Sync up with Linus #101
Merged
Sync up with Linus #101
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
After commit 0f825ee ("f2fs: add new interfaces for extent tree"), f2fs_init_extent_tree becomes the only caller of __insert_extent_tree, and in f2fs_init_extent_tree, we will only insert extent node in an empty tree, so __try_{back,front}_merge in __insert_extent_tree will never be called. This patch removes these dead codes, besides, rename __insert_extent_tree to __init_extent_tree for readability. Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
This patch splits __insert_extent_tree_ret into __try_merge_extent_node & __insert_extent_tree for code readability. Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
In __lookup_extent_tree_ret we will not try to find neighbor nodes if we find the target node, in this condition, we will lost the chance to merge the new mapping with exist extent node later. So our extent cache of inode will be fragmented after overwrite exist file, we can see the number of extent node increases intensively in following test case: dd if=/dev/zero of=/mnt/f2fs/4m bs=4K count=1024 Extent Cache: - Hit Count: L1-1:0 L1-2:0 L2:0 - Hit Ratio: 0% (0 / 3072) - Inner Struct Count: tree: 1, node: 1 dd if=/dev/zero of=/mnt/f2fs/4m bs=4K count=1024 conv=notrunc Extent Cache: - Hit Count: L1-1:2048 L1-2:0 L2:0 - Hit Ratio: 33% (2048 / 6144) - Inner Struct Count: tree: 1, node: 961 This patch fixes to lookup neighbors of target node for further merging. Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
When I merged the OPAL support for the powernv LEDS driver I missed a hunk. This is slightly modified from the original patch, as the original added code to opal-api.h which is not in the skiboot version, which is discouraged. Instead those values are moved into the driver, which is the only place they are used. Fixes: 8a8d918 ("powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states") Reviewed-by: Vasant Hegde <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
Macro DEFINE_PCI_DEVICE_TABLE is deprecated. So, here use struct pci_device_id instead of DEFINE_PCI_DEVICE_TABLE with the goal of getting rid of this macro completely. The Coccinelle semantic patch that performs this transformation is as follows: @@ identifier a; declarer name DEFINE_PCI_DEVICE_TABLE; initializer i; @@ - DEFINE_PCI_DEVICE_TABLE(a) + const struct pci_device_id a[] = i; Signed-off-by: Vaishali Thakkar <[email protected]> Acked-by: Michael Neuling <[email protected]> Acked-by: Ian Munsie <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
…tching The pfc in the R8A7790 (and probably others in the R-Car gen 2 family) supports switching SDHI signals between 3.3V and 1.8V nominal voltage, and the SD driver should do that when switching to and from UHS modes. Add a flag for pins that have configurable I/O voltage and SoC operations to get and set the nominal voltage. Implement the pinconf power-source parameter using these operations. Signed-off-by: Ben Hutchings <[email protected]> Acked-by: Laurent Pinchart <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
Architecture specific code for i386 and x86_64 was unified and merged to the arch/x86. This patch fix old path of x86 architecture in a comment from the arch/arm64/include/asm/fixmap.h. Signed-off-by: Alexander Kuleshov <[email protected]> Signed-off-by: Will Deacon <[email protected]>
When parsing the memory nodes to populate the memblock memory table, we check against high and low limits and clip any memory that exceeds either one of them. However, for arm64, the high limit of (phys_addr_t)~0 is not very meaningful, since phys_addr_t is 64 bits (i.e., no limit) but there may be other constraints that limit the memory ranges that we can support. So rename MAX_PHYS_ADDR to MAX_MEMBLOCK_ADDR (for clarity) and only define it if the arch does not supply a definition of its own. Acked-by: Rob Herring <[email protected]> Reviewed-by: Catalin Marinas <[email protected]> Tested-by: Stuart Yoder <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Will Deacon <[email protected]>
The linear region size of a 39-bit VA kernel is only 256 GB, which may be insufficient to cover all of system RAM, even on platforms that have much less than 256 GB of memory but which is laid out very sparsely. So make sure we clip the memory we will not be able to map before installing it into the memblock memory table, by setting MAX_MEMBLOCK_ADDR accordingly. Reviewed-by: Catalin Marinas <[email protected]> Tested-by: Stuart Yoder <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Will Deacon <[email protected]>
Commit 4b3dc96 ("arm64: force CONFIG_SMP=y and remove redundant #ifdefs") incorrectly resolved a conflict on arch/arm64/kernel/Makefile which resulted in a partial revert of 52da443 ("arm64: perf: factor out callchain code"), leading to perf_callchain.o depending on CONFIG_HW_PERF_EVENTS instead of CONFIG_PERF_EVENTS. This patch restores the kconfig dependency for perf_callchain.o. Reported-by: Mark Rutland <[email protected]> Signed-off-by: Will Deacon <[email protected]>
__GFP_NOFAIL can avoid retrying the whole path of kmem_cache_alloc and bio_alloc. And, it also fixes the use cases of GFP_ATOMIC correctly. Suggested-by: Chao Yu <[email protected]> Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
If we release the lock in list_for_each_entry_safe, we can lose the tmp pointer by alloc_nid. Signed-off-by: Jaegeuk Kim <[email protected]>
According to commit 5f16f32 ("ext4: atomically set inode->i_flags in ext4_set_inode_flags()"). Signed-off-by: Zhang Zhen <[email protected]> Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
When converting inline dentry, we will zero out target dentry page before duplicating data of inline dentry into target page, it become overhead since inline dentry size is not small. So this patch tries to remove unneeded initializing in the space of target dentry page. Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
This patch fixes to return error number of f2fs_truncate, so that we can handle the error correctly in callers. Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
In following call stack, if unfortunately we lose all chances to truncate
inode page in remove_inode_page, eventually we will add the nid allocated
previously into free nid cache, this nid is with NID_NEW status and with
NEW_ADDR in its blkaddr pointer:
- f2fs_create
- f2fs_add_link
- __f2fs_add_link
- init_inode_metadata
- new_inode_page
- new_node_page
- set_node_addr(, NEW_ADDR)
- f2fs_init_acl failed
- remove_inode_page failed
- handle_failed_inode
- remove_inode_page failed
- iput
- f2fs_evict_inode
- remove_inode_page failed
- alloc_nid_failed cache a nid with valid blkaddr: NEW_ADDR
This may not only cause resource leak of previous inode, but also may cause
incorrect use of the previous blkaddr which is located in NO.nid node entry
when this nid is reused by others.
This patch tries to add this inode to orphan list if we fail to truncate
inode, so that we can obtain a second chance to release it in orphan
recovery flow.
