Merge tag 'asoc-v3.10-2' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/broonie/sound into for-next

ASoC: More updates for v3.10

The main additional change here is Lars-Peter's DMA work plus the
platform conversions which have been tested - getting this in mainline
will make life easier for development after the merge window.  These
factor a large chunk of code out of the drivers for the platforms using
dmaengine, greatly simplifying development.

Documentation/DocBook/device-drivers.tmpl

@@ -227,7 +227,7 @@ X!Isound/sound_firmware.c
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
 !Edrivers/tty/serial/serial_core.c
-!Edrivers/tty/serial/8250/8250.c
+!Edrivers/tty/serial/8250/8250_core.c
   </chapter>
 
   <chapter id="fbdev">

Documentation/scsi/LICENSE.qla2xxx

@@ -1,4 +1,4 @@
-Copyright (c) 2003-2012 QLogic Corporation
+Copyright (c) 2003-2013 QLogic Corporation
 QLogic Linux FC-FCoE Driver
 
 This program includes a device driver for Linux 3.x.

MAINTAINERS

@@ -4941,6 +4941,12 @@ W:	logfs.org
 S:	Maintained
 F:	fs/logfs/
 
+LPC32XX MACHINE SUPPORT
+M:	Roland Stigge <[email protected]>
+L:	[email protected] (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-lpc32xx/
+
 LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
 M:	Nagalakshmi Nandigama <[email protected]>
 M:	Sreekanth Reddy <[email protected]>
@@ -6951,7 +6957,6 @@ F:	drivers/scsi/st*
 
 SCTP PROTOCOL
 M:	Vlad Yasevich <[email protected]>
-M:	Sridhar Samudrala <[email protected]>
 M:	Neil Horman <[email protected]>
 L:	[email protected]
 W:	http://lksctp.sourceforge.net

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

arch/arc/include/asm/irqflags.h

@@ -39,7 +39,7 @@ static inline long arch_local_irq_save(void)
 	"	flag.nz %0		\n"
 	: "=r"(temp), "=r"(flags)
 	: "n"((STATUS_E1_MASK | STATUS_E2_MASK))
-	: "cc");
+	: "memory", "cc");
 
 	return flags;
 }
@@ -53,7 +53,8 @@ static inline void arch_local_irq_restore(unsigned long flags)
 	__asm__ __volatile__(
 	"	flag %0			\n"
 	:
-	: "r"(flags));
+	: "r"(flags)
+	: "memory");
 }
 
 /*
@@ -73,7 +74,8 @@ static inline void arch_local_irq_disable(void)
 	"	and %0, %0, %1		\n"
 	"	flag %0			\n"
 	: "=&r"(temp)
-	: "n"(~(STATUS_E1_MASK | STATUS_E2_MASK)));
+	: "n"(~(STATUS_E1_MASK | STATUS_E2_MASK))
+	: "memory");
 }
 
 /*
@@ -85,7 +87,9 @@ static inline long arch_local_save_flags(void)
 
 	__asm__ __volatile__(
 	"	lr  %0, [status32]	\n"
-	: "=&r"(temp));
+	: "=&r"(temp)
+	:
+	: "memory");
 
 	return temp;
 }

arch/arm/boot/dts/imx28-m28evk.dts

@@ -152,7 +152,6 @@
 			i2c0: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins_a>;
-				clock-frequency = <400000>;
 				status = "okay";
 
 				sgtl5000: codec@0a {

arch/arm/boot/dts/imx28-sps1.dts

@@ -70,7 +70,6 @@
 			i2c0: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins_a>;
-				clock-frequency = <400000>;
 				status = "okay";
 
 				rtc: rtc@51 {

arch/arm/boot/dts/imx6qdl.dtsi

@@ -91,6 +91,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x00a00600 0x20>;
 			interrupts = <1 13 0xf01>;
+			clocks = <&clks 15>;
 		};
 
 		L2: l2-cache@00a02000 {

arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts

@@ -96,11 +96,11 @@
 				marvell,function = "gpio";
 			};
 			pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
-				marvell,pins = "mpp44";
+				marvell,pins = "mpp46";
 				marvell,function = "gpio";
 			};
 			pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
-				marvell,pins = "mpp45";
+				marvell,pins = "mpp47";
 				marvell,function = "gpio";
 			};
 
@@ -157,14 +157,14 @@
 			gpios = <&gpio0 16 0>;
 			linux,default-trigger = "default-on";
 		};
-		health_led1 {
+		rebuild_led {
+			label = "status:white:rebuild_led";
+			gpios = <&gpio1 4 0>;
+		};
+		health_led {
 			label = "status:red:health_led";
 			gpios = <&gpio1 5 0>;
 		};
-		health_led2 {
-			label = "status:white:health_led";
-			gpios = <&gpio1 4 0>;
-		};
 		backup_led {
 			label = "status:blue:backup_led";
 			gpios = <&gpio0 15 0>;

arch/arm/mach-imx/clk-imx35.c

@@ -257,6 +257,7 @@ int __init mx35_clocks_init(void)
 	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
 	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
+	clk_register_clkdev(clk[admux_gate], "audmux", NULL);
 
 	clk_prepare_enable(clk[spba_gate]);
 	clk_prepare_enable(clk[gpio1_gate]);
@@ -265,6 +266,7 @@ int __init mx35_clocks_init(void)
 	clk_prepare_enable(clk[iim_gate]);
 	clk_prepare_enable(clk[emi_gate]);
 	clk_prepare_enable(clk[max_gate]);
+	clk_prepare_enable(clk[iomuxc_gate]);
 
