Merge tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/…

…kernel/git/arm/arm-soc Pull ARM SoC non-critical fixes from Olof Johansson: "Here is a collection of fixes (and some intermixed cleanups) that were considered less important and thus not included in the later parts of the 3.9-rc cycle. It's a bit all over the map, contents wise. A series of ux500 fixes and cleanups, a bunch of various fixes for OMAP and tegra, and some for Freescale i.MX and even Qualcomm MSM. Note that there's also a patch on this branch to globally turn off -Wmaybe-uninitialized when building with -Os. It's been posted several times by Arnd and no dissent was raised, but nobody seemed interested to pick it up. So here it is, as the topmost patch." * tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits) Turn off -Wmaybe-uninitialized when building with -Os ARM: orion5x: include linux/cpu.h ARM: tegra: call cpu_do_idle from C code ARM: u300: fix ages old copy/paste bug ARM: OMAP2+: add dependencies on ARCH_MULTI_V6/V7 ARM: tegra: solve adr range issue with THUMB2_KERNEL enabled ARM: tegra: fix relocation truncated error when THUMB2_KERNEL enabled ARM: tegra: fix build error when THUMB2_KERNEL enabled ARM: msm: Fix uncompess.h tx underrun check ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS" ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD" ARM: mach-imx: mach-imx6q: Fix sparse warnings ARM: mach-imx: src: Include "common.h ARM: mach-imx: gpc: Include "common.h" ARM: mach-imx: avic: Staticize *avic_base ARM: mach-imx: tzic: Staticize *tzic_base ARM: mach-imx: clk: Include "clk.h" ARM: mach-imx: clk-busy: Staticize clk_busy_mux_ops ...
mrcsosa · May 2, 2013 · 4d26aa3 · 4d26aa3
2 parents 600fe97 + e74fc97
commit 4d26aa3
Show file tree

Hide file tree

Showing 79 changed files with 321 additions and 279 deletions.
diff --git a/Makefile b/Makefile
@@ -571,7 +571,7 @@ endif # $(dot-config)
 all: vmlinux
 
 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
-KBUILD_CFLAGS	+= -Os
+KBUILD_CFLAGS	+= -Os $(call cc-disable-warning,maybe-uninitialized,)
 else
 KBUILD_CFLAGS	+= -O2
 endif

diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -191,7 +191,7 @@
 
 		prcmu: prcmu@80157000 {
 			compatible = "stericsson,db8500-prcmu";
-			reg = <0x80157000 0x1000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
+			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
 			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
 			interrupts = <0 47 0x4>;
 			#address-cells = <1>;
@@ -674,10 +674,13 @@
 			compatible = "regulator-gpio";
 
 			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2600000>;
+			regulator-max-microvolt = <2900000>;
 			regulator-name = "mmci-reg";
 			regulator-type = "voltage";
 
+			startup-delay-us = <100>;
+			enable-active-high;
+
 			states = <1800000 0x1
 				  2900000 0x0>;
 

diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi
@@ -87,6 +87,7 @@
 			mmc-cap-sd-highspeed;
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			vqmmc-supply = <&vmmci>;
 
 			cd-gpios  = <&tc3589x_gpio 3 0x4>;
 

diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts
@@ -25,6 +25,14 @@
 	};
 
 	soc-u9500 {
+		prcmu@80157000 {
+			ab8500@5 {
+				ab8500-gpio {
+					compatible = "stericsson,ab8500-gpio";
+				};
+			};
+		};
+
 		i2c@80004000 {
 			tps61052@33 {
 				compatible = "tps61052";
@@ -40,7 +48,7 @@
 
 		vmmci: regulator-gpio {
 			gpios = <&tc3589x_gpio 18 0x4>;
-			gpio-enable = <&tc3589x_gpio 17 0x4>;
+			enable-gpio = <&tc3589x_gpio 17 0x4>;
 
 			status = "okay";
 		};

diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
@@ -299,6 +299,10 @@
 			};
 
 			ab8500 {
+				ab8500-gpio {
+					compatible = "stericsson,ab8500-gpio";
+				};
+
 				ab8500-regulators {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";

diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi
@@ -15,7 +15,7 @@
 			stmpe1601: stmpe1601@40 {
 				compatible = "st,stmpe1601";
 				reg = <0x40>;
-				interrupts = <26 0x1>;
+				interrupts = <26 0x2>;
 				interrupt-parent = <&gpio6>;
 				interrupt-controller;
 

diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
@@ -444,7 +444,7 @@
 	};
 
 	sdhci@c8000600 {
-		cd-gpios = <&gpio 23 0>; /* gpio PC7 */
+		cd-gpios = <&gpio 23 1>; /* gpio PC7 */
 	};
 
 	sound {

diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -437,15 +437,15 @@
 
 	sdhci@c8000200 {
 		status = "okay";
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
 		power-gpios = <&gpio 155 0>; /* gpio PT3 */
 		bus-width = <4>;
 	};
 
 	sdhci@c8000600 {
 		status = "okay";
-		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+		cd-gpios = <&gpio 58 1>; /* gpio PH2 */
 		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
 		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 		bus-width = <8>;

diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -436,7 +436,7 @@
 
 	sdhci@c8000000 {
 		status = "okay";
-		cd-gpios = <&gpio 173 0>; /* gpio PV5 */
+		cd-gpios = <&gpio 173 1>; /* gpio PV5 */
 		wp-gpios = <&gpio 57 0>;  /* gpio PH1 */
 		power-gpios = <&gpio 169 0>; /* gpio PV1 */
 		bus-width = <4>;

diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -584,7 +584,7 @@
 
 	sdhci@c8000400 {
 		status = "okay";
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
 		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 		bus-width = <4>;

diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -465,7 +465,7 @@
 	};
 
 	sdhci@c8000600 {
-		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+		cd-gpios = <&gpio 58 1>; /* gpio PH2 */
 		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
 		bus-width = <4>;
 		status = "okay";

diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -325,7 +325,7 @@
 
 	sdhci@c8000600 {
 		status = "okay";
-		cd-gpios = <&gpio 121 0>; /* gpio PP1 */
+		cd-gpios = <&gpio 121 1>; /* gpio PP1 */
 		wp-gpios = <&gpio 122 0>; /* gpio PP2 */
 		bus-width = <4>;
 	};

diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -520,7 +520,7 @@
 
 	sdhci@c8000400 {
 		status = "okay";
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
 		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 		bus-width = <4>;

diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -510,6 +510,7 @@
 
 	sdhci@c8000400 {
 		status = "okay";
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
 		wp-gpios = <&gpio 173 0>; /* gpio PV5 */
 		bus-width = <8>;
 	};

diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -257,7 +257,7 @@
 
 	sdhci@78000000 {
 		status = "okay";
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
 		wp-gpios = <&gpio 155 0>; /* gpio PT3 */
 		power-gpios = <&gpio 31 0>; /* gpio PD7 */
 		bus-width = <4>;

diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -311,7 +311,7 @@
 
 	sdhci@78000000 {
 		status = "okay";
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
 		wp-gpios = <&gpio 155 0>; /* gpio PT3 */
 		power-gpios = <&gpio 31 0>; /* gpio PD7 */
 		bus-width = <4>;

diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -117,7 +117,7 @@
 	};
 
 	pmu {
-		compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
+		compatible = "arm,cortex-a15-pmu";
 		interrupts = <0 68 4>,
 			     <0 69 4>;
 	};

diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -134,7 +134,7 @@
 	};
 
 	pmu {
-		compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
+		compatible = "arm,cortex-a15-pmu";
 		interrupts = <0 68 4>,
 			     <0 69 4>;
 	};

diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -111,7 +111,7 @@
 	};
 
 	pmu {
-		compatible = "arm,cortex-a5-pmu", "arm,cortex-a9-pmu";
+		compatible = "arm,cortex-a5-pmu";
 		interrupts = <0 68 4>,
 			     <0 69 4>;
 	};

diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
@@ -31,16 +31,6 @@ static struct map_desc cns3xxx_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(CNS3XXX_TIMER1_2_3_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_GPIOA_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_GPIOA_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_GPIOB_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_GPIOB_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
 	}, {
 		.virtual	= CNS3XXX_MISC_BASE_VIRT,
 		.pfn		= __phys_to_pfn(CNS3XXX_MISC_BASE),

diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
@@ -20,22 +20,16 @@
 #define CNS3XXX_SPI_FLASH_BASE			0x60000000	/* SPI Serial Flash Memory */
 
