Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/…

…djbw/async_tx

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (66 commits)
  avr32: at32ap700x: fix typo in DMA master configuration
  dmaengine/dmatest: Pass timeout via module params
  dma: let IMX_DMA depend on IMX_HAVE_DMA_V1 instead of an explicit list of SoCs
  fsldma: make halt behave nicely on all supported controllers
  fsldma: reduce locking during descriptor cleanup
  fsldma: support async_tx dependencies and automatic unmapping
  fsldma: fix controller lockups
  fsldma: minor codingstyle and consistency fixes
  fsldma: improve link descriptor debugging
  fsldma: use channel name in printk output
  fsldma: move related helper functions near each other
  dmatest: fix automatic buffer unmap type
  drivers, pch_dma: Fix warning when CONFIG_PM=n.
  dmaengine/dw_dmac fix: use readl & writel instead of __raw_readl & __raw_writel
  avr32: at32ap700x: Specify DMA Flow Controller, Src and Dst msize
  dw_dmac: Setting Default Burst length for transfers as 16.
  dw_dmac: Allow src/dst msize & flow controller to be configured at runtime
  dw_dmac: Changing type of src_master and dest_master to u8.
  dw_dmac: Pass Channel Priority from platform_data
  dw_dmac: Pass Channel Allocation Order from platform_data
  ...

arch/arm/mach-mxs/include/mach/dma.h

@@ -0,0 +1,26 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_MXS_DMA_H__
+#define __MACH_MXS_DMA_H__
+
+struct mxs_dma_data {
+	int chan_irq;
+};
+
+static inline int mxs_dma_is_apbh(struct dma_chan *chan)
+{
+	return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbh");
+}
+
+static inline int mxs_dma_is_apbx(struct dma_chan *chan)
+{
+	return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbx");
+}
+
+#endif /* __MACH_MXS_DMA_H__ */

arch/arm/plat-nomadik/include/plat/ste_dma40.h

@@ -104,6 +104,8 @@ struct stedma40_half_channel_info {
  *
  * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH
  * @high_priority: true if high-priority
+ * @realtime: true if realtime mode is to be enabled.  Only available on DMA40
+ * version 3+, i.e DB8500v2+
  * @mode: channel mode: physical, logical, or operation
  * @mode_opt: options for the chosen channel mode
  * @src_dev_type: Src device type
@@ -119,6 +121,7 @@ struct stedma40_half_channel_info {
 struct stedma40_chan_cfg {
 	enum stedma40_xfer_dir			 dir;
 	bool					 high_priority;
+	bool					 realtime;
 	enum stedma40_mode			 mode;
 	enum stedma40_mode_opt			 mode_opt;
 	int					 src_dev_type;
@@ -168,25 +171,6 @@ struct stedma40_platform_data {
 
 bool stedma40_filter(struct dma_chan *chan, void *data);
 
-/**
- * stedma40_memcpy_sg() - extension of the dma framework, memcpy to/from
- * scattergatter lists.
- *
- * @chan: dmaengine handle
- * @sgl_dst: Destination scatter list
- * @sgl_src: Source scatter list
- * @sgl_len: The length of each scatterlist. Both lists must be of equal length
- * and each element must match the corresponding element in the other scatter
- * list.
- * @flags: is actually enum dma_ctrl_flags. See dmaengine.h
- */
-
-struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan,
-						   struct scatterlist *sgl_dst,
-						   struct scatterlist *sgl_src,
-						   unsigned int sgl_len,
-						   unsigned long flags);
-
 /**
  * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave
  * (=device)

arch/avr32/mach-at32ap/at32ap700x.c

@@ -2048,6 +2048,11 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data,
 		rx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT;
 		rx_dws->cfg_hi = DWC_CFGH_SRC_PER(3);
 		rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
+		rx_dws->src_master = 0;
+		rx_dws->dst_master = 1;
+		rx_dws->src_msize = DW_DMA_MSIZE_1;
+		rx_dws->dst_msize = DW_DMA_MSIZE_1;
+		rx_dws->fc = DW_DMA_FC_D_P2M;
 	}
 
