Merge branch 'upstream-fixes' into upstream

Documentation/fb/imacfb.txt

@@ -0,0 +1,31 @@
+
+What is imacfb?
+===============
+
+This is a generic EFI platform driver for Intel based Apple computers.
+Imacfb is only for EFI booted Intel Macs.
+
+Supported Hardware
+==================
+
+iMac 17"/20"
+Macbook
+Macbook Pro 15"/17"
+MacMini
+
+How to use it?
+==============
+
+Imacfb does not have any kind of autodetection of your machine.
+You have to add the fillowing kernel parameters in your elilo.conf:
+	Macbook :
+		video=imacfb:macbook
+	MacMini :
+		video=imacfb:mini
+	Macbook Pro 15", iMac 17" :
+		video=imacfb:i17
+	Macbook Pro 17", iMac 20" :
+		video=imacfb:i20
+
+--
+Edgar Hucek <[email protected]>

Documentation/kobject.txt

@@ -247,7 +247,7 @@ the object-specific fields, which include:
 - default_attrs: Default attributes to be exported via sysfs when the
   object is registered.Note that the last attribute has to be
   initialized to NULL ! You can find a complete implementation
-  in drivers/block/genhd.c
+  in block/genhd.c
 
 
 Instances of struct kobj_type are not registered; only referenced by

Documentation/networking/ip-sysctl.txt

@@ -294,15 +294,15 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
 	Default: 87380*2 bytes.
 
 tcp_mem - vector of 3 INTEGERs: min, pressure, max
-	low: below this number of pages TCP is not bothered about its
+	min: below this number of pages TCP is not bothered about its
 	memory appetite.
 
 	pressure: when amount of memory allocated by TCP exceeds this number
 	of pages, TCP moderates its memory consumption and enters memory
 	pressure mode, which is exited when memory consumption falls
-	under "low".
+	under "min".
 
-	high: number of pages allowed for queueing by all TCP sockets.
+	max: number of pages allowed for queueing by all TCP sockets.
 
 	Defaults are calculated at boot time from amount of available
 	memory.

Documentation/powerpc/booting-without-of.txt

@@ -1196,7 +1196,7 @@ platforms are moved over to use the flattened-device-tree model.
     - model : Model of the device.  Can be "TSEC", "eTSEC", or "FEC"
     - compatible : Should be "gianfar"
     - reg : Offset and length of the register set for the device
-    - address : List of bytes representing the ethernet address of
+    - mac-address : List of bytes representing the ethernet address of
       this controller
     - interrupts : <a b> where a is the interrupt number and b is a
       field that represents an encoding of the sense and level
@@ -1216,7 +1216,7 @@ platforms are moved over to use the flattened-device-tree model.
 		model = "TSEC";
 		compatible = "gianfar";
 		reg = <24000 1000>;
-		address = [ 00 E0 0C 00 73 00 ];
+		mac-address = [ 00 E0 0C 00 73 00 ];
 		interrupts = <d 3 e 3 12 3>;
 		interrupt-parent = <40000>;
 		phy-handle = <2452000>
@@ -1498,7 +1498,7 @@ not necessary as they are usually the same as the root node.
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <24000 1000>;
-			address = [ 00 E0 0C 00 73 00 ];
+			mac-address = [ 00 E0 0C 00 73 00 ];
 			interrupts = <d 3 e 3 12 3>;
 			interrupt-parent = <40000>;
 			phy-handle = <2452000>;
@@ -1511,7 +1511,7 @@ not necessary as they are usually the same as the root node.
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <25000 1000>;
-			address = [ 00 E0 0C 00 73 01 ];
+			mac-address = [ 00 E0 0C 00 73 01 ];
 			interrupts = <13 3 14 3 18 3>;
 			interrupt-parent = <40000>;
 			phy-handle = <2452001>;
@@ -1524,7 +1524,7 @@ not necessary as they are usually the same as the root node.
 			model = "FEC";
 			compatible = "gianfar";
 			reg = <26000 1000>;
-			address = [ 00 E0 0C 00 73 02 ];
+			mac-address = [ 00 E0 0C 00 73 02 ];
 			interrupts = <19 3>;
 			interrupt-parent = <40000>;
 			phy-handle = <2452002>;

MAINTAINERS

@@ -2674,6 +2674,14 @@ M:	[email protected]
 L:	[email protected]
 S:	Maintained
 
+STABLE BRANCH:
+P:	Greg Kroah-Hartman
+M:	[email protected]
+P:	Chris Wright
+M:	[email protected]
+L:	[email protected]
+S:	Maintained
+
 TPM DEVICE DRIVER
 P:	Kylene Hall
 M:	[email protected]

Makefile

@@ -309,9 +309,6 @@ CPPFLAGS        := -D__KERNEL__ $(LINUXINCLUDE)
 
 CFLAGS          := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
                    -fno-strict-aliasing -fno-common
-# Force gcc to behave correct even for buggy distributions
-CFLAGS          += $(call cc-option, -fno-stack-protector)
-
 AFLAGS          := -D__ASSEMBLY__
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
@@ -436,12 +433,13 @@ core-y		:= usr/
 endif # KBUILD_EXTMOD
 
 ifeq ($(dot-config),1)
-# In this section, we need .config
+# Read in config
+-include include/config/auto.conf
 
