Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Just simple overlapping changes. Signed-off-by: David S. Miller <[email protected]>
chewitt · Oct 6, 2017 · 53954cf · 53954cf
2 parents 4b54db1 + 7a92616
commit 53954cf
Show file tree

Hide file tree

Showing 566 changed files with 6,079 additions and 3,479 deletions.
diff --git a/.mailmap b/.mailmap
@@ -68,6 +68,8 @@ Jacob Shin <[email protected]>
 James Bottomley <jejb@mulgrave.(none)>
 James Bottomley <[email protected]>
 James E Wilson <[email protected]>
+James Hogan <[email protected]> <[email protected]>
+James Hogan <[email protected]> <[email protected]>
 James Ketrenos <jketreno@io.(none)>
 Javi Merino <[email protected]> <[email protected]>
 <[email protected]> <[email protected]>

diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
@@ -127,7 +127,7 @@ Description:
 
 What;		/sys/power/pm_trace_dev_match
 Date:		October 2010
-Contact:	James Hogan <[email protected]>
+Contact:	James Hogan <[email protected]>
 Description:
 		The /sys/power/pm_trace_dev_match file contains the name of the
 		device associated with the last PM event point saved in the RTC

diff --git a/Documentation/core-api/workqueue.rst b/Documentation/core-api/workqueue.rst
@@ -39,8 +39,8 @@ up.
 Although MT wq wasted a lot of resource, the level of concurrency
 provided was unsatisfactory.  The limitation was common to both ST and
 MT wq albeit less severe on MT.  Each wq maintained its own separate
-worker pool.  A MT wq could provide only one execution context per CPU
-while a ST wq one for the whole system.  Work items had to compete for
+worker pool.  An MT wq could provide only one execution context per CPU
+while an ST wq one for the whole system.  Work items had to compete for
 those very limited execution contexts leading to various problems
 including proneness to deadlocks around the single execution context.
 
@@ -151,7 +151,7 @@ Application Programming Interface (API)
 
 ``alloc_workqueue()`` allocates a wq.  The original
 ``create_*workqueue()`` functions are deprecated and scheduled for
-removal.  ``alloc_workqueue()`` takes three arguments - @``name``,
+removal.  ``alloc_workqueue()`` takes three arguments - ``@name``,
 ``@flags`` and ``@max_active``.  ``@name`` is the name of the wq and
 also used as the name of the rescuer thread if there is one.
 
@@ -197,7 +197,7 @@ resources, scheduled and executed.
   served by worker threads with elevated nice level.
 
   Note that normal and highpri worker-pools don't interact with
-  each other.  Each maintain its separate pool of workers and
+  each other.  Each maintains its separate pool of workers and
   implements concurrency management among its workers.
 
 ``WQ_CPU_INTENSIVE``
@@ -249,8 +249,8 @@ unbound worker-pools and only one work item could be active at any given
 time thus achieving the same ordering property as ST wq.
 
 In the current implementation the above configuration only guarantees
-ST behavior within a given NUMA node. Instead alloc_ordered_queue should
-be used to achieve system wide ST behavior.
+ST behavior within a given NUMA node. Instead ``alloc_ordered_queue()`` should
+be used to achieve system-wide ST behavior.
 
 
 Example Execution Scenarios

diff --git a/Documentation/cpu-freq/index.txt b/Documentation/cpu-freq/index.txt
@@ -32,8 +32,6 @@ cpufreq-stats.txt -	General description of sysfs cpufreq stats.
 
 index.txt	-	File index, Mailing list and Links (this document)
 
-intel-pstate.txt -	Intel pstate cpufreq driver specific file.
-
 pcc-cpufreq.txt -	PCC cpufreq driver specific file.
 
 

diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt
@@ -344,3 +344,4 @@ Version History
 	(wrong raid10_copies/raid10_format sequence)
 1.11.1  Add raid4/5/6 journal write-back support via journal_mode option
 1.12.1  fix for MD deadlock between mddev_suspend() and md_write_start() available
+1.13.0  Fix dev_health status at end of "recover" (was 'a', now 'A')
diff --git a/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt
@@ -32,7 +32,7 @@ Example:
 		compatible = "st,stm32h743-rcc", "st,stm32-rcc";
 		reg = <0x58024400 0x400>;
 		#reset-cells = <1>;
-		#clock-cells = <2>;
+		#clock-cells = <1>;
 		clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>;
 
 		st,syscfg = <&pwrcfg>;

diff --git a/Documentation/devicetree/bindings/leds/ams,as3645a.txt b/Documentation/devicetree/bindings/leds/ams,as3645a.txt
@@ -15,11 +15,14 @@ Required properties
 
 compatible	: Must be "ams,as3645a".
 reg		: The I2C address of the device. Typically 0x30.
+#address-cells	: 1
+#size-cells	: 0
 
 
-Required properties of the "flash" child node
-=============================================
+Required properties of the flash child node (0)
+===============================================
 
+reg: 0
 flash-timeout-us: Flash timeout in microseconds. The value must be in
 		  the range [100000, 850000] and divisible by 50000.
 flash-max-microamp: Maximum flash current in microamperes. Has to be
@@ -33,20 +36,21 @@ ams,input-max-microamp: Maximum flash controller input current. The
 			and divisible by 50000.
 
