Merge tag 'v5.7-rc7' into efi/core, to refresh the branch and pick up…

… fixes

Signed-off-by: Ingo Molnar <[email protected]>

.clang-format

@@ -142,10 +142,13 @@ ForEachMacros:
   - 'for_each_card_auxs'
   - 'for_each_card_auxs_safe'
   - 'for_each_card_components'
+  - 'for_each_card_dapms'
   - 'for_each_card_pre_auxs'
   - 'for_each_card_prelinks'
   - 'for_each_card_rtds'
   - 'for_each_card_rtds_safe'
+  - 'for_each_card_widgets'
+  - 'for_each_card_widgets_safe'
   - 'for_each_cgroup_storage_type'
   - 'for_each_child_of_node'
   - 'for_each_clear_bit'
@@ -160,6 +163,7 @@ ForEachMacros:
   - 'for_each_cpu_and'
   - 'for_each_cpu_not'
   - 'for_each_cpu_wrap'
+  - 'for_each_dapm_widgets'
   - 'for_each_dev_addr'
   - 'for_each_dev_scope'
   - 'for_each_displayid_db'
@@ -170,7 +174,6 @@ ForEachMacros:
   - 'for_each_dpcm_fe'
   - 'for_each_drhd_unit'
   - 'for_each_dss_dev'
-  - 'for_each_efi_handle'
   - 'for_each_efi_memory_desc'
   - 'for_each_efi_memory_desc_in_map'
   - 'for_each_element'
@@ -191,6 +194,7 @@ ForEachMacros:
   - 'for_each_ip_tunnel_rcu'
   - 'for_each_irq_nr'
   - 'for_each_link_codecs'
+  - 'for_each_link_cpus'
   - 'for_each_link_platforms'
   - 'for_each_lru'
   - 'for_each_matching_node'
@@ -250,6 +254,7 @@ ForEachMacros:
   - 'for_each_pci_bridge'
   - 'for_each_pci_dev'
   - 'for_each_pci_msi_entry'
+  - 'for_each_pcm_streams'
   - 'for_each_populated_zone'
   - 'for_each_possible_cpu'
   - 'for_each_present_cpu'
@@ -260,9 +265,12 @@ ForEachMacros:
   - 'for_each_property_of_node'
   - 'for_each_registered_fb'
   - 'for_each_reserved_mem_region'
-  - 'for_each_rtd_codec_dai'
-  - 'for_each_rtd_codec_dai_rollback'
+  - 'for_each_rtd_codec_dais'
+  - 'for_each_rtd_codec_dais_rollback'
   - 'for_each_rtd_components'
+  - 'for_each_rtd_cpu_dais'
+  - 'for_each_rtd_cpu_dais_rollback'
+  - 'for_each_rtd_dais'
   - 'for_each_set_bit'
   - 'for_each_set_bit_from'
   - 'for_each_set_clump8'
@@ -334,6 +342,7 @@ ForEachMacros:
   - 'klp_for_each_object'
   - 'klp_for_each_object_safe'
   - 'klp_for_each_object_static'
+  - 'kunit_suite_for_each_test_case'
   - 'kvm_for_each_memslot'
   - 'kvm_for_each_vcpu'
   - 'list_for_each'
@@ -387,6 +396,7 @@ ForEachMacros:
   - 'of_property_for_each_string'
   - 'of_property_for_each_u32'
   - 'pci_bus_for_each_resource'
+  - 'pcm_for_each_format'
   - 'ping_portaddr_for_each_entry'
   - 'plist_for_each'
   - 'plist_for_each_continue'
@@ -482,7 +492,7 @@ KeepEmptyLinesAtTheStartOfBlocks: false
 MacroBlockBegin: ''
 MacroBlockEnd: ''
 MaxEmptyLinesToKeep: 1
-NamespaceIndentation: Inner
+NamespaceIndentation: None
 #ObjCBinPackProtocolList: Auto # Unknown to clang-format-5.0
 ObjCBlockIndentWidth: 8
 ObjCSpaceAfterProperty: true

.mailmap

@@ -288,6 +288,8 @@ Vladimir Davydov <[email protected]> <[email protected]>
 Vladimir Davydov <[email protected]> <[email protected]>
 Takashi YOSHII <[email protected]>
 Will Deacon <[email protected]> <[email protected]>
+Wolfram Sang <[email protected]> <[email protected]>
+Wolfram Sang <[email protected]> <[email protected]>
 Yakir Yang <[email protected]> <[email protected]>
 Yusuke Goda <[email protected]>
 Gustavo Padovan <[email protected]>

Documentation/admin-guide/device-mapper/dm-integrity.rst

@@ -182,12 +182,15 @@ fix_padding
 	space-efficient. If this option is not present, large padding is
 	used - that is for compatibility with older kernels.
 
