Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/g…

…it/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "We get support for three new 32-bit SoC platforms this time.

  The amount of changes in arch/arm for any of them is miniscule, as all
  the interesting code is in device driver subsystems (irqchip, clk,
  pinctrl, ...) these days.  I'm listing them here, as the addition of
  the Kconfig statement is the main relevant milestone for a new
  platform.  In each case, some drivers are are shared with existing
  platforms, while other drivers are added for v4.7 as well, or come in
  a later release.

   - The Aspeed platform is probably the most interesting one, this is
     what most whitebox servers use as their baseboard management
     controller.  We get support for the very common ast2400 and ast2500
     SoCs.  The OpenBMC project focuses on this chip, and the LWN
     article about their ELC 2016 presentation at

        https://lwn.net/Articles/683320/

     triggered the submission, but the code comes from IBM's OpenPOWER
     team rather than the team at Facebook.  There are still a lot more
     drivers that need to get added over time, and I hope both teams can
     work together on that.

   - OXNAS is an old platform for Network Attached Storage devices from
     Oxford Semiconductor.  There are models with ARM10 (!) and
     ARM11MPCore cores, but for now, we only support the original ARM9
     based versions.  The product lineup was subsequently part of PLX,
     Avago and now the new Broadcom Ltd.

        https://wiki.openwrt.org/doc/hardware/soc/soc.oxnas

     has some more information.

   - V2M-MPS2 is a prototyping platform from ARM for their Cortex-M
     cores and is related to the existing Realview / Versatile Express
     lineup, but without MMU.

     We now support various NOMMU platforms, so adding a new one is
     fairly straightforward.

        http://infocenter.arm.com/help/topic/com.arm.doc.100112_0100_03_en/

     has detailed information about the platform.

  Other noteworthy updates:

   - Work on LPC32xx has resumed, and Vladimir Zapolskiy and Sylvain
     Lemieux are now maintaining the platform.

     This is an older ARM9 based platform from NXP (not Freescale), but
     it remains in use in embedded markets.

   - Kevin Hilman is now co-maintaining the Amlogic Meson platform for
     both 32-bit and 64-bit ARM, and started contributing some patches.

   - As is often the case, work on the OMAP platforms makes up the bulk
     of the actual SoC code changes in arch/arm, but there isn't a lot
     of that either"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
  MAINTAINERS: ARM/Amlogic: add co-maintainer, misc. updates
  MAINTAINERS: add ARM/NXP LPC32XX SoC specific drivers to the section
  MAINTAINERS: add new maintainers of NXP LPC32xx SoC
  MAINTAINERS: move ARM/NXP LPC32xx record to ARM section
  arm: Add Aspeed machine
  ARM: lpc32xx: remove duplicate const on lpc32xx_auxdata_lookup
  ARM: lpc32xx: remove leftovers of legacy clock source and provider drivers
  ARM: lpc32xx: remove reboot header file
  ARM: dove: Remove CLK_IS_ROOT
  ARM: orion5x: Remove CLK_IS_ROOT
  ARM: mv78xx0: Remove CLK_IS_ROOT
  ARM: davinci: da850: use clk->set_parent for async3
  ARM: davinci: Move clock init after ioremap.
  MAINTAINERS: Update ARM Versatile Express platform entry
  ARM: vexpress/mps2: introduce MPS2 platform
  MAINTAINERS: add maintainer entry for ARM/OXNAS platform
  ARM: Add new mach-oxnas
  irqchip: versatile-fpga: add new compatible for OX810SE SoC
  ARM: uniphier: correct the call order of of_node_put()
  MAINTAINERS: fix stale TI DaVinci entries
  ...

