Documentation: leds-lp5523: describe master fader attributes

Add the usage of the new attributes for master faders. Signed-off-by: Toshi Kikuchi <[email protected]> Acked-by: Milo Kim <[email protected]> Acked-by: Jacek Anaszewski <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
fuzeman · May 25, 2015 · 7ff6b23 · 7ff6b23
1 parent 52da81e
commit 7ff6b23
Showing 1 changed file with 30 additions and 0 deletions.
diff --git a/Documentation/leds/leds-lp5523.txt b/Documentation/leds/leds-lp5523.txt
@@ -49,6 +49,36 @@ There are two ways to run LED patterns.
 2) Firmware interface - LP55xx common interface
   For the details, please refer to 'firmware' section in leds-lp55xx.txt
 
+LP5523 has three master faders. If a channel is mapped to one of
+the master faders, its output is dimmed based on the value of the master
+fader.
+
+For example,
+
+  echo "123000123" > master_fader_leds
+
+creates the following channel-fader mappings:
+
+  channel 0,6 to master_fader1
+  channel 1,7 to master_fader2
+  channel 2,8 to master_fader3
+
+Then, to have 25% of the original output on channel 0,6:
+
+  echo 64 > master_fader1
+
+To have 0% of the original output (i.e. no output) channel 1,7:
+
+  echo 0 > master_fader2
+
+To have 100% of the original output (i.e. no dimming) on channel 2,8:
+
+  echo 255 > master_fader3
+
+To clear all master fader controls:
+
+  echo "000000000" > master_fader_leds
+
 Selftest uses always the current from the platform data.
 
 Each channel contains led current settings.