Merge tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/tiwai/sound

Pull updates of sound stuff from Takashi Iwai:
 "Here is the first big update chunk of sound stuff for 3.4-rc1.

  In the common sound infrastructure, there are a few changes for
  dynamic PCM support (used in ASoC) and a few clean-ups.  Majority of
  changes are found, as usual, in HD-audio and ASoC.

  Some highlights of HD-audio changes:

   - All the long-standing static quirk codes for Realtek codec were
     finally removed by fixing and extending the Realtek auto-parser.

   - The mute-LED control is standardized over all HD-audio codec
     drivers using the extended vmaster hook.

   - The vmaster slave mixer elements are initialized to 0dB as default
     so that the user won't be annoyed by the silent output after
     updates, e.g.  due to the additions of new elements.

   - Other many fix-ups for the misc HD-audio devices.

  In the ASoC side, this is a very active release, including a quite a
  few framework enhancements.  Some highlights:

   - Support for widgets not associated with a CODEC, an important part
     of the dynamic PCM framework.

   - A library factoring out the common code shared by dmaengine based
     DMA drivers contributed by Lars-Peter Clausen.  This will save a
     lot of code and make it much easier to deploy enhancements to
     dmaengine.

   - Support for binary controls, used for providing runtime
     configuration of algorithm coefficients.

   - A new DAPM widget type for regulator supplies allowing drivers for
     devices that can power down unused supplies while active to do
     without any per-driver code.

   - DAPM widgets for DAIs, initially giving a speed boost for playback
     startup and shutdown and also the basis for CODEC<->CODEC DAI link
     support.

   - Support for specifying the number of significant bits on audio
     interfaces, useful for allowing applications to know how much
     effort to put into generating data for a larger sample format.

   - Conversion of the FSI driver used on some SH processors to
     DMAEngine.

   - Conversion of EP93xx drivers to DMAEngine.

   - New CODEC drivers for Maxim MAX9768 and Wolfson Microelectronics
     WM2200.

   - Move audmux driver from arc/arm to sound/soc

   - McBSP move from arch/ to sound/ and updates

  Also, a few small updates and fixes for other drivers like au88x0,
  ymfpci, USB 6fire, USB usx2yaudio are included."

* tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (446 commits)
  ASoC: wm8994: Provide VMID mode control and fix default sequence
  ASoC: wm8994: Add missing break in resume
  ASoC: wm_hubs: Don't actively manage LINEOUT_VMID_BUF
  ASoC: pxa-ssp: atomically set stream active masks
  ASoC: fsl: p1022ds: tell the WM8776 codec driver that it's the master
  ASoC: Samsung: Added to support mono recording
  ALSA: hda - Fix build with CONFIG_PM=n
  ALSA: au88x0 - Avoid possible Oops at unbinding
  ALSA: usb-audio - Fix build error by consitification of rate list
  ASoC: core: Fix obscure leak of runtime array
  ALSA: pcm - Avoid GFP_ATOMIC in snd_pcm_link()
  ALSA: pcm: Constify the list in snd_pcm_hw_constraint_list
  ASoC: wm8996: Add 44.1kHz support
  ALSA: hda - Fix build of patch_sigmatel.c without CONFIG_SND_HDA_POWER_SAVE
  ASoC: mx27vis-aic32x4: Convert it to platform driver
  ALSA: hda - fix printing of high HDMI sample rates
  ALSA: ymfpci - Fix legacy registers on S3/S4 resume
  ALSA: control - Fixe a trailing white space error
  ALSA: hda - Add expose_enum_ctl flag to snd_hda_add_vmaster_hook()
  ALSA: hda - Add "Mute-LED Mode" enum control
  ...

Documentation/devicetree/bindings/sound/alc5632.txt

@@ -0,0 +1,24 @@
+ALC5632 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "realtek,alc5632"
+
+  - reg : the I2C address of the device.
+
+  - gpio-controller : Indicates this device is a GPIO controller.
+
+  - #gpio-cells : Should be two. The first cell is the pin number and the
+    second cell is used to specify optional parameters (currently unused).
+
+Example:
+
+alc5632: alc5632@1e {
+	compatible = "realtek,alc5632";
+	reg = <0x1a>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+};

