Merge branch 'topic/hda' into for-linus

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -860,7 +860,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     [Multiple options for each card instance]
     model	- force the model name
-    position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
+    position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF,
+    		   3 = VIACOMBO, 4 = COMBO)
     probe_mask  - Bitmask to probe codecs (default = -1, meaning all slots)
     		  When the bit 8 (0x100) is set, the lower 8 bits are used
 		  as the "fixed" codec slots; i.e. the driver probes the
@@ -925,6 +926,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	    (Usually SD_LPIB register is more accurate than the
 	    position buffer.)
 
+	    position_fix=3 is specific to VIA devices.  The position
+	    of the capture stream is checked from both LPIB and POSBUF
+	    values.  position_fix=4 is a combination mode, using LPIB
+	    for playback and POSBUF for capture.
+
     NB: If you get many "azx_get_response timeout" messages at
     loading, it's likely a problem of interrupts (e.g. ACPI irq
     routing).  Try to boot with options like "pci=noacpi".  Also, you

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -8,37 +8,10 @@ ALC880
   5stack-digout	5-jack in back, 2-jack in front, a SPDIF out
   6stack	6-jack in back, 2-jack in front
   6stack-digout	6-jack with a SPDIF out
-  w810		3-jack
-  z71v		3-jack (HP shared SPDIF)
-  asus		3-jack (ASUS Mobo)
-  asus-w1v	ASUS W1V
-  asus-dig	ASUS with SPDIF out
-  asus-dig2	ASUS with SPDIF out (using GPIO2)
-  uniwill	3-jack
-  fujitsu	Fujitsu Laptops (Pi1536)
-  F1734		2-jack
-  lg		LG laptop (m1 express dual)
-  lg-lw		LG LW20/LW25 laptop
-  tcl		TCL S700
-  clevo		Clevo laptops (m520G, m665n)
-  medion	Medion Rim 2150
-  test		for testing/debugging purpose, almost all controls can be
-		adjusted.  Appearing only when compiled with
-		$CONFIG_SND_DEBUG=y
-  auto		auto-config reading BIOS (default)
 
 ALC260
 ======
-  fujitsu	Fujitsu S7020
-  acer		Acer TravelMate
-  will		Will laptops (PB V7900)
-  replacer	Replacer 672V
-  favorit100	Maxdata Favorit 100XS
-  basic		fixed pin assignment (old default model)
-  test		for testing/debugging purpose, almost all controls can
-		adjusted.  Appearing only when compiled with
-		$CONFIG_SND_DEBUG=y
-  auto		auto-config reading BIOS (default)
+  N/A
 
 ALC262
 ======
@@ -70,55 +43,7 @@ ALC680
 
 ALC882/883/885/888/889
 ======================
-  3stack-dig	3-jack with SPDIF I/O
-  6stack-dig	6-jack digital with SPDIF I/O
-  arima		Arima W820Di1
-  targa		Targa T8, MSI-1049 T8
-  asus-a7j	ASUS A7J
-  asus-a7m	ASUS A7M
-  macpro	MacPro support
-  mb5		Macbook 5,1
-  macmini3	Macmini 3,1
-  mba21		Macbook Air 2,1
-  mbp3		Macbook Pro rev3
-  imac24	iMac 24'' with jack detection
-  imac91	iMac 9,1
-  w2jc		ASUS W2JC
-  3stack-2ch-dig	3-jack with SPDIF I/O (ALC883)
-  alc883-6stack-dig	6-jack digital with SPDIF I/O (ALC883)
-  3stack-6ch    3-jack 6-channel
-  3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
-  6stack-dig-demo  6-jack digital for Intel demo board
-  acer		Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
-  acer-aspire	Acer Aspire 9810
-  acer-aspire-4930g Acer Aspire 4930G
-  acer-aspire-6530g Acer Aspire 6530G
-  acer-aspire-7730g Acer Aspire 7730G
-  acer-aspire-8930g Acer Aspire 8930G
-  medion	Medion Laptops
-  targa-dig	Targa/MSI
-  targa-2ch-dig	Targa/MSI with 2-channel
-  targa-8ch-dig Targa/MSI with 8-channel (MSI GX620)
-  laptop-eapd   3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
-  lenovo-101e	Lenovo 101E
-  lenovo-nb0763	Lenovo NB0763
-  lenovo-ms7195-dig Lenovo MS7195
-  lenovo-sky	Lenovo Sky
-  haier-w66	Haier W66
-  3stack-hp	HP machines with 3stack (Lucknow, Samba boards)
-  6stack-dell	Dell machines with 6stack (Inspiron 530)
-  mitac		Mitac 8252D
-  clevo-m540r	Clevo M540R (6ch + digital)
-  clevo-m720	Clevo M720 laptop series
-  fujitsu-pi2515 Fujitsu AMILO Pi2515
-  fujitsu-xa3530 Fujitsu AMILO XA3530
-  3stack-6ch-intel Intel DG33* boards
-  intel-alc889a	Intel IbexPeak with ALC889A
-  intel-x58	Intel DX58 with ALC889
-  asus-p5q	ASUS P5Q-EM boards
-  mb31		MacBook 3,1
-  sony-vaio-tt  Sony VAIO TT
-  auto		auto-config reading BIOS (default)
+  N/A
 
