Merge tag 'mmc-v3.18-1' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Fix SDIO IRQ bug
   - MMC regulator improvements
   - Fix slot-gpio card detect bug
   - Add support for Driver Stage Register
   - Convert the common MMC OF parser to use GPIO descriptors
   - Convert MMC_CAP2_NO_MULTI_READ into a callback, ->multi_io_quirk()
   - Some additional minor fixes

  MMC host:
   - mmci: Support Qualcomm specific DML layer for DMA
   - dw_mmc: Use common MMC regulators
   - dw_mmc: Add support for Rock-chips RK3288
   - tmio: Enable runtime PM support
   - tmio: Add support for R-Car Gen2 SoCs
   - tmio: Several fixes and improvements
   - omap_hsmmc: Removed Balaji from MAINTAINERS
   - jz4740: add DMA and pre/post support
   - sdhci: Add support for Intel Braswell
   - sdhci: Several fixes and improvements"

* tag 'mmc-v3.18-1' of git://git.linaro.org/people/ulf.hansson/mmc: (119 commits)
  ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board
  mmc: sdhci-acpi: Fix Braswell eMMC timeout clock frequency
  mmc: sdhci-acpi: Pass HID and UID to probe_slot
  mmc: sdhci-acpi: Get UID directly from acpi_device
  mmc, sdhci, bcm-kona, LLVMLinux: Remove use of __initconst
  mmc: sdhci-pci: Fix Braswell eMMC timeout clock frequency
  mmc: sdhci: Let a driver override timeout clock frequency
  mmc: sdhci-pci: Add Bay Trail and Braswell SD card detect
  mmc: sdhci-pci: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers
  mmc: sdhci-acpi: Add a HID and UID for a SD Card host controller
  mmc: sdhci-acpi: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllers
  mmc: sdhci: Add quirk for always getting TC with stop cmd
  mmc: core: restore detect line inversion semantics
  mmc: Fix incorrect warning when setting 0 Hz via debugfs
  mmc: Fix use of wrong device in mmc_gpiod_free_cd()
  mmc: atmel-mci: fix mismatched section on atmci_cleanup_slot
  mmc: rtsx_pci: Set power related cap2 macros
  mmc: core: Add new power_mode MMC_POWER_UNDEFINED
  mmc: sdhci: execute tuning when device is not busy
  mmc: atmel-mci: Release mmc resources on failure in probe
  ..

Documentation/devicetree/bindings/mmc/mmc.txt

@@ -40,6 +40,8 @@ Optional properties:
 - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported
 - mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported
 - mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported
+- dsr: Value the card's (optional) Driver Stage Register (DSR) should be
+  programmed with. Valid range: [0 .. 0xffff].
 
 *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
 polarity properties, we have to fix the meaning of the "normal" and "inverted"

Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt

@@ -10,12 +10,14 @@ extensions to the Synopsys Designware Mobile Storage Host Controller.
 Required Properties:
 
 * compatible: should be
-	- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following
+	- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following,
+							before RK3288
+	- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
 
 Example:
 
 	rkdwmmc0@12200000 {
-		compatible = "rockchip,rk2928-dw-mshc";
+		compatible = "rockchip,rk3288-dw-mshc";
 		reg = <0x12200000 0x1000>;
 		interrupts = <0 75 0>;
 		#address-cells = <1>;

Documentation/devicetree/bindings/mmc/tmio_mmc.txt

@@ -19,6 +19,9 @@ Required properties:
 		"renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC
 		"renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC
 		"renesas,sdhi-r8a7791" - SDHI IP on R8A7791 SoC
+		"renesas,sdhi-r8a7792" - SDHI IP on R8A7792 SoC
+		"renesas,sdhi-r8a7793" - SDHI IP on R8A7793 SoC
+		"renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC
 
 Optional properties:
 - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable

MAINTAINERS

@@ -6616,10 +6616,9 @@ S:	Maintained
 F:	drivers/mmc/host/omap.c
 
 OMAP HS MMC SUPPORT
-M:	Balaji T K <[email protected]>
 L:	[email protected]
 L:	[email protected]
-S:	Maintained
+S:	Orphan
 F:	drivers/mmc/host/omap_hsmmc.c
 
 OMAP RANDOM NUMBER GENERATOR SUPPORT

arch/arm/boot/dts/exynos5420-arndale-octa.dts

@@ -69,7 +69,8 @@
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-		vmmc-supply = <&ldo10_reg>;
+		vmmc-supply = <&ldo19_reg>;
+		vqmmc-supply = <&ldo13_reg>;
 		bus-width = <4>;
 		cap-sd-highspeed;
 	};

arch/arm/mach-shmobile/board-koelsch.c

@@ -331,7 +331,6 @@ SDHI_REGULATOR(2, RCAR_GP_PIN(7, 19), RCAR_GP_PIN(2, 26));
 static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
 			  MMC_CAP_POWER_OFF_CARD,
-	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
 };
 
