Merge git://git.infradead.org/hdrcleanup-2.6

* git://git.infradead.org/hdrcleanup-2.6: (63 commits)
  [S390] __FD_foo definitions.
  Switch to __s32 types in joystick.h instead of C99 types for consistency.
  Add <sys/types.h> to headers included for userspace in <linux/input.h>
  Move inclusion of <linux/compat.h> out of user scope in asm-x86_64/mtrr.h
  Remove struct fddi_statistics from user view in <linux/if_fddi.h>
  Move user-visible parts of drivers/s390/crypto/z90crypt.h to include/asm-s390
  Revert include/media changes: Mauro says those ioctls are only used in-kernel(!)
  Include <linux/types.h> and use __uXX types in <linux/cramfs_fs.h>
  Use __uXX types in <linux/i2o_dev.h>, include <linux/ioctl.h> too
  Remove private struct dx_hash_info from public view in <linux/ext3_fs.h>
  Include <linux/types.h> and use __uXX types in <linux/affs_hardblocks.h>
  Use __uXX types in <linux/divert.h> for struct divert_blk et al.
  Use __u32 for elf_addr_t in <asm-powerpc/elf.h>, not u32. It's user-visible.
  Remove PPP_FCS from user view in <linux/ppp_defs.h>, remove __P mess entirely
  Use __uXX types in user-visible structures in <linux/nbd.h>
  Don't use 'u32' in user-visible struct ip_conntrack_old_tuple.
  Use __uXX types for S390 DASD volume label definitions which are user-visible
  S390 BIODASDREADCMB ioctl should use __u64 not u64 type.
  Remove unneeded inclusion of <linux/time.h> from <linux/ufs_fs.h>
  Fix private integer types used in V4L2 ioctls.
  ...

Manually resolve conflict in include/linux/mtd/physmap.h

drivers/s390/crypto/z90crypt.h

@@ -1,7 +1,7 @@
 /*
  *  linux/drivers/s390/crypto/z90crypt.h
  *
- *  z90crypt 1.3.3
+ *  z90crypt 1.3.3 (kernel-private header)
  *
  *  Copyright (C)  2001, 2005 IBM Corporation
  *  Author(s): Robert Burroughs ([email protected])
@@ -27,188 +27,7 @@
 #ifndef _Z90CRYPT_H_
 #define _Z90CRYPT_H_
 
