arm64: Build infrastructure

This patch adds Makefile and Kconfig files required for building an
AArch64 kernel.

Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Acked-by: Nicolas Pitre <[email protected]>
Acked-by: Olof Johansson <[email protected]>
Acked-by: Santosh Shilimkar <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>

arch/arm64/Kconfig

@@ -0,0 +1,222 @@
+config ARM64
+	def_bool y
+	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_HARDIRQS_NO_DEPRECATED
+	select GENERIC_IOMAP
+	select GENERIC_IRQ_PROBE
+	select GENERIC_IRQ_SHOW
+	select GENERIC_SMP_IDLE_THREAD
+	select GENERIC_TIME_VSYSCALL
+	select HARDIRQS_SW_RESEND
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_DMA_API_DEBUG
+	select HAVE_DMA_ATTRS
+	select HAVE_GENERIC_DMA_COHERENT
+	select HAVE_GENERIC_HARDIRQS
+	select HAVE_HW_BREAKPOINT if PERF_EVENTS
+	select HAVE_IRQ_WORK
+	select HAVE_MEMBLOCK
+	select HAVE_PERF_EVENTS
+	select HAVE_SPARSE_IRQ
+	select IRQ_DOMAIN
+	select NO_BOOTMEM
+	select OF
+	select OF_EARLY_FLATTREE
+	select PERF_USE_VMALLOC
+	select RTC_LIB
+	select SPARSE_IRQ
+	help
+	  ARM 64-bit (AArch64) Linux support.
+
+config 64BIT
+	def_bool y
+
+config ARCH_PHYS_ADDR_T_64BIT
+	def_bool y
+
+config MMU
+	def_bool y
+
+config NO_IOPORT
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
+
+config GENERIC_LOCKBREAK
+	def_bool y
+	depends on SMP && PREEMPT
+
+config RWSEM_GENERIC_SPINLOCK
+	def_bool y
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config GENERIC_CSUM
+        def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+	def_bool y
+
+config ZONE_DMA32
+	def_bool y
+
+config ARCH_DMA_ADDR_T_64BIT
+	def_bool y
+
+config NEED_DMA_MAP_STATE
+	def_bool y
+
+config NEED_SG_DMA_LENGTH
+	def_bool y
+
+config SWIOTLB
+	def_bool y
+
+config IOMMU_HELPER
+	def_bool SWIOTLB
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+menu "System Type"
+
+endmenu
+
+menu "Bus support"
+
+config ARM_AMBA
+	bool
+
+endmenu
+
+menu "Kernel Features"
+
+source "kernel/time/Kconfig"
+
+config ARM64_64K_PAGES
+	bool "Enable 64KB pages support"
+	help
+	  This feature enables 64KB pages support (4KB by default)
+	  allowing only two levels of page tables and faster TLB
+	  look-up. AArch32 emulation is not available when this feature
+	  is enabled.
+
+config SMP
+	bool "Symmetric Multi-Processing"
+	select USE_GENERIC_SMP_HELPERS
+	help
+	  This enables support for systems with more than one CPU.  If
+	  you say N here, the kernel will run on single and
+	  multiprocessor machines, but will use only one CPU of a
+	  multiprocessor machine. If you say Y here, the kernel will run
+	  on many, but not all, single processor machines. On a single
+	  processor machine, the kernel will run faster if you say N
+	  here.
+
+	  If you don't know what to do here, say N.
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-32)"
+	range 2 32
+	depends on SMP
+	default "4"
+
+source kernel/Kconfig.preempt
+
+config HZ
+	int
+	default 100
+
+config ARCH_HAS_HOLES_MEMORYMODEL
+	def_bool y if SPARSEMEM
+
+config ARCH_SPARSEMEM_ENABLE
+	def_bool y
+	select SPARSEMEM_VMEMMAP_ENABLE
+
+config ARCH_SPARSEMEM_DEFAULT
+	def_bool ARCH_SPARSEMEM_ENABLE
+
+config ARCH_SELECT_MEMORY_MODEL
+	def_bool ARCH_SPARSEMEM_ENABLE
+
+config HAVE_ARCH_PFN_VALID
+	def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
+
+config HW_PERF_EVENTS
+	bool "Enable hardware performance counter support for perf events"
+	depends on PERF_EVENTS
+	default y
+	help
+	  Enable hardware performance counter support for perf events. If
+	  disabled, perf events will use software events only.
+
+source "mm/Kconfig"
+
+endmenu
+
+menu "Boot options"
+
+config CMDLINE
+	string "Default kernel command string"
+	default ""
+	help
+	  Provide a set of default command-line options at build time by
+	  entering them here. As a minimum, you should specify the the
+	  root device (e.g. root=/dev/nfs).
+
+config CMDLINE_FORCE
+	bool "Always use the default kernel command string"
+	help
+	  Always use the default kernel command string, even if the boot
+	  loader passes other arguments to the kernel.
+	  This is useful if you cannot or don't want to change the
+	  command-line options your boot loader passes to the kernel.
+
+endmenu
+
+menu "Userspace binary formats"
+
+source "fs/Kconfig.binfmt"
+
+config COMPAT
+	bool "Kernel support for 32-bit EL0"
+	depends on !ARM64_64K_PAGES
+	select COMPAT_BINFMT_ELF
+	help
+	  This option enables support for a 32-bit EL0 running under a 64-bit
+	  kernel at EL1. AArch32-specific components such as system calls,
+	  the user helper functions, VFP support and the ptrace interface are
+	  handled appropriately by the kernel.
+
+	  If you want to execute 32-bit userspace applications, say Y.
+
+config SYSVIPC_COMPAT
+	def_bool y
+	depends on COMPAT && SYSVIPC
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/arm64/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"