 
-Optional properties of the "flash" child node
-=============================================
+Optional properties of the flash child node
+===========================================
 
 label		: The label of the flash LED.
 
 
-Required properties of the "indicator" child node
-=================================================
+Required properties of the indicator child node (1)
+===================================================
 
+reg: 1
 led-max-microamp: Maximum indicator current. The allowed values are
 		  2500, 5000, 7500 and 10000.
 
-Optional properties of the "indicator" child node
-=================================================
+Optional properties of the indicator child node
+===============================================
 
 label		: The label of the indicator LED.
 
@@ -55,16 +59,20 @@ Example
 =======
 
 	as3645a@30 {
+		#address-cells: 1
+		#size-cells: 0
 		reg = <0x30>;
 		compatible = "ams,as3645a";
-		flash {
+		flash@0 {
+			reg = <0x0>;
 			flash-timeout-us = <150000>;
 			flash-max-microamp = <320000>;
 			led-max-microamp = <60000>;
 			ams,input-max-microamp = <1750000>;
 			label = "as3645a:flash";
 		};
-		indicator {
+		indicator@1 {
+			reg = <0x1>;
 			led-max-microamp = <10000>;
 			label = "as3645a:indicator";
 		};

diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt
@@ -21,8 +21,9 @@ Required properties:
 	- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
 	- GOP clock (for both armada-375-pp2 and armada-7k-pp2)
 	- MG clock (only for armada-7k-pp2)
-- clock-names: names of used clocks, must be "pp_clk", "gop_clk" and
-  "mg_clk" (the latter only for armada-7k-pp2).
+	- AXI clock (only for armada-7k-pp2)
+- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk"
+  and "axi_clk" (the 2 latter only for armada-7k-pp2).
 
 The ethernet ports are represented by subnodes. At least one port is
 required.
@@ -78,8 +79,9 @@ Example for marvell,armada-7k-pp2:
 cpm_ethernet: ethernet@0 {
 	compatible = "marvell,armada-7k-pp22";
 	reg = <0x0 0x100000>, <0x129000 0xb000>;
-	clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
-	clock-names = "pp_clk", "gop_clk", "gp_clk";
+	clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
+		 <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>;
+	clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk";
 
 	eth0: eth0 {
 		interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,

diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
@@ -4,6 +4,7 @@ The device node has following properties.
 
 Required properties:
  - compatible: should be "rockchip,<name>-gamc"
+   "rockchip,rk3128-gmac": found on RK312x SoCs
    "rockchip,rk3228-gmac": found on RK322x SoCs
    "rockchip,rk3288-gmac": found on RK3288 SoCs
    "rockchip,rk3328-gmac": found on RK3328 SoCs

diff --git a/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt
@@ -0,0 +1,28 @@
+Binding for the Synopsys HSDK reset controller
+
+This binding uses the common reset binding[1].
+
+[1] Documentation/devicetree/bindings/reset/reset.txt
+
+Required properties:
+- compatible: should be "snps,hsdk-reset".
+- reg: should always contain 2 pairs address - length: first for reset
+  configuration register and second for corresponding SW reset and status bits
+  register.
+- #reset-cells: from common reset binding; Should always be set to 1.
+
+Example:
+	reset: reset@880 {
+		compatible = "snps,hsdk-reset";
+		#reset-cells = <1>;
+		reg = <0x8A0 0x4>, <0xFF0 0x4>;
+	};
+
+Specifying reset lines connected to IP modules:
+	ethernet@.... {
+		....
+		resets = <&reset HSDK_V1_ETH_RESET>;
+		....
+	};
+
+The index could be found in <dt-bindings/reset/snps,hsdk-reset.h>
diff --git a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt
@@ -8,6 +8,12 @@ Required properties:
                    the firmware event log
 - linux,sml-size : size of the memory allocated for the firmware event log
 
+Optional properties:
+
+- powered-while-suspended: present when the TPM is left powered on between
+                           suspend and resume (makes the suspend/resume
+                           callbacks do nothing).
+
 Example (for OpenPower Systems with Nuvoton TPM 2.0 on I2C)
 ----------------------------------------------------------
 

diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -41,6 +41,8 @@ Required properties:
     - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
     - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART.
     - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART.
+    - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART.
+    - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART.
     - "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART.
     - "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART.
     - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -3,8 +3,8 @@ Device tree binding vendor prefix registry.  Keep list in alphabetical order.
 This isn't an exhaustive list, but you should add new prefixes to it before
 using them to avoid name-space collisions.
 