-#include <linux/ioctl.h>
-
-#define z90crypt_VERSION 1
-#define z90crypt_RELEASE 3	// 2 = PCIXCC, 3 = rewrite for coding standards
-#define z90crypt_VARIANT 3	// 3 = CEX2A support
-
-/**
- * struct ica_rsa_modexpo
- *
- * Requirements:
- * - outputdatalength is at least as large as inputdatalength.
- * - All key parts are right justified in their fields, padded on
- *   the left with zeroes.
- * - length(b_key) = inputdatalength
- * - length(n_modulus) = inputdatalength
- */
-struct ica_rsa_modexpo {
-	char __user *	inputdata;
-	unsigned int	inputdatalength;
-	char __user *	outputdata;
-	unsigned int	outputdatalength;
-	char __user *	b_key;
-	char __user *	n_modulus;
-};
-
-/**
- * struct ica_rsa_modexpo_crt
- *
- * Requirements:
- * - inputdatalength is even.
- * - outputdatalength is at least as large as inputdatalength.
- * - All key parts are right justified in their fields, padded on
- *   the left with zeroes.
- * - length(bp_key)	= inputdatalength/2 + 8
- * - length(bq_key)	= inputdatalength/2
- * - length(np_key)	= inputdatalength/2 + 8
- * - length(nq_key)	= inputdatalength/2
- * - length(u_mult_inv) = inputdatalength/2 + 8
- */
-struct ica_rsa_modexpo_crt {
-	char __user *	inputdata;
-	unsigned int	inputdatalength;
-	char __user *	outputdata;
-	unsigned int	outputdatalength;
-	char __user *	bp_key;
-	char __user *	bq_key;
-	char __user *	np_prime;
-	char __user *	nq_prime;
-	char __user *	u_mult_inv;
-};
-
-#define Z90_IOCTL_MAGIC 'z'  // NOTE:  Need to allocate from linux folks
-
-/**
- * Interface notes:
- *
- * The ioctl()s which are implemented (along with relevant details)
- * are:
- *
- *   ICARSAMODEXPO
- *     Perform an RSA operation using a Modulus-Exponent pair
- *     This takes an ica_rsa_modexpo struct as its arg.
- *
- *     NOTE: please refer to the comments preceding this structure
- *           for the implementation details for the contents of the
- *           block
- *
- *   ICARSACRT
- *     Perform an RSA operation using a Chinese-Remainder Theorem key
- *     This takes an ica_rsa_modexpo_crt struct as its arg.
- *
- *     NOTE: please refer to the comments preceding this structure
- *           for the implementation details for the contents of the
- *           block
- *
- *   Z90STAT_TOTALCOUNT
- *     Return an integer count of all device types together.
- *
- *   Z90STAT_PCICACOUNT
- *     Return an integer count of all PCICAs.
- *
- *   Z90STAT_PCICCCOUNT
- *     Return an integer count of all PCICCs.
- *
- *   Z90STAT_PCIXCCMCL2COUNT
- *     Return an integer count of all MCL2 PCIXCCs.
- *
- *   Z90STAT_PCIXCCMCL3COUNT
- *     Return an integer count of all MCL3 PCIXCCs.
- *
- *   Z90STAT_CEX2CCOUNT
- *     Return an integer count of all CEX2Cs.
- *
- *   Z90STAT_CEX2ACOUNT
- *     Return an integer count of all CEX2As.
- *
- *   Z90STAT_REQUESTQ_COUNT
- *     Return an integer count of the number of entries waiting to be
- *     sent to a device.
- *
- *   Z90STAT_PENDINGQ_COUNT
- *     Return an integer count of the number of entries sent to a
- *     device awaiting the reply.
- *
- *   Z90STAT_TOTALOPEN_COUNT
- *     Return an integer count of the number of open file handles.
- *
- *   Z90STAT_DOMAIN_INDEX
- *     Return the integer value of the Cryptographic Domain.
- *
- *   Z90STAT_STATUS_MASK
- *     Return an 64 element array of unsigned chars for the status of
- *     all devices.
- *       0x01: PCICA
- *       0x02: PCICC
- *       0x03: PCIXCC_MCL2
- *       0x04: PCIXCC_MCL3
- *       0x05: CEX2C
- *       0x06: CEX2A
- *       0x0d: device is disabled via the proc filesystem
- *
- *   Z90STAT_QDEPTH_MASK
- *     Return an 64 element array of unsigned chars for the queue
- *     depth of all devices.
- *
- *   Z90STAT_PERDEV_REQCNT
- *     Return an 64 element array of unsigned integers for the number
- *     of successfully completed requests per device since the device
- *     was detected and made available.
- *
- *   ICAZ90STATUS (deprecated)
- *     Return some device driver status in a ica_z90_status struct
- *     This takes an ica_z90_status struct as its arg.
- *
- *     NOTE: this ioctl() is deprecated, and has been replaced with
- *           single ioctl()s for each type of status being requested
- *
- *   Z90STAT_PCIXCCCOUNT (deprecated)
- *     Return an integer count of all PCIXCCs (MCL2 + MCL3).
- *     This is DEPRECATED now that MCL3 PCIXCCs are treated differently from
- *     MCL2 PCIXCCs.
- *
- *   Z90QUIESCE (not recommended)
- *     Quiesce the driver.  This is intended to stop all new
- *     requests from being processed.  Its use is NOT recommended,
- *     except in circumstances where there is no other way to stop
- *     callers from accessing the driver.  Its original use was to
- *     allow the driver to be "drained" of work in preparation for
- *     a system shutdown.
- *
- *     NOTE: once issued, this ban on new work cannot be undone
- *           except by unloading and reloading the driver.
- */
-
-/**
- * Supported ioctl calls
- */
-#define ICARSAMODEXPO	_IOC(_IOC_READ|_IOC_WRITE, Z90_IOCTL_MAGIC, 0x05, 0)
-#define ICARSACRT	_IOC(_IOC_READ|_IOC_WRITE, Z90_IOCTL_MAGIC, 0x06, 0)
-
-/* DEPRECATED status calls (bound for removal at some point) */
-#define ICAZ90STATUS	_IOR(Z90_IOCTL_MAGIC, 0x10, struct ica_z90_status)
-#define Z90STAT_PCIXCCCOUNT	_IOR(Z90_IOCTL_MAGIC, 0x43, int)
-
-/* unrelated to ICA callers */
-#define Z90QUIESCE	_IO(Z90_IOCTL_MAGIC, 0x11)
-
-/* New status calls */
-#define Z90STAT_TOTALCOUNT	_IOR(Z90_IOCTL_MAGIC, 0x40, int)
-#define Z90STAT_PCICACOUNT	_IOR(Z90_IOCTL_MAGIC, 0x41, int)
-#define Z90STAT_PCICCCOUNT	_IOR(Z90_IOCTL_MAGIC, 0x42, int)
-#define Z90STAT_PCIXCCMCL2COUNT	_IOR(Z90_IOCTL_MAGIC, 0x4b, int)
-#define Z90STAT_PCIXCCMCL3COUNT	_IOR(Z90_IOCTL_MAGIC, 0x4c, int)
-#define Z90STAT_CEX2CCOUNT	_IOR(Z90_IOCTL_MAGIC, 0x4d, int)
-#define Z90STAT_CEX2ACOUNT	_IOR(Z90_IOCTL_MAGIC, 0x4e, int)
-#define Z90STAT_REQUESTQ_COUNT	_IOR(Z90_IOCTL_MAGIC, 0x44, int)
-#define Z90STAT_PENDINGQ_COUNT	_IOR(Z90_IOCTL_MAGIC, 0x45, int)
-#define Z90STAT_TOTALOPEN_COUNT _IOR(Z90_IOCTL_MAGIC, 0x46, int)
-#define Z90STAT_DOMAIN_INDEX	_IOR(Z90_IOCTL_MAGIC, 0x47, int)
-#define Z90STAT_STATUS_MASK	_IOR(Z90_IOCTL_MAGIC, 0x48, char[64])
-#define Z90STAT_QDEPTH_MASK	_IOR(Z90_IOCTL_MAGIC, 0x49, char[64])
-#define Z90STAT_PERDEV_REQCNT	_IOR(Z90_IOCTL_MAGIC, 0x4a, int[64])
+#include <asm/z90crypt.h>
 
