Merge branches 'for-3.16/i2c-hid', 'for-3.16/rmi4', 'for-3.16/sony' a…

…nd 'for-3.16/thingm' into for-linus

.mailmap

@@ -99,6 +99,7 @@ Sachin P Sant <[email protected]>
 Sam Ravnborg <[email protected]>
 Sascha Hauer <[email protected]>
 S.Çağlar Onur <[email protected]>
+Shiraz Hashim <[email protected]> <[email protected]>
 Simon Kelley <[email protected]>
 Stéphane Witzmann <[email protected]>
 Stephen Hemminger <[email protected]>

Documentation/DocBook/drm.tmpl

@@ -2285,6 +2285,11 @@ void intel_crt_init(struct drm_device *dev)
     <sect2>
       <title>Modeset Helper Functions Reference</title>
 !Edrivers/gpu/drm/drm_crtc_helper.c
+    </sect2>
+    <sect2>
+      <title>Output Probing Helper Functions Reference</title>
+!Pdrivers/gpu/drm/drm_probe_helper.c output probing helper overview
+!Edrivers/gpu/drm/drm_probe_helper.c
     </sect2>
     <sect2>
       <title>fbdev Helper Functions Reference</title>

Documentation/devicetree/bindings/arm/arch_timer.txt

@@ -19,6 +19,9 @@ to deliver its interrupts via SPIs.
 
 - clock-frequency : The frequency of the main counter, in Hz. Optional.
 
+- always-on : a boolean property. If present, the timer is powered through an
+  always-on power domain, therefore it never loses context.
+
 Example:
 
 	timer {

Documentation/devicetree/bindings/ata/apm-xgene.txt

@@ -24,6 +24,7 @@ Required properties:
   * "sata-phy" for the SATA 6.0Gbps PHY
 
 Optional properties:
+- dma-coherent		: Present if dma operations are coherent
 - status		: Shall be "ok" if enabled or "disabled" if disabled.
 			  Default is "ok".
 
@@ -55,6 +56,7 @@ Example:
 			      <0x0 0x1f22e000 0x0 0x1000>,
 			      <0x0 0x1f227000 0x0 0x1000>;
 			interrupts = <0x0 0x87 0x4>;
+			dma-coherent;
 			status = "ok";
 			clocks = <&sataclk 0>;
 			phys = <&phy2 0>;
@@ -69,6 +71,7 @@ Example:
 			      <0x0 0x1f23e000 0x0 0x1000>,
 			      <0x0 0x1f237000 0x0 0x1000>;
 			interrupts = <0x0 0x88 0x4>;
+			dma-coherent;
 			status = "ok";
 			clocks = <&sataclk 0>;
 			phys = <&phy3 0>;

Documentation/devicetree/bindings/net/arc_emac.txt

@@ -4,11 +4,15 @@ Required properties:
 - compatible: Should be "snps,arc-emac"
 - reg: Address and length of the register set for the device
 - interrupts: Should contain the EMAC interrupts
-- clock-frequency: CPU frequency. It is needed to calculate and set polling
-period of EMAC.
 - max-speed: see ethernet.txt file in the same directory.
 - phy: see ethernet.txt file in the same directory.
 
+Clock handling:
+The clock frequency is needed to calculate and set polling period of EMAC.
+It must be provided by one of:
+- clock-frequency: CPU frequency.
+- clocks: reference to the clock supplying the EMAC.
+
 Child nodes of the driver are the individual PHY devices connected to the
 MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
 
@@ -19,7 +23,11 @@ Examples:
 		reg = <0xc0fc2000 0x3c>;
 		interrupts = <6>;
 		mac-address = [ 00 11 22 33 44 55 ];
+
 		clock-frequency = <80000000>;
+		/* or */
+		clocks = <&emac_clock>;
+
 		max-speed = <100>;
 		phy = <&phy0>;
 

Documentation/devicetree/bindings/net/ethernet.txt

@@ -10,7 +10,7 @@ The following properties are common to the Ethernet controllers:
 - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
   the maximum frame size (there's contradiction in ePAPR).
 - phy-mode: string, operation mode of the PHY interface; supported values are
-  "mii", "gmii", "sgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id",
+  "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id",
   "rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii"; this is now a de-facto
   standard property;
 - phy-connection-type: the same as "phy-mode" property but described in ePAPR;

Documentation/devicetree/bindings/net/socfpga-dwmac.txt

@@ -23,5 +23,5 @@ gmac0: ethernet@ff700000 {
 	interrupt-names = "macirq";
 	mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
 	clocks = <&emac_0_clk>;
-	clocks-names = "stmmaceth";
+	clock-names = "stmmaceth";
 };

Documentation/devicetree/bindings/net/stmmac.txt

@@ -33,7 +33,7 @@ Optional properties:
 - max-frame-size: See ethernet.txt file in the same directory
 - clocks: If present, the first clock should be the GMAC main clock,
   further clocks may be specified in derived bindings.
-- clocks-names: One name for each entry in the clocks property, the
+- clock-names: One name for each entry in the clocks property, the
   first one should be "stmmaceth".
 