 #define CNS3XXX_SWITCH_BASE			0x70000000	/* Switch and HNAT Control */
-#define CNS3XXX_SWITCH_BASE_VIRT		0xFFF00000
 
 #define CNS3XXX_PPE_BASE			0x70001000	/* HANT	*/
-#define CNS3XXX_PPE_BASE_VIRT			0xFFF50000
 
 #define CNS3XXX_EMBEDDED_SRAM_BASE		0x70002000	/* HANT Embedded SRAM */
-#define CNS3XXX_EMBEDDED_SRAM_BASE_VIRT		0xFFF60000
 
 #define CNS3XXX_SSP_BASE			0x71000000	/* Synchronous Serial Port - SPI/PCM/I2C */
-#define CNS3XXX_SSP_BASE_VIRT			0xFFF01000
 
 #define CNS3XXX_DMC_BASE			0x72000000	/* DMC Control (DDR2 SDRAM) */
-#define CNS3XXX_DMC_BASE_VIRT			0xFFF02000
 
 #define CNS3XXX_SMC_BASE			0x73000000	/* SMC Control */
-#define CNS3XXX_SMC_BASE_VIRT			0xFFF03000
 
 #define SMC_MEMC_STATUS_OFFSET			0x000
 #define SMC_MEMIF_CFG_OFFSET			0x004
@@ -74,13 +68,10 @@
 #define SMC_PCELL_ID_3_OFFSET			0xFFC
 
 #define CNS3XXX_GPIOA_BASE			0x74000000	/* GPIO port A */
-#define CNS3XXX_GPIOA_BASE_VIRT			0xFFF04000
 
 #define CNS3XXX_GPIOB_BASE			0x74800000	/* GPIO port B */
-#define CNS3XXX_GPIOB_BASE_VIRT			0xFFF05000
 
 #define CNS3XXX_RTC_BASE			0x75000000	/* Real Time Clock */
-#define CNS3XXX_RTC_BASE_VIRT			0xFFF06000
 
 #define RTC_SEC_OFFSET				0x00
 #define RTC_MIN_OFFSET				0x04
@@ -112,22 +103,16 @@
 #define CNS3XXX_UART0_BASE_VIRT			0xFB002000
 
 #define CNS3XXX_UART1_BASE			0x78400000	/* UART 1 */
-#define CNS3XXX_UART1_BASE_VIRT			0xFFF0A000
 
 #define CNS3XXX_UART2_BASE			0x78800000	/* UART 2 */
-#define CNS3XXX_UART2_BASE_VIRT			0xFFF0B000
 
 #define CNS3XXX_DMAC_BASE			0x79000000	/* Generic DMA Control */
-#define CNS3XXX_DMAC_BASE_VIRT			0xFFF0D000
 
 #define CNS3XXX_CORESIGHT_BASE			0x7A000000	/* CoreSight */
-#define CNS3XXX_CORESIGHT_BASE_VIRT		0xFFF0E000
 
 #define CNS3XXX_CRYPTO_BASE			0x7B000000	/* Crypto */
-#define CNS3XXX_CRYPTO_BASE_VIRT		0xFFF0F000
 
 #define CNS3XXX_I2S_BASE			0x7C000000	/* I2S */
-#define CNS3XXX_I2S_BASE_VIRT			0xFFF10000
 
 #define CNS3XXX_TIMER1_2_3_BASE			0x7C800000	/* Timer */
 #define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFB003000
@@ -150,42 +135,31 @@
 #define TIMER_FREERUN_CONTROL_OFFSET		0x44
 
 #define CNS3XXX_HCIE_BASE			0x7D000000	/* HCIE Control */
-#define CNS3XXX_HCIE_BASE_VIRT			0xFFF30000
 
 #define CNS3XXX_RAID_BASE			0x7E000000	/* RAID Control */
-#define CNS3XXX_RAID_BASE_VIRT			0xFFF12000
 
 #define CNS3XXX_AXI_IXC_BASE			0x7F000000	/* AXI IXC */
-#define CNS3XXX_AXI_IXC_BASE_VIRT		0xFFF13000
 
