Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR. Conflicts: tools/testing/selftests/net/fcnal-test.sh d7a2fc1 ("selftests: net: fcnal-test: check if FIPS mode is enabled") dd017c7 ("selftests: fcnal: Test SO_DONTROUTE on TCP sockets.") https://lore.kernel.org/all/[email protected]/ https://lore.kernel.org/all/[email protected]/ No adjacent changes. Signed-off-by: Jakub Kicinski <[email protected]>
chewitt · Jun 23, 2023 · a7384f3 · a7384f3
2 parents 98e9587 + 8a28a0b
commit a7384f3
Show file tree

Hide file tree

Showing 226 changed files with 3,201 additions and 1,156 deletions.
diff --git a/.mailmap b/.mailmap
@@ -70,6 +70,8 @@ Baolin Wang <[email protected]> <[email protected]>
 Baolin Wang <[email protected]> <[email protected]>
 Bart Van Assche <[email protected]> <[email protected]>
 Bart Van Assche <[email protected]> <[email protected]>
+Ben Dooks <[email protected]> <[email protected]>
+Ben Dooks <[email protected]> <[email protected]>
 Ben Gardner <[email protected]>
 Ben M Cahill <[email protected]>
 Ben Widawsky <[email protected]> <[email protected]>

diff --git a/Documentation/riscv/patch-acceptance.rst b/Documentation/riscv/patch-acceptance.rst
@@ -16,6 +16,24 @@ tested code over experimental code.  We wish to extend these same
 principles to the RISC-V-related code that will be accepted for
 inclusion in the kernel.
 
+Patchwork
+---------
+
+RISC-V has a patchwork instance, where the status of patches can be checked:
+
+  https://patchwork.kernel.org/project/linux-riscv/list/
+
+If your patch does not appear in the default view, the RISC-V maintainers have
+likely either requested changes, or expect it to be applied to another tree.
+
+Automation runs against this patchwork instance, building/testing patches as
+they arrive. The automation applies patches against the current HEAD of the
+RISC-V `for-next` and `fixes` branches, depending on whether the patch has been
+detected as a fix. Failing those, it will use the RISC-V `master` branch.
+The exact commit to which a series has been applied will be noted on patchwork.
+Patches for which any of the checks fail are unlikely to be applied and in most
+cases will need to be resubmitted.
+
 Submit Checklist Addendum
 -------------------------
 We'll only accept patches for new modules or extensions if the

diff --git a/Documentation/trace/user_events.rst b/Documentation/trace/user_events.rst
@@ -14,10 +14,6 @@ Programs can view status of the events via
 /sys/kernel/tracing/user_events_status and can both register and write
 data out via /sys/kernel/tracing/user_events_data.
 
-Programs can also use /sys/kernel/tracing/dynamic_events to register and
-delete user based events via the u: prefix. The format of the command to
-dynamic_events is the same as the ioctl with the u: prefix applied.
-
 Typically programs will register a set of events that they wish to expose to
 tools that can read trace_events (such as ftrace and perf). The registration
 process tells the kernel which address and bit to reflect if any tool has
@@ -144,6 +140,9 @@ its name. Delete will only succeed if there are no references left to the
 event (in both user and kernel space). User programs should use a separate file
 to request deletes than the one used for registration due to this.
 
+**NOTE:** By default events will auto-delete when there are no references left
+to the event. Flags in the future may change this logic.
+
 Unregistering
 -------------
 If after registering an event it is no longer wanted to be updated then it can

diff --git a/MAINTAINERS b/MAINTAINERS
@@ -9971,8 +9971,9 @@ M:	Miquel Raynal <[email protected]>
 L:	[email protected]
 S:	Maintained
 W:	https://linux-wpan.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next.git
+Q:	https://patchwork.kernel.org/project/linux-wpan/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan-next.git
 F:	Documentation/networking/ieee802154.rst
 F:	drivers/net/ieee802154/
 F:	include/linux/ieee802154.h
@@ -13283,10 +13284,11 @@ F:	drivers/memory/mtk-smi.c
 F:	include/soc/mediatek/smi.h
 
 MEDIATEK SWITCH DRIVER
-M:	Sean Wang <[email protected]>
+M:	Arınç ÜNAL <[email protected]>
+M:	Daniel Golle <[email protected]>
 M:	Landen Chao <[email protected]>
 M:	DENG Qingfang <[email protected]>
-M:	Daniel Golle <[email protected]>
+M:	Sean Wang <[email protected]>
 L:	[email protected]
 S:	Maintained
 F:	drivers/net/dsa/mt7530-mdio.c
@@ -16399,7 +16401,7 @@ F:	Documentation/devicetree/bindings/pci/intel,keembay-pcie*
 F:	drivers/pci/controller/dwc/pcie-keembay.c
 
