Merge branch 'akpm' (Andrew's patch-bomb)

Merge second batch of patches from Andrew Morton:
 - various misc things
 - core kernel changes to prctl, exit, exec, init, etc.
 - kernel/watchdog.c updates
 - get_maintainer
 - MAINTAINERS
 - the backlight driver queue
 - core bitops code cleanups
 - the led driver queue
 - some core prio_tree work
 - checkpatch udpates
 - largeish crc32 update
 - a new poll() feature for the v4l guys
 - the rtc driver queue
 - fatfs
 - ptrace
 - signals
 - kmod/usermodehelper updates
 - coredump
 - procfs updates

* emailed from Andrew Morton <[email protected]>: (141 commits)
  seq_file: add seq_set_overflow(), seq_overflow()
  proc-ns: use d_set_d_op() API to set dentry ops in proc_ns_instantiate().
  procfs: speed up /proc/pid/stat, statm
  procfs: add num_to_str() to speed up /proc/stat
  proc: speed up /proc/stat handling
  fs/proc/kcore.c: make get_sparsemem_vmemmap_info() static
  coredump: add VM_NODUMP, MADV_NODUMP, MADV_CLEAR_NODUMP
  coredump: remove VM_ALWAYSDUMP flag
  kmod: make __request_module() killable
  kmod: introduce call_modprobe() helper
  usermodehelper: ____call_usermodehelper() doesn't need do_exit()
  usermodehelper: kill umh_wait, renumber UMH_* constants
  usermodehelper: implement UMH_KILLABLE
  usermodehelper: introduce umh_complete(sub_info)
  usermodehelper: use UMH_WAIT_PROC consistently
  signal: zap_pid_ns_processes: s/SEND_SIG_NOINFO/SEND_SIG_FORCED/
  signal: oom_kill_task: use SEND_SIG_FORCED instead of force_sig()
  signal: cosmetic, s/from_ancestor_ns/force/ in prepare_signal() paths
  signal: give SEND_SIG_FORCED more power to beat SIGNAL_UNKILLABLE
  Hexagon: use set_current_blocked() and block_sigmask()
  ...

Documentation/00-INDEX

@@ -104,6 +104,8 @@ cpuidle/
 	- info on CPU_IDLE, CPU idle state management subsystem.
 cputopology.txt
 	- documentation on how CPU topology info is exported via sysfs.
+crc32.txt
+	- brief tutorial on CRC computation
 cris/
 	- directory with info about Linux on CRIS architecture.
 crypto/

Documentation/backlight/lp855x-driver.txt

@@ -0,0 +1,78 @@
+Kernel driver lp855x
+====================
+
+Backlight driver for LP855x ICs
+
+Supported chips:
+	Texas Instruments LP8550, LP8551, LP8552, LP8553 and LP8556
+
+Author: Milo(Woogyom) Kim <[email protected]>
+
+Description
+-----------
+
+* Brightness control
+
+Brightness can be controlled by the pwm input or the i2c command.
+The lp855x driver supports both cases.
+
+* Device attributes
+
+1) bl_ctl_mode
+Backlight control mode.
+Value : pwm based or register based
+
+2) chip_id
+The lp855x chip id.
+Value : lp8550/lp8551/lp8552/lp8553/lp8556
+
+Platform data for lp855x
+------------------------
+
+For supporting platform specific data, the lp855x platform data can be used.
+
+* name : Backlight driver name. If it is not defined, default name is set.
+* mode : Brightness control mode. PWM or register based.
+* device_control : Value of DEVICE CONTROL register.
+* initial_brightness : Initial value of backlight brightness.
+* pwm_data : Platform specific pwm generation functions.
+	     Only valid when brightness is pwm input mode.
+	     Functions should be implemented by PWM driver.
+	     - pwm_set_intensity() : set duty of PWM
+	     - pwm_get_intensity() : get current duty of PWM
+* load_new_rom_data :
+	0 : use default configuration data
+	1 : update values of eeprom or eprom registers on loading driver
+* size_program : Total size of lp855x_rom_data.
+* rom_data : List of new eeprom/eprom registers.
+
+example 1) lp8552 platform data : i2c register mode with new eeprom data
+
+#define EEPROM_A5_ADDR	0xA5
+#define EEPROM_A5_VAL	0x4f	/* EN_VSYNC=0 */
+
+static struct lp855x_rom_data lp8552_eeprom_arr[] = {
+	{EEPROM_A5_ADDR, EEPROM_A5_VAL},
+};
+
+static struct lp855x_platform_data lp8552_pdata = {
+	.name = "lcd-bl",
+	.mode = REGISTER_BASED,
+	.device_control = I2C_CONFIG(LP8552),
+	.initial_brightness = INITIAL_BRT,
+	.load_new_rom_data = 1,
+	.size_program = ARRAY_SIZE(lp8552_eeprom_arr),
+	.rom_data = lp8552_eeprom_arr,
+};
+
+example 2) lp8556 platform data : pwm input mode with default rom data
+
+static struct lp855x_platform_data lp8556_pdata = {
+	.mode = PWM_BASED,
+	.device_control = PWM_CONFIG(LP8556),
+	.initial_brightness = INITIAL_BRT,
+	.pwm_data = {
+		     .pwm_set_intensity = platform_pwm_set_intensity,
+		     .pwm_get_intensity = platform_pwm_get_intensity,
+		     },
+};

