Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "A set of fixes that should go into this series. This contains:

   - Fix from Bart for blk-mq requeue queue running, preventing a
     continued loop of run/restart.

   - Fix for a bio/blk-integrity issue, in two parts. One from
     Christoph, fixing where verification happens, and one from Milan,
     for a NULL profile.

   - NVMe pull request, most of the changes being for nvme-fc, but also
     a few trivial core/pci fixes"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvme: fix directive command numd calculation
  nvme: fix nvme reset command timeout handling
  nvme-pci: fix CMB sysfs file removal in reset path
  lpfc: support nvmet_fc defer_rcv callback
  nvmet_fc: add defer_req callback for deferment of cmd buffer return
  nvme: strip trailing 0-bytes in wwid_show
  block: Make blk_mq_delay_kick_requeue_list() rerun the queue at a quiet time
  bio-integrity: only verify integrity on the lowest stacked driver
  bio-integrity: Fix regression if profile verify_fn is NULL

block/bio-integrity.c

@@ -387,9 +387,11 @@ static void bio_integrity_verify_fn(struct work_struct *work)
  */
 bool __bio_integrity_endio(struct bio *bio)
 {
-	if (bio_op(bio) == REQ_OP_READ && !bio->bi_status) {
-		struct bio_integrity_payload *bip = bio_integrity(bio);
+	struct blk_integrity *bi = bdev_get_integrity(bio->bi_bdev);
+	struct bio_integrity_payload *bip = bio_integrity(bio);
 
+	if (bio_op(bio) == REQ_OP_READ && !bio->bi_status &&
+	    (bip->bip_flags & BIP_BLOCK_INTEGRITY) && bi->profile->verify_fn) {
 		INIT_WORK(&bip->bip_work, bio_integrity_verify_fn);
 		queue_work(kintegrityd_wq, &bip->bip_work);
 		return false;

block/blk-mq.c

@@ -684,8 +684,8 @@ EXPORT_SYMBOL(blk_mq_kick_requeue_list);
 void blk_mq_delay_kick_requeue_list(struct request_queue *q,
 				    unsigned long msecs)
 {
-	kblockd_schedule_delayed_work(&q->requeue_work,
-				      msecs_to_jiffies(msecs));
+	kblockd_mod_delayed_work_on(WORK_CPU_UNBOUND, &q->requeue_work,
+				    msecs_to_jiffies(msecs));
 }
 EXPORT_SYMBOL(blk_mq_delay_kick_requeue_list);
 

drivers/nvme/host/core.c

@@ -336,7 +336,7 @@ static int nvme_get_stream_params(struct nvme_ctrl *ctrl,
 
 	c.directive.opcode = nvme_admin_directive_recv;
 	c.directive.nsid = cpu_to_le32(nsid);
-	c.directive.numd = cpu_to_le32(sizeof(*s));
+	c.directive.numd = cpu_to_le32((sizeof(*s) >> 2) - 1);
 	c.directive.doper = NVME_DIR_RCV_ST_OP_PARAM;
 	c.directive.dtype = NVME_DIR_STREAMS;
 
@@ -1509,7 +1509,7 @@ static void nvme_set_queue_limits(struct nvme_ctrl *ctrl,
 	blk_queue_write_cache(q, vwc, vwc);
 }
 
-static void nvme_configure_apst(struct nvme_ctrl *ctrl)
+static int nvme_configure_apst(struct nvme_ctrl *ctrl)
 {
 	/*
 	 * APST (Autonomous Power State Transition) lets us program a
@@ -1538,16 +1538,16 @@ static void nvme_configure_apst(struct nvme_ctrl *ctrl)
 	 * then don't do anything.
 	 */
 	if (!ctrl->apsta)
-		return;
+		return 0;
 
 	if (ctrl->npss > 31) {
 		dev_warn(ctrl->device, "NPSS is invalid; not using APST\n");
-		return;
+		return 0;
 	}
 
 	table = kzalloc(sizeof(*table), GFP_KERNEL);
 	if (!table)
-		return;
+		return 0;
 
 	if (!ctrl->apst_enabled || ctrl->ps_max_latency_us == 0) {
 		/* Turn off APST. */
@@ -1629,6 +1629,7 @@ static void nvme_configure_apst(struct nvme_ctrl *ctrl)
 		dev_err(ctrl->device, "failed to set APST feature (%d)\n", ret);
 
