Merge tag 'char-misc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/gregkh/char-misc

Pull char / misc driver updates from Greg KH:
 "Here's the big char and misc driver update for 4.7-rc1.

  Lots of different tiny driver subsystems have updates here with new
  drivers and functionality.  Details in the shortlog.

  All have been in linux-next with no reported issues for a while"

* tag 'char-misc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (125 commits)
  mcb: Delete num_cells variable which is not required
  mcb: Fixed bar number assignment for the gdd
  mcb: Replace ioremap and request_region with the devm version
  mcb: Implement bus->dev.release callback
  mcb: export bus information via sysfs
  mcb: Correctly initialize the bus's device
  mei: bus: call mei_cl_read_start under device lock
  coresight: etb10: adjust read pointer only when needed
  coresight: configuring ETF in FIFO mode when acting as link
  coresight: tmc: implementing TMC-ETF AUX space API
  coresight: moving struct cs_buffers to header file
  coresight: tmc: keep track of memory width
  coresight: tmc: make sysFS and Perf mode mutually exclusive
  coresight: tmc: dump system memory content only when needed
  coresight: tmc: adding mode of operation for link/sinks
  coresight: tmc: getting rid of multiple read access
  coresight: tmc: allocating memory when needed
  coresight: tmc: making prepare/unprepare functions generic
  coresight: tmc: splitting driver in ETB/ETF and ETR components
  coresight: tmc: cleaning up header file
  ...

Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10

@@ -6,13 +6,6 @@ Description:	(RW) Add/remove a sink from a trace path.  There can be multiple
 		source for a single sink.
 		ex: echo 1 > /sys/bus/coresight/devices/20010000.etb/enable_sink
 
-What:		/sys/bus/coresight/devices/<memory_map>.etb/status
-Date:		November 2014
-KernelVersion:	3.19
-Contact:	Mathieu Poirier <[email protected]>
-Description:	(R) List various control and status registers.  The specific
-		layout and content is driver specific.
-
 What:		/sys/bus/coresight/devices/<memory_map>.etb/trigger_cntr
 Date:		November 2014
 KernelVersion:	3.19
@@ -22,3 +15,65 @@ Description:	(RW) Disables write access to the Trace RAM by stopping the
 		following the trigger event. The number of 32-bit words written
 		into the Trace RAM following the trigger event is equal to the
 		value stored in this register+1 (from ARM ETB-TRM).
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/rdp
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) Defines the depth, in words, of the trace RAM in powers of
+		2.  The value is read directly from HW register RDP, 0x004.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/sts
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) Shows the value held by the ETB status register.  The value
+		is read directly from HW register STS, 0x00C.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/rrp
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) Shows the value held by the ETB RAM Read Pointer register
+		that is used to read entries from the Trace RAM over the APB
+		interface.  The value is read directly from HW register RRP,
+		0x014.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/rwp
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) Shows the value held by the ETB RAM Write Pointer register
+		that is used to sets the write pointer to write entries from
+		the CoreSight bus into the Trace RAM. The value is read directly
+		from HW register RWP, 0x018.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/trg
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) Similar to "trigger_cntr" above except that this value is
+		read directly from HW register TRG, 0x01C.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/ctl
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) Shows the value held by the ETB Control register. The value
+		is read directly from HW register CTL, 0x020.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/ffsr
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) Shows the value held by the ETB Formatter and Flush Status
+		register.  The value is read directly from HW register FFSR,
+		0x300.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/ffcr
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) Shows the value held by the ETB Formatter and Flush Control
+		register.  The value is read directly from HW register FFCR,
+		0x304.

Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x

@@ -359,6 +359,19 @@ Contact:	Mathieu Poirier <[email protected]>
 Description:	(R) Print the content of the Peripheral ID3 Register
 		(0xFEC).  The value is taken directly from the HW.
 
+What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcconfig
+Date:		February 2016
+KernelVersion:	4.07
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) Print the content of the trace configuration register
+		(0x010) as currently set by SW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/mgmt/trctraceid
+Date:		February 2016
+KernelVersion:	4.07
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) Print the content of the trace ID register (0x040).
+
 What:		/sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr0
 Date:		April 2015
 KernelVersion:	4.01