 ALC861/660
 ==========

Documentation/sound/alsa/HD-Audio.txt

@@ -59,7 +59,12 @@ a case, you can change the default method via `position_fix` option.
 `position_fix=1` means to use LPIB method explicitly.
 `position_fix=2` means to use the position-buffer.
 `position_fix=3` means to use a combination of both methods, needed
-for some VIA and ATI controllers.  0 is the default value for all other
+for some VIA controllers.  The capture stream position is corrected
+by comparing both LPIB and position-buffer values.
+`position_fix=4` is another combination available for all controllers,
+and uses LPIB for the playback and the position-buffer for the capture
+streams.
+0 is the default value for all other
 controllers, the automatic check and fallback to LPIB as described in
 the above.  If you get a problem of repeated sounds, this option might
 help.

include/sound/control.h

@@ -227,6 +227,11 @@ snd_ctl_add_slave_uncached(struct snd_kcontrol *master,
 	return _snd_ctl_add_slave(master, slave, SND_CTL_SLAVE_NEED_UPDATE);
 }
 
+int snd_ctl_add_vmaster_hook(struct snd_kcontrol *kctl,
+			     void (*hook)(void *private_data, int),
+			     void *private_data);
+void snd_ctl_sync_vmaster_hook(struct snd_kcontrol *kctl);
+
 /*
  * Helper functions for jack-detection controls
  */

sound/core/vmaster.c

@@ -37,6 +37,8 @@ struct link_master {
 	struct link_ctl_info info;
 	int val;		/* the master value */
 	unsigned int tlv[4];
+	void (*hook)(void *private_data, int);
+	void *hook_private_data;
 };
 
 /*
@@ -126,7 +128,9 @@ static int master_init(struct link_master *master)
 		master->info.count = 1; /* always mono */
 		/* set full volume as default (= no attenuation) */
 		master->val = master->info.max_val;
-		return 0;
+		if (master->hook)
+			master->hook(master->hook_private_data, master->val);
+		return 1;
 	}
 	return -ENOENT;
 }
@@ -329,6 +333,8 @@ static int master_put(struct snd_kcontrol *kcontrol,
 		slave_put_val(slave, uval);
 	}
 	kfree(uval);
+	if (master->hook && !err)
+		master->hook(master->hook_private_data, master->val);
 	return 1;
 }
 
@@ -408,3 +414,41 @@ struct snd_kcontrol *snd_ctl_make_virtual_master(char *name,
 	return kctl;
 }
 EXPORT_SYMBOL(snd_ctl_make_virtual_master);
+
+/**
+ * snd_ctl_add_vmaster_hook - Add a hook to a vmaster control
+ * @kcontrol: vmaster kctl element
+ * @hook: the hook function
+ *
+ * Adds the given hook to the vmaster control element so that it's called
+ * at each time when the value is changed.
+ */
+int snd_ctl_add_vmaster_hook(struct snd_kcontrol *kcontrol,
+			     void (*hook)(void *private_data, int),
+			     void *private_data)
+{
+	struct link_master *master = snd_kcontrol_chip(kcontrol);
+	master->hook = hook;
+	master->hook_private_data = private_data;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(snd_ctl_add_vmaster_hook);
+
+/**
+ * snd_ctl_sync_vmaster_hook - Sync the vmaster hook
+ * @kcontrol: vmaster kctl element
+ *
+ * Call the hook function to synchronize with the current value of the given
+ * vmaster element.  NOP when NULL is passed to @kcontrol or the hook doesn't
+ * exist.
+ */
+void snd_ctl_sync_vmaster_hook(struct snd_kcontrol *kcontrol)
+{
+	struct link_master *master;
+	if (!kcontrol)
+		return;
+	master = snd_kcontrol_chip(kcontrol);
+	if (master->hook)
+		master->hook(master->hook_private_data, master->val);
+}
+EXPORT_SYMBOL_GPL(snd_ctl_sync_vmaster_hook);