Documentation/devicetree/bindings/sound/imx-audmux.txt

@@ -0,0 +1,13 @@
+Freescale Digital Audio Mux (AUDMUX) device
+
+Required properties:
+- compatible : "fsl,imx21-audmux" for AUDMUX version firstly used on i.MX21,
+  or "fsl,imx31-audmux" for the version firstly used on i.MX31.
+- reg : Should contain AUDMUX registers location and length
+
+Example:
+
+audmux@021d8000 {
+	compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
+	reg = <0x021d8000 0x4000>;
+};

Documentation/devicetree/bindings/sound/tegra-audio-alc5632.txt

@@ -0,0 +1,59 @@
+NVIDIA Tegra audio complex
+
+Required properties:
+- compatible : "nvidia,tegra-audio-alc5632"
+- nvidia,model : The user-visible name of this sound complex.
+- nvidia,audio-routing : A list of the connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source. Valid names for sources and
+  sinks are the ALC5632's pins:
+
+  ALC5632 pins:
+
+  * SPK_OUTP
+  * SPK_OUTN
+  * HP_OUT_L
+  * HP_OUT_R
+  * AUX_OUT_P
+  * AUX_OUT_N
+  * LINE_IN_L
+  * LINE_IN_R
+  * PHONE_P
+  * PHONE_N
+  * MIC1_P
+  * MIC1_N
+  * MIC2_P
+  * MIC2_N
+  * MICBIAS1
+  * DMICDAT
+
+  Board connectors:
+
+  * Headset Stereophone
+  * Int Spk
+  * Headset Mic
+  * Digital Mic
+
+- nvidia,i2s-controller : The phandle of the Tegra I2S controller
+- nvidia,audio-codec : The phandle of the ALC5632 audio codec
+
+Example:
+
+sound {
+	compatible = "nvidia,tegra-audio-alc5632-paz00",
+				 "nvidia,tegra-audio-alc5632";
+
+	nvidia,model = "Compal PAZ00";
+
+	nvidia,audio-routing =
+				"Int Spk", "SPK_OUTP",
+				"Int Spk", "SPK_OUTN",
+				"Headset Mic","MICBIAS1",
+				"MIC1_N", "Headset Mic",
+				"MIC1_P", "Headset Mic",
+				"Headset Stereophone", "HP_OUT_R",
+				"Headset Stereophone", "HP_OUT_L";
+
+	nvidia,i2s-controller = <&tegra_i2s1>;
+	nvidia,audio-codec = <&alc5632>;
+};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -34,6 +34,7 @@ picochip	Picochip Ltd
 powervr	Imagination Technologies
 qcom	Qualcomm, Inc.
 ramtron	Ramtron International
+realtek Realtek Semiconductor Corp.
 samsung	Samsung Semiconductor
 sbs	Smart Battery System
 schindler	Schindler

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -860,7 +860,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     [Multiple options for each card instance]
     model	- force the model name
-    position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
+    position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF,
+    		   3 = VIACOMBO, 4 = COMBO)
     probe_mask  - Bitmask to probe codecs (default = -1, meaning all slots)
     		  When the bit 8 (0x100) is set, the lower 8 bits are used
 		  as the "fixed" codec slots; i.e. the driver probes the
@@ -925,6 +926,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	    (Usually SD_LPIB register is more accurate than the
 	    position buffer.)
 
+	    position_fix=3 is specific to VIA devices.  The position
+	    of the capture stream is checked from both LPIB and POSBUF
+	    values.  position_fix=4 is a combination mode, using LPIB
+	    for playback and POSBUF for capture.
+
     NB: If you get many "azx_get_response timeout" messages at
     loading, it's likely a problem of interrupts (e.g. ACPI irq
     routing).  Try to boot with options like "pci=noacpi".  Also, you

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -8,37 +8,10 @@ ALC880
   5stack-digout	5-jack in back, 2-jack in front, a SPDIF out
   6stack	6-jack in back, 2-jack in front
   6stack-digout	6-jack with a SPDIF out
-  w810		3-jack
-  z71v		3-jack (HP shared SPDIF)
-  asus		3-jack (ASUS Mobo)
-  asus-w1v	ASUS W1V
-  asus-dig	ASUS with SPDIF out
-  asus-dig2	ASUS with SPDIF out (using GPIO2)
-  uniwill	3-jack
-  fujitsu	Fujitsu Laptops (Pi1536)
-  F1734		2-jack
-  lg		LG laptop (m1 express dual)
-  lg-lw		LG LW20/LW25 laptop
-  tcl		TCL S700
-  clevo		Clevo laptops (m520G, m665n)
-  medion	Medion Rim 2150
-  test		for testing/debugging purpose, almost all controls can be
-		adjusted.  Appearing only when compiled with
-		$CONFIG_SND_DEBUG=y
-  auto		auto-config reading BIOS (default)
 
