devicetree: fix name of pinctrl-bindings.txt

Rename: pinctrl-binding.txt -> pinctrl-bindings.txt In order to match the current name of this file. Signed-off-by: Mauro Carvalho Chehab <[email protected]> Acked-by: Jonathan Corbet <[email protected]>
mrcsosa · Jun 15, 2018 · 18ba1f9 · 18ba1f9
1 parent 6c79521
commit 18ba1f9
Show file tree

Hide file tree

Showing 9 changed files with 12 additions and 12 deletions.
diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
@@ -28,7 +28,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
 - pinctrl-names	: a pinctrl state named tsin%d-serial or tsin%d-parallel (where %d is tsin-num)
 		   must be defined for each tsin child node.
 - pinctrl-0	: phandle referencing pin configuration for this tsin configuration
-See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 
 
 Required properties (tsin (child) node):

diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt
@@ -46,7 +46,7 @@ is required:
 	Following properties are require if pin control setting is required
 	at boot.
 	- pinctrl-names: A pinctrl state named "default" be defined, using the
-		bindings in pinctrl/pinctrl-binding.txt.
+		bindings in pinctrl/pinctrl-bindings.txt.
 	- pinctrl[0...n]: Properties to contain the phandle that refer to
 		different nodes of pin control settings. These nodes represents
 		the pin control setting of state 0 to state n. Each of these

diff --git a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
@@ -12,7 +12,7 @@ Required properties:
           See: Documentation/devicetree/bindings/clock/clock-bindings.txt
 - pinctrl-names: A pinctrl state names "default" must be defined.
 - pinctrl-0: Phandle referencing pin configuration of the SDHCI controller.
-             See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+             See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 
 Example:
 

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
@@ -20,7 +20,7 @@ Required properties:
 
 - pinctrl-names:	A pinctrl state names "default" must be defined.
 - pinctrl-0:		Phandle referencing pin configuration of the sd/emmc controller.
-			See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+			See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 
 - reg:			This must provide the host controller base address and it can also
 			contain the FlashSS Top register for TX/RX delay used by the driver

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt
@@ -11,9 +11,9 @@ Optional Pinmux properties:
 --------------------------
 Following properties are required if default setting of pins are required
 at boot.
-- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>.
+- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
 - pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
-		<pinctrl-binding.txt>.
+		<pinctrl-bindings.txt>.
 
 The pin configurations are defined as child of the pinctrl states node. Each
 sub-node have following properties:

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
@@ -101,9 +101,9 @@ Optional Pinmux properties:
 --------------------------
 Following properties are required if default setting of pins are required
 at boot.
-- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>.
+- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
 - pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
-		<pinctrl-binding.txt>.
+		<pinctrl-bindings.txt>.
 
 The pin configurations are defined as child of the pinctrl states node. Each
 sub-node have following properties:

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
@@ -10,9 +10,9 @@ Optional Pinmux properties:
 --------------------------
 Following properties are required if default setting of pins are required
 at boot.
-- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>.
+- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
 - pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
-		<pinctrl-binding.txt>.
+		<pinctrl-bindings.txt>.
 
 The pin configurations are defined as child of the pinctrl states node. Each
 sub-node have following properties:

diff --git a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
@@ -8,7 +8,7 @@ Required properties:
           See: Documentation/devicetree/bindings/clock/clock-bindings.txt
 - pinctrl-names: A pinctrl state names "default" must be defined.
 - pinctrl-0: Phandle referencing pin configuration of the UART peripheral.
-             See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+             See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 
 Optional properties:
 - cts-gpios: CTS pin for UART

diff --git a/Documentation/devicetree/bindings/spi/spi-st-ssc.txt b/Documentation/devicetree/bindings/spi/spi-st-ssc.txt
@@ -9,7 +9,7 @@ Required properties:
 - clocks	: Must contain an entry for each name in clock-names
 		    See ../clk/*
 - pinctrl-names	: Uses "default", can use "sleep" if provided
-		    See ../pinctrl/pinctrl-binding.txt
+		    See ../pinctrl/pinctrl-bindings.txt
 
 Optional properties:
 - cs-gpios	: List of GPIO chip selects