Merge tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm…

…/linux/kernel/git/tip/tip

Pull locking fixes from Thomas Gleixner:
 "A set of fixes for lockdep, tracing and RCU:

   - Prevent recursion by using raw_cpu_* operations

   - Fixup the interrupt state in the cpu idle code to be consistent

   - Push rcu_idle_enter/exit() invocations deeper into the idle path so
     that the lock operations are inside the RCU watching sections

   - Move trace_cpu_idle() into generic code so it's called before RCU
     goes idle.

   - Handle raw_local_irq* vs. local_irq* operations correctly

   - Move the tracepoints out from under the lockdep recursion handling
     which turned out to be fragile and inconsistent"

* tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep,trace: Expose tracepoints
  lockdep: Only trace IRQ edges
  mips: Implement arch_irqs_disabled()
  arm64: Implement arch_irqs_disabled()
  nds32: Implement arch_irqs_disabled()
  locking/lockdep: Cleanup
  x86/entry: Remove unused THUNKs
  cpuidle: Move trace_cpu_idle() into generic code
  cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic
  sched,idle,rcu: Push rcu_idle deeper into the idle path
  cpuidle: Fixup IRQ state
  lockdep: Use raw_cpu_*() for per-cpu variables

arch/arm/mach-omap2/pm34xx.c

@@ -298,11 +298,7 @@ static void omap3_pm_idle(void)
 	if (omap_irq_pending())
 		return;
 
-	trace_cpu_idle_rcuidle(1, smp_processor_id());
-
 	omap_sram_idle();
-
-	trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
 }
 
 #ifdef CONFIG_SUSPEND

arch/arm64/include/asm/irqflags.h

@@ -95,6 +95,11 @@ static inline int arch_irqs_disabled_flags(unsigned long flags)
 	return res;
 }
 
+static inline int arch_irqs_disabled(void)
+{
+	return arch_irqs_disabled_flags(arch_local_save_flags());
+}
+
 static inline unsigned long arch_local_irq_save(void)
 {
 	unsigned long flags;

arch/arm64/kernel/process.c

@@ -123,10 +123,8 @@ void arch_cpu_idle(void)
 	 * This should do all the clock switching and wait for interrupt
 	 * tricks
 	 */
-	trace_cpu_idle_rcuidle(1, smp_processor_id());
 	cpu_do_idle();
 	local_irq_enable();
-	trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
 }
 
 #ifdef CONFIG_HOTPLUG_CPU

arch/mips/include/asm/irqflags.h

@@ -137,6 +137,11 @@ static inline int arch_irqs_disabled_flags(unsigned long flags)
 	return !(flags & 1);
 }
 
+static inline int arch_irqs_disabled(void)
+{
+	return arch_irqs_disabled_flags(arch_local_save_flags());
+}
+
 #endif /* #ifndef __ASSEMBLY__ */
 
 /*

arch/nds32/include/asm/irqflags.h

@@ -34,3 +34,8 @@ static inline int arch_irqs_disabled_flags(unsigned long flags)
 {
 	return !flags;
 }
+
+static inline int arch_irqs_disabled(void)
+{
+	return arch_irqs_disabled_flags(arch_local_save_flags());
+}

arch/powerpc/include/asm/hw_irq.h

@@ -200,17 +200,14 @@ static inline bool arch_irqs_disabled(void)
 #define powerpc_local_irq_pmu_save(flags)			\
 	 do {							\
 		raw_local_irq_pmu_save(flags);			\
-		trace_hardirqs_off();				\
+		if (!raw_irqs_disabled_flags(flags))		\
+			trace_hardirqs_off();			\
 	} while(0)
 #define powerpc_local_irq_pmu_restore(flags)			\
 	do {							\
-		if (raw_irqs_disabled_flags(flags)) {		\
-			raw_local_irq_pmu_restore(flags);	\
-			trace_hardirqs_off();			\
-		} else {					\
+		if (!raw_irqs_disabled_flags(flags))		\
 			trace_hardirqs_on();			\
-			raw_local_irq_pmu_restore(flags);	\
-		}						\
+		raw_local_irq_pmu_restore(flags);		\
 	} while(0)
 #else
 #define powerpc_local_irq_pmu_save(flags)			\

arch/s390/kernel/idle.c

@@ -33,14 +33,13 @@ void enabled_wait(void)
 		PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
 	clear_cpu_flag(CIF_NOHZ_DELAY);
 
-	trace_cpu_idle_rcuidle(1, smp_processor_id());
 	local_irq_save(flags);
 	/* Call the assembler magic in entry.S */
 	psw_idle(idle, psw_mask);
 	local_irq_restore(flags);
-	trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
 