Documentation/crc32.txt

@@ -0,0 +1,182 @@
+A brief CRC tutorial.
+
+A CRC is a long-division remainder.  You add the CRC to the message,
+and the whole thing (message+CRC) is a multiple of the given
+CRC polynomial.  To check the CRC, you can either check that the
+CRC matches the recomputed value, *or* you can check that the
+remainder computed on the message+CRC is 0.  This latter approach
+is used by a lot of hardware implementations, and is why so many
+protocols put the end-of-frame flag after the CRC.
+
+It's actually the same long division you learned in school, except that
+- We're working in binary, so the digits are only 0 and 1, and
+- When dividing polynomials, there are no carries.  Rather than add and
+  subtract, we just xor.  Thus, we tend to get a bit sloppy about
+  the difference between adding and subtracting.
+
+Like all division, the remainder is always smaller than the divisor.
+To produce a 32-bit CRC, the divisor is actually a 33-bit CRC polynomial.
+Since it's 33 bits long, bit 32 is always going to be set, so usually the
+CRC is written in hex with the most significant bit omitted.  (If you're
+familiar with the IEEE 754 floating-point format, it's the same idea.)
+
+Note that a CRC is computed over a string of *bits*, so you have
+to decide on the endianness of the bits within each byte.  To get
+the best error-detecting properties, this should correspond to the
+order they're actually sent.  For example, standard RS-232 serial is
+little-endian; the most significant bit (sometimes used for parity)
+is sent last.  And when appending a CRC word to a message, you should
+do it in the right order, matching the endianness.
+
+Just like with ordinary division, you proceed one digit (bit) at a time.
+Each step of the division you take one more digit (bit) of the dividend
+and append it to the current remainder.  Then you figure out the
+appropriate multiple of the divisor to subtract to being the remainder
+back into range.  In binary, this is easy - it has to be either 0 or 1,
+and to make the XOR cancel, it's just a copy of bit 32 of the remainder.
+
+When computing a CRC, we don't care about the quotient, so we can
+throw the quotient bit away, but subtract the appropriate multiple of
+the polynomial from the remainder and we're back to where we started,
+ready to process the next bit.
+
+A big-endian CRC written this way would be coded like:
+for (i = 0; i < input_bits; i++) {
+	multiple = remainder & 0x80000000 ? CRCPOLY : 0;
+	remainder = (remainder << 1 | next_input_bit()) ^ multiple;
+}
+
+Notice how, to get at bit 32 of the shifted remainder, we look
+at bit 31 of the remainder *before* shifting it.
+
+But also notice how the next_input_bit() bits we're shifting into
+the remainder don't actually affect any decision-making until
+32 bits later.  Thus, the first 32 cycles of this are pretty boring.
+Also, to add the CRC to a message, we need a 32-bit-long hole for it at
+the end, so we have to add 32 extra cycles shifting in zeros at the
+end of every message,
+
+These details lead to a standard trick: rearrange merging in the
+next_input_bit() until the moment it's needed.  Then the first 32 cycles
+can be precomputed, and merging in the final 32 zero bits to make room
+for the CRC can be skipped entirely.  This changes the code to:
+
+for (i = 0; i < input_bits; i++) {
+	remainder ^= next_input_bit() << 31;
+	multiple = (remainder & 0x80000000) ? CRCPOLY : 0;
+	remainder = (remainder << 1) ^ multiple;
+}
+
+With this optimization, the little-endian code is particularly simple:
+for (i = 0; i < input_bits; i++) {
+	remainder ^= next_input_bit();
+	multiple = (remainder & 1) ? CRCPOLY : 0;
+	remainder = (remainder >> 1) ^ multiple;
+}
+
+The most significant coefficient of the remainder polynomial is stored
+in the least significant bit of the binary "remainder" variable.
+The other details of endianness have been hidden in CRCPOLY (which must
+be bit-reversed) and next_input_bit().
+
+As long as next_input_bit is returning the bits in a sensible order, we don't
+*have* to wait until the last possible moment to merge in additional bits.
+We can do it 8 bits at a time rather than 1 bit at a time:
+for (i = 0; i < input_bytes; i++) {
+	remainder ^= next_input_byte() << 24;
+	for (j = 0; j < 8; j++) {
+		multiple = (remainder & 0x80000000) ? CRCPOLY : 0;
+		remainder = (remainder << 1) ^ multiple;
+	}
+}
+
+Or in little-endian:
+for (i = 0; i < input_bytes; i++) {