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
The user assembly for byte and word accesses was virtually identical. Rather than duplicating this, use a macro instead. Acked-by: Will Deacon <[email protected]> Signed-off-by: Russell King <[email protected]>
There's no need for this macro, it can use a default for the condition argument. Acked-by: Will Deacon <[email protected]> Signed-off-by: Russell King <[email protected]>
Make the "fast" syscall return path fast again. The addition of IRQ tracing and context tracking has made this path grossly inefficient. We can do much better if these options are enabled if we save the syscall return code on the stack - we then don't need to save a bunch of registers around every single callout to C code. Acked-by: Will Deacon <[email protected]> Signed-off-by: Russell King <[email protected]>
…xit() The audit code looks like it's been written to cope with being called with IRQs enabled. However, it's unclear whether IRQs should be enabled or disabled when calling the syscall tracing infrastructure. Right now, sometimes we call this with IRQs enabled, and other times with IRQs disabled. Opt for IRQs being enabled for consistency. Acked-by: Will Deacon <[email protected]> Signed-off-by: Russell King <[email protected]>
Group names should be smc0_nand_grp and smc0_nor_grp, otherwise you'll get errors like this if you try to pinmux them via the devicetree: zynq-pinctrl 700.pinctrl: invalid group "smc0_nand_grp" for function "smc0_nand" Probably a typo while creating these tables. Signed-off-by: Mike Looijmans <[email protected]> Acked-by: Sören Brinkmann <[email protected]> Acked-by: Moritz Fischer <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
Remove unneeded variable used to store return value. Generated by: scripts/coccinelle/misc/returnvar.cocci Signed-off-by: Fengguang Wu <[email protected]> Signed-off-by: Julia Lawall <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
platform_driver does not need to set an owner as it will be populated by the driver core. The semantic patch that makes this change is available in scripts/coccinelle/api/platform_no_drv_owner.cocci. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
Improve the do_ldrd_abort macro code - firstly, it inefficiently checks for the LDRD encoding by doing a multi-stage test of various bits. This can be simplified by generating a mask, bitmasking the instruction and then comparing the result. Secondly, we want to be able to test the result rather than branching to do_DataAbort, so remove the branch at the end and rename the macro to 'teq_ldrd' to reflect it's new usage. teq_ldrd macro returns 'eq' if the instruction was a LDRD. Signed-off-by: Russell King <[email protected]>
Provide uaccess_save_and_enable() and uaccess_restore() to permit control of userspace visibility to the kernel, and hook these into the appropriate places in the kernel where we need to access userspace. Signed-off-by: Russell King <[email protected]>
The only caller of cpu_die() on ARM is arch_cpu_idle_dead(), so let's simplify the code by renaming cpu_die() to arch_cpu_idle_dead(). While were here, drop the __ref annotation because __cpuinit is gone nowadays. Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: Russell King <[email protected]>
For a userland lock request, the previous and current lock modes are used to decide when the lvb should be copied back to the user. The wrong previous value was used, so that it always matched the current value. This caused the lvb to be copied back to the user in the wrong cases. Signed-off-by: David Teigland <[email protected]>
The Intel Baytrail pinctrl driver implements irqchip callbacks which are called with desc->lock raw_spinlock held. In mainline this is fine because spinlock resolves to raw_spinlock. However, running the same code in -rt we get: BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917 in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/0 Preemption disabled at:[<ffffffff81092e9f>] cpu_startup_entry+0x17f/0x480 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.1.5-rt5 #13 ... Call Trace: <IRQ> [<ffffffff816283c6>] dump_stack+0x4a/0x61 [<ffffffff81077e17>] ___might_sleep+0xe7/0x170 [<ffffffff8162d6cf>] rt_spin_lock+0x1f/0x50 [<ffffffff812e3b88>] byt_gpio_clear_triggering+0x38/0x60 [<ffffffff812e3bc1>] byt_irq_mask+0x11/0x20 [<ffffffff810a7013>] handle_level_irq+0x83/0x150 [<ffffffff810a3457>] generic_handle_irq+0x27/0x40 [<ffffffff812e3a5f>] byt_gpio_irq_handler+0x7f/0xc0 [<ffffffff810050aa>] handle_irq+0xaa/0x190 ... This is because in -rt spinlocks are preemptible so taking the driver private spinlock in irqchip callbacks causes might_sleep() to trigger. In order to keep -rt happy but at the same time make sure that register accesses get serialized, convert the driver to use raw_spinlock instead. Also shorten the critical section a bit in few places. Suggested-by: Linus Walleij <[email protected]> Signed-off-by: Mika Westerberg <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
When running -rt kernel and an interrupt happens on a GPIO line controlled by Intel Cherryview/Braswell pinctrl driver we get: BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917 in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/0 Preemption disabled at:[<ffffffff81092e9f>] cpu_startup_entry+0x17f/0x480 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.1.5-rt5 #16 ... Call Trace: <IRQ> [<ffffffff816283c6>] dump_stack+0x4a/0x61 [<ffffffff81077e17>] ___might_sleep+0xe7/0x170 [<ffffffff8162d6cf>] rt_spin_lock+0x1f/0x50 [<ffffffff812e52ed>] chv_gpio_irq_ack+0x3d/0xa0 [<ffffffff810a72f5>] handle_edge_irq+0x75/0x180 [<ffffffff810a3457>] generic_handle_irq+0x27/0x40 [<ffffffff812e57de>] chv_gpio_irq_handler+0x7e/0x110 [<ffffffff810050aa>] handle_irq+0xaa/0x190 ... This is because desc->lock is raw_spinlock and is held when chv_gpio_irq_ack() is called by the genirq core. chv_gpio_irq_ack() in turn takes pctrl->lock which in -rt is an rt-mutex causing might_sleep() rightfully to complain about sleeping function called from invalid context. In order to keep -rt happy but at the same time make sure that register accesses get serialized, convert the driver to use raw_spinlock instead. Suggested-by: Linus Walleij <[email protected]> Signed-off-by: Mika Westerberg <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
Add missed description for GPIO irqchip fields in struct gpio_chip. Signed-off-by: Grygorii Strashko <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
Update the pxa2xx socket driver to use the devm_clk_get() API so that the cleanup paths are simplified. Reviewed-by: Robert Jarzmik <[email protected]> Signed-off-by: Russell King <[email protected]>
Convert the pxa2xx socket driver memory allocation to use devm_kzalloc() to simplify the cleanup path. Reviewed-by: Robert Jarzmik <[email protected]> Signed-off-by: Russell King <[email protected]>
Update the pxa2xx socket driver to use the devm_clk_get() API so that the cleanup paths are simplified. Signed-off-by: Russell King <[email protected]>