Documentation/devicetree/bindings/arm/atmel-at91.txt

@@ -41,6 +41,10 @@ compatible: must be one of:
        - "atmel,sama5d43"
        - "atmel,sama5d44"
 
+Chipid required properties:
+- compatible: Should be "atmel,sama5d2-chipid"
+- reg : Should contain registers location and length
+
 PIT Timer required properties:
 - compatible: Should be "atmel,at91sam9260-pit"
 - reg: Should contain registers location and length

MAINTAINERS

@@ -949,12 +949,15 @@ F:	drivers/clk/sunxi/
 
 ARM/Amlogic Meson SoC support
 M:	Carlo Caione <[email protected]>
+M:	Kevin Hilman <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
-L:	linux-[email protected]
+L:	linux-[email protected]
 W:	http://linux-meson.com/
 S:	Maintained
 F:	arch/arm/mach-meson/
 F:	arch/arm/boot/dts/meson*
+F:	arch/arm64/boot/dts/amlogic/
+F: 	drivers/pinctrl/meson/
 N:	meson
 
 ARM/Annapurna Labs ALPINE ARCHITECTURE
@@ -976,6 +979,13 @@ F:	arch/arm/mach-artpec
 F:	arch/arm/boot/dts/artpec6*
 F:	drivers/clk/clk-artpec6.c
 
+ARM/ASPEED MACHINE SUPPORT
+M:	Joel Stanley <[email protected]>
+S:	Maintained
+F:	arch/arm/mach-aspeed/
+F:	arch/arm/boot/dts/aspeed-*
+F:	drivers/*/*aspeed*
+
 ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
 M:	Nicolas Ferre <[email protected]>
 M:	Alexandre Belloni <[email protected]>
@@ -1307,6 +1317,20 @@ F:	drivers/mtd/spi-nor/nxp-spifi.c
 F:	drivers/rtc/rtc-lpc24xx.c
 N:	lpc18xx
 
+ARM/LPC32XX SOC SUPPORT
+M:	Vladimir Zapolskiy <[email protected]>
+M:	Sylvain Lemieux <[email protected]>
+L:	[email protected] (moderated for non-subscribers)
+T:	git git://github.com/vzapolskiy/linux-lpc32xx.git
+S:	Maintained
+F:	arch/arm/boot/dts/lpc32*
+F:	arch/arm/mach-lpc32xx/
+F:	drivers/i2c/busses/i2c-pnx.c
+F:	drivers/net/ethernet/nxp/lpc_eth.c
+F:	drivers/usb/host/ohci-nxp.c
+F:	drivers/watchdog/pnx4008_wdt.c
+N:	lpc32xx
+
 ARM/MAGICIAN MACHINE SUPPORT
 M:	Philipp Zabel <[email protected]>
 S:	Maintained
@@ -1357,6 +1381,15 @@ W:	http://www.digriz.org.uk/ts78xx/kernel
 S:	Maintained
 F:	arch/arm/mach-orion5x/ts78xx-*
 
+ARM/OXNAS platform support
+M:	Neil Armstrong <[email protected]>
+L:	[email protected] (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-oxnas/
+F:	arch/arm/boot/dts/oxnas*
+F:	arch/arm/boot/dts/wd-mbwe.dts
+N:	oxnas
+
 ARM/Mediatek RTC DRIVER
 M:	Eddie Huang <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
@@ -1643,6 +1676,7 @@ F:	arch/arm/boot/dts/sti*
 F:	drivers/char/hw_random/st-rng.c
 F:	drivers/clocksource/arm_global_timer.c
 F:	drivers/clocksource/clksrc_st_lpc.c
+F:	drivers/cpufreq/sti-cpufreq.c
 F:	drivers/i2c/busses/i2c-st.c
 F:	drivers/media/rc/st_rc.c
 F:	drivers/media/platform/sti/c8sectpfe/
@@ -1652,6 +1686,7 @@ F:	drivers/phy/phy-miphy365x.c
 F:	drivers/phy/phy-stih407-usb.c
 F:	drivers/phy/phy-stih41x-usb.c
 F:	drivers/pinctrl/pinctrl-st.c
+F:	drivers/remoteproc/st_remoteproc.c
 F:	drivers/reset/sti/
 F:	drivers/rtc/rtc-st-lpc.c
 F:	drivers/tty/serial/st-asc.c
@@ -1776,6 +1811,7 @@ F:	*/*/vexpress*
 F:	*/*/*/vexpress*
 F:	drivers/clk/versatile/clk-vexpress-osc.c
 F:	drivers/clocksource/versatile.c
+N:	mps2
 
