Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
 "A few ARM fixes:

   - Robin Murphy noticed that the non-secure privileged entry was
     relying on undefined behaviour, which needed to be fixed.

   - Vladimir Murzin noticed that prov-v7 fails to build for MMUless
     configurations because a required header file wasn't included.

   - A bunch of fixes for StrongARM regressions found while testing
     4.8-rc on such platforms"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: sa1100: clear reset status prior to reboot
  ARM: 8600/1: Enforce some NS-SVC initialisation
  ARM: 8599/1: mm: pull asm/memory.h explicitly
  ARM: sa1100: register clocks early
  ARM: sa1100: fix 3.6864MHz clock

arch/arm/kernel/hyp-stub.S

@@ -142,6 +142,19 @@ ARM_BE8(orr	r7, r7, #(1 << 25))     @ HSCTLR.EE
 	and	r7, #0x1f		@ Preserve HPMN
 	mcr	p15, 4, r7, c1, c1, 1	@ HDCR
 
+	@ Make sure NS-SVC is initialised appropriately
+	mrc	p15, 0, r7, c1, c0, 0	@ SCTLR
+	orr	r7, #(1 << 5)		@ CP15 barriers enabled
+	bic	r7, #(3 << 7)		@ Clear SED/ITD for v8 (RES0 for v7)
+	bic	r7, #(3 << 19)		@ WXN and UWXN disabled
+	mcr	p15, 0, r7, c1, c0, 0	@ SCTLR
+
+	mrc	p15, 0, r7, c0, c0, 0	@ MIDR
+	mcr	p15, 4, r7, c0, c0, 0	@ VPIDR
+
+	mrc	p15, 0, r7, c0, c0, 5	@ MPIDR
+	mcr	p15, 4, r7, c0, c0, 5	@ VMPIDR
+
 #if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER)
 	@ make CNTP_* and CNTPCT accessible from PL1
 	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1

arch/arm/mach-sa1100/clock.c

@@ -125,6 +125,8 @@ static unsigned long clk_36864_get_rate(struct clk *clk)
 }
 
 static struct clkops clk_36864_ops = {
+	.enable		= clk_cpu_enable,
+	.disable	= clk_cpu_disable,
 	.get_rate	= clk_36864_get_rate,
 };
 
@@ -140,9 +142,8 @@ static struct clk_lookup sa11xx_clkregs[] = {
 	CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864),
 };
 
-static int __init sa11xx_clk_init(void)
+int __init sa11xx_clk_init(void)
 {
 	clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
 	return 0;
 }
-core_initcall(sa11xx_clk_init);

arch/arm/mach-sa1100/generic.c

@@ -34,6 +34,7 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/reset.h>
 
 #include "generic.h"
 #include <clocksource/pxa.h>
@@ -95,6 +96,8 @@ static void sa1100_power_off(void)
 
 void sa11x0_restart(enum reboot_mode mode, const char *cmd)
 {
+	clear_reset_status(RESET_STATUS_ALL);
+
 	if (mode == REBOOT_SOFT) {
 		/* Jump into ROM at address 0 */
 		soft_restart(0);
@@ -388,6 +391,7 @@ void __init sa1100_init_irq(void)
 	sa11x0_init_irq_nodt(IRQ_GPIO0_SC, irq_resource.start);
 
 	sa1100_init_gpio();
+	sa11xx_clk_init();
 }
 
 /*

arch/arm/mach-sa1100/generic.h

@@ -44,3 +44,5 @@ int sa11x0_pm_init(void);
 #else
 static inline int sa11x0_pm_init(void) { return 0; }
 #endif
+
+int sa11xx_clk_init(void);

arch/arm/mm/proc-v7.S

@@ -16,6 +16,7 @@
 #include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
+#include <asm/memory.h>
 
 #include "proc-macros.S"