Skip to content

Commit

Permalink
x86, ACPI, mm: Revert movablemem_map support
Browse files Browse the repository at this point in the history
Tim found:

  WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane.isra.2+0x6f/0x80()
  Hardware name: S2600CP
  sched: CPU #1's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency.
  smpboot: Booting Node   1, Processors  #1
  Modules linked in:
  Pid: 0, comm: swapper/1 Not tainted 3.9.0-0-generic #1
  Call Trace:
    set_cpu_sibling_map+0x279/0x449
    start_secondary+0x11d/0x1e5

Don Morris reproduced on a HP z620 workstation, and bisected it to
commit e8d1955 ("acpi, memory-hotplug: parse SRAT before memblock
is ready")

It turns out movable_map has some problems, and it breaks several things

1. numa_init is called several times, NOT just for srat. so those
	nodes_clear(numa_nodes_parsed)
	memset(&numa_meminfo, 0, sizeof(numa_meminfo))
   can not be just removed.  Need to consider sequence is: numaq, srat, amd, dummy.
   and make fall back path working.

2. simply split acpi_numa_init to early_parse_srat.
   a. that early_parse_srat is NOT called for ia64, so you break ia64.
   b.  for (i = 0; i < MAX_LOCAL_APIC; i++)
	     set_apicid_to_node(i, NUMA_NO_NODE)
     still left in numa_init. So it will just clear result from early_parse_srat.
     it should be moved before that....
   c.  it breaks ACPI_TABLE_OVERIDE...as the acpi table scan is moved
       early before override from INITRD is settled.

3. that patch TITLE is total misleading, there is NO x86 in the title,
   but it changes critical x86 code. It caused x86 guys did not
   pay attention to find the problem early. Those patches really should
   be routed via tip/x86/mm.

4. after that commit, following range can not use movable ram:
  a. real_mode code.... well..funny, legacy Node0 [0,1M) could be hot-removed?
  b. initrd... it will be freed after booting, so it could be on movable...
  c. crashkernel for kdump...: looks like we can not put kdump kernel above 4G
	anymore.
  d. init_mem_mapping: can not put page table high anymore.
  e. initmem_init: vmemmap can not be high local node anymore. That is
     not good.

If node is hotplugable, the mem related range like page table and
vmemmap could be on the that node without problem and should be on that
node.

We have workaround patch that could fix some problems, but some can not
be fixed.

So just remove that offending commit and related ones including:

 f7210e6 ("mm/memblock.c: use CONFIG_HAVE_MEMBLOCK_NODE_MAP to
    protect movablecore_map in memblock_overlaps_region().")

 01a178a ("acpi, memory-hotplug: support getting hotplug info from
    SRAT")

 27168d3 ("acpi, memory-hotplug: extend movablemem_map ranges to
    the end of node")

 e8d1955 ("acpi, memory-hotplug: parse SRAT before memblock is
    ready")

 fb06bc8 ("page_alloc: bootmem limit with movablecore_map")

 42f47e2 ("page_alloc: make movablemem_map have higher priority")

 6981ec3 ("page_alloc: introduce zone_movable_limit[] to keep
    movable limit for nodes")

 34b71f1 ("page_alloc: add movable_memmap kernel parameter")

 4d59a75 ("x86: get pg_data_t's memory from other node")

Later we should have patches that will make sure kernel put page table
and vmemmap on local node ram instead of push them down to node0.  Also
need to find way to put other kernel used ram to local node ram.

Reported-by: Tim Gardner <[email protected]>
Reported-by: Don Morris <[email protected]>
Bisected-by: Don Morris <[email protected]>
Tested-by: Don Morris <[email protected]>
Signed-off-by: Yinghai Lu <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Thomas Renninger <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Tang Chen <[email protected]>
Cc: Yasuaki Ishimatsu <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
  • Loading branch information
Yinghai Lu authored and torvalds committed Mar 2, 2013
1 parent 14cc0b5 commit 20e6926
Show file tree
Hide file tree
Showing 10 changed files with 27 additions and 544 deletions.
36 changes: 0 additions & 36 deletions Documentation/kernel-parameters.txt
Original file line number Diff line number Diff line change
Expand Up @@ -1645,42 +1645,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
that the amount of memory usable for all allocations
is not too small.