arch/arm64/Kconfig.debug

@@ -0,0 +1,27 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config FRAME_POINTER
+	bool
+	default y
+
+config DEBUG_ERRORS
+	bool "Verbose kernel error messages"
+	depends on DEBUG_KERNEL
+	help
+	  This option controls verbose debugging information which can be
+	  printed when the kernel detects an internal error. This debugging
+	  information is useful to kernel hackers when tracking down problems,
+	  but mostly meaningless to other people. It's safe to say Y unless
+	  you are concerned with the code size or don't want to see these
+	  messages.
+
+config DEBUG_STACK_USAGE
+	bool "Enable stack utilization instrumentation"
+	depends on DEBUG_KERNEL
+	help
+	  Enables the display of the minimum amount of free stack which each
+	  task has ever had available in the sysrq-T output.
+
+endmenu

arch/arm64/Makefile

@@ -0,0 +1,71 @@
+#
+# arch/arm64/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995-2001 by Russell King
+
+LDFLAGS_vmlinux	:=-p --no-undefined -X
+CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
+OBJCOPYFLAGS	:=-O binary -R .note -R .note.gnu.build-id -R .comment -S
+GZFLAGS		:=-9
+
+LIBGCC 		:= $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
+
+KBUILD_DEFCONFIG := defconfig
+
+KBUILD_CFLAGS	+= -mgeneral-regs-only
+KBUILD_CPPFLAGS	+= -mlittle-endian
+AS		+= -EL
+LD		+= -EL
+
+comma = ,
+
+CHECKFLAGS	+= -D__aarch64__
+
+# Default value
+head-y		:= arch/arm64/kernel/head.o
+
+# The byte offset of the kernel image in RAM from the start of RAM.
+TEXT_OFFSET := 0x00080000
+
+export	TEXT_OFFSET GZFLAGS
+
+core-y		+= arch/arm64/kernel/ arch/arm64/mm/
+libs-y		:= arch/arm64/lib/ $(libs-y)
+libs-y		+= $(LIBGCC)
+
+# Default target when executing plain make
+KBUILD_IMAGE := Image.gz
+
+all:	$(KBUILD_IMAGE)
+
+boot := arch/arm64/boot
+
+Image Image.gz: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+
+zinstall install: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
+
+%.dtb:
+	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+
+# We use MRPROPER_FILES and CLEAN_FILES now
+archclean:
+	$(Q)$(MAKE) $(clean)=$(boot)
+
+define archhelp
+  echo  '* Image.gz      - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
+  echo  '  Image         - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
+  echo  '  install       - Install uncompressed kernel'
+  echo  '  zinstall      - Install compressed kernel'
+  echo  '                  Install using (your) ~/bin/installkernel or'
+  echo  '                  (distribution) /sbin/installkernel or'
+  echo  '                  install to $$(INSTALL_PATH) and run lilo'
+endef

arch/arm64/boot/.gitignore

@@ -0,0 +1,2 @@
+Image
+Image.gz

arch/arm64/boot/Makefile

@@ -0,0 +1,36 @@
+#
+# arch/arm64/boot/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2012, ARM Ltd.
+# Author: Will Deacon <[email protected]>
+#
+# Based on the ia64 boot/Makefile.
+#
+
+targets := Image Image.gz
+
+$(obj)/Image: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/Image.gz: $(obj)/Image FORCE
+	$(call if_changed,gzip)
+
+$(obj)/%.dtb: $(src)/dts/%.dts
+	$(call cmd,dtc)
+
+install: $(obj)/Image
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(obj)/Image System.map "$(INSTALL_PATH)"
+
+zinstall: $(obj)/Image.gz
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(obj)/Image.gz System.map "$(INSTALL_PATH)"
+
+clean-files += *.dtb