ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter

The ixgbe_ptp_start_cyclecounter is intended to be called whenever the
cyclecounter parameters need to be changed.

Since commit a9763f3 ("ixgbe: Update PTP to support X550EM_x
devices"), this function has cleared the SYSTIME registers and reset the
TSAUXC DISABLE_SYSTIME bit.

While these need to be cleared during ixgbe_ptp_reset, it is wrong to clear
them during ixgbe_ptp_start_cyclecounter. This function may be called
during both reset and link status change. When link changes, the SYSTIME
counter is still operating normally, but the cyclecounter should be updated
to account for the possibly changed parameters.

Clearing SYSTIME when link changes causes the timecounter to jump because
the cycle counter now reads zero.

Extract the SYSTIME initialization out to a new function and call this
during ixgbe_ptp_reset. This prevents the timecounter adjustment and avoids
an unnecessary reset of the current time.

This also restores the original SYSTIME clearing that occurred during
ixgbe_ptp_reset before the commit above.

Reported-by: Steve Payne <[email protected]>
Reported-by: Ilya Evenbach <[email protected]>
Fixes: a9763f3 ("ixgbe: Update PTP to support X550EM_x devices")
Signed-off-by: Jacob Keller <[email protected]>
Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>

drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c

@@ -1214,7 +1214,6 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
 	struct cyclecounter cc;
 	unsigned long flags;
 	u32 incval = 0;
-	u32 tsauxc = 0;
 	u32 fuse0 = 0;
 
 	/* For some of the boards below this mask is technically incorrect.
@@ -1249,18 +1248,6 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
 	case ixgbe_mac_x550em_a:
 	case ixgbe_mac_X550:
 		cc.read = ixgbe_ptp_read_X550;
-
-		/* enable SYSTIME counter */
-		IXGBE_WRITE_REG(hw, IXGBE_SYSTIMR, 0);
-		IXGBE_WRITE_REG(hw, IXGBE_SYSTIML, 0);
-		IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0);
-		tsauxc = IXGBE_READ_REG(hw, IXGBE_TSAUXC);
-		IXGBE_WRITE_REG(hw, IXGBE_TSAUXC,
-				tsauxc & ~IXGBE_TSAUXC_DISABLE_SYSTIME);
-		IXGBE_WRITE_REG(hw, IXGBE_TSIM, IXGBE_TSIM_TXTS);
-		IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_TIMESYNC);
-
-		IXGBE_WRITE_FLUSH(hw);
 		break;
 	case ixgbe_mac_X540:
 		cc.read = ixgbe_ptp_read_82599;
@@ -1292,6 +1279,50 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
 	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
 }
 
+/**
+ * ixgbe_ptp_init_systime - Initialize SYSTIME registers
+ * @adapter: the ixgbe private board structure
+ *
+ * Initialize and start the SYSTIME registers.
+ */
+static void ixgbe_ptp_init_systime(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 tsauxc;
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_x550em_a:
+	case ixgbe_mac_X550:
+		tsauxc = IXGBE_READ_REG(hw, IXGBE_TSAUXC);
+
+		/* Reset SYSTIME registers to 0 */
+		IXGBE_WRITE_REG(hw, IXGBE_SYSTIMR, 0);
+		IXGBE_WRITE_REG(hw, IXGBE_SYSTIML, 0);
+		IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0);
+
+		/* Reset interrupt settings */
+		IXGBE_WRITE_REG(hw, IXGBE_TSIM, IXGBE_TSIM_TXTS);
+		IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_TIMESYNC);
+
+		/* Activate the SYSTIME counter */
+		IXGBE_WRITE_REG(hw, IXGBE_TSAUXC,
+				tsauxc & ~IXGBE_TSAUXC_DISABLE_SYSTIME);
+		break;
+	case ixgbe_mac_X540:
+	case ixgbe_mac_82599EB:
+		/* Reset SYSTIME registers to 0 */
+		IXGBE_WRITE_REG(hw, IXGBE_SYSTIML, 0);
+		IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0);
+		break;
+	default:
+		/* Other devices aren't supported */
+		return;
+	};
+
+	IXGBE_WRITE_FLUSH(hw);
+}
+
 /**
  * ixgbe_ptp_reset
  * @adapter: the ixgbe private board structure
@@ -1318,6 +1349,8 @@ void ixgbe_ptp_reset(struct ixgbe_adapter *adapter)
 
 	ixgbe_ptp_start_cyclecounter(adapter);
 
+	ixgbe_ptp_init_systime(adapter);
+
 	spin_lock_irqsave(&adapter->tmreg_lock, flags);
 	timecounter_init(&adapter->hw_tc, &adapter->hw_cc,
 			 ktime_to_ns(ktime_get_real()));