clk_get(dev, NULL) will always refer to the same clock, so it's pointless calling this multiple times for the same device. As we no longer have to worry about the cleanup (via use of devm_clk_get()) we can simplify sa1111_pcmcia_add() too. Signed-off-by: Russell King <[email protected]>
A library module is not required to have module init/exit functions. Get rid of these unnecessary functions. Signed-off-by: Russell King <[email protected]>
We no longer need to store the clk pointer in struct skt_dev_info as we no longer need to remember the clk pointer for the cleanup paths. Reviewed-by: Robert Jarzmik <[email protected]> Signed-off-by: Russell King <[email protected]>
When the OS/2 driver hits a disk write error, it writes the sector to another location and adds the sector mapping to the hotfix map. This patch makes the hpfs driver understand the hotfix map and remap accesses accoring to it. Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Update ctime and mtime when a directory is modified. (though OS/2 doesn't update them anyway) Signed-off-by: Mikulas Patocka <[email protected]> Cc: [email protected] # v3.3+ Signed-off-by: Linus Torvalds <[email protected]>
Merge hpfs upddate from Mikulas Patocka. * emailed patches from Mikulas Patocka <[email protected]>: hpfs: update ctime and mtime on directory modification hpfs: support hotfixes
…/git/jack/linux-fs Pull ext3 removal, quota & udf fixes from Jan Kara: "The biggest change in the pull is the removal of ext3 filesystem driver (~28k lines removed). Ext4 driver is a full featured replacement these days and both RH and SUSE use it for several years without issues. Also there are some workarounds in VM & block layer mainly for ext3 which we could eventually get rid of. Other larger change is addition of proper error handling for dquot_initialize(). The rest is small fixes and cleanups" [ I wasn't convinced about the ext3 removal and worried about things falling through the cracks for legacy users, but ext4 maintainers piped up and were all unanimously in favor of removal, and maintaining all legacy ext3 support inside ext4. - Linus ] * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Don't modify filesystem for read-only mounts quota: remove an unneeded condition ext4: memory leak on error in ext4_symlink() mm/Kconfig: NEED_BOUNCE_POOL: clean-up condition ext4: Improve ext4 Kconfig test block: Remove forced page bouncing under IO fs: Remove ext3 filesystem driver doc: Update doc about journalling layer jfs: Handle error from dquot_initialize() reiserfs: Handle error from dquot_initialize() ocfs2: Handle error from dquot_initialize() ext4: Handle error from dquot_initialize() ext2: Handle error from dquot_initalize() quota: Propagate error from ->acquire_dquot()
…el/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Pretty much all bug fixes and clean ups for 4.3, after a lot of features and other churn going into 4.2" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: Revert "ext4: remove block_device_ejected" ext4: ratelimit the file system mounted message ext4: silence a format string false positive ext4: simplify some code in read_mmp_block() ext4: don't manipulate recovery flag when freezing no-journal fs jbd2: limit number of reserved credits ext4 crypto: remove duplicate header file ext4: update c/mtime on truncate up jbd2: avoid infinite loop when destroying aborted journal ext4, jbd2: add REQ_FUA flag when recording an error in the superblock ext4 crypto: fix spelling typo in comment ext4 crypto: exit cleanly if ext4_derive_key_aes() fails ext4: reject journal options for ext2 mounts ext4: implement cgroup writeback support ext4: replace ext4_io_submit->io_op with ->io_wbc ext4 crypto: check for too-short encrypted file names ext4 crypto: use a jbd2 transaction when adding a crypto policy jbd2: speedup jbd2_journal_dirty_metadata()
…teigland/linux-dlm Pull dlm updates from David Teigland: "This set mainly includes a change to the way the dlm uses the SCTP API in the kernel, removing the direct dependency on the sctp module. Other odd SCTP-related fixes are also included. The other notable fix is for a long standing regression in the behavior of lock value blocks for user space locks" * tag 'dlm-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: print error from kernel_sendpage dlm: fix lvb copy for user locks dlm: sctp_accept_from_sock() can be static dlm: fix reconnecting but not sending data dlm: replace BUG_ON with a less severe handling dlm: use sctp 1-to-1 API dlm: fix not reconnecting on connecting error handling dlm: fix race while closing connections dlm: fix connection stealing if using SCTP
…/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "The major work includes fixing and enhancing the existing extent_cache feature, which has been well settling down so far and now it becomes a default mount option accordingly. Also, this version newly registers a f2fs memory shrinker to reclaim several objects consumed by a couple of data structures in order to avoid memory pressures. Another new feature is to add ioctl(F2FS_GARBAGE_COLLECT) which triggers a cleaning job explicitly by users. Most of the other patches are to fix bugs occurred in the corner cases across the whole code area" * tag 'for-f2fs-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (85 commits) f2fs: upset segment_info repair f2fs: avoid accessing NULL pointer in f2fs_drop_largest_extent f2fs: update extent tree in batches f2fs: fix to release inode correctly f2fs: handle f2fs_truncate error correctly f2fs: avoid unneeded initializing when converting inline dentry f2fs: atomically set inode->i_flags f2fs: fix wrong pointer access during try_to_free_nids f2fs: use __GFP_NOFAIL to avoid infinite loop f2fs: lookup neighbor extent nodes for merging later f2fs: split __insert_extent_tree_ret for readability f2fs: kill dead code in __insert_extent_tree f2fs: adjust showing of extent cache stat f2fs: add largest/cached stat in extent cache f2fs: fix incorrect mapping for bmap f2fs: add annotation for space utilization of regular/inline dentry f2fs: fix to update cached_en of extent tree properly f2fs: fix typo f2fs: check the node block address of newly allocated nid f2fs: go out for insert_inode_locked failure ...
…/linux/kernel/git/tip/tip
Pull locking and atomic updates from Ingo Molnar:
"Main changes in this cycle are:
- Extend atomic primitives with coherent logic op primitives
(atomic_{or,and,xor}()) and deprecate the old partial APIs
(atomic_{set,clear}_mask())
The old ops were incoherent with incompatible signatures across
architectures and with incomplete support. Now every architecture
supports the primitives consistently (by Peter Zijlstra)
- Generic support for 'relaxed atomics':
- _acquire/release/relaxed() flavours of xchg(), cmpxchg() and {add,sub}_return()
- atomic_read_acquire()
- atomic_set_release()
This came out of porting qwrlock code to arm64 (by Will Deacon)
- Clean up the fragile static_key APIs that were causing repeat bugs,
by introducing a new one:
DEFINE_STATIC_KEY_TRUE(name);
DEFINE_STATIC_KEY_FALSE(name);
which define a key of different types with an initial true/false
value.
