sh: Add support for Solution Engine SH7721 board

Add support for Solution Engine SH7721 board(MS7721RP01).

Signed-off-by: Yoshihiro Shimoda <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>

arch/sh/Kconfig

@@ -372,6 +372,14 @@ config SH_7619_SOLUTION_ENGINE
 	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
 	  evaluation board.
 
+config SH_7721_SOLUTION_ENGINE
+	bool "SolutionEngine7721"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7721
+	help
+	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
+	  evaluation board.
+
 config SH_7722_SOLUTION_ENGINE
 	bool "SolutionEngine7722"
 	select SOLUTION_ENGINE

arch/sh/Makefile

@@ -107,6 +107,7 @@ machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= se/7722
 machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= se/7751
 machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= se/7780
 machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= se/7343
+machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= se/7721
 machdir-$(CONFIG_SH_HP6XX)			+= hp6xx
 machdir-$(CONFIG_SH_DREAMCAST)			+= dreamcast
 machdir-$(CONFIG_SH_MPC1211)			+= mpc1211

arch/sh/boards/se/7721/Makefile

@@ -0,0 +1 @@
+obj-y	 := setup.o irq.o

arch/sh/boards/se/7721/irq.c

@@ -0,0 +1,45 @@
+/*
+ * linux/arch/sh/boards/se/7721/irq.c
+ *
+ * Copyright (C) 2008  Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <asm/se7721.h>
+
+enum {
+	UNUSED = 0,
+
+	/* board specific interrupt sources */
+	MRSHPC,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(MRSHPC, MRSHPC_IRQ0),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ FPGA_ILSR6, 0, 8, 4, /* IRLMSK */
+	  { 0, MRSHPC } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
+			 NULL, NULL, prio_registers, NULL);
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7721_IRQ(void)
+{
+	/* PPCR */
+	ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118);
+
+	register_intc_controller(&intc_desc);
+	intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
+}

arch/sh/boards/se/7721/setup.c

@@ -0,0 +1,99 @@
+/*
+ * linux/arch/sh/boards/se/7721/setup.c
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * Hitachi UL SolutionEngine 7721 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <asm/se7721.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.regsize	= 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start	= PA_MRSHPC_IO + 0x1f0,
+		.end	= PA_MRSHPC_IO + 0x1f0 + 8 ,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		.start	= PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end	= PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
+		.flags	= IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = MRSHPC_IRQ0,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
+static struct platform_device *se7721_devices[] __initdata = {
+	&cf_ide_device,
+	&heartbeat_device
+};
+
+static int __init se7721_devices_setup(void)
+{
+	return platform_add_devices(se7721_devices,
+		ARRAY_SIZE(se7721_devices));
+}
+device_initcall(se7721_devices_setup);
+
+static void __init se7721_setup(char **cmdline_p)
+{
+	/* for USB */
+	ctrl_outw(0x0000, 0xA405010C);	/* PGCR */
+	ctrl_outw(0x0000, 0xA405010E);	/* PHCR */
+	ctrl_outw(0x00AA, 0xA4050118);	/* PPCR */
+	ctrl_outw(0x0000, 0xA4050124);	/* PSELA */
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_se7721 __initmv = {
+	.mv_name		= "Solution Engine 7721",
+	.mv_setup		= se7721_setup,
+	.mv_nr_irqs		= 109,
+	.mv_init_irq		= init_se7721_IRQ,
+};