-
Assemble your RC2014
-
Enter the Nix shell with
nix-shell https://github.com/fricklerhandwerk/rc2014/tarball/master --run $SHELL
This will take a while, add
-v
to observe what happens.Alternatively, clone this repository, set up
direnv
and callgit clone https://github.com/fricklerhandwerk cd rc2014 direnv allow
Plug in the FTDI (serial adapter) into your USB port and /dev/ttyACM0
should appear.
Power off the RC2014. Then connect to the serial port:
$ sudo tio /dev/ttyACM0
[20:27:46.419] tio v2.5
[20:27:46.419] Press ctrl-t q to quit
[20:27:46.420] Connected
Power on the RC2014, and press the reset button.
It will boot from the ROM as set by the page selection jumpers.
Follow the instructions on the terminal to do things.
Connect a XGecu Pro TL866II plus to your USB port and run xgpro
to start the Wine application.
- Press
Select IC
(top left), a window opens. - Select
ATMEL
in the center column. - Select
AT28C64B
in the right column.
In the button bar at the top:
- Press
READ
to read ROM contents. - Press
LOAD
to load a ROM file. - Press
PROG.
to write the loaded file to the ROM.