Then allow:
static_branch_likely()
static_branch_unlikely()
to take a key of either type and emit the right instruction for the
case. To be able to know the 'type' of the static key we encode it
in the jump entry (by Peter Zijlstra)
- Static key self-tests (by Jason Baron)
- qrwlock optimizations (by Waiman Long)
- small futex enhancements (by Davidlohr Bueso)
- ... and misc other changes"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
jump_label/x86: Work around asm build bug on older/backported GCCs
locking, ARM, atomics: Define our SMP atomics in terms of _relaxed() operations
locking, include/llist: Use linux/atomic.h instead of asm/cmpxchg.h
locking/qrwlock: Make use of _{acquire|release|relaxed}() atomics
locking/qrwlock: Implement queue_write_unlock() using smp_store_release()
locking/lockref: Remove homebrew cmpxchg64_relaxed() macro definition
locking, asm-generic: Add _{relaxed|acquire|release}() variants for 'atomic_long_t'
locking, asm-generic: Rework atomic-long.h to avoid bulk code duplication
locking/atomics: Add _{acquire|release|relaxed}() variants of some atomic operations
locking, compiler.h: Cast away attributes in the WRITE_ONCE() magic
locking/static_keys: Make verify_keys() static
jump label, locking/static_keys: Update docs
locking/static_keys: Provide a selftest
jump_label: Provide a self-test
s390/uaccess, locking/static_keys: employ static_branch_likely()
x86, tsc, locking/static_keys: Employ static_branch_likely()
locking/static_keys: Add selftest
locking/static_keys: Add a new static_key interface
locking/static_keys: Rework update logic
locking/static_keys: Add static_key_{en,dis}able() helpers
...
…linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Tooling fixes plus a handful of late arriving tooling changes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Fix link time error with sample_reg_masks on non x86 perf build: Fix Intel PT instruction decoder dependency problem perf dwarf: Fix potential array out of bounds access perf record: Add ability to name registers to record perf/x86: Add list of register names perf script: Enable printing of interrupted machine state perf evlist: Open event on evsel cpus and threads bpf tools: New API to get name from a BPF object perf tools: Fix build on powerpc broken by pt/bts
Pull ARM development updates from Russell King:
"Included in this update:
- moving PSCI code from ARM64/ARM to drivers/
- removal of some architecture internals from global kernel view
- addition of software based "privileged no access" support using the
old domains register to turn off the ability for kernel
loads/stores to access userspace. Only the proper accessors will
be usable.
- addition of early fixup support for early console
- re-addition (and reimplementation) of OMAP special interconnect
barrier
- removal of finish_arch_switch()
- only expose cpuX/online in sysfs if hotpluggable
- a number of code cleanups"
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (41 commits)
ARM: software-based priviledged-no-access support
ARM: entry: provide uaccess assembly macro hooks
ARM: entry: get rid of multiple macro definitions
ARM: 8421/1: smp: Collapse arch_cpu_idle_dead() into cpu_die()
ARM: uaccess: provide uaccess_save_and_enable() and uaccess_restore()
ARM: mm: improve do_ldrd_abort macro
ARM: entry: ensure that IRQs are enabled when calling syscall_trace_exit()
ARM: entry: efficiency cleanups
ARM: entry: get rid of asm_trace_hardirqs_on_cond
ARM: uaccess: simplify user access assembly
ARM: domains: remove DOMAIN_TABLE
ARM: domains: keep vectors in separate domain
ARM: domains: get rid of manager mode for user domain
ARM: domains: move initial domain setting value to asm/domains.h
ARM: domains: provide domain_mask()
ARM: domains: switch to keeping domain value in register
ARM: 8419/1: dma-mapping: harmonize definition of DMA_ERROR_CODE
ARM: 8417/1: refactor bitops functions with BIT_MASK() and BIT_WORD()
ARM: 8416/1: Feroceon: use of_iomap() to map register base
ARM: 8415/1: early fixmap support for earlycon
...
Pull ARM pcmcia updates from Russell King: "A series of changes updating the PXA and SA11x0 PCMCIA code to use devm_* APIs, and resolve some resource leaks in doing so. This results in a few small cleanups which are included in this set. FYI, the recommit of these today is to add Robert Jarzmik's reviewed-by tags, which I'd forgotten to add from mid-July" * 'pcmcia' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: pcmcia: soc_common: remove skt_dev_info's clk pointer pcmcia: sa11xx_base.c: remove useless init/exit functions pcmcia: sa1111: simplify clk handing in sa1111_pcmcia_add() pcmcia: sa1111: update socket driver to use devm_clk_get() API pcmcia: pxa2xx: convert memory allocation to devm_* API pcmcia: pxa2xx: update socket driver to use devm_clk_get() API pcmcia: sa11x0: convert memory allocation to devm_* API pcmcia: sa11x0: fix missing clk_put() in sa11x0 socket drivers
…l/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask
from Benjamin Herrenschmidt
- EEH fixes for SRIOV from Gavin
- introduce rtas_get_sensor_fast() for IRQ handlers from Thomas Huth
- use hardware RNG for arch_get_random_seed_* not arch_get_random_*
from Paul Mackerras
- seccomp filter support from Michael Ellerman
- opal_cec_reboot2() handling for HMIs & machine checks from Mahesh
Salgaonkar
- add powerpc timebase as a trace clock source from Naveen N. Rao
- misc cleanups in the xmon, signal & SLB code from Anshuman Khandual
- add an inline function to update POWER8 HID0 from Gautham R. Shenoy
- fix pte_pagesize_index() crash on 4K w/64K hash from Michael Ellerman
- drop support for 64K local store on 4K kernels from Michael Ellerman
- move dma_get_required_mask() from pnv_phb to pci_controller_ops from
Andrew Donnellan
- initialize distance lookup table from drconf path from Nikunj A
Dadhania
- enable RTC class support from Vaibhav Jain
- disable automatically blocked PCI config from Gavin Shan
- add LEDs driver for PowerNV platform from Vasant Hegde
- fix endianness issues in the HVSI driver from Laurent Dufour
- kexec endian fixes from Samuel Mendoza-Jonas
- fix corrupted pdn list from Gavin Shan
- fix fenced PHB caused by eeh_slot_error_detail() from Gavin Shan
- Freescale updates from Scott: Highlights include 32-bit memcpy/memset
optimizations, checksum optimizations, 85xx config fragments and
updates, device tree updates, e6500 fixes for non-SMP, and misc
cleanup and minor fixes.