 Examples:

Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt

@@ -83,7 +83,7 @@ Example:
 		reg 		= <0xfe61f080 0x4>;
 		reg-names	= "irqmux";
 		interrupts 	= <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
-		interrupts-names = "irqmux";
+		interrupt-names	= "irqmux";
 		ranges 		= <0 0xfe610000 0x5000>;
 
 		PIO0: gpio@fe610000 {
@@ -165,7 +165,7 @@ sdhci0:sdhci@fe810000{
 	interrupt-parent = <&PIO3>;
 	#interrupt-cells = <2>;
 	interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; /* Interrupt line via PIO3-3 */
-	interrupts-names = "card-detect";
+	interrupt-names = "card-detect";
 	pinctrl-names = "default";
 	pinctrl-0	= <&pinctrl_mmc>;
 };

Documentation/devicetree/bindings/serial/efm32-uart.txt

@@ -1,7 +1,7 @@
 * Energymicro efm32 UART
 
 Required properties:
-- compatible : Should be "efm32,uart"
+- compatible : Should be "energymicro,efm32-uart"
 - reg : Address and length of the register set
 - interrupts : Should contain uart interrupt
 
@@ -13,7 +13,7 @@ Optional properties:
 Example:
 
 uart@0x4000c400 {
-	compatible = "efm32,uart";
+	compatible = "energymicro,efm32-uart";
 	reg = <0x4000c400 0x400>;
 	interrupts = <15>;
 	efm32,location = <0>;

Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt

@@ -47,7 +47,7 @@ mcasp0: mcasp0@1d00000 {
 	reg = <0x100000 0x3000>;
 	reg-names "mpu";
 	interrupts = <82>, <83>;
-	interrupts-names = "tx", "rx";
+	interrupt-names = "tx", "rx";
 	op-mode = <0>;		/* MCASP_IIS_MODE */
 	tdm-slots = <2>;
 	serial-dir = <

Documentation/devicetree/bindings/sound/tlv320aic31xx.txt

@@ -13,6 +13,9 @@ Required properties:
     "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
 
 - reg - <int> -  I2C slave address
+- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
+  DVDD-supply : power supplies for the device as covered in
+  Documentation/devicetree/bindings/regulator/regulator.txt
 
 
 Optional properties:
@@ -24,9 +27,6 @@ Optional properties:
         3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
 	If this node is not mentioned or if the value is unknown, then
 	micbias	is set to 2.0V.
-- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
-  DVDD-supply : power supplies for the device as covered in
-  Documentation/devicetree/bindings/regulator/regulator.txt
 
 CODEC output pins:
   * HPL

Documentation/ja_JP/HOWTO

@@ -315,7 +315,7 @@ Andrew Morton が Linux-kernel メーリングリストにカーネルリリー
 もし、3.x.y カーネルが存在しない場合には、番号が一番大きい 3.x が
 最新の安定版カーネルです。
 
-3.x.y は "stable" チーム <[email protected]> でメンテされており、必
+3.x.y は "stable" チーム <stable@vger.kernel.org> でメンテされており、必
 要に応じてリリースされます。通常のリリース期間は 2週間毎ですが、差し迫っ
 た問題がなければもう少し長くなることもあります。セキュリティ関連の問題
 の場合はこれに対してだいたいの場合、すぐにリリースがされます。

Documentation/ja_JP/stable_kernel_rules.txt

@@ -50,16 +50,16 @@ linux-2.6.29/Documentation/stable_kernel_rules.txt
 
 -stable ツリーにパッチを送付する手続き-
 
- - 上記の規則に従っているかを確認した後に、[email protected] にパッチ
+ - 上記の規則に従っているかを確認した後に、stable@vger.kernel.org にパッチ
    を送る。
  - 送信者はパッチがキューに受け付けられた際には ACK を、却下された場合
    には NAK を受け取る。この反応は開発者たちのスケジュールによって、数
    日かかる場合がある。
  - もし受け取られたら、パッチは他の開発者たちと関連するサブシステムの
    メンテナーによるレビューのために -stable キューに追加される。
- - パッチに [email protected] のアドレスが付加されているときには、それ
+ - パッチに stable@vger.kernel.org のアドレスが付加されているときには、それ
    が Linus のツリーに入る時に自動的に stable チームに email される。
- - セキュリティパッチはこのエイリアス ([email protected]) に送られるべ
+ - セキュリティパッチはこのエイリアス (stable@vger.kernel.org) に送られるべ
    きではなく、代わりに [email protected] のアドレスに送られる。
 
 レビューサイクル-

Documentation/kernel-parameters.txt

@@ -804,13 +804,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	dhash_entries=	[KNL]
 			Set number of hash buckets for dentry cache.
 
