address space
-   management (e.g. ``mmap()``, ``mprotect()``, ``madvise()``). The use
-   of valid tagged pointers in this context is always allowed.
+   management (e.g. ``mprotect()``, ``madvise()``). The use of valid
+   tagged pointers in this context is allowed with the exception of
+   ``brk()``, ``mmap()`` and the ``new_address`` argument to
+   ``mremap()`` as these have the potential to alias with existing
+   user addresses.
+
+   NOTE: This behaviour changed in v5.6 and so some earlier kernels may
+   incorrectly accept valid tagged pointers for the ``brk()``,
+   ``mmap()`` and ``mremap()`` system calls.
 
 2. User addresses accessed by the kernel (e.g. ``write()``). This ABI
    relaxation is disabled by default and the application thread needs to

Documentation/dev-tools/kunit/usage.rst

@@ -551,6 +551,7 @@ options to your ``.config``:
 Once the kernel is built and installed, a simple
 
 .. code-block:: bash
+
 	modprobe example-test
 
 ...will run the tests.

Documentation/devicetree/bindings/arm/arm,scmi.txt

@@ -102,7 +102,7 @@ Required sub-node properties:
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/power/power-domain.yaml
 [3] Documentation/devicetree/bindings/thermal/thermal.txt
-[4] Documentation/devicetree/bindings/sram/sram.txt
+[4] Documentation/devicetree/bindings/sram/sram.yaml
 [5] Documentation/devicetree/bindings/reset/reset.txt
 
 Example:

Documentation/devicetree/bindings/arm/arm,scpi.txt

@@ -109,7 +109,7 @@ Required properties:
 [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/thermal/thermal.txt
-[3] Documentation/devicetree/bindings/sram/sram.txt
+[3] Documentation/devicetree/bindings/sram/sram.yaml
 [4] Documentation/devicetree/bindings/power/power-domain.yaml
 
 Example:

Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt

@@ -62,7 +62,7 @@ Timer node:
 
 Syscon reboot node:
 
-See Documentation/devicetree/bindings/power/reset/syscon-reboot.txt for the
+See Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml for the
 detailed list of properties, the two values defined below are specific to the
 BCM6328-style timer:
 

Documentation/devicetree/bindings/arm/cpus.yaml

@@ -216,7 +216,7 @@ properties:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
     description: |
       List of phandles to idle state nodes supported
-      by this cpu (see ./idle-states.txt).
+      by this cpu (see ./idle-states.yaml).
 
   capacity-dmips-mhz:
     $ref: '/schemas/types.yaml#/definitions/uint32'

Documentation/devicetree/bindings/arm/fsl.yaml

@@ -160,7 +160,7 @@ properties:
         items:
           - enum:
               - armadeus,imx6dl-apf6      # APF6 (Solo) SoM
-              - armadeus,imx6dl-apf6dldev # APF6 (Solo) SoM on APF6Dev board
+              - armadeus,imx6dl-apf6dev   # APF6 (Solo) SoM on APF6Dev board
               - eckelmann,imx6dl-ci4x10
               - emtrion,emcon-mx6         # emCON-MX6S or emCON-MX6DL SoM
               - emtrion,emcon-mx6-avari   # emCON-MX6S or emCON-MX6DL SoM on Avari Base

Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt

@@ -1,7 +1,7 @@
 * Hisilicon Hi3519 System Controller Block
 
 This bindings use the following binding:
-Documentation/devicetree/bindings/mfd/syscon.txt
+Documentation/devicetree/bindings/mfd/syscon.yaml
 
 Required properties:
 - compatible: "hisilicon,hi3519-sysctrl".

Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt

@@ -81,4 +81,4 @@ Example:
 		};
 	};
 
-[1]. Documentation/devicetree/bindings/arm/idle-states.txt
+[1]. Documentation/devicetree/bindings/arm/idle-states.yaml

Documentation/devicetree/bindings/arm/omap/mpu.txt

@@ -17,7 +17,7 @@ am335x and am437x only:
 - pm-sram: Phandles to ocmcram nodes to be used for power management.
 	   First should be type 'protect-exec' for the driver to use to copy
 	   and run PM functions, second should be regular pool to be used for
-	   data region for code. See Documentation/devicetree/bindings/sram/sram.txt
+	   data region for code. See Documentation/devicetree/bindings/sram/sram.yaml
 	   for more details.
 
 Examples:

Documentation/devicetree/bindings/arm/psci.yaml

@@ -100,13 +100,14 @@ properties:
       bindings in [1]) must specify this property.
 
       [1] Kernel documentation - ARM idle states bindings
-        Documentation/devicetree/bindings/arm/idle-states.txt
-
-  "#power-domain-cells":
-    description:
-      The number of cells in a PM domain specifier as per binding in [3].
-      Must be 0 as to represent a single PM domain.
+        Documentation/devicetree/bindings/arm/idle-states.yaml
 
+patternProperties:
+  "^power-domain-":
+    allOf:
+      - $ref: "../power/power-domain.yaml#"
+    type: object
+    description: |
       ARM systems can have multiple cores, sometimes in an hierarchical
       arrangement. This often, but not always, maps directly to the processor
       power topology of the system. Individual nodes in a topology have their
@@ -122,14 +123,8 @@ properties:
       helps to implement support for OSI mode and OS implementations may choose
       to mandate it.
 