 	/*
 	 * SCC is needed to boot via mmc after a watchdog reset. The clock code

arch/arm/mach-imx/clk-imx6q.c

@@ -115,7 +115,7 @@ static const char *gpu2d_core_sels[]	= { "axi", "pll3_usb_otg", "pll2_pfd0_352m"
 static const char *gpu3d_core_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
 static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
 static const char *ipu_sels[]		= { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
-static const char *ldb_di_sels[]	= { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_pfd1_540m", };
+static const char *ldb_di_sels[]	= { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
 static const char *ipu_di_pre_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
 static const char *ipu1_di0_sels[]	= { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
 static const char *ipu1_di1_sels[]	= { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
@@ -443,7 +443,6 @@ int __init mx6q_clocks_init(void)
 
 	clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
-	clk_register_clkdev(clk[twd], NULL, "smp_twd");
 	clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
 	clk_register_clkdev(clk[ahb], "ahb", NULL);
 	clk_register_clkdev(clk[cko1], "cko1", NULL);

arch/arm/mach-kirkwood/board-iomega_ix2_200.c

@@ -20,10 +20,15 @@ static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
 	.duplex         = DUPLEX_FULL,
 };
 
+static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(11),
+};
+
 void __init iomega_ix2_200_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
+	kirkwood_ge00_init(&iomega_ix2_200_ge00_data);
+	kirkwood_ge01_init(&iomega_ix2_200_ge01_data);
 }

arch/arm/mach-mvebu/irq-armada-370-xp.c

@@ -61,7 +61,6 @@ static struct irq_domain *armada_370_xp_mpic_domain;
  */
 static void armada_370_xp_irq_mask(struct irq_data *d)
 {
-#ifdef CONFIG_SMP
 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
 	if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
@@ -70,15 +69,10 @@ static void armada_370_xp_irq_mask(struct irq_data *d)
 	else
 		writel(hwirq, per_cpu_int_base +
 				ARMADA_370_XP_INT_SET_MASK_OFFS);
-#else
-	writel(irqd_to_hwirq(d),
-	       per_cpu_int_base + ARMADA_370_XP_INT_SET_MASK_OFFS);
-#endif
 }
 
 static void armada_370_xp_irq_unmask(struct irq_data *d)
 {
-#ifdef CONFIG_SMP
 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
 	if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
@@ -87,10 +81,6 @@ static void armada_370_xp_irq_unmask(struct irq_data *d)
 	else
 		writel(hwirq, per_cpu_int_base +
 				ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
-#else
-	writel(irqd_to_hwirq(d),
-	       per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
-#endif
 }
 
 #ifdef CONFIG_SMP
@@ -146,7 +136,11 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
 				      unsigned int virq, irq_hw_number_t hw)
 {
 	armada_370_xp_irq_mask(irq_get_irq_data(virq));
-	writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
+	if (hw != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
+		writel(hw, per_cpu_int_base +
+			ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
+	else
+		writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
 	irq_set_status_flags(virq, IRQ_LEVEL);
 
 	if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) {

arch/arm/mach-s3c24xx/include/mach/irqs.h

@@ -188,10 +188,8 @@
 
 #if defined(CONFIG_CPU_S3C2416)
 #define NR_IRQS (IRQ_S3C2416_I2S1 + 1)
-#elif defined(CONFIG_CPU_S3C2443)
-#define NR_IRQS (IRQ_S3C2443_AC97+1)
 #else
-#define NR_IRQS (IRQ_S3C2440_AC97+1)
+#define NR_IRQS (IRQ_S3C2443_AC97 + 1)
 #endif
 
 /* compatibility define. */

arch/arm/mach-s3c24xx/irq.c

@@ -500,7 +500,7 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
 		base = (void *)0xfd000000;
 
 		intc->reg_mask = base + 0xa4;
-		intc->reg_pending = base + 0x08;
+		intc->reg_pending = base + 0xa8;
 		irq_num = 20;
 		irq_start = S3C2410_IRQ(32);
 		irq_offset = 4;

arch/c6x/include/asm/irqflags.h

@@ -27,7 +27,7 @@ static inline unsigned long arch_local_save_flags(void)
 /* set interrupt enabled status */
 static inline void arch_local_irq_restore(unsigned long flags)
 {
-	asm volatile (" mvc .s2 %0,CSR\n" : : "b"(flags));
+	asm volatile (" mvc .s2 %0,CSR\n" : : "b"(flags) : "memory");
 }
 