@@ -344,7 +343,6 @@ static struct resource sdhi0_resources[] __initdata = {
 static struct sh_mobile_sdhi_info sdhi1_info __initdata = {
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
 			  MMC_CAP_POWER_OFF_CARD,
-	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
 };
 
@@ -357,7 +355,6 @@ static struct resource sdhi1_resources[] __initdata = {
 static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
 			  MMC_CAP_POWER_OFF_CARD,
-	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
 			  TMIO_MMC_WRPROTECT_DISABLE,
 };

arch/arm/mach-shmobile/board-lager.c

@@ -630,7 +630,6 @@ static void __init lager_add_rsnd_device(void)
 static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
 			  MMC_CAP_POWER_OFF_CARD,
-	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
 			  TMIO_MMC_WRPROTECT_DISABLE,
 };
@@ -644,7 +643,6 @@ static struct resource sdhi0_resources[] __initdata = {
 static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
 			  MMC_CAP_POWER_OFF_CARD,
-	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
 			  TMIO_MMC_WRPROTECT_DISABLE,
 };

drivers/mmc/card/block.c

@@ -977,7 +977,7 @@ static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req,
 		return ERR_CONTINUE;
 
 	/* Now for stop errors.  These aren't fatal to the transfer. */
-	pr_err("%s: error %d sending stop command, original cmd response %#x, card status %#x\n",
+	pr_info("%s: error %d sending stop command, original cmd response %#x, card status %#x\n",
 	       req->rq_disk->disk_name, brq->stop.error,
 	       brq->cmd.resp[0], status);
 
@@ -1398,10 +1398,15 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 		if (disable_multi)
 			brq->data.blocks = 1;
 
-		/* Some controllers can't do multiblock reads due to hw bugs */
-		if (card->host->caps2 & MMC_CAP2_NO_MULTI_READ &&
-		    rq_data_dir(req) == READ)
-			brq->data.blocks = 1;
+		/*
+		 * Some controllers have HW issues while operating
+		 * in multiple I/O mode
+		 */
+		if (card->host->ops->multi_io_quirk)
+			brq->data.blocks = card->host->ops->multi_io_quirk(card,
+						(rq_data_dir(req) == READ) ?
+						MMC_DATA_READ : MMC_DATA_WRITE,
+						brq->data.blocks);
 	}
 
 	if (brq->data.blocks > 1 || do_rel_wr) {
@@ -1923,8 +1928,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 		case MMC_BLK_ECC_ERR:
 			if (brq->data.blocks > 1) {
 				/* Redo read one sector at a time */
-				pr_warning("%s: retrying using single block read\n",
-					   req->rq_disk->disk_name);
+				pr_warn("%s: retrying using single block read\n",
+					req->rq_disk->disk_name);
 				disable_multi = 1;
 				break;
 			}
@@ -2131,7 +2136,7 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
 	md->disk->queue = md->queue.queue;
 	md->disk->driverfs_dev = parent;
 	set_disk_ro(md->disk, md->read_only || default_ro);
-	if (area_type & MMC_BLK_DATA_AREA_RPMB)
+	if (area_type & (MMC_BLK_DATA_AREA_RPMB | MMC_BLK_DATA_AREA_BOOT))
 		md->disk->flags |= GENHD_FL_NO_PART_SCAN;
 
 	/*

drivers/mmc/card/queue.c

@@ -229,14 +229,12 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
 		if (bouncesz > 512) {
 			mqrq_cur->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
 			if (!mqrq_cur->bounce_buf) {
-				pr_warning("%s: unable to "
-					"allocate bounce cur buffer\n",
+				pr_warn("%s: unable to allocate bounce cur buffer\n",
 					mmc_card_name(card));
 			}
 			mqrq_prev->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
 			if (!mqrq_prev->bounce_buf) {
-				pr_warning("%s: unable to "
-					"allocate bounce prev buffer\n",
+				pr_warn("%s: unable to allocate bounce prev buffer\n",
 					mmc_card_name(card));
 				kfree(mqrq_cur->bounce_buf);
 				mqrq_cur->bounce_buf = NULL;

drivers/mmc/card/sdio_uart.c

@@ -1063,8 +1063,8 @@ static int sdio_uart_probe(struct sdio_func *func,
 		return -ENOMEM;
 
 	if (func->class == SDIO_CLASS_UART) {
-		pr_warning("%s: need info on UART class basic setup\n",
-		       sdio_func_id(func));
+		pr_warn("%s: need info on UART class basic setup\n",
+			sdio_func_id(func));
 		kfree(port);
 		return -ENOSYS;
 	} else if (func->class == SDIO_CLASS_GPS) {
@@ -1082,9 +1082,8 @@ static int sdio_uart_probe(struct sdio_func *func,
 				break;
 		}
 		if (!tpl) {
-			pr_warning(
-       "%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
-			       sdio_func_id(func));
+			pr_warn("%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
+				sdio_func_id(func));
 			kfree(port);
 			return -EINVAL;
 		}