movablemem_map=acpi
[KNL,X86,IA-64,PPC] This parameter is similar to
memmap except it specifies the memory map of
ZONE_MOVABLE.
This option inform the kernel to use Hot Pluggable bit
in flags from SRAT from ACPI BIOS to determine which
memory devices could be hotplugged. The corresponding
memory ranges will be set as ZONE_MOVABLE.
NOTE: Whatever node the kernel resides in will always
be un-hotpluggable.

movablemem_map=nn[KMG]@ss[KMG]
[KNL,X86,IA-64,PPC] This parameter is similar to
memmap except it specifies the memory map of
ZONE_MOVABLE.
If user specifies memory ranges, the info in SRAT will
be ingored. And it works like the following:
- If more ranges are all within one node, then from
lowest ss to the end of the node will be ZONE_MOVABLE.
- If a range is within a node, then from ss to the end
of the node will be ZONE_MOVABLE.
- If a range covers two or more nodes, then from ss to
the end of the 1st node will be ZONE_MOVABLE, and all
the rest nodes will only have ZONE_MOVABLE.
If memmap is specified at the same time, the
movablemem_map will be limited within the memmap
areas. If kernelcore or movablecore is also specified,
movablemem_map will have higher priority to be
satisfied. So the administrator should be careful that
the amount of movablemem_map areas are not too large.
Otherwise kernel won't have enough memory to start.
NOTE: We don't stop users specifying the node the
kernel resides in as hotpluggable so that this
option can be used as a workaround of firmware
bugs.

MTD_Partition= [MTD]
Format: <name>,<region-number>,<size>,<offset>

Expand Down
13 changes: 4 additions & 9 deletions arch/x86/kernel/setup.c
Original file line number Diff line number Diff line change
Expand Up @@ -1056,15 +1056,6 @@ void __init setup_arch(char **cmdline_p)
setup_bios_corruption_check();
#endif

/*
* In the memory hotplug case, the kernel needs info from SRAT to
* determine which memory is hotpluggable before allocating memory
* using memblock.
*/
acpi_boot_table_init();
early_acpi_boot_init();
early_parse_srat();

#ifdef CONFIG_X86_32
printk(KERN_DEBUG "initial memory mapped: [mem 0x00000000-%#010lx]\n",
(max_pfn_mapped<<PAGE_SHIFT) - 1);
Expand Down Expand Up @@ -1110,6 +1101,10 @@ void __init setup_arch(char **cmdline_p)
/*
* Parse the ACPI tables for possible boot-time SMP configuration.
*/
acpi_boot_table_init();

early_acpi_boot_init();

initmem_init();
memblock_find_dma_reserve();

Expand Down
11 changes: 5 additions & 6 deletions arch/x86/mm/numa.c
Original file line number Diff line number Diff line change
Expand Up @@ -212,9 +212,10 @@ static void __init setup_node_data(int nid, u64 start, u64 end)
* Allocate node data. Try node-local memory and then any node.
* Never allocate in DMA zone.
*/
nd_pa = memblock_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid);
nd_pa = memblock_alloc_nid(nd_size, SMP_CACHE_BYTES, nid);
if (!nd_pa) {
pr_err("Cannot find %zu bytes in any node\n", nd_size);
pr_err("Cannot find %zu bytes in node %d\n",
nd_size, nid);
return;
}
nd = __va(nd_pa);
Expand Down Expand Up @@ -559,12 +560,10 @@ static int __init numa_init(int (*init_func)(void))
for (i = 0; i < MAX_LOCAL_APIC; i++)
set_apicid_to_node(i, NUMA_NO_NODE);

/*
* Do not clear numa_nodes_parsed or zero numa_meminfo here, because
* SRAT was parsed earlier in early_parse_srat().
*/
nodes_clear(numa_nodes_parsed);
nodes_clear(node_possible_map);
nodes_clear(node_online_map);
memset(&numa_meminfo, 0, sizeof(numa_meminfo));
WARN_ON(memblock_set_node(0, ULLONG_MAX, MAX_NUMNODES));
numa_reset_distance();

Expand Down
125 changes: 3 additions & 122 deletions arch/x86/mm/srat.c
Original file line number Diff line number Diff line change
Expand Up @@ -141,126 +141,11 @@ static inline int save_add_info(void) {return 1;}
static inline int save_add_info(void) {return 0;}
#endif