-
-The journal mode (D/J), buffer_sectors, journal_watermark, commit_time can
-be changed when reloading the target (load an inactive table and swap the
-tables with suspend and resume). The other arguments should not be changed
-when reloading the target because the layout of disk data depend on them
-and the reloaded target would be non-functional.
+allow_discards
+	Allow block discard requests (a.k.a. TRIM) for the integrity device.
+	Discards are only allowed to devices using internal hash.
+
+The journal mode (D/J), buffer_sectors, journal_watermark, commit_time and
+allow_discards can be changed when reloading the target (load an inactive
+table and swap the tables with suspend and resume). The other arguments
+should not be changed when reloading the target because the layout of disk
+data depend on them and the reloaded target would be non-functional.
 
 
 The layout of the formatted block device:

Documentation/admin-guide/kernel-parameters.txt

@@ -5187,8 +5187,7 @@
 
 	usbcore.old_scheme_first=
 			[USB] Start with the old device initialization
-			scheme,  applies only to low and full-speed devices
-			 (default 0 = off).
+			scheme (default 0 = off).
 
 	usbcore.usbfs_memory_mb=
 			[USB] Memory limit (in MB) for buffers allocated by

Documentation/arm64/amu.rst

@@ -23,13 +23,14 @@ optional external memory-mapped interface.
 
 Version 1 of the Activity Monitors architecture implements a counter group
 of four fixed and architecturally defined 64-bit event counters.
-  - CPU cycle counter: increments at the frequency of the CPU.
-  - Constant counter: increments at the fixed frequency of the system
-    clock.
-  - Instructions retired: increments with every architecturally executed
-    instruction.
-  - Memory stall cycles: counts instruction dispatch stall cycles caused by
-    misses in the last level cache within the clock domain.
+
+- CPU cycle counter: increments at the frequency of the CPU.
+- Constant counter: increments at the fixed frequency of the system
+  clock.
+- Instructions retired: increments with every architecturally executed
+  instruction.
+- Memory stall cycles: counts instruction dispatch stall cycles caused by
+  misses in the last level cache within the clock domain.
 
 When in WFI or WFE these counters do not increment.
 
@@ -57,11 +58,12 @@ counters, only the presence of the extension.
 
 Firmware (code running at higher exception levels, e.g. arm-tf) support is
 needed to:
- - Enable access for lower exception levels (EL2 and EL1) to the AMU
-   registers.
- - Enable the counters. If not enabled these will read as 0.
- - Save/restore the counters before/after the CPU is being put/brought up
-   from the 'off' power state.
+
+- Enable access for lower exception levels (EL2 and EL1) to the AMU
+  registers.
+- Enable the counters. If not enabled these will read as 0.
+- Save/restore the counters before/after the CPU is being put/brought up
+  from the 'off' power state.
 
 When using kernels that have this feature enabled but boot with broken
 firmware the user may experience panics or lockups when accessing the
@@ -78,10 +80,11 @@ are not trapped in EL2/EL3.
 
 The fixed counters of AMUv1 are accessible though the following system
 register definitions:
- - SYS_AMEVCNTR0_CORE_EL0
- - SYS_AMEVCNTR0_CONST_EL0
- - SYS_AMEVCNTR0_INST_RET_EL0
- - SYS_AMEVCNTR0_MEM_STALL_EL0
+
+- SYS_AMEVCNTR0_CORE_EL0
+- SYS_AMEVCNTR0_CONST_EL0
+- SYS_AMEVCNTR0_INST_RET_EL0
+- SYS_AMEVCNTR0_MEM_STALL_EL0
 
 Auxiliary platform specific counters can be accessed using
 SYS_AMEVCNTR1_EL0(n), where n is a value between 0 and 15.
@@ -93,9 +96,10 @@ Userspace access
 ----------------
 
 Currently, access from userspace to the AMU registers is disabled due to:
- - Security reasons: they might expose information about code executed in
-   secure mode.
- - Purpose: AMU counters are intended for system management use.
+
+- Security reasons: they might expose information about code executed in
+  secure mode.
+- Purpose: AMU counters are intended for system management use.
 
 Also, the presence of the feature is not visible to userspace.
 
@@ -105,8 +109,9 @@ Virtualization
 
 Currently, access from userspace (EL0) and kernelspace (EL1) on the KVM
 guest side is disabled due to:
- - Security reasons: they might expose information about code executed
-   by other guests or the host.
+
+- Security reasons: they might expose information about code executed
+  by other guests or the host.
 
 Any attempt to access the AMU registers will result in an UNDEFINED
 exception being injected into the guest.

Documentation/core-api/printk-formats.rst

@@ -112,6 +112,20 @@ used when printing stack backtraces. The specifier takes into
 consideration the effect of compiler optimisations which may occur
 when tail-calls are used and marked with the noreturn GCC attribute.
 