- a ton of cxl updates & fixes:
- add explicit precision specifiers from Rasmus Villemoes
- use more common format specifier from Rasmus Villemoes
- destroy cxl_adapter_idr on module_exit from Johannes Thumshirn
- destroy afu->contexts_idr on release of an afu from Johannes
Thumshirn
- compile with -Werror from Daniel Axtens
- EEH support from Daniel Axtens
- plug irq_bitmap getting leaked in cxl_context from Vaibhav Jain
- add alternate MMIO error handling from Ian Munsie
- allow release of contexts which have been OPENED but not STARTED
from Andrew Donnellan
- remove use of macro DEFINE_PCI_DEVICE_TABLE from Vaishali Thakkar
- release irqs if memory allocation fails from Vaibhav Jain
- remove racy attempt to force EEH invocation in reset from Daniel
Axtens
- fix + cleanup error paths in cxl_dev_context_init from Ian Munsie
- fix force unmapping mmaps of contexts allocated through the kernel
api from Ian Munsie
- set up and enable PSL Timebase from Philippe Bergheaud
* tag 'powerpc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (140 commits)
cxl: Set up and enable PSL Timebase
cxl: Fix force unmapping mmaps of contexts allocated through the kernel api
cxl: Fix + cleanup error paths in cxl_dev_context_init
powerpc/eeh: Fix fenced PHB caused by eeh_slot_error_detail()
powerpc/pseries: Cleanup on pci_dn_reconfig_notifier()
powerpc/pseries: Fix corrupted pdn list
powerpc/powernv: Enable LEDS support
powerpc/iommu: Set default DMA offset in dma_dev_setup
cxl: Remove racy attempt to force EEH invocation in reset
cxl: Release irqs if memory allocation fails
cxl: Remove use of macro DEFINE_PCI_DEVICE_TABLE
powerpc/powernv: Fix mis-merge of OPAL support for LEDS driver
powerpc/powernv: Reset HILE before kexec_sequence()
powerpc/kexec: Reset secondary cpu endianness before kexec
powerpc/hvsi: Fix endianness issues in the HVSI driver
leds/powernv: Add driver for PowerNV platform
powerpc/powernv: Create LED platform device
powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states
powerpc/powernv: Fix the log message when disabling VF
cxl: Allow release of contexts which have been OPENED but not STARTED
...
…ream-linus
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for 4.3 for MIPS. Here's the summary:
Three fixes that didn't make 4.2-stable:
- a -Os build might compile the kernel using the MIPS16 instruction
set but the R2 optimized inline functions in <uapi/asm/swab.h> are
implemented using 32-bit wide instructions which is invalid.
- a build error in pgtable-bits.h for a particular kernel
configuration.
- accessing registers of the CM GCR might have been compiled to use
64 bit accesses but these registers are onl 32 bit wide.
And also a few new bits:
- move the ATH79 GPIO driver to drivers/gpio
- the definition of IRQCHIP_DECLARE has moved to linux/irqchip.h,
change ATH79 accordingly.
- fix definition of pgprot_writecombine
- add an implementation of dma_map_ops.mmap
- fix alignment of quiet build output for vmlinuz link
- BCM47xx: Use kmemdup rather than duplicating its implementation
- Netlogic: Fix 0x0x prefixes of constants.
- merge Bjorn Helgaas' series to remove most of the weak keywords
from function declarations.
- CP0 and CP1 registers are best considered treated as unsigned
values to avoid large values from becoming negative values.
- improve support for the MIPS GIC timer.
- enable common clock framework for Malta and SEAD3.
- a number of improvments and fixes to dump_tlb().
- document the MIPS TLB dump functionality in Magic SysRq.
- Cavium Octeon CN68XX improvments.
- NetLogic improvments.
- irq: Use access helper irq_data_get_affinity_mask.
- handle MSA unaligned accesses.
- a number of R6-related math-emu fixes.
- support for I6400.
- improvments to MSA support.
- add uprobes support.
- move from deprecated __initcall to arch_initcall.
- remove finish_arch_switch().
- IRQ cleanups by Thomas Gleixner.
- migrate to new 'set-state' interface.
- random small cleanups"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (148 commits)
MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16.
MIPS: Fix alignment of quiet build output for vmlinuz link
MIPS: math-emu: Remove unused handle_dsemul function declaration
MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction
MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction
MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction
MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction
MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction
MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction
MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction
MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction
MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction
MIPS: inst.h: Add new MIPS R6 FPU opcodes
MIPS: Octeon: Fix management port MII address on Kontron S1901
MIPS: BCM47xx: Use kmemdup rather than duplicating its implementation
STAGING: Octeon: Use common helpers for determining interface and port
MIPS: Octeon: Support interfaces 4 and 5
MIPS: Octeon: Set up 1:1 mapping between CN68XX PKO queues and ports
MIPS: Octeon: Initialize CN68XX PKO
STAGING: Octeon: Support CN68XX style WQE
...
…el/git/arm64/linux
Pull arm64 updates from Will Deacon:
- Support for new architectural features introduced in ARMv8.1:
* Privileged Access Never (PAN) to catch user pointer dereferences in
the kernel
* Large System Extension (LSE) for building scalable atomics and locks
(depends on locking/arch-atomic from tip, which is included here)
* Hardware Dirty Bit Management (DBM) for updating clean PTEs
automatically
- Move our PSCI implementation out into drivers/firmware/, where it can
be shared with arch/arm/. RMK has also pulled this component branch
and has additional patches moving arch/arm/ over. MAINTAINERS is
updated accordingly.
- Better BUG implementation based on the BRK instruction for trapping
- Leaf TLB invalidation for unmapping user pages
- Support for PROBE_ONLY PCI configurations
- Various cleanups and non-critical fixes, including:
* Always flush FP/SIMD state over exec()
* Restrict memblock additions based on range of linear mapping
* Ensure *(LIST_POISON) generates a fatal fault
* Context-tracking syscall return no longer corrupts return value when
not forced on.