#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
static void __init
handle_movablemem(int node, u64 start, u64 end, u32 hotpluggable)
{
int overlap, i;
unsigned long start_pfn, end_pfn;

start_pfn = PFN_DOWN(start);
end_pfn = PFN_UP(end);

/*
* For movablemem_map=acpi:
*
* SRAT: |_____| |_____| |_________| |_________| ......
* node id: 0 1 1 2
* hotpluggable: n y y n
* movablemem_map: |_____| |_________|
*
* Using movablemem_map, we can prevent memblock from allocating memory
* on ZONE_MOVABLE at boot time.
*
* Before parsing SRAT, memblock has already reserve some memory ranges
* for other purposes, such as for kernel image. We cannot prevent
* kernel from using these memory, so we need to exclude these memory
* even if it is hotpluggable.
* Furthermore, to ensure the kernel has enough memory to boot, we make
* all the memory on the node which the kernel resides in
* un-hotpluggable.
*/
if (hotpluggable && movablemem_map.acpi) {
/* Exclude ranges reserved by memblock. */
struct memblock_type *rgn = &memblock.reserved;

for (i = 0; i < rgn->cnt; i++) {
if (end <= rgn->regions[i].base ||
start >= rgn->regions[i].base +
rgn->regions[i].size)
continue;

/*
* If the memory range overlaps the memory reserved by
* memblock, then the kernel resides in this node.
*/
node_set(node, movablemem_map.numa_nodes_kernel);

goto out;
}

/*
* If the kernel resides in this node, then the whole node
* should not be hotpluggable.
*/
if (node_isset(node, movablemem_map.numa_nodes_kernel))
goto out;

insert_movablemem_map(start_pfn, end_pfn);

/*
* numa_nodes_hotplug nodemask represents which nodes are put
* into movablemem_map.map[].
*/
node_set(node, movablemem_map.numa_nodes_hotplug);
goto out;
}

/*
* For movablemem_map=nn[KMG]@ss[KMG]:
*
* SRAT: |_____| |_____| |_________| |_________| ......
* node id: 0 1 1 2
* user specified: |__| |___|
* movablemem_map: |___| |_________| |______| ......
*
* Using movablemem_map, we can prevent memblock from allocating memory
* on ZONE_MOVABLE at boot time.
*
* NOTE: In this case, SRAT info will be ingored.
*/
overlap = movablemem_map_overlap(start_pfn, end_pfn);
if (overlap >= 0) {
/*
* If part of this range is in movablemem_map, we need to
* add the range after it to extend the range to the end
* of the node, because from the min address specified to
* the end of the node will be ZONE_MOVABLE.
*/
start_pfn = max(start_pfn,
movablemem_map.map[overlap].start_pfn);
insert_movablemem_map(start_pfn, end_pfn);

/*
* Set the nodemask, so that if the address range on one node
* is not continuse, we can add the subsequent ranges on the
* same node into movablemem_map.
*/
node_set(node, movablemem_map.numa_nodes_hotplug);
} else {
if (node_isset(node, movablemem_map.numa_nodes_hotplug))
/*
* Insert the range if we already have movable ranges
* on the same node.
*/
insert_movablemem_map(start_pfn, end_pfn);
}
out:
return;
}
#else /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
static inline void
handle_movablemem(int node, u64 start, u64 end, u32 hotpluggable)
{
}
#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */

/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
int __init
acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
{
u64 start, end;
u32 hotpluggable;
int node, pxm;

if (srat_disabled())
Expand All @@ -269,8 +154,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
goto out_err_bad_srat;
if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
goto out_err;
hotpluggable = ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE;
if (hotpluggable && !save_add_info())
if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && !save_add_info())
goto out_err;

start = ma->base_address;
Expand All @@ -290,12 +174,9 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)

node_set(node, numa_nodes_parsed);

printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx] %s\n",
printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n",
node, pxm,
(unsigned long long) start, (unsigned long long) end - 1,
hotpluggable ? "Hot Pluggable": "");

handle_movablemem(node, start, end, hotpluggable);
(unsigned long long) start, (unsigned long long) end - 1);

return 0;
out_err_bad_srat:
Expand Down
23 changes: 10 additions & 13 deletions drivers/acpi/numa.c
Original file line number Diff line number Diff line change
Expand Up @@ -282,10 +282,10 @@ acpi_table_parse_srat(enum acpi_srat_type id,
handler, max_entries);
}

static int srat_mem_cnt;

void __init early_parse_srat(void)
int __init acpi_numa_init(void)
{
int cnt = 0;