+ifeq ($(KBUILD_EXTMOD),)
 # Read in dependencies to all Kconfig* files, make sure to run
 # oldconfig if changes are detected.
 -include include/config/auto.conf.cmd
--include include/config/auto.conf
 
 # To avoid any implicit rule to kick in, define an empty command
 $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
@@ -451,16 +449,27 @@ $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
 # if auto.conf.cmd is missing then we are probably in a cleaned tree so
 # we execute the config step to be sure to catch updated Kconfig files
 include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
-ifeq ($(KBUILD_EXTMOD),)
 	$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
 else
-	$(error kernel configuration not valid - run 'make prepare' in $(srctree) to update it)
-endif
+# external modules needs include/linux/autoconf.h and include/config/auto.conf
+# but do not care if they are up-to-date. Use auto.conf to trigger the test
+PHONY += include/config/auto.conf
+
+include/config/auto.conf:
+	$(Q)test -e include/linux/autoconf.h -a -e $@ || (		\
+	echo;								\
+	echo "  ERROR: Kernel configuration is invalid.";		\
+	echo "         include/linux/autoconf.h or $@ are missing.";	\
+	echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";	\
+	echo;								\
+	/bin/false)
+
+endif # KBUILD_EXTMOD
 
 else
 # Dummy target needed, because used as prerequisite
 include/config/auto.conf: ;
-endif
+endif # $(dot-config)
 
 # The all: target is the default when no target is given on the
 # command line.
@@ -474,6 +483,8 @@ else
 CFLAGS		+= -O2
 endif
 
+include $(srctree)/arch/$(ARCH)/Makefile
+
 ifdef CONFIG_FRAME_POINTER
 CFLAGS		+= -fno-omit-frame-pointer $(call cc-option,-fno-optimize-sibling-calls,)
 else
@@ -488,7 +499,8 @@ ifdef CONFIG_DEBUG_INFO
 CFLAGS		+= -g
 endif
 
-include $(srctree)/arch/$(ARCH)/Makefile
+# Force gcc to behave correct even for buggy distributions
+CFLAGS          += $(call cc-option, -fno-stack-protector)
 
 # arch Makefile may override CC so keep this after arch Makefile is included
 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)

arch/arm/common/rtctime.c

@@ -68,6 +68,7 @@ void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc
 		rtc_time_to_tm(next_time, next);
 	}
 }
+EXPORT_SYMBOL(rtc_next_alarm_time);
 
 static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm)
 {

arch/arm/kernel/traps.c

@@ -233,7 +233,7 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 	spin_unlock_irq(&die_lock);
 
 	if (panic_on_oops)
-		panic("Fatal exception: panic_on_oops");
+		panic("Fatal exception");
 
 	do_exit(SIGSEGV);
 }

arch/arm/mach-ixp4xx/common-pci.c

@@ -532,8 +532,6 @@ pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
 	return -EIO;
 }
 
-EXPORT_SYMBOL(pci_set_dma_mask);
-EXPORT_SYMBOL(pci_set_consistent_dma_mask);
 EXPORT_SYMBOL(ixp4xx_pci_read);
 EXPORT_SYMBOL(ixp4xx_pci_write);
 

arch/arm/mach-ixp4xx/gtwx5715-setup.c

@@ -107,9 +107,9 @@ static struct flash_platform_data gtwx5715_flash_data = {
 	.width		= 2,
 };
 
-static struct gtw5715_flash_resource = {
+static struct resource gtwx5715_flash_resource = {
 	.flags		= IORESOURCE_MEM,
-}
+};
 
 static struct platform_device gtwx5715_flash = {
 	.name		= "IXP4XX-Flash",
@@ -130,9 +130,6 @@ static void __init gtwx5715_init(void)
 {
 	ixp4xx_sys_init();
 
-	if (!flash_resource)
-		printk(KERN_ERR "Could not allocate flash resource\n");
-
 	gtwx5715_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 	gtwx5715_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
 

arch/i386/kernel/traps.c

@@ -454,7 +454,7 @@ void die(const char * str, struct pt_regs * regs, long err)
 		panic("Fatal exception in interrupt");
 
 	if (panic_on_oops)
-		panic("Fatal exception: panic_on_oops");
+		panic("Fatal exception");
 
 	oops_exit();
 	do_exit(SIGSEGV);

arch/ia64/kernel/traps.c

@@ -118,7 +118,7 @@ die (const char *str, struct pt_regs *regs, long err)
 	spin_unlock_irq(&die.lock);
 
 	if (panic_on_oops)
-		panic("Fatal exception: panic_on_oops");
+		panic("Fatal exception");
 
   	do_exit(SIGSEGV);
 }

arch/powerpc/Kconfig

@@ -836,9 +836,10 @@ config MCA
 	bool
 
 config PCI
-	bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) \
-				  || MPC7448HPC2
-	default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx
+	bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
+		|| PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) || MPC7448HPC2
+	default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \
+		&& !PPC_85xx && !PPC_86xx
 	default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
 	default PCI_QSPAN if !4xx && !CPM2 && 8xx
 	help