 ARM/VFP SUPPORT
 M:	Russell King <[email protected]>
@@ -6789,12 +6825,6 @@ W:	logfs.org
 S:	Maintained
 F:	fs/logfs/
 
-LPC32XX MACHINE SUPPORT
-M:	Roland Stigge <[email protected]>
-L:	[email protected] (moderated for non-subscribers)
-S:	Maintained
-F:	arch/arm/mach-lpc32xx/
-
 LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
 M:	Sathya Prakash <[email protected]>
 M:	Chaitra P B <[email protected]>
@@ -10174,8 +10204,8 @@ F:	arch/arm/mach-s3c24xx/bast-irq.c
 TI DAVINCI MACHINE SUPPORT
 M:	Sekhar Nori <[email protected]>
 M:	Kevin Hilman <[email protected]>
-T:	git git://gitorious.org/linux-davinci/linux-davinci.git
-Q:	http://patchwork.kernel.org/project/linux-davinci/list/
+L:	linux-[email protected] (moderated for non-subscribers)
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git
 S:	Supported
 F:	arch/arm/mach-davinci/
 F:	drivers/i2c/busses/i2c-davinci.c

arch/arm/Kconfig

@@ -777,6 +777,8 @@ source "arch/arm/mach-meson/Kconfig"
 
 source "arch/arm/mach-moxart/Kconfig"
 
+source "arch/arm/mach-aspeed/Kconfig"
+
 source "arch/arm/mach-mv78xx0/Kconfig"
 
 source "arch/arm/mach-imx/Kconfig"
@@ -806,6 +808,8 @@ source "arch/arm/plat-pxa/Kconfig"
 
 source "arch/arm/mach-mmp/Kconfig"
 
+source "arch/arm/mach-oxnas/Kconfig"
+
 source "arch/arm/mach-qcom/Kconfig"
 
 source "arch/arm/mach-realview/Kconfig"
@@ -894,6 +898,18 @@ config MACH_STM32F429
 	depends on ARCH_STM32
 	default y
 
+config ARCH_MPS2
+	bool "ARM MPS2 paltform"
+	depends on ARM_SINGLE_ARMV7M
+	select ARM_AMBA
+	select CLKSRC_MPS2
+	help
+	  Support for Cortex-M Prototyping System (or V2M-MPS2) which comes
+	  with a range of available cores like Cortex-M3/M4/M7.
+
+	  Please, note that depends which Application Note is used memory map
+	  for the platform may vary, so adjustment of RAM base might be needed.
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool

arch/arm/Makefile

@@ -183,6 +183,7 @@ machine-$(CONFIG_ARCH_LPC18XX)		+= lpc18xx
 machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
 machine-$(CONFIG_ARCH_MESON)		+= meson
 machine-$(CONFIG_ARCH_MMP)		+= mmp
+machine-$(CONFIG_ARCH_MPS2)		+= vexpress
 machine-$(CONFIG_ARCH_MOXART)		+= moxart
 machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu

arch/arm/mach-aspeed/Kconfig

@@ -0,0 +1,30 @@
+menuconfig ARCH_ASPEED
+	bool "Aspeed BMC architectures"
+	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6
+	select SRAM
+	select WATCHDOG
+	select ASPEED_WATCHDOG
+	select MOXART_TIMER
+	help
+	  Say Y here if you want to run your kernel on an ASpeed BMC SoC.
+
+if ARCH_ASPEED
+
+config MACH_ASPEED_G4
+	bool "Aspeed SoC 4th Generation"
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+	help
+	 Say yes if you intend to run on an Aspeed ast2400 or similar
+	 fourth generation BMCs, such as those used by OpenPower Power8
+	 systems.
+
+config MACH_ASPEED_G5
+	bool "Aspeed SoC 5th Generation"
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+	help
+	 Say yes if you intend to run on an Aspeed ast2500 or similar
+	 fifth generation Aspeed BMCs.
+
+endif

arch/arm/mach-at91/sama5.c

@@ -18,8 +18,26 @@
 #include "soc.h"
 
 static const struct at91_soc sama5_socs[] = {
-	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27_EXID_MATCH,
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D21CU_EXID_MATCH,
+		 "sama5d21", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D22CU_EXID_MATCH,
+		 "sama5d22", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D23CU_EXID_MATCH,
+		 "sama5d23", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CX_EXID_MATCH,
+		 "sama5d24", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CU_EXID_MATCH,
+		 "sama5d24", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D26CU_EXID_MATCH,
+		 "sama5d26", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CU_EXID_MATCH,
 		 "sama5d27", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CN_EXID_MATCH,
+		 "sama5d27", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CU_EXID_MATCH,
+		 "sama5d28", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CN_EXID_MATCH,
+		 "sama5d28", "sama5d2"),
 	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
 		 "sama5d31", "sama5d3"),
 	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,

arch/arm/mach-at91/soc.c

@@ -22,48 +22,93 @@
 #include "soc.h"
 
 #define AT91_DBGU_CIDR			0x40
-#define AT91_DBGU_CIDR_VERSION(x)	((x) & 0x1f)
-#define AT91_DBGU_CIDR_EXT		BIT(31)
-#define AT91_DBGU_CIDR_MATCH_MASK	0x7fffffe0
 #define AT91_DBGU_EXID			0x44
+#define AT91_CHIPID_CIDR		0x00
+#define AT91_CHIPID_EXID		0x04
+#define AT91_CIDR_VERSION(x)		((x) & 0x1f)
+#define AT91_CIDR_EXT			BIT(31)
+#define AT91_CIDR_MATCH_MASK		0x7fffffe0
 
-struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
+static int __init at91_get_cidr_exid_from_dbgu(u32 *cidr, u32 *exid)
 {
-	struct soc_device_attribute *soc_dev_attr;
-	const struct at91_soc *soc;
-	struct soc_device *soc_dev;
 	struct device_node *np;
 	void __iomem *regs;
-	u32 cidr, exid;
 
 	np = of_find_compatible_node(NULL, NULL, "atmel,at91rm9200-dbgu");
 	if (!np)
 		np = of_find_compatible_node(NULL, NULL,
 					     "atmel,at91sam9260-dbgu");
+	if (!np)
+		return -ENODEV;
 
-	if (!np) {
-		pr_warn("Could not find DBGU node");
-		return NULL;
+	regs = of_iomap(np, 0);
+	of_node_put(np);
+
+	if (!regs) {
+		pr_warn("Could not map DBGU iomem range");
+		return -ENXIO;
 	}
 
+	*cidr = readl(regs + AT91_DBGU_CIDR);
+	*exid = readl(regs + AT91_DBGU_EXID);
+
+	iounmap(regs);
+
+	return 0;
+}
+
+static int __init at91_get_cidr_exid_from_chipid(u32 *cidr, u32 *exid)
+{
+	struct device_node *np;
+	void __iomem *regs;
+
+	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-chipid");
+	if (!np)
+		return -ENODEV;
+
 	regs = of_iomap(np, 0);
 	of_node_put(np);
 
 	if (!regs) {
 		pr_warn("Could not map DBGU iomem range");
-		return NULL;
+		return -ENXIO;
 	}
 