 /* unconditionally enable interrupts */

arch/ia64/kernel/palinfo.c

@@ -849,17 +849,6 @@ static palinfo_entry_t palinfo_entries[]={
 
 #define NR_PALINFO_ENTRIES	(int) ARRAY_SIZE(palinfo_entries)
 
-/*
- * this array is used to keep track of the proc entries we create. This is
- * required in the module mode when we need to remove all entries. The procfs code
- * does not do recursion of deletion
- *
- * Notes:
- *	- +1 accounts for the cpuN directory entry in /proc/pal
- */
-#define NR_PALINFO_PROC_ENTRIES	(NR_CPUS*(NR_PALINFO_ENTRIES+1))
-
-static struct proc_dir_entry *palinfo_proc_entries[NR_PALINFO_PROC_ENTRIES];
 static struct proc_dir_entry *palinfo_dir;
 
 /*
@@ -971,60 +960,32 @@ palinfo_read_entry(char *page, char **start, off_t off, int count, int *eof, voi
 static void __cpuinit
 create_palinfo_proc_entries(unsigned int cpu)
 {
-#	define CPUSTR	"cpu%d"
-
 	pal_func_cpu_u_t f;
-	struct proc_dir_entry **pdir;
 	struct proc_dir_entry *cpu_dir;
 	int j;
-	char cpustr[sizeof(CPUSTR)];
-
-
-	/*
-	 * we keep track of created entries in a depth-first order for
-	 * cleanup purposes. Each entry is stored into palinfo_proc_entries
-	 */
-	sprintf(cpustr,CPUSTR, cpu);
+	char cpustr[3+4+1];	/* cpu numbers are up to 4095 on itanic */
+	sprintf(cpustr, "cpu%d", cpu);
 
 	cpu_dir = proc_mkdir(cpustr, palinfo_dir);
+	if (!cpu_dir)
+		return;
 
 	f.req_cpu = cpu;
 
-	/*
-	 * Compute the location to store per cpu entries
-	 * We dont store the top level entry in this list, but
-	 * remove it finally after removing all cpu entries.
-	 */
-	pdir = &palinfo_proc_entries[cpu*(NR_PALINFO_ENTRIES+1)];
-	*pdir++ = cpu_dir;
 	for (j=0; j < NR_PALINFO_ENTRIES; j++) {
 		f.func_id = j;
-		*pdir = create_proc_read_entry(
-				palinfo_entries[j].name, 0, cpu_dir,
-				palinfo_read_entry, (void *)f.value);
-		pdir++;
+		create_proc_read_entry(
+			palinfo_entries[j].name, 0, cpu_dir,
+			palinfo_read_entry, (void *)f.value);
 	}
 }
 
 static void
 remove_palinfo_proc_entries(unsigned int hcpu)
 {
-	int j;
-	struct proc_dir_entry *cpu_dir, **pdir;
-
-	pdir = &palinfo_proc_entries[hcpu*(NR_PALINFO_ENTRIES+1)];
-	cpu_dir = *pdir;
-	*pdir++=NULL;
-	for (j=0; j < (NR_PALINFO_ENTRIES); j++) {
-		if ((*pdir)) {
-			remove_proc_entry ((*pdir)->name, cpu_dir);
-			*pdir ++= NULL;
-		}
-	}
-
-	if (cpu_dir) {
-		remove_proc_entry(cpu_dir->name, palinfo_dir);
-	}
+	char cpustr[3+4+1];	/* cpu numbers are up to 4095 on itanic */
+	sprintf(cpustr, "cpu%d", hcpu);
+	remove_proc_subtree(cpustr, palinfo_dir);
 }
 
 static int __cpuinit palinfo_cpu_callback(struct notifier_block *nfb,
@@ -1058,6 +1019,8 @@ palinfo_init(void)
 
 	printk(KERN_INFO "PAL Information Facility v%s\n", PALINFO_VERSION);
 	palinfo_dir = proc_mkdir("pal", NULL);
+	if (!palinfo_dir)
+		return -ENOMEM;
 
 	/* Create palinfo dirs in /proc for all online cpus */
 	for_each_online_cpu(i) {
@@ -1073,22 +1036,8 @@ palinfo_init(void)
 static void __exit
 palinfo_exit(void)
 {
-	int i = 0;
-
-	/* remove all nodes: depth first pass. Could optimize this  */
-	for_each_online_cpu(i) {
-		remove_palinfo_proc_entries(i);
-	}
-
-	/*
-	 * Remove the top level entry finally
-	 */
-	remove_proc_entry(palinfo_dir->name, NULL);
-
-	/*
-	 * Unregister from cpu notifier callbacks
-	 */
 	unregister_hotcpu_notifier(&palinfo_cpu_notifier);
+	remove_proc_subtree("pal", NULL);
 }
 
 module_init(palinfo_init);