 ALC260
 ======
-  fujitsu	Fujitsu S7020
-  acer		Acer TravelMate
-  will		Will laptops (PB V7900)
-  replacer	Replacer 672V
-  favorit100	Maxdata Favorit 100XS
-  basic		fixed pin assignment (old default model)
-  test		for testing/debugging purpose, almost all controls can
-		adjusted.  Appearing only when compiled with
-		$CONFIG_SND_DEBUG=y
-  auto		auto-config reading BIOS (default)
+  N/A
 
 ALC262
 ======
@@ -70,55 +43,7 @@ ALC680
 
 ALC882/883/885/888/889
 ======================
-  3stack-dig	3-jack with SPDIF I/O
-  6stack-dig	6-jack digital with SPDIF I/O
-  arima		Arima W820Di1
-  targa		Targa T8, MSI-1049 T8
-  asus-a7j	ASUS A7J
-  asus-a7m	ASUS A7M
-  macpro	MacPro support
-  mb5		Macbook 5,1
-  macmini3	Macmini 3,1
-  mba21		Macbook Air 2,1
-  mbp3		Macbook Pro rev3
-  imac24	iMac 24'' with jack detection
-  imac91	iMac 9,1
-  w2jc		ASUS W2JC
-  3stack-2ch-dig	3-jack with SPDIF I/O (ALC883)
-  alc883-6stack-dig	6-jack digital with SPDIF I/O (ALC883)
-  3stack-6ch    3-jack 6-channel
-  3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
-  6stack-dig-demo  6-jack digital for Intel demo board
-  acer		Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
-  acer-aspire	Acer Aspire 9810
-  acer-aspire-4930g Acer Aspire 4930G
-  acer-aspire-6530g Acer Aspire 6530G
-  acer-aspire-7730g Acer Aspire 7730G
-  acer-aspire-8930g Acer Aspire 8930G
-  medion	Medion Laptops
-  targa-dig	Targa/MSI
-  targa-2ch-dig	Targa/MSI with 2-channel
-  targa-8ch-dig Targa/MSI with 8-channel (MSI GX620)
-  laptop-eapd   3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
-  lenovo-101e	Lenovo 101E
-  lenovo-nb0763	Lenovo NB0763
-  lenovo-ms7195-dig Lenovo MS7195
-  lenovo-sky	Lenovo Sky
-  haier-w66	Haier W66
-  3stack-hp	HP machines with 3stack (Lucknow, Samba boards)
-  6stack-dell	Dell machines with 6stack (Inspiron 530)
-  mitac		Mitac 8252D
-  clevo-m540r	Clevo M540R (6ch + digital)
-  clevo-m720	Clevo M720 laptop series
-  fujitsu-pi2515 Fujitsu AMILO Pi2515
-  fujitsu-xa3530 Fujitsu AMILO XA3530
-  3stack-6ch-intel Intel DG33* boards
-  intel-alc889a	Intel IbexPeak with ALC889A
-  intel-x58	Intel DX58 with ALC889
-  asus-p5q	ASUS P5Q-EM boards
-  mb31		MacBook 3,1
-  sony-vaio-tt  Sony VAIO TT
-  auto		auto-config reading BIOS (default)
+  N/A
 
 ALC861/660
 ==========

Documentation/sound/alsa/HD-Audio.txt

@@ -59,7 +59,12 @@ a case, you can change the default method via `position_fix` option.
 `position_fix=1` means to use LPIB method explicitly.
 `position_fix=2` means to use the position-buffer.
 `position_fix=3` means to use a combination of both methods, needed
-for some VIA and ATI controllers.  0 is the default value for all other
+for some VIA controllers.  The capture stream position is corrected
+by comparing both LPIB and position-buffer values.
+`position_fix=4` is another combination available for all controllers,
+and uses LPIB for the playback and the position-buffer for the capture
+streams.
+0 is the default value for all other
 controllers, the automatic check and fallback to LPIB as described in
 the above.  If you get a problem of repeated sounds, this option might
 help.

arch/arm/mach-ep93xx/core.c

@@ -817,23 +817,12 @@ void __init ep93xx_register_i2s(void)
 #define EP93XX_I2SCLKDIV_MASK		(EP93XX_SYSCON_I2SCLKDIV_ORIDE | \
 					 EP93XX_SYSCON_I2SCLKDIV_SPOL)
 