-      [3] Documentation/devicetree/bindings/power/power_domain.txt
-      [4] Documentation/devicetree/bindings/power/domain-idle-state.txt
-
-  power-domains:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    description:
-      List of phandles and PM domain specifiers, as defined by bindings of the
-      PM domain provider.
+      [3] Documentation/devicetree/bindings/power/power-domain.yaml
+      [4] Documentation/devicetree/bindings/power/domain-idle-state.yaml
 
 required:
   - compatible
@@ -199,7 +194,7 @@ examples:
 
       CPU0: cpu@0 {
         device_type = "cpu";
-        compatible = "arm,cortex-a53", "arm,armv8";
+        compatible = "arm,cortex-a53";
         reg = <0x0>;
         enable-method = "psci";
         power-domains = <&CPU_PD0>;
@@ -208,7 +203,7 @@ examples:
 
       CPU1: cpu@1 {
         device_type = "cpu";
-        compatible = "arm,cortex-a57", "arm,armv8";
+        compatible = "arm,cortex-a53";
         reg = <0x100>;
         enable-method = "psci";
         power-domains = <&CPU_PD1>;
@@ -224,6 +219,9 @@ examples:
           exit-latency-us = <10>;
           min-residency-us = <100>;
         };
+      };
+
+      domain-idle-states {
 
         CLUSTER_RET: cluster-retention {
           compatible = "domain-idle-state";
@@ -247,19 +245,19 @@ examples:
       compatible = "arm,psci-1.0";
       method = "smc";
 
-      CPU_PD0: cpu-pd0 {
+      CPU_PD0: power-domain-cpu0 {
         #power-domain-cells = <0>;
         domain-idle-states = <&CPU_PWRDN>;
         power-domains = <&CLUSTER_PD>;
       };
 
-      CPU_PD1: cpu-pd1 {
+      CPU_PD1: power-domain-cpu1 {
         #power-domain-cells = <0>;
         domain-idle-states =  <&CPU_PWRDN>;
         power-domains = <&CLUSTER_PD>;
       };
 
-      CLUSTER_PD: cluster-pd {
+      CLUSTER_PD: power-domain-cluster {
         #power-domain-cells = <0>;
         domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
       };

Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml

@@ -52,7 +52,7 @@ required:
 
 examples:
   - |
-    mlahb: ahb {
+    mlahb: ahb@38000000 {
       compatible = "st,mlahb", "simple-bus";
       #address-cells = <1>;
       #size-cells = <1>;

Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml

@@ -70,7 +70,6 @@ examples:
         #size-cells = <0>;
 
         pmic@3e3 {
-            compatible = "...";
             reg = <0x3e3>;
 
             /* ... */

Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml

@@ -40,7 +40,7 @@ additionalProperties: false
 
 examples:
   - |
-    osc24M: clk@01c20050 {
+    osc24M: clk@1c20050 {
         #clock-cells = <0>;
         compatible = "allwinner,sun4i-a10-osc-clk";
         reg = <0x01c20050 0x4>;

Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml

@@ -41,7 +41,7 @@ additionalProperties: false
 
 examples:
   - |
-    clk@0600005c {
+    clk@600005c {
         #clock-cells = <0>;
         compatible = "allwinner,sun9i-a80-gt-clk";
         reg = <0x0600005c 0x4>;

Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml

@@ -42,7 +42,7 @@ properties:
       be part of GCC and hence the TSENS properties can also be part
       of the GCC/clock-controller node.
       For more details on the TSENS properties please refer
-      Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+      Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
 
   nvmem-cell-names:
     minItems: 1

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml

@@ -43,9 +43,13 @@ properties:
         - enum:
           - allwinner,sun8i-h3-tcon-tv
           - allwinner,sun50i-a64-tcon-tv
-          - allwinner,sun50i-h6-tcon-tv
         - const: allwinner,sun8i-a83t-tcon-tv
 
+      - items:
+        - enum:
+          - allwinner,sun50i-h6-tcon-tv
+        - const: allwinner,sun8i-r40-tcon-tv
+
   reg:
     maxItems: 1
 

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml

@@ -49,11 +49,7 @@ examples:
         resets = <&tcon_ch0_clk 0>;
 
         port {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            tve0_in_tcon0: endpoint@0 {
-                reg = <0>;
+            tve0_in_tcon0: endpoint {
                 remote-endpoint = <&tcon0_out_tve0>;
             };
         };

Documentation/devicetree/bindings/display/bridge/anx6345.yaml

@@ -79,21 +79,15 @@ examples:
           #size-cells = <0>;
 
           anx6345_in: port@0 {
-            #address-cells = <1>;
-            #size-cells = <0>;
             reg = <0>;
-            anx6345_in_tcon0: endpoint@0 {
-              reg = <0>;
+            anx6345_in_tcon0: endpoint {
               remote-endpoint = <&tcon0_out_anx6345>;
             };
           };
 
           anx6345_out: port@1 {
-            #address-cells = <1>;
-            #size-cells = <0>;
             reg = <1>;
-            anx6345_out_panel: endpoint@0 {
-              reg = <0>;
+            anx6345_out_panel: endpoint {
               remote-endpoint = <&panel_in_edp>;
             };
           };

Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml

@@ -37,6 +37,8 @@ examples:
     dsi@ff450000 {
         #address-cells = <1>;
         #size-cells = <0>;
+        reg = <0xff450000 0x1000>;
+
         panel@0 {
             compatible = "leadtek,ltk500hd1829";
             reg = <0>;