* Alternatives patching synchronisation/stability improvements
* Signed sub-word cmpxchg compare fix (tickled by HAVE_CMPXCHG_LOCAL)
* Force SMP=y
* Hide direct DCC access from userspace
* Fix EFI stub memory allocation when DRAM starts at 0x0
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits)
arm64: flush FP/SIMD state correctly after execve()
arm64: makefile: fix perf_callchain.o kconfig dependency
arm64: set MAX_MEMBLOCK_ADDR according to linear region size
of/fdt: make memblock maximum physical address arch configurable
arm64: Fix source code file path in comments
arm64: entry: always restore x0 from the stack on syscall return
arm64: mdscr_el1: avoid exposing DCC to userspace
arm64: kconfig: Move LIST_POISON to a safe value
arm64: Add __exception_irq_entry definition for function graph
arm64: mm: ensure patched kernel text is fetched from PoU
arm64: alternatives: ensure secondary CPUs execute ISB after patching
arm64: make ll/sc __cmpxchg_case_##name asm consistent
arm64: dma-mapping: Simplify pgprot handling
arm64: restore cpu suspend/resume functionality
ARM64: PCI: do not enable resources on PROBE_ONLY systems
arm64: cmpxchg: truncate sub-word signed types before comparison
arm64: alternative: put secondary CPUs into polling loop during patch
arm64/Documentation: clarify wording regarding memory below the Image
arm64: lse: fix lse cmpxchg code indentation
arm64: remove redundant object file list
...
Pull tile updates from Chris Metcalf: "This includes secure computing support as well as miscellaneous minor improvements" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: correct some typos in opcode type names tile/vdso: emit a GNU hash as well tile: Remove finish_arch_switch tile: enable full SECCOMP support tile/time: Migrate to new 'set-state' interface
…git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.3 kernel cycle.
There is quite a lot going on in the GPIO subsystem this merge window,
so the main matter is decribed below.
The hits in other subsystems when making the GPIO flags optional are
all ACKed by their respective subsystem maintainers.
Core changes:
- Root out the wrapper devm_gpiod_get() and gpiod_get() etc versions
of the descriptor calls that did not use the flags argument on the
end. This was around for too long and eventually Uwe Kleine-König
took the time to clean it out and the last users are removed along
with the macros in this tag. In several cases the use of flags
simplifies the code. For this reason we have (ACKed) patches
hitting in DRM, IIO, media, NFC, USB+PHY up until we hammer in the
nail with removing the macros.
- Add a fat document describing how much ready-made GPIO stuff we
have i the kernel to discourage people from reinventing a square
wheel in userspace, as so often happens.
- Create a separate lockdep class for each instance of a GPIO IRQ
chip instead of using one class for all chips, as the current code
will not work with systems with several GPIO chips doing lockdep
debugging.
- Protect against driver unloading also when a GPIO line is only used
as IRQ for the GPIOLIB_IRQCHIP helpers.
- If the GPIO chip has no designated owner, assign the parent device
driver owner as owner.
- Consolidation of chained IRQ handler install/remove replacing all
call sites where irq_set_handler_data() and
irq_set_chained_handler() were done in succession with a combined
call to irq_set_chained_handler_and_data().
This series was created by Thomas Gleixner after the problem was
observed by Russell King.
- Tglx also made another series of patches switching
__irq_set_handler_locked() for irq_set_handler_locked() which is
way cleaner.
- Tglx and Jiang Liu wrote a good bunch of patches to make use of
irq_desc_get_xxx() accessors and avoid looking up irq_descs from
IRQ numbers. The goal is to get rid of the irq number from the
handlers in the IRQ flow which is nice.
- Rob Herring killed off the set_irq_flags() for all GPIO drivers.
This was an ARM specific function that is replaced with the generic
irq_modify_status() where special flags are actually needed.
- When an OF node has a pin range for its GPIOs, return -EPROBE_DEFER
if the pin controller isn't available. Pretty logical, yet needed
to be fixed.
- If a driver using GPIOLIB_IRQCHIP has its own irq_*_resources call
back, then call these instead of the defaults provided by the
GPIOLIB.
- Fix an undocumented ABI hole: named GPIOs were not properly
documented.
Driver improvements:
- Add get_direction() support to the generic GPIO driver, it's
strange that we didn't have that before.
- Make it possible to have input-only GPIO chips using the generic
GPIO driver.
- Clean out platform data support from the Emma Mobile (EM) driver
- Finegrained runtime PM support for the RCAR driver.
- Support r8a7795 (R-car H3) in the RCAR driver.
- Support interrupts on GPIOs 16 thru 31 in the DaVinci driver.
- Some consolidation and new support in the MPC8xxx driver, we now
support MPC5125.
- Preempt-RT-friendly patches: the OMAP, MPC8xxx, drivers uses raw
spinlocks making it work better with the realime patches.
- Interrupt support for the EXTRAXFS GPIO driver.
- Make the ETRAXFS GPIO driver support also ARTPEC-3.
- Interrupt and wakeup support for the BRCMSTB driver, also for
wakeup from S5 cold boot.
- Mask MXC IRQs during suspend.
- Improve OMAP2 GPIO set_debounce() to work according to spec.
- The VF610 driver handles IRQs properly.
New drivers:
- ZTE ZX GPIO driver"
* tag 'gpio-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
Revert "gpio: extraxfs: fix returnvar.cocci warnings"
gpio: tc3589x: use static container helper
gpio: xlp: fix error return code
gpio: vf610: handle level IRQ's properly
gpio: max732x: Fix error handling in probe()
gpio: omap: fix clk_prepare/unprepare usage
gpio: omap: protect regs access in omap_gpio_irq_handler
gpio: omap: fix omap2_set_gpio_debounce
gpio: omap: switch to use platform_get_irq
gpio: omap: remove wrong irq_domain_remove usage in probe
gpiolib: add description for gpio irqchip fields in struct gpio_chip
gpio: extraxfs: fix returnvar.cocci warnings
gpiolib: irqchip: use different lockdep class for each gpio irqchip
gpio/grgpio: fix deadlock in grgpio_irq_unmap()
Documentation: gpio: consumer: describe active low property
gpio: mxc: fix section mismatch warning
gpio/mxc: mask gpio interrupts in suspend
gpio: omap: Fix missing raw locks conversion
gpio: brcmstb: support wakeup from S5 cold boot
gpio: brcmstb: Add interrupt and wakeup source support
...
…el/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v4.3 development
cycle.
Like with GPIO it's a lot of stuff. If my subsystems are any sign of
the overall tempo of the kernel v4.3 will be a gigantic diff.
[ It looks like 4.3 is calmer than 4.2 in most other subsystems, but
we'll see - Linus ]
Core changes:
- It is possible configure groups in debugfs.
- Consolidation of chained IRQ handler install/remove replacing all
call sites where irq_set_handler_data() and
irq_set_chained_handler() were done in succession with a combined
call to irq_set_chained_handler_and_data(). This series was
created by Thomas Gleixner after the problem was observed by
Russell King.
- Tglx also made another series of patches switching
__irq_set_handler_locked() for irq_set_handler_locked() which is
way cleaner.