+	remainder ^= next_input_byte();
+	for (j = 0; j < 8; j++) {
+		multiple = (remainder & 1) ? CRCPOLY : 0;
+		remainder = (remainder >> 1) ^ multiple;
+	}
+}
+
+If the input is a multiple of 32 bits, you can even XOR in a 32-bit
+word at a time and increase the inner loop count to 32.
+
+You can also mix and match the two loop styles, for example doing the
+bulk of a message byte-at-a-time and adding bit-at-a-time processing
+for any fractional bytes at the end.
+
+To reduce the number of conditional branches, software commonly uses
+the byte-at-a-time table method, popularized by Dilip V. Sarwate,
+"Computation of Cyclic Redundancy Checks via Table Look-Up", Comm. ACM
+v.31 no.8 (August 1998) p. 1008-1013.
+
+Here, rather than just shifting one bit of the remainder to decide
+in the correct multiple to subtract, we can shift a byte at a time.
+This produces a 40-bit (rather than a 33-bit) intermediate remainder,
+and the correct multiple of the polynomial to subtract is found using
+a 256-entry lookup table indexed by the high 8 bits.
+
+(The table entries are simply the CRC-32 of the given one-byte messages.)
+
+When space is more constrained, smaller tables can be used, e.g. two
+4-bit shifts followed by a lookup in a 16-entry table.
+
+It is not practical to process much more than 8 bits at a time using this
+technique, because tables larger than 256 entries use too much memory and,
+more importantly, too much of the L1 cache.
+
+To get higher software performance, a "slicing" technique can be used.
+See "High Octane CRC Generation with the Intel Slicing-by-8 Algorithm",
+ftp://download.intel.com/technology/comms/perfnet/download/slicing-by-8.pdf
+
+This does not change the number of table lookups, but does increase
+the parallelism.  With the classic Sarwate algorithm, each table lookup
+must be completed before the index of the next can be computed.
+
+A "slicing by 2" technique would shift the remainder 16 bits at a time,
+producing a 48-bit intermediate remainder.  Rather than doing a single
+lookup in a 65536-entry table, the two high bytes are looked up in
+two different 256-entry tables.  Each contains the remainder required
+to cancel out the corresponding byte.  The tables are different because the
+polynomials to cancel are different.  One has non-zero coefficients from
+x^32 to x^39, while the other goes from x^40 to x^47.
+
+Since modern processors can handle many parallel memory operations, this
+takes barely longer than a single table look-up and thus performs almost
+twice as fast as the basic Sarwate algorithm.
+
+This can be extended to "slicing by 4" using 4 256-entry tables.
+Each step, 32 bits of data is fetched, XORed with the CRC, and the result
+broken into bytes and looked up in the tables.  Because the 32-bit shift
+leaves the low-order bits of the intermediate remainder zero, the
+final CRC is simply the XOR of the 4 table look-ups.
+
+But this still enforces sequential execution: a second group of table
+look-ups cannot begin until the previous groups 4 table look-ups have all
+been completed.  Thus, the processor's load/store unit is sometimes idle.
+
+To make maximum use of the processor, "slicing by 8" performs 8 look-ups
+in parallel.  Each step, the 32-bit CRC is shifted 64 bits and XORed
+with 64 bits of input data.  What is important to note is that 4 of
+those 8 bytes are simply copies of the input data; they do not depend
+on the previous CRC at all.  Thus, those 4 table look-ups may commence
+immediately, without waiting for the previous loop iteration.
+
+By always having 4 loads in flight, a modern superscalar processor can
+be kept busy and make full use of its L1 cache.
+
+Two more details about CRC implementation in the real world:
+
+Normally, appending zero bits to a message which is already a multiple
+of a polynomial produces a larger multiple of that polynomial.  Thus,
+a basic CRC will not detect appended zero bits (or bytes).  To enable
+a CRC to detect this condition, it's common to invert the CRC before
+appending it.  This makes the remainder of the message+crc come out not
+as zero, but some fixed non-zero value.  (The CRC of the inversion
+pattern, 0xffffffff.)
+
+The same problem applies to zero bits prepended to the message, and a
+similar solution is used.  Instead of starting the CRC computation with
+a remainder of 0, an initial remainder of all ones is used.  As long as
+you start the same way on decoding, it doesn't make a difference.