-	digi=		[HW,SERIAL]
-			IO parameters + enable/disable command.
-
-	digiepca=	[HW,SERIAL]
-			See drivers/char/README.epca and
-			Documentation/serial/digiepca.txt.
-
 	disable=	[IPV6]
 			See Documentation/networking/ipv6.txt.
 
@@ -2939,9 +2932,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	rhash_entries=	[KNL,NET]
 			Set number of hash buckets for route cache
 
-	riscom8=	[HW,SERIAL]
-			Format: <io_board1>[,<io_board2>[,...<io_boardN>]]
-
 	ro		[KNL] Mount root device read-only on boot
 
 	root=		[KNL] Root filesystem
@@ -3083,9 +3073,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
 			See Documentation/laptops/sonypi.txt
 
-	specialix=	[HW,SERIAL] Specialix multi-serial port adapter
-			See Documentation/serial/specialix.txt.
-
 	spia_io_base=	[HW,MTD]
 	spia_fio_base=
 	spia_pedr=

Documentation/magic-number.txt

@@ -63,8 +63,6 @@ Magic Name            Number      Structure            File
 PG_MAGIC              'P'         pg_{read,write}_hdr include/linux/pg.h
 CMAGIC                0x0111      user              include/linux/a.out.h
 MKISS_DRIVER_MAGIC    0x04bf      mkiss_channel     drivers/net/mkiss.h
-RISCOM8_MAGIC         0x0907      riscom_port       drivers/char/riscom8.h
-SPECIALIX_MAGIC       0x0907      specialix_port    drivers/char/specialix_io8.h
 HDLC_MAGIC            0x239e      n_hdlc            drivers/char/n_hdlc.c
 APM_BIOS_MAGIC        0x4101      apm_user          arch/x86/kernel/apm_32.c
 CYCLADES_MAGIC        0x4359      cyclades_port     include/linux/cyclades.h
@@ -82,7 +80,6 @@ STRIP_MAGIC           0x5303      strip             drivers/net/strip.c
 X25_ASY_MAGIC         0x5303      x25_asy           drivers/net/x25_asy.h
 SIXPACK_MAGIC         0x5304      sixpack           drivers/net/hamradio/6pack.h
 AX25_MAGIC            0x5316      ax_disp           drivers/net/mkiss.h
-ESP_MAGIC             0x53ee      esp_struct        drivers/char/esp.h
 TTY_MAGIC             0x5401      tty_struct        include/linux/tty.h
 MGSL_MAGIC            0x5401      mgsl_info         drivers/char/synclink.c
 TTY_DRIVER_MAGIC      0x5402      tty_driver        include/linux/tty_driver.h
@@ -94,13 +91,10 @@ USB_BLUETOOTH_MAGIC   0x6d02      usb_bluetooth     drivers/usb/class/bluetty.c
 RFCOMM_TTY_MAGIC      0x6d02                        net/bluetooth/rfcomm/tty.c
 USB_SERIAL_PORT_MAGIC 0x7301      usb_serial_port   drivers/usb/serial/usb-serial.h
 CG_MAGIC              0x00090255  ufs_cylinder_group include/linux/ufs_fs.h
-A2232_MAGIC           0x000a2232  gs_port           drivers/char/ser_a2232.h
 RPORT_MAGIC           0x00525001  r_port            drivers/char/rocket_int.h
 LSEMAGIC              0x05091998  lse               drivers/fc4/fc.c
 GDTIOCTL_MAGIC        0x06030f07  gdth_iowr_str     drivers/scsi/gdth_ioctl.h
 RIEBL_MAGIC           0x09051990                    drivers/net/atarilance.c
-RIO_MAGIC             0x12345678  gs_port           drivers/char/rio/rio_linux.c
-SX_MAGIC              0x12345678  gs_port           drivers/char/sx.h
 NBD_REQUEST_MAGIC     0x12560953  nbd_request       include/linux/nbd.h
 RED_MAGIC2            0x170fc2a5  (any)             mm/slab.c
 BAYCOM_MAGIC          0x19730510  baycom_state      drivers/net/baycom_epp.c
@@ -116,7 +110,6 @@ ISDN_ASYNC_MAGIC      0x49344C01  modem_info        include/linux/isdn.h
 CTC_ASYNC_MAGIC       0x49344C01  ctc_tty_info      drivers/s390/net/ctctty.c
 ISDN_NET_MAGIC        0x49344C02  isdn_net_local_s  drivers/isdn/i4l/isdn_net_lib.h
 SAVEKMSG_MAGIC2       0x4B4D5347  savekmsg          arch/*/amiga/config.c
-STLI_BOARDMAGIC       0x4bc6c825  stlibrd           include/linux/istallion.h
 CS_STATE_MAGIC        0x4c4f4749  cs_state          sound/oss/cs46xx.c
 SLAB_C_MAGIC          0x4f17a36d  kmem_cache        mm/slab.c
 COW_MAGIC             0x4f4f4f4d  cow_header_v1     arch/um/drivers/ubd_user.c
@@ -127,10 +120,8 @@ SCC_MAGIC             0x52696368  gs_port           drivers/char/scc.h
 SAVEKMSG_MAGIC1       0x53415645  savekmsg          arch/*/amiga/config.c
 GDA_MAGIC             0x58464552  gda               arch/mips/include/asm/sn/gda.h
 RED_MAGIC1            0x5a2cf071  (any)             mm/slab.c
-STL_PORTMAGIC         0x5a7182c9  stlport           include/linux/stallion.h
 EEPROM_MAGIC_VALUE    0x5ab478d2  lanai_dev         drivers/atm/lanai.c
 HDLCDRV_MAGIC         0x5ac6e778  hdlcdrv_state     include/linux/hdlcdrv.h
-EPCA_MAGIC            0x5c6df104  channel           include/linux/epca.h
 PCXX_MAGIC            0x5c6df104  channel           drivers/char/pcxx.h
 KV_MAGIC              0x5f4b565f  kernel_vars_s     arch/mips/include/asm/sn/klkernvars.h
 I810_STATE_MAGIC      0x63657373  i810_state        sound/oss/i810_audio.c
@@ -142,17 +133,14 @@ SLOT_MAGIC            0x67267322  slot              drivers/hotplug/acpiphp.h
 LO_MAGIC              0x68797548  nbd_device        include/linux/nbd.h
 OPROFILE_MAGIC        0x6f70726f  super_block       drivers/oprofile/oprofilefs.h
 M3_STATE_MAGIC        0x734d724d  m3_state          sound/oss/maestro3.c
-STL_PANELMAGIC        0x7ef621a1  stlpanel          include/linux/stallion.h
 VMALLOC_MAGIC         0x87654320  snd_alloc_track   sound/core/memory.c
 KMALLOC_MAGIC         0x87654321  snd_alloc_track   sound/core/memory.c
 PWC_MAGIC             0x89DC10AB  pwc_device        drivers/usb/media/pwc.h
 NBD_REPLY_MAGIC       0x96744668  nbd_reply         include/linux/nbd.h
-STL_BOARDMAGIC        0xa2267f52  stlbrd            include/linux/stallion.h
 ENI155_MAGIC          0xa54b872d  midway_eprom	    drivers/atm/eni.h
 SCI_MAGIC             0xbabeface  gs_port           drivers/char/sh-sci.h
 CODA_MAGIC            0xC0DAC0DA  coda_file_info    fs/coda/coda_fs_i.h
 DPMEM_MAGIC           0xc0ffee11  gdt_pci_sram      drivers/scsi/gdth.h
-STLI_PORTMAGIC        0xe671c7a1  stliport          include/linux/istallion.h
 YAM_MAGIC             0xF10A7654  yam_port          drivers/net/hamradio/yam.c
 CCB_MAGIC             0xf2691ad2  ccb               drivers/scsi/ncr53c8xx.c
 QUEUE_MAGIC_FREE      0xf7e1c9a3  queue_entry       drivers/scsi/arm/queue.c