-	cidr = readl(regs + AT91_DBGU_CIDR);
-	exid = readl(regs + AT91_DBGU_EXID);
+	*cidr = readl(regs + AT91_CHIPID_CIDR);
+	*exid = readl(regs + AT91_CHIPID_EXID);
 
 	iounmap(regs);
 
+	return 0;
+}
+
+struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	const struct at91_soc *soc;
+	struct soc_device *soc_dev;
+	u32 cidr, exid;
+	int ret;
+
+	/*
+	 * With SAMA5D2 and later SoCs, CIDR and EXID registers are no more
+	 * in the dbgu device but in the chipid device whose purpose is only
+	 * to expose these two registers.
+	 */
+	ret = at91_get_cidr_exid_from_dbgu(&cidr, &exid);
+	if (ret)
+		ret = at91_get_cidr_exid_from_chipid(&cidr, &exid);
+	if (ret) {
+		if (ret == -ENODEV)
+			pr_warn("Could not find identification node");
+		return NULL;
+	}
+
 	for (soc = socs; soc->name; soc++) {
-		if (soc->cidr_match != (cidr & AT91_DBGU_CIDR_MATCH_MASK))
+		if (soc->cidr_match != (cidr & AT91_CIDR_MATCH_MASK))
 			continue;
 
-		if (!(cidr & AT91_DBGU_CIDR_EXT) || soc->exid_match == exid)
+		if (!(cidr & AT91_CIDR_EXT) || soc->exid_match == exid)
 			break;
 	}
 
@@ -79,7 +124,7 @@ struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
 	soc_dev_attr->family = soc->family;
 	soc_dev_attr->soc_id = soc->name;
 	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X",
-					   AT91_DBGU_CIDR_VERSION(cidr));
+					   AT91_CIDR_VERSION(cidr));
 	soc_dev = soc_device_register(soc_dev_attr);
 	if (IS_ERR(soc_dev)) {
 		kfree(soc_dev_attr->revision);
@@ -91,7 +136,7 @@ struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
 	if (soc->family)
 		pr_info("Detected SoC family: %s\n", soc->family);
 	pr_info("Detected SoC: %s, revision %X\n", soc->name,
-		AT91_DBGU_CIDR_VERSION(cidr));
+		AT91_CIDR_VERSION(cidr));
 
 	return soc_dev;
 }

arch/arm/mach-at91/soc.h

@@ -63,7 +63,17 @@ at91_soc_init(const struct at91_soc *socs);
 #define AT91SAM9XE512_CIDR_MATCH	0x329aa3a0
 
 #define SAMA5D2_CIDR_MATCH		0x0a5c08c0
-#define SAMA5D27_EXID_MATCH		0x00000021
+#define SAMA5D21CU_EXID_MATCH		0x0000005a
+#define SAMA5D22CU_EXID_MATCH		0x00000059
+#define SAMA5D22CN_EXID_MATCH		0x00000069
+#define SAMA5D23CU_EXID_MATCH		0x00000058
+#define SAMA5D24CX_EXID_MATCH		0x00000004
+#define SAMA5D24CU_EXID_MATCH		0x00000014
+#define SAMA5D26CU_EXID_MATCH		0x00000012
+#define SAMA5D27CU_EXID_MATCH		0x00000011
+#define SAMA5D27CN_EXID_MATCH		0x00000021
+#define SAMA5D28CU_EXID_MATCH		0x00000010
+#define SAMA5D28CN_EXID_MATCH		0x00000020
 
 #define SAMA5D3_CIDR_MATCH		0x0a5c07c0
 #define SAMA5D31_EXID_MATCH		0x00444300

arch/arm/mach-davinci/Makefile

@@ -14,8 +14,8 @@ obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
-obj-$(CONFIG_ARCH_DAVINCI_DA850)        += da850.o devices-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA830)	+= da830.o devices-da8xx.o usb-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= da850.o devices-da8xx.o usb-da8xx.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o