 PCIE DRIVER FOR INTEL LGM GW SOC
-M:	Rahul Tanwar <rtanwar@maxlinear.com>
+M:	Chuanhua Lei <lchuanhua@maxlinear.com>
 L:	[email protected]
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
@@ -17842,7 +17844,7 @@ F:	tools/testing/selftests/rtc/
 Real-time Linux Analysis (RTLA) tools
 M:	Daniel Bristot de Oliveira <[email protected]>
 M:	Steven Rostedt <[email protected]>
-L:	linux-trace-devel@vger.kernel.org
+L:	linux-trace-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/tools/rtla/
 F:	tools/tracing/rtla/
@@ -18412,7 +18414,7 @@ F:	drivers/infiniband/ulp/rtrs/
 RUNTIME VERIFICATION (RV)
 M:	Daniel Bristot de Oliveira <[email protected]>
 M:	Steven Rostedt <[email protected]>
-L:	linux-trace-devel@vger.kernel.org
+L:	linux-trace-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/trace/rv/
 F:	include/linux/rv.h

diff --git a/Makefile b/Makefile
@@ -2,7 +2,7 @@
 VERSION = 6
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Hurr durr I'ma ninja sloth
 
 # *DOCUMENTATION*

diff --git a/arch/arm/include/asm/arm_pmuv3.h b/arch/arm/include/asm/arm_pmuv3.h
@@ -222,6 +222,11 @@ static inline bool kvm_pmu_counter_deferred(struct perf_event_attr *attr)
 	return false;
 }
 
+static inline bool kvm_set_pmuserenr(u64 val)
+{
+	return false;
+}
+
 /* PMU Version in DFR Register */
 #define ARMV8_PMU_DFR_VER_NI        0
 #define ARMV8_PMU_DFR_VER_V3P4      0x5

diff --git a/arch/arm64/hyperv/mshyperv.c b/arch/arm64/hyperv/mshyperv.c
@@ -67,7 +67,7 @@ static int __init hyperv_init(void)
 	if (ret)
 		return ret;
 
-	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "arm64/hyperv_init:online",
+	ret = cpuhp_setup_state(CPUHP_AP_HYPERV_ONLINE, "arm64/hyperv_init:online",
 				hv_common_cpu_init, hv_common_cpu_die);
 	if (ret < 0) {
 		hv_common_free();

diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
@@ -699,6 +699,8 @@ struct kvm_vcpu_arch {
 #define SYSREGS_ON_CPU		__vcpu_single_flag(sflags, BIT(4))
 /* Software step state is Active-pending */
 #define DBG_SS_ACTIVE_PENDING	__vcpu_single_flag(sflags, BIT(5))
+/* PMUSERENR for the guest EL0 is on physical CPU */
+#define PMUSERENR_ON_CPU	__vcpu_single_flag(sflags, BIT(6))
 
 
 /* Pointer to the vcpu's SVE FFR for sve_{save,load}_state() */
@@ -1065,9 +1067,14 @@ void kvm_arch_vcpu_put_debug_state_flags(struct kvm_vcpu *vcpu);
 #ifdef CONFIG_KVM
 void kvm_set_pmu_events(u32 set, struct perf_event_attr *attr);
 void kvm_clr_pmu_events(u32 clr);
+bool kvm_set_pmuserenr(u64 val);
 #else
 static inline void kvm_set_pmu_events(u32 set, struct perf_event_attr *attr) {}
 static inline void kvm_clr_pmu_events(u32 clr) {}
+static inline bool kvm_set_pmuserenr(u64 val)
+{
+	return false;
+}
 #endif
 
 void kvm_vcpu_load_sysregs_vhe(struct kvm_vcpu *vcpu);

diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h
@@ -82,8 +82,14 @@ static inline void __activate_traps_common(struct kvm_vcpu *vcpu)
 	 * EL1 instead of being trapped to EL2.
 	 */
 	if (kvm_arm_support_pmu_v3()) {
+		struct kvm_cpu_context *hctxt;
+
 		write_sysreg(0, pmselr_el0);
+
+		hctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+		ctxt_sys_reg(hctxt, PMUSERENR_EL0) = read_sysreg(pmuserenr_el0);
 		write_sysreg(ARMV8_PMU_USERENR_MASK, pmuserenr_el0);
+		vcpu_set_flag(vcpu, PMUSERENR_ON_CPU);
 	}
 