-int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config)
+int ep93xx_i2s_acquire(void)
 {
 	unsigned val;
 
-	/* Sanity check */
-	if (i2s_pins & ~EP93XX_SYSCON_DEVCFG_I2S_MASK)
-		return -EINVAL;
-	if (i2s_config & ~EP93XX_I2SCLKDIV_MASK)
-		return -EINVAL;
-
-	/* Must have only one of I2SONSSP/I2SONAC97 set */
-	if ((i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONSSP) ==
-	    (i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONAC97))
-		return -EINVAL;
-
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
-	ep93xx_devcfg_set_bits(i2s_pins);
+	ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97,
+			EP93XX_SYSCON_DEVCFG_I2S_MASK);
 
 	/*
 	 * This is potentially racy with the clock api for i2s_mclk, sclk and 
@@ -843,7 +832,7 @@ int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config)
 	 */
 	val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
 	val &= ~EP93XX_I2SCLKDIV_MASK;
-	val |= i2s_config;
+	val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL;
 	ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV);
 
 	return 0;

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -59,7 +59,7 @@ void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
 int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
 void ep93xx_keypad_release_gpio(struct platform_device *pdev);
 void ep93xx_register_i2s(void);
-int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config);
+int ep93xx_i2s_acquire(void);
 void ep93xx_i2s_release(void);
 void ep93xx_register_ac97(void);
 

arch/arm/mach-imx/Kconfig

@@ -46,7 +46,6 @@ config SOC_IMX21
 	bool
 	select MACH_MX21
 	select CPU_ARM926T
-	select ARCH_MXC_AUDMUX_V1
 	select IMX_HAVE_DMA_V1
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
@@ -55,15 +54,13 @@ config SOC_IMX25
 	bool
 	select ARCH_MX25
 	select CPU_ARM926T
-	select ARCH_MXC_AUDMUX_V2
 	select ARCH_MXC_IOMUX_V3
 	select MXC_AVIC
 
 config SOC_IMX27
 	bool
 	select MACH_MX27
 	select CPU_ARM926T
-	select ARCH_MXC_AUDMUX_V1
 	select IMX_HAVE_DMA_V1
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
@@ -72,15 +69,13 @@ config SOC_IMX31
 	bool
 	select CPU_V6
 	select IMX_HAVE_PLATFORM_MXC_RNGA
-	select ARCH_MXC_AUDMUX_V2
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
 
 config SOC_IMX35
 	bool
 	select CPU_V6
 	select ARCH_MXC_IOMUX_V3
-	select ARCH_MXC_AUDMUX_V2
 	select HAVE_EPIT
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
@@ -89,7 +84,6 @@ config SOC_IMX5
 	select CPU_V7
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
-	select ARCH_MXC_AUDMUX_V2
 	select ARCH_HAS_CPUFREQ
 	select ARCH_MX5
 	bool

arch/arm/mach-imx/eukrea_mbimx27-baseboard.c

@@ -32,7 +32,6 @@
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
 #include <mach/hardware.h>
-#include <mach/audmux.h>
 
 #include "devices-imx27.h"
 
@@ -306,25 +305,6 @@ void __init eukrea_mbimx27_baseboard_init(void)
 	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
 		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
 
-#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
-	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
-	/* SSI unit master I2S codec connected to SSI_PINS_4*/
-	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
-			MXC_AUDMUX_V1_PCR_SYN |
-			MXC_AUDMUX_V1_PCR_TFSDIR |
-			MXC_AUDMUX_V1_PCR_TCLKDIR |
-			MXC_AUDMUX_V1_PCR_RFSDIR |
-			MXC_AUDMUX_V1_PCR_RCLKDIR |
-			MXC_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
-			MXC_AUDMUX_V1_PCR_RFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
-			MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4)
-	);
-	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR3_SSI_PINS_4,
-			MXC_AUDMUX_V1_PCR_SYN |
-			MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0)
-	);
-#endif
-
 	imx27_add_imx_uart1(&uart_pdata);
 	imx27_add_imx_uart2(&uart_pdata);
 #if !defined(MACH_EUKREA_CPUIMX27_USEUART4)

arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c

@@ -37,7 +37,6 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx51.h>
-#include <mach/audmux.h>
 
 #include "devices-imx51.h"