Documentation/leds/leds-lp5521.txt

@@ -43,17 +43,23 @@ Format: 10x mA i.e 10 means 1.0 mA
 example platform data:
 
 Note: chan_nr can have values between 0 and 2.
+The name of each channel can be configurable.
+If the name field is not defined, the default name will be set to 'xxxx:channelN'
+(XXXX : pdata->label or i2c client name, N : channel number)
 
 static struct lp5521_led_config lp5521_led_config[] = {
         {
+		.name = "red",
                 .chan_nr        = 0,
                 .led_current    = 50,
 		.max_current    = 130,
         }, {
+		.name = "green",
                 .chan_nr        = 1,
                 .led_current    = 0,
 		.max_current    = 130,
         }, {
+		.name = "blue",
                 .chan_nr        = 2,
                 .led_current    = 0,
 		.max_current    = 130,
@@ -86,3 +92,60 @@ static struct lp5521_platform_data lp5521_platform_data = {
 
 If the current is set to 0 in the platform data, that channel is
 disabled and it is not visible in the sysfs.
+
+The 'update_config' : CONFIG register (ADDR 08h)
+This value is platform-specific data.
+If update_config is not defined, the CONFIG register is set with
+'LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT'.
+(Enable auto-powersave, set charge pump to auto, red to battery)
+
+example of update_config :
+
+#define LP5521_CONFIGS	(LP5521_PWM_HF | LP5521_PWRSAVE_EN | \
+			LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT | \
+			LP5521_CLK_INT)
+
+static struct lp5521_platform_data lp5521_pdata = {
+	.led_config = lp5521_led_config,
+	.num_channels = ARRAY_SIZE(lp5521_led_config),
+	.clock_mode = LP5521_CLOCK_INT,
+	.update_config = LP5521_CONFIGS,
+};
+
+LED patterns : LP5521 has autonomous operation without external control.
+Pattern data can be defined in the platform data.
+
+example of led pattern data :
+
+/* RGB(50,5,0) 500ms on, 500ms off, infinite loop */
+static u8 pattern_red[] = {
+		0x40, 0x32, 0x60, 0x00,	0x40, 0x00, 0x60, 0x00,
+		};
+
+static u8 pattern_green[] = {
+		0x40, 0x05, 0x60, 0x00, 0x40, 0x00, 0x60, 0x00,
+		};
+
+static struct lp5521_led_pattern board_led_patterns[] = {
+	{
+		.r = pattern_red,
+		.g = pattern_green,
+		.size_r = ARRAY_SIZE(pattern_red),
+		.size_g = ARRAY_SIZE(pattern_green),
+	},
+};
+
+static struct lp5521_platform_data lp5521_platform_data = {
+        .led_config     = lp5521_led_config,
+        .num_channels   = ARRAY_SIZE(lp5521_led_config),
+        .clock_mode     = LP5521_CLOCK_EXT,
+	.patterns = board_led_patterns,
+	.num_patterns = ARRAY_SIZE(board_led_patterns),
+};
+
+Then predefined led pattern(s) can be executed via the sysfs.
+To start the pattern #1,
+# echo 1 > /sys/bus/i2c/devices/xxxx/led_pattern
+(xxxx : i2c bus & slave address)
+To end the pattern,
+# echo 0 > /sys/bus/i2c/devices/xxxx/led_pattern