 	kfree(table);
+	return ret;
 }
 
 static void nvme_set_latency_tolerance(struct device *dev, s32 val)
@@ -1835,13 +1836,16 @@ int nvme_init_identify(struct nvme_ctrl *ctrl)
 		 * In fabrics we need to verify the cntlid matches the
 		 * admin connect
 		 */
-		if (ctrl->cntlid != le16_to_cpu(id->cntlid))
+		if (ctrl->cntlid != le16_to_cpu(id->cntlid)) {
 			ret = -EINVAL;
+			goto out_free;
+		}
 
 		if (!ctrl->opts->discovery_nqn && !ctrl->kas) {
 			dev_err(ctrl->device,
 				"keep-alive support is mandatory for fabrics\n");
 			ret = -EINVAL;
+			goto out_free;
 		}
 	} else {
 		ctrl->cntlid = le16_to_cpu(id->cntlid);
@@ -1856,11 +1860,20 @@ int nvme_init_identify(struct nvme_ctrl *ctrl)
 	else if (!ctrl->apst_enabled && prev_apst_enabled)
 		dev_pm_qos_hide_latency_tolerance(ctrl->device);
 
-	nvme_configure_apst(ctrl);
-	nvme_configure_directives(ctrl);
+	ret = nvme_configure_apst(ctrl);
+	if (ret < 0)
+		return ret;
+
+	ret = nvme_configure_directives(ctrl);
+	if (ret < 0)
+		return ret;
 
 	ctrl->identified = true;
 
+	return 0;
+
+out_free:
+	kfree(id);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(nvme_init_identify);
@@ -2004,9 +2017,11 @@ static ssize_t wwid_show(struct device *dev, struct device_attribute *attr,
 	if (memchr_inv(ns->eui, 0, sizeof(ns->eui)))
 		return sprintf(buf, "eui.%8phN\n", ns->eui);
 
-	while (ctrl->serial[serial_len - 1] == ' ')
+	while (serial_len > 0 && (ctrl->serial[serial_len - 1] == ' ' ||
+				  ctrl->serial[serial_len - 1] == '\0'))
 		serial_len--;
-	while (ctrl->model[model_len - 1] == ' ')
+	while (model_len > 0 && (ctrl->model[model_len - 1] == ' ' ||
+				 ctrl->model[model_len - 1] == '\0'))
 		model_len--;
 
 	return sprintf(buf, "nvme.%04x-%*phN-%*phN-%08x\n", ctrl->vid,

drivers/nvme/host/pci.c

@@ -1558,11 +1558,9 @@ static inline void nvme_release_cmb(struct nvme_dev *dev)
 	if (dev->cmb) {
 		iounmap(dev->cmb);
 		dev->cmb = NULL;
-		if (dev->cmbsz) {
-			sysfs_remove_file_from_group(&dev->ctrl.device->kobj,
-						     &dev_attr_cmb.attr, NULL);
-			dev->cmbsz = 0;
-		}
+		sysfs_remove_file_from_group(&dev->ctrl.device->kobj,
+					     &dev_attr_cmb.attr, NULL);
+		dev->cmbsz = 0;
 	}
 }
 
@@ -1953,16 +1951,14 @@ static int nvme_pci_enable(struct nvme_dev *dev)
 
 	/*
 	 * CMBs can currently only exist on >=1.2 PCIe devices. We only
-	 * populate sysfs if a CMB is implemented. Note that we add the
-	 * CMB attribute to the nvme_ctrl kobj which removes the need to remove
-	 * it on exit. Since nvme_dev_attrs_group has no name we can pass
-	 * NULL as final argument to sysfs_add_file_to_group.
+	 * populate sysfs if a CMB is implemented. Since nvme_dev_attrs_group
+	 * has no name we can pass NULL as final argument to
+	 * sysfs_add_file_to_group.
 	 */
 
 	if (readl(dev->bar + NVME_REG_VS) >= NVME_VS(1, 2, 0)) {
 		dev->cmb = nvme_map_cmb(dev);
-
-		if (dev->cmbsz) {
+		if (dev->cmb) {
 			if (sysfs_add_file_to_group(&dev->ctrl.device->kobj,
 						    &dev_attr_cmb.attr, NULL))
 				dev_warn(dev->ctrl.device,