 	vcpu->arch.mdcr_el2_host = read_sysreg(mdcr_el2);
@@ -106,8 +112,13 @@ static inline void __deactivate_traps_common(struct kvm_vcpu *vcpu)
 	write_sysreg(vcpu->arch.mdcr_el2_host, mdcr_el2);
 
 	write_sysreg(0, hstr_el2);
-	if (kvm_arm_support_pmu_v3())
-		write_sysreg(0, pmuserenr_el0);
+	if (kvm_arm_support_pmu_v3()) {
+		struct kvm_cpu_context *hctxt;
+
+		hctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+		write_sysreg(ctxt_sys_reg(hctxt, PMUSERENR_EL0), pmuserenr_el0);
+		vcpu_clear_flag(vcpu, PMUSERENR_ON_CPU);
+	}
 
 	if (cpus_have_final_cap(ARM64_SME)) {
 		sysreg_clear_set_s(SYS_HFGRTR_EL2, 0,

diff --git a/arch/arm64/kvm/hyp/vhe/switch.c b/arch/arm64/kvm/hyp/vhe/switch.c
@@ -92,14 +92,28 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu)
 }
 NOKPROBE_SYMBOL(__deactivate_traps);
 
+/*
+ * Disable IRQs in {activate,deactivate}_traps_vhe_{load,put}() to
+ * prevent a race condition between context switching of PMUSERENR_EL0
+ * in __{activate,deactivate}_traps_common() and IPIs that attempts to
+ * update PMUSERENR_EL0. See also kvm_set_pmuserenr().
+ */
 void activate_traps_vhe_load(struct kvm_vcpu *vcpu)
 {
+	unsigned long flags;
+
+	local_irq_save(flags);
 	__activate_traps_common(vcpu);
+	local_irq_restore(flags);
 }
 
 void deactivate_traps_vhe_put(struct kvm_vcpu *vcpu)
 {
+	unsigned long flags;
+
+	local_irq_save(flags);
 	__deactivate_traps_common(vcpu);
+	local_irq_restore(flags);
 }
 
 static const exit_handler_fn hyp_exit_handlers[] = {

diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c
@@ -700,7 +700,25 @@ static struct arm_pmu *kvm_pmu_probe_armpmu(void)
 
 	mutex_lock(&arm_pmus_lock);
 
-	cpu = smp_processor_id();
+	/*
+	 * It is safe to use a stale cpu to iterate the list of PMUs so long as
+	 * the same value is used for the entirety of the loop. Given this, and
+	 * the fact that no percpu data is used for the lookup there is no need
+	 * to disable preemption.
+	 *
+	 * It is still necessary to get a valid cpu, though, to probe for the
+	 * default PMU instance as userspace is not required to specify a PMU
+	 * type. In order to uphold the preexisting behavior KVM selects the
+	 * PMU instance for the core where the first call to the
+	 * KVM_ARM_VCPU_PMU_V3_CTRL attribute group occurs. A dependent use case
+	 * would be a user with disdain of all things big.LITTLE that affines
+	 * the VMM to a particular cluster of cores.
+	 *
+	 * In any case, userspace should just do the sane thing and use the UAPI
+	 * to select a PMU type directly. But, be wary of the baggage being
+	 * carried here.
+	 */
+	cpu = raw_smp_processor_id();
 	list_for_each_entry(entry, &arm_pmus, entry) {
 		tmp = entry->arm_pmu;
 

diff --git a/arch/arm64/kvm/pmu.c b/arch/arm64/kvm/pmu.c
@@ -209,3 +209,30 @@ void kvm_vcpu_pmu_restore_host(struct kvm_vcpu *vcpu)
 	kvm_vcpu_pmu_enable_el0(events_host);
 	kvm_vcpu_pmu_disable_el0(events_guest);
 }
+
+/*
+ * With VHE, keep track of the PMUSERENR_EL0 value for the host EL0 on the pCPU
+ * where PMUSERENR_EL0 for the guest is loaded, since PMUSERENR_EL0 is switched
+ * to the value for the guest on vcpu_load().  The value for the host EL0
+ * will be restored on vcpu_put(), before returning to userspace.
+ * This isn't necessary for nVHE, as the register is context switched for
+ * every guest enter/exit.
+ *
+ * Return true if KVM takes care of the register. Otherwise return false.
+ */
+bool kvm_set_pmuserenr(u64 val)
+{
+	struct kvm_cpu_context *hctxt;
+	struct kvm_vcpu *vcpu;
+
+	if (!kvm_arm_support_pmu_v3() || !has_vhe())
+		return false;
+
+	vcpu = kvm_get_running_vcpu();
+	if (!vcpu || !vcpu_get_flag(vcpu, PMUSERENR_ON_CPU))
+		return false;
+
+	hctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+	ctxt_sys_reg(hctxt, PMUSERENR_EL0) = val;
+	return true;
+}
diff --git a/arch/arm64/kvm/vgic/vgic-init.c b/arch/arm64/kvm/vgic/vgic-init.c
@@ -446,6 +446,7 @@ int vgic_lazy_init(struct kvm *kvm)
 int kvm_vgic_map_resources(struct kvm *kvm)
 {
 	struct vgic_dist *dist = &kvm->arch.vgic;
+	enum vgic_type type;
 	gpa_t dist_base;
 	int ret = 0;
 
