davinci: fb: Frame Buffer driver for TI DA8xx/OMAP-L1xx

Add LCD controller (LCDC) driver for TI's DA8xx/OMAP-L1xx architecture.
LCDC specifications can be found at http://www.ti.com/litv/pdf/sprufm0a.

LCDC on DA8xx consists of two independent controllers, the Raster
Controller and the LCD Interface Display Driver (LIDD) controller.  LIDD
further supports character and graphic displays.

This patch adds support for the graphic display (Sharp LQ035Q3DG01) found
on the DA830 based EVM.  The EVM details can be found at:
http://support.spectrumdigital.com/boards/dskda830/revc/.

Signed-off-by: Sudhakar Rajashekhara <[email protected]>
Signed-off-by: Pavel Kiryukhin <[email protected]>
Signed-off-by: Steve Chen <[email protected]>
Acked-by: Krzysztof Helt <[email protected]>
DESC
davinci-fb-frame-buffer-driver-for-ti-da8xx-omap-l1xx-fix
EDESC
From: Andrew Morton <[email protected]>

fix kconfig indenting

Cc: Krzysztof Helt <[email protected]>
Cc: Pavel Kiryukhin <[email protected]>
Cc: Steve Chen <[email protected]>
Cc: Sudhakar Rajashekhara <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

drivers/video/Kconfig

@@ -2041,6 +2041,17 @@ config FB_SH7760
 	  and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
 	  panels <= 320 pixel horizontal resolution.
 
+config FB_DA8XX
+	tristate "DA8xx/OMAP-L1xx Framebuffer support"
+	depends on FB && ARCH_DAVINCI_DA8XX
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  This is the frame buffer device driver for the TI LCD controller
+	  found on DA8xx/OMAP-L1xx SoCs.
+	  If unsure, say N.
+
 config FB_VIRTUAL
 	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
 	depends on FB

drivers/video/Makefile

@@ -137,6 +137,7 @@ obj-$(CONFIG_FB_OF)               += offb.o
 obj-$(CONFIG_FB_BF54X_LQ043)	  += bf54x-lq043fb.o
 obj-$(CONFIG_FB_BFIN_T350MCQB)	  += bfin-t350mcqb-fb.o
 obj-$(CONFIG_FB_MX3)		  += mx3fb.o
+obj-$(CONFIG_FB_DA8XX)		  += da8xx-fb.o
 
 # the test framebuffer is last
 obj-$(CONFIG_FB_VIRTUAL)          += vfb.o