/*
* Should not limit number with cpu num that is from NR_CPUS or nr_cpus=
* SRAT cpu entries could have different order with that in MADT.
Expand All @@ -295,24 +295,21 @@ void __init early_parse_srat(void)
/* SRAT: Static Resource Affinity Table */
if (!acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat)) {
acpi_table_parse_srat(ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY,
acpi_parse_x2apic_affinity, 0);
acpi_parse_x2apic_affinity, 0);
acpi_table_parse_srat(ACPI_SRAT_TYPE_CPU_AFFINITY,
acpi_parse_processor_affinity, 0);
srat_mem_cnt = acpi_table_parse_srat(ACPI_SRAT_TYPE_MEMORY_AFFINITY,
acpi_parse_memory_affinity,
NR_NODE_MEMBLKS);
acpi_parse_processor_affinity, 0);
cnt = acpi_table_parse_srat(ACPI_SRAT_TYPE_MEMORY_AFFINITY,
acpi_parse_memory_affinity,
NR_NODE_MEMBLKS);
}
}

int __init acpi_numa_init(void)
{
/* SLIT: System Locality Information Table */
acpi_table_parse(ACPI_SIG_SLIT, acpi_parse_slit);

acpi_numa_arch_fixup();

if (srat_mem_cnt < 0)
return srat_mem_cnt;
if (cnt < 0)
return cnt;
else if (!parsed_numa_memblks)
return -ENOENT;
return 0;
Expand Down
8 changes: 0 additions & 8 deletions include/linux/acpi.h
Original file line number Diff line number Diff line change
Expand Up @@ -485,14 +485,6 @@ static inline bool acpi_driver_match_device(struct device *dev,

#endif /* !CONFIG_ACPI */

#ifdef CONFIG_ACPI_NUMA
void __init early_parse_srat(void);
#else
static inline void early_parse_srat(void)
{
}
#endif

#ifdef CONFIG_ACPI
void acpi_os_set_prepare_sleep(int (*func)(u8 sleep_state,
u32 pm1a_ctrl, u32 pm1b_ctrl));
Expand Down
2 changes: 0 additions & 2 deletions include/linux/memblock.h
Original file line number Diff line number Diff line change
Expand Up @@ -42,7 +42,6 @@ struct memblock {

extern struct memblock memblock;
extern int memblock_debug;
extern struct movablemem_map movablemem_map;

#define memblock_dbg(fmt, ...) \
if (memblock_debug) printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
Expand All @@ -61,7 +60,6 @@ int memblock_reserve(phys_addr_t base, phys_addr_t size);
void memblock_trim_memory(phys_addr_t align);

#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP

void __next_mem_pfn_range(int *idx, int nid, unsigned long *out_start_pfn,
unsigned long *out_end_pfn, int *out_nid);

Expand Down
18 changes: 0 additions & 18 deletions include/linux/mm.h
Original file line number Diff line number Diff line change
Expand Up @@ -1333,24 +1333,6 @@ extern void free_bootmem_with_active_regions(int nid,
unsigned long max_low_pfn);
extern void sparse_memory_present_with_active_regions(int nid);

#define MOVABLEMEM_MAP_MAX MAX_NUMNODES
struct movablemem_entry {
unsigned long start_pfn; /* start pfn of memory segment */
unsigned long end_pfn; /* end pfn of memory segment (exclusive) */
};

struct movablemem_map {
bool acpi; /* true if using SRAT info */
int nr_map;
struct movablemem_entry map[MOVABLEMEM_MAP_MAX];
nodemask_t numa_nodes_hotplug; /* on which nodes we specify memory */
nodemask_t numa_nodes_kernel; /* on which nodes kernel resides in */
};

extern void __init insert_movablemem_map(unsigned long start_pfn,
unsigned long end_pfn);
extern int __init movablemem_map_overlap(unsigned long start_pfn,
unsigned long end_pfn);
#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */

#if !defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) && \
Expand Down
Loading

0 comments on commit 20e6926

Please sign in to comment.