Documentation/networking/scaling.txt

@@ -429,7 +429,7 @@ RPS and RFS were introduced in kernel 2.6.35. XPS was incorporated into
 ([email protected])
 
 Accelerated RFS was introduced in 2.6.35. Original patches were
-submitted by Ben Hutchings ([email protected])
+submitted by Ben Hutchings ([email protected])
 
 Authors:
 Tom Herbert ([email protected])

Documentation/serial/00-INDEX

@@ -2,23 +2,15 @@
 	- this file.
 README.cycladesZ
 	- info on Cyclades-Z firmware loading.
-digiepca.txt
-	- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
 driver
 	- intro to the low level serial driver.
 moxa-smartio
 	- file with info on installing/using Moxa multiport serial driver.
 n_gsm.txt
 	- GSM 0710 tty multiplexer howto.
-riscom8.txt
-	- notes on using the RISCom/8 multi-port serial driver.
 rocket.txt
 	- info on the Comtrol RocketPort multiport serial driver.
 serial-rs485.txt
 	- info about RS485 structures and support in the kernel.
-specialix.txt
-	- info on hardware/driver for specialix IO8+ multiport serial card.
-sx.txt
-	- info on the Specialix SX/SI multiport serial driver.
 tty.txt
 	- guide to the locking policies of the tty layer.