-abcn	Abracon Corporation
 abilis	Abilis Systems
+abracon	Abracon Corporation
 actions	Actions Semiconductor Co., Ltd.
 active-semi	Active-Semi International Inc
 ad	Avionic Design GmbH

diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt
@@ -196,12 +196,13 @@ struct driver_attribute {
 };
 
 Device drivers can export attributes via their sysfs directories. 
-Drivers can declare attributes using a DRIVER_ATTR macro that works
-identically to the DEVICE_ATTR macro. 
+Drivers can declare attributes using a DRIVER_ATTR_RW and DRIVER_ATTR_RO
+macro that works identically to the DEVICE_ATTR_RW and DEVICE_ATTR_RO
+macros.
 
 Example:
 
-DRIVER_ATTR(debug,0644,show_debug,store_debug);
+DRIVER_ATTR_RW(debug);
 
 This is equivalent to declaring:
 

diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
@@ -366,7 +366,8 @@ struct driver_attribute {
 
 Declaring:
 
-DRIVER_ATTR(_name, _mode, _show, _store)
+DRIVER_ATTR_RO(_name)
+DRIVER_ATTR_RW(_name)
 
 Creation/Removal:
 

diff --git a/MAINTAINERS b/MAINTAINERS
@@ -6738,7 +6738,7 @@ F:	Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
 F:	drivers/auxdisplay/img-ascii-lcd.c
 
 IMGTEC IR DECODER DRIVER
-M:	James Hogan <[email protected]>
+M:	James Hogan <[email protected]>
 S:	Maintained
 F:	drivers/media/rc/img-ir/
 
@@ -7562,7 +7562,7 @@ F:	arch/arm64/include/asm/kvm*
 F:	arch/arm64/kvm/
 
 KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
-M:	James Hogan <[email protected]>
+M:	James Hogan <[email protected]>
 L:	[email protected]
 S:	Supported
 F:	arch/mips/include/uapi/asm/kvm*
@@ -8264,6 +8264,12 @@ L:	[email protected]
 S:	Orphan
 F:	drivers/net/wireless/marvell/libertas/
 
+MARVELL MACCHIATOBIN SUPPORT
+M:	Russell King <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+
 MARVELL MV643XX ETHERNET DRIVER
 M:	Sebastian Hesselbarth <[email protected]>
 L:	[email protected]
@@ -8597,6 +8603,12 @@ M:	Sean Wang <[email protected]>
 S:	Maintained
 F:	drivers/media/rc/mtk-cir.c
 
+MEDIATEK PMIC LED DRIVER
+M:	Sean Wang <[email protected]>
+S:	Maintained
+F:	drivers/leds/leds-mt6323.c
+F:	Documentation/devicetree/bindings/leds/leds-mt6323.txt
+
 MEDIATEK ETHERNET DRIVER
 M:	Felix Fietkau <[email protected]>
 M:	John Crispin <[email protected]>
@@ -8879,7 +8891,7 @@ F:	Documentation/devicetree/bindings/media/meson-ao-cec.txt
 T:	git git://linuxtv.org/media_tree.git
 
 METAG ARCHITECTURE
-M:	James Hogan <[email protected]>
+M:	James Hogan <[email protected]>
 L:	[email protected]
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag.git
 S:	Odd Fixes
@@ -12924,9 +12936,9 @@ F:	drivers/mmc/host/dw_mmc*
 SYNOPSYS HSDK RESET CONTROLLER DRIVER
 M:	Eugeniy Paltsev <[email protected]>
 S:	Supported
-F:	drivers/reset/reset-hsdk-v1.c
-F:	include/dt-bindings/reset/snps,hsdk-v1-reset.h
-F:	Documentation/devicetree/bindings/reset/snps,hsdk-v1-reset.txt
+F:	drivers/reset/reset-hsdk.c
+F:	include/dt-bindings/reset/snps,hsdk-reset.h
+F:	Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt
 
 SYSTEM CONFIGURATION (SYSCON)
 M:	Lee Jones <[email protected]>

diff --git a/Makefile b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 14
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*
@@ -1172,11 +1172,11 @@ headers_check: headers_install
 
 PHONY += kselftest
 kselftest:
-	$(Q)$(MAKE) -C tools/testing/selftests run_tests
+	$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests run_tests
 
 PHONY += kselftest-clean
 kselftest-clean:
-	$(Q)$(MAKE) -C tools/testing/selftests clean
+	$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests clean
 
 PHONY += kselftest-merge
 kselftest-merge:

diff --git a/arch/alpha/include/asm/mmu_context.h b/arch/alpha/include/asm/mmu_context.h
@@ -8,6 +8,7 @@
  */
 
 #include <linux/mm_types.h>
+#include <linux/sched.h>
 
 #include <asm/machvec.h>
 #include <asm/compiler.h>

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
@@ -36,6 +36,8 @@
 		phy1 = &usb1_phy;
 		ethernet0 = &cpsw_emac0;
 		ethernet1 = &cpsw_emac1;
+		spi0 = &spi0;
+		spi1 = &spi1;
 	};
 
 	cpus {

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -388,6 +388,7 @@
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
+	slaves = <1>;
 };
 
 &davinci_mdio {
@@ -402,11 +403,6 @@
 	phy-mode = "rmii";
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rmii";
-};
-
 &phy_sel {
 	rmii-clock-ext;
 };