 /**
  * local errno definitions

include/acpi/platform/aclinux.h

@@ -49,7 +49,6 @@
 
 #ifdef __KERNEL__
 
-#include <linux/config.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/ctype.h>

include/acpi/processor.h

@@ -2,7 +2,6 @@
 #define __ACPI_PROCESSOR_H
 
 #include <linux/kernel.h>
-#include <linux/config.h>
 
 #include <asm/acpi.h>
 

include/asm-alpha/bitops.h

@@ -1,7 +1,6 @@
 #ifndef _ALPHA_BITOPS_H
 #define _ALPHA_BITOPS_H
 
-#include <linux/config.h>
 #include <asm/compiler.h>
 
 /*

include/asm-alpha/cache.h

@@ -4,7 +4,6 @@
 #ifndef __ARCH_ALPHA_CACHE_H
 #define __ARCH_ALPHA_CACHE_H
 
-#include <linux/config.h>
 
 /* Bytes per L1 (data) cache line. */
 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EV6)

include/asm-alpha/cacheflush.h

@@ -1,7 +1,6 @@
 #ifndef _ALPHA_CACHEFLUSH_H
 #define _ALPHA_CACHEFLUSH_H
 
-#include <linux/config.h>
 #include <linux/mm.h>
 
 /* Caches aren't brain-dead on the Alpha. */

include/asm-alpha/core_cia.h

@@ -4,7 +4,6 @@
 /* Define to experiment with fitting everything into one 512MB HAE window.  */
 #define CIA_ONE_HAE_WINDOW 1
 
-#include <linux/config.h>
 #include <linux/types.h>
 #include <asm/compiler.h>
 

include/asm-alpha/core_t2.h

@@ -1,7 +1,6 @@
 #ifndef __ALPHA_T2__H__
 #define __ALPHA_T2__H__
 
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/spinlock.h>
 #include <asm/compiler.h>

include/asm-alpha/dma-mapping.h

@@ -1,7 +1,6 @@
 #ifndef _ALPHA_DMA_MAPPING_H
 #define _ALPHA_DMA_MAPPING_H
 
-#include <linux/config.h>
 
 #ifdef CONFIG_PCI
 

include/asm-alpha/dma.h

@@ -18,7 +18,6 @@
 #ifndef _ASM_DMA_H
 #define _ASM_DMA_H
 
-#include <linux/config.h>
 #include <linux/spinlock.h>
 #include <asm/io.h>
 

include/asm-alpha/floppy.h

@@ -10,7 +10,6 @@
 #ifndef __ASM_ALPHA_FLOPPY_H
 #define __ASM_ALPHA_FLOPPY_H
 
-#include <linux/config.h>
 
 #define fd_inb(port)			inb_p(port)
 #define fd_outb(value,port)		outb_p(value,port)