 	/* Check if DMA slave interface for playback should be configured. */
@@ -2056,6 +2061,11 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data,
 		tx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT;
 		tx_dws->cfg_hi = DWC_CFGH_DST_PER(4);
 		tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
+		tx_dws->src_master = 0;
+		tx_dws->dst_master = 1;
+		tx_dws->src_msize = DW_DMA_MSIZE_1;
+		tx_dws->dst_msize = DW_DMA_MSIZE_1;
+		tx_dws->fc = DW_DMA_FC_D_M2P;
 	}
 
 	if (platform_device_add_data(pdev, data,
@@ -2128,6 +2138,11 @@ at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data)
 	dws->reg_width = DW_DMA_SLAVE_WIDTH_32BIT;
 	dws->cfg_hi = DWC_CFGH_DST_PER(2);
 	dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
+	dws->src_master = 0;
+	dws->dst_master = 1;
+	dws->src_msize = DW_DMA_MSIZE_1;
+	dws->dst_msize = DW_DMA_MSIZE_1;
+	dws->fc = DW_DMA_FC_D_M2P;
 
 	if (platform_device_add_data(pdev, data,
 				sizeof(struct atmel_abdac_pdata)))

drivers/dma/Kconfig

@@ -82,7 +82,7 @@ config INTEL_IOP_ADMA
 
 config DW_DMAC
 	tristate "Synopsys DesignWare AHB DMA support"
-	depends on AVR32
+	depends on HAVE_CLK
 	select DMA_ENGINE
 	default y if CPU_AT32AP7000
 	help
@@ -221,12 +221,20 @@ config IMX_SDMA
 
 config IMX_DMA
 	tristate "i.MX DMA support"
-	depends on ARCH_MX1 || ARCH_MX21 || MACH_MX27
+	depends on IMX_HAVE_DMA_V1
 	select DMA_ENGINE
 	help
 	  Support the i.MX DMA engine. This engine is integrated into
 	  Freescale i.MX1/21/27 chips.
 
+config MXS_DMA
+	bool "MXS DMA support"
+	depends on SOC_IMX23 || SOC_IMX28
+	select DMA_ENGINE
+	help
+	  Support the MXS DMA engine. This engine including APBH-DMA
+	  and APBX-DMA is integrated into Freescale i.MX23/28 chips.
+
 config DMA_ENGINE
 	bool
 

drivers/dma/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o
 obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += ppc4xx/
 obj-$(CONFIG_IMX_SDMA) += imx-sdma.o
 obj-$(CONFIG_IMX_DMA) += imx-dma.o
+obj-$(CONFIG_MXS_DMA) += mxs-dma.o
 obj-$(CONFIG_TIMB_DMA) += timb_dma.o
 obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
 obj-$(CONFIG_PL330_DMA) += pl330.o

drivers/dma/dmatest.c

@@ -54,6 +54,11 @@ module_param(pq_sources, uint, S_IRUGO);
 MODULE_PARM_DESC(pq_sources,
 		"Number of p+q source buffers (default: 3)");
 
+static int timeout = 3000;
+module_param(timeout, uint, S_IRUGO);
+MODULE_PARM_DESC(timeout, "Transfer Timeout in msec (default: 3000), \
+		Pass -1 for infinite timeout");
+
 /*
  * Initialization patterns. All bytes in the source buffer has bit 7
  * set, all bytes in the destination buffer has bit 7 cleared.
@@ -285,7 +290,12 @@ static int dmatest_func(void *data)
 
 	set_user_nice(current, 10);
 
-	flags = DMA_CTRL_ACK | DMA_COMPL_SKIP_DEST_UNMAP | DMA_PREP_INTERRUPT;
+	/*
+	 * src buffers are freed by the DMAEngine code with dma_unmap_single()
+	 * dst buffers are freed by ourselves below
+	 */
+	flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT
+	      | DMA_COMPL_SKIP_DEST_UNMAP | DMA_COMPL_SRC_UNMAP_SINGLE;
 
 	while (!kthread_should_stop()
 	       && !(iterations && total_tests >= iterations)) {
@@ -294,7 +304,7 @@ static int dmatest_func(void *data)
 		dma_addr_t dma_srcs[src_cnt];
 		dma_addr_t dma_dsts[dst_cnt];
 		struct completion cmp;
-		unsigned long tmo = msecs_to_jiffies(3000);
+		unsigned long tmo = msecs_to_jiffies(timeout);
 		u8 align = 0;
 
 		total_tests++;