 	/* Account time spent with enabled wait psw loaded as idle time. */
+	/* XXX seqcount has tracepoints that require RCU */
 	write_seqcount_begin(&idle->seqcount);
 	idle_time = idle->clock_idle_exit - idle->clock_idle_enter;
 	idle->clock_idle_enter = idle->clock_idle_exit = 0ULL;

arch/x86/entry/thunk_32.S

@@ -29,11 +29,6 @@ SYM_CODE_START_NOALIGN(\name)
 SYM_CODE_END(\name)
 	.endm
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	THUNK trace_hardirqs_on_thunk,trace_hardirqs_on_caller,1
-	THUNK trace_hardirqs_off_thunk,trace_hardirqs_off_caller,1
-#endif
-
 #ifdef CONFIG_PREEMPTION
 	THUNK preempt_schedule_thunk, preempt_schedule
 	THUNK preempt_schedule_notrace_thunk, preempt_schedule_notrace

arch/x86/include/asm/mmu.h

@@ -59,5 +59,6 @@ typedef struct {
 	}
 
 void leave_mm(int cpu);
+#define leave_mm leave_mm
 
 #endif /* _ASM_X86_MMU_H */

arch/x86/kernel/process.c

@@ -684,9 +684,7 @@ void arch_cpu_idle(void)
  */
 void __cpuidle default_idle(void)
 {
-	trace_cpu_idle_rcuidle(1, smp_processor_id());
 	safe_halt();
-	trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
 }
 #if defined(CONFIG_APM_MODULE) || defined(CONFIG_HALTPOLL_CPUIDLE_MODULE)
 EXPORT_SYMBOL(default_idle);
@@ -792,7 +790,6 @@ static int prefer_mwait_c1_over_halt(const struct cpuinfo_x86 *c)
 static __cpuidle void mwait_idle(void)
 {
 	if (!current_set_polling_and_test()) {
-		trace_cpu_idle_rcuidle(1, smp_processor_id());
 		if (this_cpu_has(X86_BUG_CLFLUSH_MONITOR)) {
 			mb(); /* quirk */
 			clflush((void *)&current_thread_info()->flags);
@@ -804,7 +801,6 @@ static __cpuidle void mwait_idle(void)
 			__sti_mwait(0, 0);
 		else
 			local_irq_enable();
-		trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
 	} else {
 		local_irq_enable();
 	}

arch/x86/mm/tlb.c

@@ -555,21 +555,12 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 		this_cpu_write(cpu_tlbstate.ctxs[new_asid].tlb_gen, next_tlb_gen);
 		load_new_mm_cr3(next->pgd, new_asid, true);
 
-		/*
-		 * NB: This gets called via leave_mm() in the idle path
-		 * where RCU functions differently.  Tracing normally
-		 * uses RCU, so we need to use the _rcuidle variant.
-		 *
-		 * (There is no good reason for this.  The idle code should
-		 *  be rearranged to call this before rcu_idle_enter().)
-		 */
-		trace_tlb_flush_rcuidle(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
+		trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
 	} else {
 		/* The new ASID is already up to date. */
 		load_new_mm_cr3(next->pgd, new_asid, false);
 
-		/* See above wrt _rcuidle. */
-		trace_tlb_flush_rcuidle(TLB_FLUSH_ON_TASK_SWITCH, 0);
+		trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, 0);
 	}
 
 	/* Make sure we write CR3 before loaded_mm. */

drivers/cpuidle/cpuidle.c

@@ -22,6 +22,7 @@
 #include <linux/module.h>
 #include <linux/suspend.h>
 #include <linux/tick.h>
+#include <linux/mmu_context.h>
 #include <trace/events/power.h>
 
 #include "cpuidle.h"
@@ -145,21 +146,24 @@ static void enter_s2idle_proper(struct cpuidle_driver *drv,
 	 * executing it contains RCU usage regarded as invalid in the idle
 	 * context, so tell RCU about that.
 	 */
-	RCU_NONIDLE(tick_freeze());
+	tick_freeze();
 	/*
 	 * The state used here cannot be a "coupled" one, because the "coupled"
 	 * cpuidle mechanism enables interrupts and doing that with timekeeping
 	 * suspended is generally unsafe.
 	 */
 	stop_critical_timings();
+	rcu_idle_enter();
 	drv->states[index].enter_s2idle(dev, drv, index);
-	WARN_ON(!irqs_disabled());
+	if (WARN_ON_ONCE(!irqs_disabled()))
+		local_irq_disable();
 	/*
 	 * timekeeping_resume() that will be called by tick_unfreeze() for the
 	 * first CPU executing it calls functions containing RCU read-side
 	 * critical sections, so tell RCU about that.
 	 */
-	RCU_NONIDLE(tick_unfreeze());
+	rcu_idle_exit();
+	tick_unfreeze();
 	start_critical_timings();
 
 	time_end = ns_to_ktime(local_clock());
@@ -225,19 +229,24 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv,
 		broadcast = false;
 	}
 
