Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
	drivers/staging/Kconfig
	drivers/staging/Makefile
	drivers/staging/cpc-usb/TODO
	drivers/staging/cpc-usb/cpc-usb_drv.c
	drivers/staging/cpc-usb/cpc.h
	drivers/staging/cpc-usb/cpc_int.h
	drivers/staging/cpc-usb/cpcusb.h

CREDITS

@@ -2800,7 +2800,7 @@ D: Starter of Linux1394 effort
 S: ask per mail for current address
 
 N: Nicolas Pitre
-E: nico@cam.org
+E: nico@fluxnic.net
 D: StrongARM SA1100 support integrator & hacker
 D: Xscale PXA architecture
 D: unified SMC 91C9x/91C11x ethernet driver (smc91x)

Documentation/ABI/stable/sysfs-class-backlight

@@ -0,0 +1,36 @@
+What:		/sys/class/backlight/<backlight>/bl_power
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <[email protected]>
+Description:
+		Control BACKLIGHT power, values are FB_BLANK_* from fb.h
+		 - FB_BLANK_UNBLANK (0)   : power on.
+		 - FB_BLANK_POWERDOWN (4) : power off
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/brightness
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <[email protected]>
+Description:
+		Control the brightness for this <backlight>. Values
+		are between 0 and max_brightness. This file will also
+		show the brightness level stored in the driver, which
+		may not be the actual brightness (see actual_brightness).
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/actual_brightness
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <[email protected]>
+Description:
+		Show the actual brightness by querying the hardware.
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/max_brightness
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <[email protected]>
+Description:
+		Maximum brightness for <backlight>.
+Users:		HAL

Documentation/ABI/testing/sysfs-bus-pci

@@ -84,6 +84,16 @@ Description:
 		from this part of the device tree.
 		Depends on CONFIG_HOTPLUG.
 
+What:		/sys/bus/pci/devices/.../reset
+Date:		July 2009
+Contact:	Michael S. Tsirkin <[email protected]>
+Description:
+		Some devices allow an individual function to be reset
+		without affecting other functions in the same device.
+		For devices that have this support, a file named reset
+		will be present in sysfs.  Writing 1 to this file
+		will perform reset.
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <[email protected]>

Documentation/ABI/testing/sysfs-class-lcd

@@ -0,0 +1,23 @@
+What:		/sys/class/lcd/<lcd>/lcd_power
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <[email protected]>
+Description:
+		Control LCD power, values are FB_BLANK_* from fb.h
+		 - FB_BLANK_UNBLANK (0)   : power on.
+		 - FB_BLANK_POWERDOWN (4) : power off
+
+What:		/sys/class/lcd/<lcd>/contrast
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <[email protected]>
+Description:
+		Current contrast of this LCD device. Value is between 0 and
+		/sys/class/lcd/<lcd>/max_contrast.
+
+What:		/sys/class/lcd/<lcd>/max_contrast
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <[email protected]>
+Description:
+		Maximum contrast for this LCD device.

Documentation/ABI/testing/sysfs-class-led

@@ -0,0 +1,28 @@
+What:		/sys/class/leds/<led>/brightness
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <[email protected]>
+Description:
+		Set the brightness of the LED. Most LEDs don't
+		have hardware brightness support so will just be turned on for
+		non-zero brightness settings. The value is between 0 and
+		/sys/class/leds/<led>/max_brightness.
+
+What:		/sys/class/leds/<led>/max_brightness
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <[email protected]>
+Description:
+		Maximum brightness level for this led, default is 255 (LED_FULL).
+
+What:		/sys/class/leds/<led>/trigger
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <[email protected]>
+Description:
+		Set the trigger for this LED. A trigger is a kernel based source
+		of led events.
+		You can change triggers in a similar manner to the way an IO
+		scheduler is chosen. Trigger specific parameters can appear in
+		/sys/class/leds/<led> once a given trigger is selected.
+

Documentation/ABI/testing/sysfs-gpio

@@ -19,6 +19,7 @@ Description:
 	/gpioN ... for each exported GPIO #N
 	    /value ... always readable, writes fail for input GPIOs
 	    /direction ... r/w as: in, out (default low); write: high, low
+	    /edge ... r/w as: none, falling, rising, both
 	/gpiochipN ... for each gpiochip; #N is its first GPIO
 	    /base ... (r/o) same as N
 	    /label ... (r/o) descriptive, not necessarily unique

