phy: mediatek: phy-mtk-mipi-dsi: Simplify with dev_err_probe()

Use the dev_err_probe() helper to simplify error handling during probe.

Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>

drivers/phy/mediatek/phy-mtk-mipi-dsi.c

@@ -154,11 +154,9 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
 		return PTR_ERR(mipi_tx->regs);
 
 	ref_clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(ref_clk)) {
-		ret = PTR_ERR(ref_clk);
-		dev_err(dev, "Failed to get reference clock: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(ref_clk))
+		return dev_err_probe(dev, PTR_ERR(ref_clk),
+				     "Failed to get reference clock\n");
 
 	ret = of_property_read_u32(dev->of_node, "drive-strength-microamp",
 				   &mipi_tx->mipitx_drive);
@@ -178,27 +176,20 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
 
 	ret = of_property_read_string(dev->of_node, "clock-output-names",
 				      &clk_init.name);
-	if (ret < 0) {
-		dev_err(dev, "Failed to read clock-output-names: %d\n", ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to read clock-output-names\n");
 
 	clk_init.ops = mipi_tx->driver_data->mipi_tx_clk_ops;
 
 	mipi_tx->pll_hw.init = &clk_init;
 	mipi_tx->pll = devm_clk_register(dev, &mipi_tx->pll_hw);
-	if (IS_ERR(mipi_tx->pll)) {
-		ret = PTR_ERR(mipi_tx->pll);
-		dev_err(dev, "Failed to register PLL: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(mipi_tx->pll))
+		return dev_err_probe(dev, PTR_ERR(mipi_tx->pll), "Failed to register PLL\n");
 
 	phy = devm_phy_create(dev, NULL, &mtk_mipi_tx_ops);
-	if (IS_ERR(phy)) {
-		ret = PTR_ERR(phy);
-		dev_err(dev, "Failed to create MIPI D-PHY: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(phy))
+		return dev_err_probe(dev, PTR_ERR(phy), "Failed to create MIPI D-PHY\n");
+
 	phy_set_drvdata(phy, mipi_tx);
 
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);