+	if (target_state->flags & CPUIDLE_FLAG_TLB_FLUSHED)
+		leave_mm(dev->cpu);
+
 	/* Take note of the planned idle state. */
 	sched_idle_set_state(target_state);
 
-	trace_cpu_idle_rcuidle(index, dev->cpu);
+	trace_cpu_idle(index, dev->cpu);
 	time_start = ns_to_ktime(local_clock());
 
 	stop_critical_timings();
+	rcu_idle_enter();
 	entered_state = target_state->enter(dev, drv, index);
+	rcu_idle_exit();
 	start_critical_timings();
 
 	sched_clock_idle_wakeup_event();
 	time_end = ns_to_ktime(local_clock());
-	trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu);
+	trace_cpu_idle(PWR_EVENT_EXIT, dev->cpu);
 
 	/* The cpu is no longer idle or about to enter idle. */
 	sched_idle_set_state(NULL);

drivers/idle/intel_idle.c

@@ -89,14 +89,6 @@ static unsigned int mwait_substates __initdata;
  */
 #define CPUIDLE_FLAG_ALWAYS_ENABLE	BIT(15)
 
-/*
- * Set this flag for states where the HW flushes the TLB for us
- * and so we don't need cross-calls to keep it consistent.
- * If this flag is set, SW flushes the TLB, so even if the
- * HW doesn't do the flushing, this flag is safe to use.
- */
-#define CPUIDLE_FLAG_TLB_FLUSHED	BIT(16)
-
 /*
  * MWAIT takes an 8-bit "hint" in EAX "suggesting"
  * the C-state (top nibble) and sub-state (bottom nibble)
@@ -131,14 +123,6 @@ static __cpuidle int intel_idle(struct cpuidle_device *dev,
 	unsigned long eax = flg2MWAIT(state->flags);
 	unsigned long ecx = 1; /* break on interrupt flag */
 	bool tick;
-	int cpu = smp_processor_id();
-
-	/*
-	 * leave_mm() to avoid costly and often unnecessary wakeups
-	 * for flushing the user TLB's associated with the active mm.
-	 */
-	if (state->flags & CPUIDLE_FLAG_TLB_FLUSHED)
-		leave_mm(cpu);
 
 	if (!static_cpu_has(X86_FEATURE_ARAT)) {
 		/*

include/linux/cpuidle.h

@@ -75,12 +75,13 @@ struct cpuidle_state {
 };
 
 /* Idle State Flags */
-#define CPUIDLE_FLAG_NONE       (0x00)
-#define CPUIDLE_FLAG_POLLING	BIT(0) /* polling state */
-#define CPUIDLE_FLAG_COUPLED	BIT(1) /* state applies to multiple cpus */
-#define CPUIDLE_FLAG_TIMER_STOP BIT(2) /* timer is stopped on this state */
-#define CPUIDLE_FLAG_UNUSABLE	BIT(3) /* avoid using this state */
-#define CPUIDLE_FLAG_OFF	BIT(4) /* disable this state by default */
+#define CPUIDLE_FLAG_NONE       	(0x00)
+#define CPUIDLE_FLAG_POLLING		BIT(0) /* polling state */
+#define CPUIDLE_FLAG_COUPLED		BIT(1) /* state applies to multiple cpus */
+#define CPUIDLE_FLAG_TIMER_STOP 	BIT(2) /* timer is stopped on this state */
+#define CPUIDLE_FLAG_UNUSABLE		BIT(3) /* avoid using this state */
+#define CPUIDLE_FLAG_OFF		BIT(4) /* disable this state by default */
+#define CPUIDLE_FLAG_TLB_FLUSHED	BIT(5) /* idle-state flushes TLBs */
 
 struct cpuidle_device_kobj;
 struct cpuidle_state_kobj;

include/linux/irqflags.h

@@ -49,17 +49,18 @@ struct irqtrace_events {
 DECLARE_PER_CPU(int, hardirqs_enabled);
 DECLARE_PER_CPU(int, hardirq_context);
 