include/asm-alpha/hardirq.h

@@ -1,7 +1,6 @@
 #ifndef _ALPHA_HARDIRQ_H
 #define _ALPHA_HARDIRQ_H
 
-#include <linux/config.h>
 #include <linux/threads.h>
 #include <linux/cache.h>
 

include/asm-alpha/hw_irq.h

@@ -1,7 +1,6 @@
 #ifndef _ALPHA_HW_IRQ_H
 #define _ALPHA_HW_IRQ_H
 
-#include <linux/config.h>
 
 static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) {}
 

include/asm-alpha/ide.h

@@ -13,7 +13,6 @@
 
 #ifdef __KERNEL__
 
-#include <linux/config.h>
 
 #define IDE_ARCH_OBSOLETE_DEFAULTS
 

include/asm-alpha/io.h

@@ -3,7 +3,6 @@
 
 #ifdef __KERNEL__
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <asm/compiler.h>
 #include <asm/system.h>

include/asm-alpha/irq.h

@@ -8,7 +8,6 @@
  */
 
 #include <linux/linkage.h>
-#include <linux/config.h>
 
 #if   defined(CONFIG_ALPHA_GENERIC)
 

include/asm-alpha/kmap_types.h

@@ -3,7 +3,6 @@
 
 /* Dummy header just to define km_type. */
 
-#include <linux/config.h>
 
 #ifdef CONFIG_DEBUG_HIGHMEM
 # define D(n) __KM_FENCE_##n ,

include/asm-alpha/machvec.h

@@ -1,7 +1,6 @@
 #ifndef __ALPHA_MACHVEC_H
 #define __ALPHA_MACHVEC_H 1
 
-#include <linux/config.h>
 #include <linux/types.h>
 
 /*

include/asm-alpha/mmu_context.h

@@ -7,7 +7,6 @@
  * Copyright (C) 1996, Linus Torvalds
  */
 
-#include <linux/config.h>
 #include <asm/system.h>
 #include <asm/machvec.h>
 #include <asm/compiler.h>

include/asm-alpha/mmzone.h

@@ -5,7 +5,6 @@
 #ifndef _ASM_MMZONE_H_
 #define _ASM_MMZONE_H_
 
-#include <linux/config.h>
 #include <asm/smp.h>
 
 struct bootmem_data_t; /* stupid forward decl. */

include/asm-alpha/page.h

@@ -1,7 +1,6 @@
 #ifndef _ALPHA_PAGE_H
 #define _ALPHA_PAGE_H
 
-#include <linux/config.h>
 #include <asm/pal.h>
 
 /* PAGE_SHIFT determines the page size */

include/asm-alpha/param.h

@@ -5,7 +5,6 @@
    hardware ignores reprogramming.  We also need userland buy-in to the 
    change in HZ, since this is visible in the wait4 resources etc.  */
 
-#include <linux/config.h>
 
 #ifndef HZ
 # ifndef CONFIG_ALPHA_RAWHIDE

include/asm-alpha/pgalloc.h

@@ -1,7 +1,6 @@
 #ifndef _ALPHA_PGALLOC_H
 #define _ALPHA_PGALLOC_H
 
-#include <linux/config.h>
 #include <linux/mm.h>
 #include <linux/mmzone.h>
 

include/asm-alpha/pgtable.h

@@ -10,7 +10,6 @@
  * This hopefully works with any standard Alpha page-size, as defined
  * in <asm/page.h> (currently 8192).
  */
-#include <linux/config.h>
 #include <linux/mmzone.h>
 
 #include <asm/page.h>

include/asm-alpha/serial.h

@@ -2,7 +2,6 @@
  * include/asm-alpha/serial.h
  */
 
-#include <linux/config.h>
 
 /*
  * This assumes you have a 1.8432 MHz clock for your UART.

include/asm-alpha/smp.h

@@ -1,7 +1,6 @@
 #ifndef __ASM_SMP_H
 #define __ASM_SMP_H
 
-#include <linux/config.h>
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <linux/bitops.h>