ASoC: fsl_asrc_dma: Reuse the dma channel if available in Back-End

The dma channel has been requested by Back-End cpu dai driver already.
If fsl_asrc_dma requests dma chan with same dma:tx symlink, then
there will be below warning with SDMA.

[   48.174236] fsl-esai-dai 2024000.esai: Cannot create DMA dma:tx symlink

So if we can reuse the dma channel of Back-End, then the issue can be
fixed.

In order to get the dma channel which is already requested in Back-End.
we use the exported two functions (snd_soc_lookup_component_nolocked
and soc_component_to_pcm). If we can get the dma channel, then reuse it,
if can't, then request a new one.

Signed-off-by: Shengjiu Wang <[email protected]>
Reviewed-by: Nicolin Chen <[email protected]>
Link: https://lore.kernel.org/r/3a79f0442cb4930c633cf72145cfe95a45b9c78e.1591947428.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <[email protected]>

sound/soc/fsl/fsl_asrc_dma.c

@@ -135,14 +135,15 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
 	struct snd_dmaengine_dai_dma_data *dma_params_be = NULL;
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct fsl_asrc_pair *pair = runtime->private_data;
+	struct dma_chan *tmp_chan = NULL, *be_chan = NULL;
+	struct snd_soc_component *component_be = NULL;
 	struct fsl_asrc *asrc = pair->asrc;
 	struct dma_slave_config config_fe, config_be;
 	enum asrc_pair_index index = pair->index;
 	struct device *dev = component->dev;
 	int stream = substream->stream;
 	struct imx_dma_data *tmp_data;
 	struct snd_soc_dpcm *dpcm;
-	struct dma_chan *tmp_chan;
 	struct device *dev_be;
 	u8 dir = tx ? OUT : IN;
 	dma_cap_mask_t mask;
@@ -197,18 +198,30 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
 	dma_cap_set(DMA_SLAVE, mask);
 	dma_cap_set(DMA_CYCLIC, mask);
 
+	/*
+	 * The Back-End device might have already requested a DMA channel,
+	 * so try to reuse it first, and then request a new one upon NULL.
+	 */
+	component_be = snd_soc_lookup_component_nolocked(dev_be, SND_DMAENGINE_PCM_DRV_NAME);
+	if (component_be) {
+		be_chan = soc_component_to_pcm(component_be)->chan[substream->stream];
+		tmp_chan = be_chan;
+	}
+	if (!tmp_chan)
+		tmp_chan = dma_request_slave_channel(dev_be, tx ? "tx" : "rx");
+
 	/*
 	 * An EDMA DEV_TO_DEV channel is fixed and bound with DMA event of each
 	 * peripheral, unlike SDMA channel that is allocated dynamically. So no
-	 * need to configure dma_request and dma_request2, but get dma_chan via
-	 * dma_request_slave_channel directly with dma name of Front-End device
+	 * need to configure dma_request and dma_request2, but get dma_chan of
+	 * Back-End device directly via dma_request_slave_channel.
 	 */
 	if (!asrc->use_edma) {
 		/* Get DMA request of Back-End */
-		tmp_chan = dma_request_slave_channel(dev_be, tx ? "tx" : "rx");
 		tmp_data = tmp_chan->private;
 		pair->dma_data.dma_request = tmp_data->dma_request;
-		dma_release_channel(tmp_chan);
+		if (!be_chan)
+			dma_release_channel(tmp_chan);
 
 		/* Get DMA request of Front-End */
 		tmp_chan = asrc->get_dma_channel(pair, dir);
@@ -221,6 +234,8 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
 		pair->dma_chan[dir] =
 			dma_request_channel(mask, filter, &pair->dma_data);
 	} else {
+		if (!be_chan)
+			dma_release_channel(tmp_chan);
 		pair->dma_chan[dir] =
 			asrc->get_dma_channel(pair, dir);
 	}