drivers/mmc/core/core.c

@@ -433,8 +433,8 @@ static void mmc_wait_for_req_done(struct mmc_host *host,
 		 */
 		if (cmd->sanitize_busy && cmd->error == -ETIMEDOUT) {
 			if (!mmc_interrupt_hpi(host->card)) {
-				pr_warning("%s: %s: Interrupted sanitize\n",
-					   mmc_hostname(host), __func__);
+				pr_warn("%s: %s: Interrupted sanitize\n",
+					mmc_hostname(host), __func__);
 				cmd->error = 0;
 				break;
 			} else {
@@ -995,7 +995,7 @@ void mmc_set_chip_select(struct mmc_host *host, int mode)
  */
 static void __mmc_set_clock(struct mmc_host *host, unsigned int hz)
 {
-	WARN_ON(hz < host->f_min);
+	WARN_ON(hz && hz < host->f_min);
 
 	if (hz > host->f_max)
 		hz = host->f_max;
@@ -1221,15 +1221,14 @@ int mmc_regulator_get_ocrmask(struct regulator *supply)
 	int			result = 0;
 	int			count;
 	int			i;
+	int			vdd_uV;
+	int			vdd_mV;
 
 	count = regulator_count_voltages(supply);
 	if (count < 0)
 		return count;
 
 	for (i = 0; i < count; i++) {
-		int		vdd_uV;
-		int		vdd_mV;
-
 		vdd_uV = regulator_list_voltage(supply, i);
 		if (vdd_uV <= 0)
 			continue;
@@ -1238,6 +1237,15 @@ int mmc_regulator_get_ocrmask(struct regulator *supply)
 		result |= mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV);
 	}
 
+	if (!result) {
+		vdd_uV = regulator_get_voltage(supply);
+		if (vdd_uV <= 0)
+			return vdd_uV;
+
+		vdd_mV = vdd_uV / 1000;
+		result = mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV);
+	}
+
 	return result;
 }
 EXPORT_SYMBOL_GPL(mmc_regulator_get_ocrmask);
@@ -1263,7 +1271,6 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc,
 
 	if (vdd_bit) {
 		int		tmp;
-		int		voltage;
 
 		/*
 		 * REVISIT mmc_vddrange_to_ocrmask() may have set some
@@ -1280,22 +1287,7 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc,
 			max_uV = min_uV + 100 * 1000;
 		}
 
-		/*
-		 * If we're using a fixed/static regulator, don't call
-		 * regulator_set_voltage; it would fail.
-		 */
-		voltage = regulator_get_voltage(supply);
-
-		if (!regulator_can_change_voltage(supply))
-			min_uV = max_uV = voltage;
-
-		if (voltage < 0)
-			result = voltage;
-		else if (voltage < min_uV || voltage > max_uV)
-			result = regulator_set_voltage(supply, min_uV, max_uV);
-		else
-			result = 0;
-
+		result = regulator_set_voltage(supply, min_uV, max_uV);
 		if (result == 0 && !mmc->regulator_enabled) {
 			result = regulator_enable(supply);
 			if (!result)
@@ -1425,8 +1417,8 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr)
 	if (!host->ops->start_signal_voltage_switch)
 		return -EPERM;
 	if (!host->ops->card_busy)
-		pr_warning("%s: cannot verify signal voltage switch\n",
-				mmc_hostname(host));
+		pr_warn("%s: cannot verify signal voltage switch\n",
+			mmc_hostname(host));
 
 	cmd.opcode = SD_SWITCH_VOLTAGE;
 	cmd.arg = 0;
@@ -1761,7 +1753,7 @@ void mmc_init_erase(struct mmc_card *card)
 		card->erase_shift = ffs(card->ssr.au) - 1;
 	} else if (card->ext_csd.hc_erase_size) {
 		card->pref_erase = card->ext_csd.hc_erase_size;
-	} else {
+	} else if (card->erase_size) {
 		sz = (card->csd.capacity << (card->csd.read_blkbits - 9)) >> 11;
 		if (sz < 128)
 			card->pref_erase = 512 * 1024 / 512;
@@ -1778,7 +1770,8 @@ void mmc_init_erase(struct mmc_card *card)
 			if (sz)
 				card->pref_erase += card->erase_size - sz;
 		}
-	}
+	} else
+		card->pref_erase = 0;
 }
 
 static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card,
@@ -2489,6 +2482,7 @@ void mmc_start_host(struct mmc_host *host)
 {
 	host->f_init = max(freqs[0], host->f_min);
 	host->rescan_disable = 0;
+	host->ios.power_mode = MMC_POWER_UNDEFINED;
 	if (host->caps2 & MMC_CAP2_NO_PRESCAN_POWERUP)
 		mmc_power_off(host);
 	else