+Probed Pointers from BPF / tracing
+----------------------------------
+
+::
+
+	%pks	kernel string
+	%pus	user string
+
+The ``k`` and ``u`` specifiers are used for printing prior probed memory from
+either kernel memory (k) or user memory (u). The subsequent ``s`` specifier
+results in printing a string. For direct use in regular vsnprintf() the (k)
+and (u) annotation is ignored, however, when used out of BPF's bpf_trace_printk(),
+for example, it reads the memory it is pointing to without faulting.
+
 Kernel Pointers
 ---------------
 

Documentation/devicetree/bindings/Makefile

@@ -2,6 +2,7 @@
 DT_DOC_CHECKER ?= dt-doc-validate
 DT_EXTRACT_EX ?= dt-extract-example
 DT_MK_SCHEMA ?= dt-mk-schema
+DT_MK_SCHEMA_USERONLY_FLAG := $(if $(DT_SCHEMA_FILES), -u)
 
 quiet_cmd_chk_binding = CHKDT   $(patsubst $(srctree)/%,%,$<)
       cmd_chk_binding = $(DT_DOC_CHECKER) -u $(srctree)/$(src) $< ; \
@@ -13,16 +14,18 @@ $(obj)/%.example.dts: $(src)/%.yaml FORCE
 # Use full schemas when checking %.example.dts
 DT_TMP_SCHEMA := $(obj)/processed-schema-examples.yaml
 
+find_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
+		-name 'processed-schema*' ! \
+		-name '*.example.dt.yaml' \)
+
 quiet_cmd_mk_schema = SCHEMA  $@
-      cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(real-prereqs)
+      cmd_mk_schema = rm -f $@ ; \
+                      $(if $(DT_MK_SCHEMA_FLAGS), \
+                           echo $(real-prereqs), \
+                           $(find_cmd)) | \
+                      xargs $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) >> $@
 
-DT_DOCS = $(addprefix $(src)/, \
-	$(shell \
-	cd $(srctree)/$(src) && \
-	find * \( -name '*.yaml' ! \
-		-name 'processed-schema*' ! \
-		-name '*.example.dt.yaml' \) \
-	))
+DT_DOCS = $(shell $(find_cmd) | sed -e 's|^$(srctree)/||')
 
 DT_SCHEMA_FILES ?= $(DT_DOCS)
 
@@ -37,7 +40,7 @@ override DTC_FLAGS := \
 $(obj)/processed-schema-examples.yaml: $(DT_DOCS) FORCE
 	$(call if_changed,mk_schema)
 
-$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := -u
+$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := $(DT_MK_SCHEMA_USERONLY_FLAG)
 $(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) FORCE
 	$(call if_changed,mk_schema)
 

Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml

@@ -37,7 +37,6 @@ examples:
     dsi {
         #address-cells = <1>;
         #size-cells = <0>;
-        reg = <0xff450000 0x1000>;
 
         panel@0 {
             compatible = "leadtek,ltk500hd1829";

Documentation/devicetree/bindings/display/panel/lvds.yaml

@@ -96,12 +96,20 @@ properties:
       If set, reverse the bit order described in the data mappings below on all
       data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
 
+  port: true
+  ports: true
+
 required:
   - compatible
   - data-mapping
   - width-mm
   - height-mm
   - panel-timing
-  - port
+
+oneOf:
+  - required:
+      - port
+  - required:
+      - ports
 
 ...

Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml

@@ -37,7 +37,6 @@ examples:
     dsi {
         #address-cells = <1>;
         #size-cells = <0>;
-        reg = <0xff450000 0x1000>;
 
         panel@0 {
             compatible = "xinpeng,xpp055c272";

Documentation/devicetree/bindings/dma/fsl-edma.txt

@@ -10,7 +10,8 @@ Required properties:
 - compatible :
 	- "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC
 	- "fsl,imx7ulp-edma" for eDMA2 used similar to that on i.mx7ulp
-	- "fsl,fsl,ls1028a-edma" for eDMA used similar to that on Vybrid vf610 SoC
+	- "fsl,ls1028a-edma" followed by "fsl,vf610-edma" for eDMA used on the
+	  LS1028A SoC.
 - reg : Specifies base physical address(s) and size of the eDMA registers.
 	The 1st region is eDMA control register's address and size.
 	The 2nd and the 3rd regions are programmable channel multiplexing

Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml

@@ -22,9 +22,7 @@ properties:
     const: socionext,uniphier-xdmac
 
   reg:
-    items:
-      - description: XDMAC base register region (offset and length)
-      - description: XDMAC extension register region (offset and length)
+    maxItems: 1
 
   interrupts:
     maxItems: 1
@@ -49,12 +47,13 @@ required:
   - reg
   - interrupts
   - "#dma-cells"
+  - dma-channels
 
 examples:
   - |
     xdmac: dma-controller@5fc10000 {
         compatible = "socionext,uniphier-xdmac";
-        reg = <0x5fc10000 0x1000>, <0x5fc20000 0x800>;
+        reg = <0x5fc10000 0x5300>;
         interrupts = <0 188 4>;
         #dma-cells = <2>;
         dma-channels = <16>;

Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/bindings/iio/adc/st,stm32-adc.yaml#"
+$id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: STMicroelectronics STM32 ADC bindings

Documentation/devicetree/bindings/mfd/st,stpmic1.yaml

@@ -259,8 +259,6 @@ properties:
 
     additionalProperties: false
 
-  additionalProperties: false
-
 additionalProperties: false
 
 required:

Documentation/devicetree/bindings/net/dsa/b53.txt

@@ -110,6 +110,9 @@ Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
 			#size-cells = <0>;
 
 			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				port0@0 {
 					reg = <0>;
 					label = "lan1";