 #define CNS3XXX_CLCD_BASE			0x80000000	/* LCD Control */
-#define CNS3XXX_CLCD_BASE_VIRT			0xFFF14000
 
 #define CNS3XXX_USBOTG_BASE			0x81000000	/* USB OTG Control */
-#define CNS3XXX_USBOTG_BASE_VIRT		0xFFF15000
 
 #define CNS3XXX_USB_BASE			0x82000000	/* USB Host Control */
 
 #define CNS3XXX_SATA2_BASE			0x83000000	/* SATA */
 #define CNS3XXX_SATA2_SIZE			SZ_16M
-#define CNS3XXX_SATA2_BASE_VIRT			0xFFF17000
 
 #define CNS3XXX_CAMERA_BASE			0x84000000	/* Camera Interface */
-#define CNS3XXX_CAMERA_BASE_VIRT		0xFFF18000
 
 #define CNS3XXX_SDIO_BASE			0x85000000	/* SDIO */
-#define CNS3XXX_SDIO_BASE_VIRT			0xFFF19000
 
 #define CNS3XXX_I2S_TDM_BASE			0x86000000	/* I2S TDM */
-#define CNS3XXX_I2S_TDM_BASE_VIRT		0xFFF1A000
 
 #define CNS3XXX_2DG_BASE			0x87000000	/* 2D Graphic Control */
-#define CNS3XXX_2DG_BASE_VIRT			0xFFF1B000
 
 #define CNS3XXX_USB_OHCI_BASE			0x88000000	/* USB OHCI */
 
 #define CNS3XXX_L2C_BASE			0x92000000	/* L2 Cache Control */
-#define CNS3XXX_L2C_BASE_VIRT			0xFFF27000
 
 #define CNS3XXX_PCIE0_MEM_BASE			0xA0000000	/* PCIe Port 0 IO/Memory Space */
 #define CNS3XXX_PCIE0_MEM_BASE_VIRT		0xE0000000
@@ -239,7 +213,6 @@
 #define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
 
 #define CNS3XXX_TC11MP_L220_BASE		0x92002000	/* L220 registers */
-#define CNS3XXX_TC11MP_L220_BASE_VIRT		0xFF002000
 
 /*
  * Misc block

diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c
@@ -51,7 +51,7 @@
 
 #define AVIC_NUM_IRQS 64
 
-void __iomem *avic_base;
+static void __iomem *avic_base;
 static struct irq_domain *domain;
 
 static u32 avic_saved_mask_reg[2];

diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c
@@ -147,7 +147,7 @@ static int clk_busy_mux_set_parent(struct clk_hw *hw, u8 index)
 	return ret;
 }
 
-struct clk_ops clk_busy_mux_ops = {
+static struct clk_ops clk_busy_mux_ops = {
 	.get_parent = clk_busy_mux_get_parent,
 	.set_parent = clk_busy_mux_set_parent,
 };

diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c
@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/string.h>
+#include "clk.h"
 
 /**
  * DOC: basic gatable clock which can gate and ungate it's ouput

diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c
@@ -78,7 +78,7 @@ static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw,
 	return ll;
 }
 
-struct clk_ops clk_pllv1_ops = {
+static struct clk_ops clk_pllv1_ops = {
 	.recalc_rate = clk_pllv1_recalc_rate,
 };
 

diff --git a/arch/arm/mach-imx/clk-pllv2.c b/arch/arm/mach-imx/clk-pllv2.c
@@ -229,7 +229,7 @@ static void clk_pllv2_unprepare(struct clk_hw *hw)
 	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
 }
 
-struct clk_ops clk_pllv2_ops = {
+static struct clk_ops clk_pllv2_ops = {
 	.prepare = clk_pllv2_prepare,
 	.unprepare = clk_pllv2_unprepare,
 	.recalc_rate = clk_pllv2_recalc_rate,

diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c
@@ -1,3 +1,4 @@
 #include <linux/spinlock.h>
+#include "clk.h"
 
 DEFINE_SPINLOCK(imx_ccm_lock);
diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c
@@ -18,6 +18,7 @@
 #include <linux/io.h>
 
 #include "hardware.h"
+#include "common.h"
 
 static int mx5_cpu_rev = -1;