Documentation/ABI/testing/sysfs-bus-coresight-devices-stm

@@ -0,0 +1,53 @@
+What:		/sys/bus/coresight/devices/<memory_map>.stm/enable_source
+Date:		April 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(RW) Enable/disable tracing on this specific trace macrocell.
+		Enabling the trace macrocell implies it has been configured
+		properly and a sink has been identified for it.  The path
+		of coresight components linking the source to the sink is
+		configured and managed automatically by the coresight framework.
+
+What:		/sys/bus/coresight/devices/<memory_map>.stm/hwevent_enable
+Date:		April 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(RW) Provides access to the HW event enable register, used in
+		conjunction with HW event bank select register.
+
+What:		/sys/bus/coresight/devices/<memory_map>.stm/hwevent_select
+Date:		April 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(RW) Gives access to the HW event block select register
+		(STMHEBSR) in order to configure up to 256 channels.  Used in
+		conjunction with "hwevent_enable" register as described above.
+
+What:		/sys/bus/coresight/devices/<memory_map>.stm/port_enable
+Date:		April 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(RW) Provides access to the stimulus port enable register
+		(STMSPER).  Used in conjunction with "port_select" described
+		below.
+
+What:		/sys/bus/coresight/devices/<memory_map>.stm/port_select
+Date:		April 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(RW) Used to determine which bank of stimulus port bit in
+		register STMSPER (see above) apply to.
+
+What:		/sys/bus/coresight/devices/<memory_map>.stm/status
+Date:		April 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) List various control and status registers.  The specific
+		layout and content is driver specific.
+
+What:		/sys/bus/coresight/devices/<memory_map>.stm/traceid
+Date:		April 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(RW) Holds the trace ID that will appear in the trace stream
+		coming from this trace entity.

Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc

@@ -6,3 +6,80 @@ Description:	(RW) Disables write access to the Trace RAM by stopping the
 		formatter after a defined number of words have been stored
 		following the trigger event. Additional interface for this
 		driver are expected to be added as it matures.
+
+What:           /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rsz
+Date:           March 2016
+KernelVersion:  4.7
+Contact:        Mathieu Poirier <[email protected]>
+Description:    (R) Defines the size, in 32-bit words, of the local RAM buffer.
+                The value is read directly from HW register RSZ, 0x004.
+
+What:           /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/sts
+Date:           March 2016
+KernelVersion:  4.7
+Contact:        Mathieu Poirier <[email protected]>
+Description:	(R) Shows the value held by the TMC status register.  The value
+                is read directly from HW register STS, 0x00C.
+
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rrp
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) Shows the value held by the TMC RAM Read Pointer register
+		that is used to read entries from the Trace RAM over the APB
+		interface.  The value is read directly from HW register RRP,
+		0x014.
+
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rwp
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) Shows the value held by the TMC RAM Write Pointer register
+		that is used to sets the write pointer to write entries from
+		the CoreSight bus into the Trace RAM. The value is read directly
+		from HW register RWP, 0x018.
+
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/trg
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) Similar to "trigger_cntr" above except that this value is
+		read directly from HW register TRG, 0x01C.
+
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ctl
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) Shows the value held by the TMC Control register. The value
+		is read directly from HW register CTL, 0x020.
+
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ffsr
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) Shows the value held by the TMC Formatter and Flush Status
+		register.  The value is read directly from HW register FFSR,
+		0x300.
+
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ffcr
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) Shows the value held by the TMC Formatter and Flush Control
+		register.  The value is read directly from HW register FFCR,
+		0x304.
+
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/mode
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) Shows the value held by the TMC Mode register, which
+		indicate the mode the device has been configured to enact.  The
+		The value is read directly from the MODE register, 0x028.
+
+What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/devid
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Mathieu Poirier <[email protected]>
+Description:	(R) Indicates the capabilities of the Coresight TMC.
+		The value is read directly from the DEVID register, 0xFC8,

Documentation/ABI/testing/sysfs-bus-mcb

@@ -0,0 +1,29 @@
+What:		/sys/bus/mcb/devices/mcb:X
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Johannes Thumshirn <[email protected]>
+Description:	Hardware chip or device hosting the MEN chameleon bus
+
+What:		/sys/bus/mcb/devices/mcb:X/revision
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Johannes Thumshirn <[email protected]>
+Description:	The FPGA's revision number
+
+What:		/sys/bus/mcb/devices/mcb:X/minor
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Johannes Thumshirn <[email protected]>
+Description:	The FPGA's minor number
+
+What:		/sys/bus/mcb/devices/mcb:X/model
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Johannes Thumshirn <[email protected]>
+Description:	The FPGA's model number
+
+What:		/sys/bus/mcb/devices/mcb:X/name
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Johannes Thumshirn <[email protected]>
+Description:	The FPGA's name

Documentation/ABI/testing/sysfs-class-stm

@@ -12,3 +12,13 @@ KernelVersion:	4.3
 Contact:	Alexander Shishkin <[email protected]>
 Description:
 		Shows the number of channels per master on this STM device.
+
+What:		/sys/class/stm/<stm>/hw_override
+Date:		March 2016
+KernelVersion:	4.7
+Contact:	Alexander Shishkin <[email protected]>
+Description:
+		Reads as 0 if master numbers in the STP stream produced by
+		this stm device will match the master numbers assigned by
+		the software or 1 if the stm hardware overrides software
+		assigned masters.