- Tglx also wrote a good bunch of patches to make use of
irq_desc_get_xxx() accessors and avoid looking up irq_descs from
IRQ numbers. The goal is to get rid of the irq number from the
handlers in the IRQ flow which is nice.
Driver feature enhancements:
- Power management support for the SiRF SoC Atlas 7.
- Power down support for the Qualcomm driver.
- Intel Cherryview and Baytrail: switch drivers to use raw spinlocks
in IRQ handlers to play nice with the realtime patch set.
- Rework and new modes handling for Qualcomm SPMI-MPP.
- Pinconf power source config for SH PFC.
New drivers and subdrivers:
- A new driver for Conexant Digicolor CX92755.
- A new driver for UniPhier PH1-LD4, PH1-Pro4, PH1-sLD8, PH1-Pro5,
ProXtream2 and PH1-LD6b SoC pin control support.
- Reverse-egineered the S/PDIF settings for the Allwinner sun4i
driver.
- Support for Qualcomm Technologies QDF2xxx ARM64 SoCs
- A new Freescale i.mx6ul subdriver.
Cleanup:
- Remove platform data support in a number of SH PFC subdrivers"
* tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (95 commits)
pinctrl: at91: fix null pointer dereference
pinctrl: mediatek: Implement wake handler and suspend resume
pinctrl: mediatek: Fix multiple registration issue.
pinctrl: sh-pfc: r8a7794: add USB pin groups
pinctrl: at91: Use generic irq_{request,release}_resources()
pinctrl: cherryview: Use raw_spinlock for locking
pinctrl: baytrail: Use raw_spinlock for locking
pinctrl: imx6ul: Remove .owner field
pinctrl: zynq: Fix typos in smc0_nand_grp and smc0_nor_grp
pinctrl: sh-pfc: Implement pinconf power-source param for voltage switching
clk: rockchip: add pclk_pd_pmu to the list of rk3288 critical clocks
pinctrl: sun4i: add spdif to pin description.
pinctrl: atlas7: clear ugly branch statements for pull and drivestrength
pinctrl: baytrail: Serialize all register access
pinctrl: baytrail: Drop FSF mailing address
pinctrl: rockchip: only enable gpio clock when it setting
pinctrl/mediatek: fix spelling mistake in dev_err error message
pinctrl: cherryview: Serialize all register access
pinctrl: UniPhier: PH1-Pro5: add I2C ch6 pin-mux setting
pinctrl: nomadik: reflect current input value
...
dabrace
pushed a commit
that referenced
this pull request
May 9, 2016
In certain probe conditions the interrupt came right after registering the handler causing a NULL pointer exception because of uninitialized waitqueue: $ udevadm trigger i2c-gpio i2c-gpio-1: using pins 143 (SDA) and 144 (SCL) i2c-gpio i2c-gpio-3: using pins 53 (SDA) and 52 (SCL) Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = e8b38000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: snd_soc_i2s(+) i2c_gpio(+) snd_soc_idma snd_soc_s3c_dma snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore ac97_bus spi_s3c64xx pwm_samsung dwc2 exynos_adc phy_exynos_usb2 exynosdrm exynos_rng rng_core rtc_s3c CPU: 0 PID: 717 Comm: data-provider-m Not tainted 4.6.0-rc1-next-20160401-00011-g1b8d87473b9e-dirty #101 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) (...) (__wake_up_common) from [<c0379624>] (__wake_up+0x38/0x4c) (__wake_up) from [<c0a41d30>] (ak8975_irq_handler+0x28/0x30) (ak8975_irq_handler) from [<c0386720>] (handle_irq_event_percpu+0x88/0x140) (handle_irq_event_percpu) from [<c038681c>] (handle_irq_event+0x44/0x68) (handle_irq_event) from [<c0389c40>] (handle_edge_irq+0xf0/0x19c) (handle_edge_irq) from [<c0385e04>] (generic_handle_irq+0x24/0x34) (generic_handle_irq) from [<c05ee360>] (exynos_eint_gpio_irq+0x50/0x68) (exynos_eint_gpio_irq) from [<c0386720>] (handle_irq_event_percpu+0x88/0x140) (handle_irq_event_percpu) from [<c038681c>] (handle_irq_event+0x44/0x68) (handle_irq_event) from [<c0389a70>] (handle_fasteoi_irq+0xb4/0x194) (handle_fasteoi_irq) from [<c0385e04>] (generic_handle_irq+0x24/0x34) (generic_handle_irq) from [<c03860b4>] (__handle_domain_irq+0x5c/0xb4) (__handle_domain_irq) from [<c0301774>] (gic_handle_irq+0x54/0x94) (gic_handle_irq) from [<c030c910>] (__irq_usr+0x50/0x80) The bug was reproduced on exynos4412-trats2 (with a max77693 device also using i2c-gpio) after building max77693 as a module. Cc: <[email protected]> Fixes: 94a6d5c ("iio:ak8975 Implement data ready interrupt handling") Signed-off-by: Krzysztof Kozlowski <[email protected]> Tested-by: Gregor Boirie <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
dabrace
pushed a commit
that referenced
this pull request
Jun 7, 2018
__printf is useful to verify format and arguments. Fix arg mismatch reported by gcc, remove the following warnings (with W=1): arch/powerpc/kernel/prom_init.c:1467:31: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1471:31: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1504:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1505:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1506:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1507:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1508:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1509:33: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:1975:39: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘unsigned int’ arch/powerpc/kernel/prom_init.c:1986:27: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:2567:38: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:2567:46: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:2569:38: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ arch/powerpc/kernel/prom_init.c:2569:46: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘long unsigned int’ The patch also include arg mismatch fix for case with #define DEBUG_PROM (warning not listed here). This patch fix also the following warnings revealed by checkpatch: WARNING: Prefer using '"%s...", __func__' to using 'alloc_up', this function's name, in a string #101: FILE: arch/powerpc/kernel/prom_init.c:1235: + prom_debug("alloc_up(%lx, %lx)\n", size, align); and WARNING: Prefer using '"%s...", __func__' to using 'alloc_down', this function's name, in a string #138: FILE: arch/powerpc/kernel/prom_init.c:1278: + prom_debug("alloc_down(%lx, %lx, %s)\n", size, align, Signed-off-by: Mathieu Malaterre <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
dabrace
pushed a commit
that referenced
this pull request
Aug 20, 2019
packet_sendmsg() checks tx_ring.pg_vec to decide if it must call tpacket_snd(). Problem is that the check is lockless, meaning another thread can issue a concurrent setsockopt(PACKET_TX_RING ) to flip tx_ring.pg_vec back to NULL. Given that tpacket_snd() grabs pg_vec_lock mutex, we can perform the check again to solve the race. syzbot reported : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 11429 Comm: syz-executor394 Not tainted 5.3.0-rc4+ #101 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:packet_lookup_frame+0x8d/0x270 net/packet/af_packet.c:474 Code: c1 ee 03 f7 73 0c 80 3c 0e 00 0f 85 cb 01 00 00 48 8b 0b 89 c0 4c 8d 24 c1 48 b8 00 00 00 00 00 fc ff df 4c 89 e1 48 c1 e9 03 <80> 3c 01 00 0f 85 94 01 00 00 48 8d 7b 10 4d 8b 3c 24 48 b8 00 00 RSP: 0018:ffff88809f82f7b8 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff8880a45c7030 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 1ffff110148b8e06 RDI: ffff8880a45c703c RBP: ffff88809f82f7e8 R08: ffff888087aea200 R09: fffffbfff134ae50 R10: fffffbfff134ae4f R11: ffffffff89a5727f R12: 0000000000000000 R13: 0000000000000001 R14: ffff8880a45c6ac0 R15: 0000000000000000 FS: 00007fa04716f700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa04716edb8 CR3: 0000000091eb4000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: packet_current_frame net/packet/af_packet.c:487 [inline] tpacket_snd net/packet/af_packet.c:2667 [inline] packet_sendmsg+0x590/0x6250 net/packet/af_packet.c:2975 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:657 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439 do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 69e3c75 ("net: TX_RING and packet mmap") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
dabrace
pushed a commit
that referenced
this pull request
Feb 3, 2020
statfs calculates Total/Used/Avail disk space in block unit,
so we should translate soft/hard prjquota limit to block unit
as well.