Documentation/ABI/testing/sysfs-platform-asus-laptop

@@ -0,0 +1,52 @@
+What:		/sys/devices/platform/asus-laptop/display
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <[email protected]>
+Description:
+		This file allows display switching. The value
+		is composed by 4 bits and defined as follow:
+		4321
+		|||`- LCD
+		||`-- CRT
+		|`--- TV
+		`---- DVI
+		Ex: - 0 (0000b) means no display
+		    - 3 (0011b) CRT+LCD.
+
+What:		/sys/devices/platform/asus-laptop/gps
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <[email protected]>
+Description:
+		Control the gps device. 1 means on, 0 means off.
+Users:		Lapsus
+
+What:		/sys/devices/platform/asus-laptop/ledd
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <[email protected]>
+Description:
+		Some models like the W1N have a LED display that can be
+		used to display several informations.
+		To control the LED display, use the following :
+		    echo 0x0T000DDD > /sys/devices/platform/asus-laptop/
+		where T control the 3 letters display, and DDD the 3 digits display.
+		The DDD table can be found in Documentation/laptops/asus-laptop.txt
+
+What:		/sys/devices/platform/asus-laptop/bluetooth
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <[email protected]>
+Description:
+		Control the bluetooth device. 1 means on, 0 means off.
+		This may control the led, the device or both.
+Users:		Lapsus
+
+What:		/sys/devices/platform/asus-laptop/wlan
+Date:		January 2007
+KernelVersion:	2.6.20
+Contact:	"Corentin Chary" <[email protected]>
+Description:
+		Control the bluetooth device. 1 means on, 0 means off.
+		This may control the led, the device or both.
+Users:		Lapsus

Documentation/ABI/testing/sysfs-platform-eeepc-laptop

@@ -0,0 +1,50 @@
+What:		/sys/devices/platform/eeepc-laptop/disp
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	"Corentin Chary" <[email protected]>
+Description:
+		This file allows display switching.
+		- 1 = LCD
+		- 2 = CRT
+		- 3 = LCD+CRT
+		If you run X11, you should use xrandr instead.
+
+What:		/sys/devices/platform/eeepc-laptop/camera
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	"Corentin Chary" <[email protected]>
+Description:
+		Control the camera. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/eeepc-laptop/cardr
+Date:		May 2008
+KernelVersion:	2.6.26
+Contact:	"Corentin Chary" <[email protected]>
+Description:
+		Control the card reader. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/eeepc-laptop/cpufv
+Date:		Jun 2009
+KernelVersion:	2.6.31
+Contact:	"Corentin Chary" <[email protected]>
+Description:
+		Change CPU clock configuration.
+		On the Eee PC 1000H there are three available clock configuration:
+		    * 0 -> Super Performance Mode
+		    * 1 -> High Performance Mode
+		    * 2 -> Power Saving Mode
+		On Eee PC 701 there is only 2 available clock configurations.
+		Available configuration are listed in available_cpufv file.
+		Reading this file will show the raw hexadecimal value which
+		is defined as follow:
+		| 8 bit | 8 bit |
+		    |       `---- Current mode
+		    `------------ Availables modes
+		For example, 0x301 means: mode 1 selected, 3 available modes.
+
+What:		/sys/devices/platform/eeepc-laptop/available_cpufv
+Date:		Jun 2009
+KernelVersion:	2.6.31
+Contact:	"Corentin Chary" <[email protected]>
+Description:
+		List available cpufv modes.

Documentation/DocBook/Makefile

@@ -14,7 +14,7 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
 	    mac80211.xml debugobjects.xml sh.xml regulator.xml \
 	    alsa-driver-api.xml writing-an-alsa-driver.xml \
-	    tracepoint.xml
+	    tracepoint.xml media.xml
 
 ###
 # The build process is as follows (targets):
@@ -32,7 +32,7 @@ PS_METHOD	= $(prefer-db2x)
 
 ###
 # The targets that may be used.
-PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs
+PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs media
 
 BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
 xmldocs: $(BOOKS)
@@ -45,12 +45,16 @@ PDF := $(patsubst %.xml, %.pdf, $(BOOKS))
 pdfdocs: $(PDF)
 
 HTML := $(sort $(patsubst %.xml, %.html, $(BOOKS)))
-htmldocs: $(HTML)
+htmldocs: media $(HTML)
 	$(call build_main_index)
 
 MAN := $(patsubst %.xml, %.9, $(BOOKS))
 mandocs: $(MAN)
 
+media:
+	mkdir -p $(srctree)/Documentation/DocBook/media/
+	cp $(srctree)/Documentation/DocBook/dvb/*.png $(srctree)/Documentation/DocBook/v4l/*.gif $(srctree)/Documentation/DocBook/media/
+
 installmandocs: mandocs
 	mkdir -p /usr/local/man/man9/
 	install Documentation/DocBook/man/*.9.gz /usr/local/man/man9/

Documentation/DocBook/dvb/.gitignore

@@ -0,0 +1 @@
+!*.xml