-  extern void trace_hardirqs_on_prepare(void);
-  extern void trace_hardirqs_off_finish(void);
-  extern void trace_hardirqs_on(void);
-  extern void trace_hardirqs_off(void);
-# define lockdep_hardirq_context()	(this_cpu_read(hardirq_context))
+extern void trace_hardirqs_on_prepare(void);
+extern void trace_hardirqs_off_finish(void);
+extern void trace_hardirqs_on(void);
+extern void trace_hardirqs_off(void);
+
+# define lockdep_hardirq_context()	(raw_cpu_read(hardirq_context))
 # define lockdep_softirq_context(p)	((p)->softirq_context)
 # define lockdep_hardirqs_enabled()	(this_cpu_read(hardirqs_enabled))
 # define lockdep_softirqs_enabled(p)	((p)->softirqs_enabled)
 # define lockdep_hardirq_enter()			\
 do {							\
-	if (this_cpu_inc_return(hardirq_context) == 1)	\
+	if (__this_cpu_inc_return(hardirq_context) == 1)\
 		current->hardirq_threaded = 0;		\
 } while (0)
 # define lockdep_hardirq_threaded()		\
@@ -68,7 +69,7 @@ do {						\
 } while (0)
 # define lockdep_hardirq_exit()			\
 do {						\
-	this_cpu_dec(hardirq_context);		\
+	__this_cpu_dec(hardirq_context);	\
 } while (0)
 # define lockdep_softirq_enter()		\
 do {						\
@@ -120,17 +121,17 @@ do {						\
 #else
 # define trace_hardirqs_on_prepare()		do { } while (0)
 # define trace_hardirqs_off_finish()		do { } while (0)
-# define trace_hardirqs_on()		do { } while (0)
-# define trace_hardirqs_off()		do { } while (0)
-# define lockdep_hardirq_context()	0
-# define lockdep_softirq_context(p)	0
-# define lockdep_hardirqs_enabled()	0
-# define lockdep_softirqs_enabled(p)	0
-# define lockdep_hardirq_enter()	do { } while (0)
-# define lockdep_hardirq_threaded()	do { } while (0)
-# define lockdep_hardirq_exit()		do { } while (0)
-# define lockdep_softirq_enter()	do { } while (0)
-# define lockdep_softirq_exit()		do { } while (0)
+# define trace_hardirqs_on()			do { } while (0)
+# define trace_hardirqs_off()			do { } while (0)
+# define lockdep_hardirq_context()		0
+# define lockdep_softirq_context(p)		0
+# define lockdep_hardirqs_enabled()		0
+# define lockdep_softirqs_enabled(p)		0
+# define lockdep_hardirq_enter()		do { } while (0)
+# define lockdep_hardirq_threaded()		do { } while (0)
+# define lockdep_hardirq_exit()			do { } while (0)
+# define lockdep_softirq_enter()		do { } while (0)
+# define lockdep_softirq_exit()			do { } while (0)
 # define lockdep_hrtimer_enter(__hrtimer)	false
 # define lockdep_hrtimer_exit(__context)	do { } while (0)
 # define lockdep_posixtimer_enter()		do { } while (0)
@@ -181,26 +182,33 @@ do {						\
  * if !TRACE_IRQFLAGS.
  */
 #ifdef CONFIG_TRACE_IRQFLAGS
-#define local_irq_enable() \
-	do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0)
-#define local_irq_disable() \
-	do { raw_local_irq_disable(); trace_hardirqs_off(); } while (0)
+
+#define local_irq_enable()				\
+	do {						\
+		trace_hardirqs_on();			\
+		raw_local_irq_enable();			\
+	} while (0)
+
+#define local_irq_disable()				\
+	do {						\
+		bool was_disabled = raw_irqs_disabled();\
+		raw_local_irq_disable();		\
+		if (!was_disabled)			\
+			trace_hardirqs_off();		\
+	} while (0)
+
 #define local_irq_save(flags)				\
 	do {						\
 		raw_local_irq_save(flags);		\
-		trace_hardirqs_off();			\
+		if (!raw_irqs_disabled_flags(flags))	\
+			trace_hardirqs_off();		\
 	} while (0)
 
-
 #define local_irq_restore(flags)			\
 	do {						\
-		if (raw_irqs_disabled_flags(flags)) {	\
-			raw_local_irq_restore(flags);	\
-			trace_hardirqs_off();		\
-		} else {				\
+		if (!raw_irqs_disabled_flags(flags))	\
 			trace_hardirqs_on();		\
-			raw_local_irq_restore(flags);	\
-		}					\
+		raw_local_irq_restore(flags);		\
 	} while (0)
 
 #define safe_halt()				\
@@ -214,10 +222,7 @@ do {						\
 
 #define local_irq_enable()	do { raw_local_irq_enable(); } while (0)
 #define local_irq_disable()	do { raw_local_irq_disable(); } while (0)
-#define local_irq_save(flags)					\
-	do {							\
-		raw_local_irq_save(flags);			\
-	} while (0)
+#define local_irq_save(flags)	do { raw_local_irq_save(flags); } while (0)
 #define local_irq_restore(flags) do { raw_local_irq_restore(flags); } while (0)
 #define safe_halt()		do { raw_safe_halt(); } while (0)