e100: Fix Tyan motherboard e100 not receiving IPMI commands

The 82550 & 51 parts have an extended configuration block that includes a bit "GMRC", required to enable the expected TCO behavior, in config byte offset 22d. The config block sent by the failing driver does include the extension area, but this bit is not initialised, and the downlaod only specifies 0x16 bytes to be sent to the NIC (thaht's bytes 00..21d). By initializing the GMRC bit, and extending the download size for D102+ MACs, the problem is resolved. Signed-off-by: David Graham <[email protected]> Signed-off-by: Auke Kok <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
mrcsosa · Jul 10, 2007 · 44e4925 · 44e4925
1 parent c6f5047
commit 44e4925
Showing 1 changed file with 9 additions and 3 deletions.
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
@@ -159,7 +159,7 @@
 
 #define DRV_NAME		"e100"
 #define DRV_EXT			"-NAPI"
-#define DRV_VERSION		"3.5.17-k4"DRV_EXT
+#define DRV_VERSION		"3.5.23-k4"DRV_EXT
 #define DRV_DESCRIPTION		"Intel(R) PRO/100 Network Driver"
 #define DRV_COPYRIGHT		"Copyright(c) 1999-2006 Intel Corporation"
 #define PFX			DRV_NAME ": "
@@ -1024,10 +1024,16 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 		config->mwi_enable = 0x1;	/* 1=enable, 0=disable */
 		config->standard_tcb = 0x0;	/* 1=standard, 0=extended */
 		config->rx_long_ok = 0x1;	/* 1=VLANs ok, 0=standard */
-		if(nic->mac >= mac_82559_D101M)
+		if (nic->mac >= mac_82559_D101M) {
 			config->tno_intr = 0x1;		/* TCO stats enable */
-		else
+			/* Enable TCO in extended config */
+			if (nic->mac >= mac_82551_10) {
+				config->byte_count = 0x20; /* extended bytes */
+				config->rx_d102_mode = 0x1; /* GMRC for TCO */
+			}
+		} else {
 			config->standard_stat_counter = 0x0;
+		}
 	}
 
 	DPRINTK(HW, DEBUG, "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",