Documentation/devicetree/bindings/arm/coresight.txt

@@ -19,6 +19,7 @@ its hardware characteristcs.
 		- "arm,coresight-etm3x", "arm,primecell";
 		- "arm,coresight-etm4x", "arm,primecell";
 		- "qcom,coresight-replicator1x", "arm,primecell";
+		- "arm,coresight-stm", "arm,primecell"; [1]
 
 	* reg: physical base address and length of the register
 	  set(s) of the component.
@@ -36,6 +37,14 @@ its hardware characteristcs.
 	  layout using the generic DT graph presentation found in
 	  "bindings/graph.txt".
 
+* Additional required properties for System Trace Macrocells (STM):
+	* reg: along with the physical base address and length of the register
+	  set as described above, another entry is required to describe the
+	  mapping of the extended stimulus port area.
+
+	* reg-names: the only acceptable values are "stm-base" and
+	  "stm-stimulus-base", each corresponding to the areas defined in "reg".
+
 * Required properties for devices that don't show up on the AMBA bus, such as
   non-configurable replicators:
 
@@ -202,3 +211,22 @@ Example:
 			};
 		};
 	};
+
+4. STM
+	stm@20100000 {
+		compatible = "arm,coresight-stm", "arm,primecell";
+		reg = <0 0x20100000 0 0x1000>,
+		      <0 0x28000000 0 0x180000>;
+		reg-names = "stm-base", "stm-stimulus-base";
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		port {
+			stm_out_port: endpoint {
+				remote-endpoint = <&main_funnel_in_port2>;
+			};
+		};
+	};
+
+[1]. There is currently two version of STM: STM32 and STM500.  Both
+have the same HW interface and as such don't need an explicit binding name.

Documentation/trace/coresight.txt

@@ -190,8 +190,8 @@ expected to be accessed and controlled using those entries.
 Last but not least, "struct module *owner" is expected to be set to reflect
 the information carried in "THIS_MODULE".
 
-How to use
-----------
+How to use the tracer modules
+-----------------------------
 
 Before trace collection can start, a coresight sink needs to be identify.
 There is no limit on the amount of sinks (nor sources) that can be enabled at
@@ -297,3 +297,36 @@ Info                                    Tracing enabled
 Instruction     13570831        0x8026B584      E28DD00C        false   ADD      sp,sp,#0xc
 Instruction     0       0x8026B588      E8BD8000        true    LDM      sp!,{pc}
 Timestamp                                       Timestamp: 17107041535
+
+How to use the STM module
+-------------------------
+
+Using the System Trace Macrocell module is the same as the tracers - the only
+difference is that clients are driving the trace capture rather
+than the program flow through the code.
+
+As with any other CoreSight component, specifics about the STM tracer can be
+found in sysfs with more information on each entry being found in [1]:
+
+root@genericarmv8:~# ls /sys/bus/coresight/devices/20100000.stm
+enable_source   hwevent_select  port_enable     subsystem       uevent
+hwevent_enable  mgmt            port_select     traceid
+root@genericarmv8:~#
+
+Like any other source a sink needs to be identified and the STM enabled before
+being used:
+
+root@genericarmv8:~# echo 1 > /sys/bus/coresight/devices/20010000.etf/enable_sink
+root@genericarmv8:~# echo 1 > /sys/bus/coresight/devices/20100000.stm/enable_source
+
+From there user space applications can request and use channels using the devfs
+interface provided for that purpose by the generic STM API:
+
+root@genericarmv8:~# ls -l /dev/20100000.stm
+crw-------    1 root     root       10,  61 Jan  3 18:11 /dev/20100000.stm
+root@genericarmv8:~#
+
+Details on how to use the generic STM API can be found here [2].
+
+[1]. Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
+[2]. Documentation/trace/stm.txt

Documentation/w1/slaves/w1_therm

@@ -33,7 +33,15 @@ temperature conversion at a time.  If none of the devices are parasite
 powered it would be possible to convert all the devices at the same
 time and then go back to read individual sensors.  That isn't
 currently supported.  The driver also doesn't support reduced
-precision (which would also reduce the conversion time).
+precision (which would also reduce the conversion time) when reading values.
+
+Writing a value between 9 and 12 to the sysfs w1_slave file will change the
+precision of the sensor for the next readings. This value is in (volatile)
+SRAM, so it is reset when the sensor gets power-cycled.
+
+To store the current precision configuration into EEPROM, the value 0
+has to be written to the sysfs w1_slave file. Since the EEPROM has a limited
+amount of writes (>50k), this command should be used wisely.
 
 The module parameter strong_pullup can be set to 0 to disable the
 strong pullup, 1 to enable autodetection or 2 to force strong pullup.

MAINTAINERS

@@ -9843,6 +9843,7 @@ F:	drivers/mmc/host/dw_mmc*
 SYSTEM TRACE MODULE CLASS
 M:	Alexander Shishkin <[email protected]>
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm.git
 F:	Documentation/trace/stm.txt
 F:	drivers/hwtracing/stm/
 F:	include/linux/stm.h