Below testing result shows the block/inode numbers of
Total/Used/Avail from df command are all correct afer
applying this patch.
[root@localhost quota-tools]\# ./repquota -P /dev/sdb1
*** Report for project quotas on device /dev/sdb1
Block grace time: 7days; Inode grace time: 7days
Block limits File limits
Project used soft hard grace used soft hard grace
-----------------------------------------------------------
\#0 -- 4 0 0 1 0 0
\#101 -- 0 0 0 2 0 0
\#102 -- 0 10240 0 2 10 0
\#103 -- 0 0 20480 2 0 20
\#104 -- 0 10240 20480 2 10 20
\#105 -- 0 20480 10240 2 20 10
[root@localhost sdb1]\# lsattr -p t{1,2,3,4,5}
101 ----------------N-- t1/a1
102 ----------------N-- t2/a2
103 ----------------N-- t3/a3
104 ----------------N-- t4/a4
105 ----------------N-- t5/a5
[root@localhost sdb1]\# df -hi t{1,2,3,4,5}
Filesystem Inodes IUsed IFree IUse% Mounted on
/dev/sdb1 2.4M 21 2.4M 1% /mnt/sdb1
/dev/sdb1 10 2 8 20% /mnt/sdb1
/dev/sdb1 20 2 18 10% /mnt/sdb1
/dev/sdb1 10 2 8 20% /mnt/sdb1
/dev/sdb1 10 2 8 20% /mnt/sdb1
[root@localhost sdb1]\# df -h t{1,2,3,4,5}
Filesystem Size Used Avail Use% Mounted on
/dev/sdb1 10G 489M 9.6G 5% /mnt/sdb1
/dev/sdb1 10M 0 10M 0% /mnt/sdb1
/dev/sdb1 20M 0 20M 0% /mnt/sdb1
/dev/sdb1 10M 0 10M 0% /mnt/sdb1
/dev/sdb1 10M 0 10M 0% /mnt/sdb1
Fixes: 909110c ("f2fs: choose hardlimit when softlimit is larger than hardlimit in f2fs_statfs_project()")
Signed-off-by: Chengguang Xu <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
dabrace
pushed a commit
that referenced
this pull request
Oct 28, 2020
syzkaller found the following splat with CONFIG_DEBUG_KOBJECT_RELEASE=y: Read of size 1 at addr ffff000028e896b8 by task kworker/1:2/228 CPU: 1 PID: 228 Comm: kworker/1:2 Tainted: G S 5.9.0-rc8+ #101 Hardware name: linux,dummy-virt (DT) Workqueue: events kobject_delayed_cleanup Call trace: dump_backtrace+0x0/0x4d8 show_stack+0x34/0x48 dump_stack+0x174/0x1f8 print_address_description.constprop.0+0x5c/0x550 kasan_report+0x13c/0x1c0 __asan_report_load1_noabort+0x34/0x60 memcmp+0xd0/0xd8 gfs2_uevent+0xc4/0x188 kobject_uevent_env+0x54c/0x1240 kobject_uevent+0x2c/0x40 __kobject_del+0x190/0x1d8 kobject_delayed_cleanup+0x2bc/0x3b8 process_one_work+0x96c/0x18c0 worker_thread+0x3f0/0xc30 kthread+0x390/0x498 ret_from_fork+0x10/0x18 Allocated by task 1110: kasan_save_stack+0x28/0x58 __kasan_kmalloc.isra.0+0xc8/0xe8 kasan_kmalloc+0x10/0x20 kmem_cache_alloc_trace+0x1d8/0x2f0 alloc_super+0x64/0x8c0 sget_fc+0x110/0x620 get_tree_bdev+0x190/0x648 gfs2_get_tree+0x50/0x228 vfs_get_tree+0x84/0x2e8 path_mount+0x1134/0x1da8 do_mount+0x124/0x138 __arm64_sys_mount+0x164/0x238 el0_svc_common.constprop.0+0x15c/0x598 do_el0_svc+0x60/0x150 el0_svc+0x34/0xb0 el0_sync_handler+0xc8/0x5b4 el0_sync+0x15c/0x180 Freed by task 228: kasan_save_stack+0x28/0x58 kasan_set_track+0x28/0x40 kasan_set_free_info+0x24/0x48 __kasan_slab_free+0x118/0x190 kasan_slab_free+0x14/0x20 slab_free_freelist_hook+0x6c/0x210 kfree+0x13c/0x460 Use the same pattern as f2fs + ext4 where the kobject destruction must complete before allowing the FS itself to be freed. This means that we need an explicit free_sbd in the callers. Cc: Bob Peterson <[email protected]> Cc: Andreas Gruenbacher <[email protected]> Signed-off-by: Jamie Iles <[email protected]> [Also go to fail_free when init_names fails.] Signed-off-by: Andreas Gruenbacher <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.