@@ -460,10 +461,13 @@ int kvm_vgic_map_resources(struct kvm *kvm)
 	if (!irqchip_in_kernel(kvm))
 		goto out;
 
-	if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2)
+	if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2) {
 		ret = vgic_v2_map_resources(kvm);
-	else
+		type = VGIC_V2;
+	} else {
 		ret = vgic_v3_map_resources(kvm);
+		type = VGIC_V3;
+	}
 
 	if (ret) {
 		__kvm_vgic_destroy(kvm);
@@ -473,8 +477,7 @@ int kvm_vgic_map_resources(struct kvm *kvm)
 	dist_base = dist->vgic_dist_base;
 	mutex_unlock(&kvm->arch.config_lock);
 
-	ret = vgic_register_dist_iodev(kvm, dist_base,
-				       kvm_vgic_global_state.type);
+	ret = vgic_register_dist_iodev(kvm, dist_base, type);
 	if (ret) {
 		kvm_err("Unable to register VGIC dist MMIO regions\n");
 		kvm_vgic_destroy(kvm);

diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h
@@ -90,10 +90,6 @@
 #include <asm/asmregs.h>
 #include <asm/psw.h>
 
-	sp	=	30
-	gp	=	27
-	ipsw	=	22
-
 	/*
 	 * We provide two versions of each macro to convert from physical
 	 * to virtual and vice versa. The "_r1" versions take one argument

diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c
@@ -795,12 +795,20 @@ void exit_lazy_flush_tlb(struct mm_struct *mm, bool always_flush)
 		goto out;
 
 	if (current->active_mm == mm) {
+		unsigned long flags;
+
 		WARN_ON_ONCE(current->mm != NULL);
-		/* Is a kernel thread and is using mm as the lazy tlb */
+		/*
+		 * It is a kernel thread and is using mm as the lazy tlb, so
+		 * switch it to init_mm. This is not always called from IPI
+		 * (e.g., flush_type_needed), so must disable irqs.
+		 */
+		local_irq_save(flags);
 		mmgrab_lazy_tlb(&init_mm);
 		current->active_mm = &init_mm;
 		switch_mm_irqs_off(mm, &init_mm, current);
 		mmdrop_lazy_tlb(mm);
+		local_irq_restore(flags);
 	}
 
 	/*

diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
@@ -416,7 +416,7 @@ void __init hyperv_init(void)
 			goto free_vp_assist_page;
 	}
 
-	cpuhp = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/hyperv_init:online",
+	cpuhp = cpuhp_setup_state(CPUHP_AP_HYPERV_ONLINE, "x86/hyperv_init:online",
 				  hv_cpu_init, hv_cpu_die);
 	if (cpuhp < 0)
 		goto free_ghcb_page;

diff --git a/arch/x86/hyperv/hv_vtl.c b/arch/x86/hyperv/hv_vtl.c
@@ -20,6 +20,8 @@ void __init hv_vtl_init_platform(void)
 {
 	pr_info("Linux runs in Hyper-V Virtual Trust Level\n");
 
+	x86_platform.realmode_reserve = x86_init_noop;
+	x86_platform.realmode_init = x86_init_noop;
 	x86_init.irqs.pre_vector_init = x86_init_noop;
 	x86_init.timers.timer_init = x86_init_noop;
 

diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
@@ -2570,7 +2570,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	}
 
 	if (bpf_jit_enable > 1)
-		bpf_jit_dump(prog->len, proglen, pass + 1, image);
+		bpf_jit_dump(prog->len, proglen, pass + 1, rw_image);
 
 	if (image) {
 		if (!prog->is_func || extra_pass) {