Merge tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/…

…git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, wifi and ipsec.

  A little more changes than usual, but it's pretty normal for us that
  the rc3/rc4 PRs are oversized as people start testing in earnest.

  Possibly an extra boost from people deploying the 6.1 LTS but that's
  more of an unscientific hunch.

  Current release - regressions:

   - phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()

   - virtio: vsock: don't use skbuff state to account credit

   - virtio: vsock: don't drop skbuff on copy failure

   - virtio_net: fix page_to_skb() miscalculating the memory size

  Current release - new code bugs:

   - eth: correct xdp_features after device reconfig

   - wifi: nl80211: fix the puncturing bitmap policy

   - net/mlx5e: flower:
      - fix raw counter initialization
      - fix missing error code
      - fix cloned flow attribute

   - ipa:
      - fix some register validity checks
      - fix a surprising number of bad offsets
      - kill FILT_ROUT_CACHE_CFG IPA register

  Previous releases - regressions:

   - tcp: fix bind() conflict check for dual-stack wildcard address

   - veth: fix use after free in XDP_REDIRECT when skb headroom is small

   - ipv4: fix incorrect table ID in IOCTL path

   - ipvlan: make skb->skb_iif track skb->dev for l3s mode

   - mptcp:
      - fix possible deadlock in subflow_error_report
      - fix UaFs when destroying unaccepted and listening sockets

   - dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290

  Previous releases - always broken:

   - tcp: tcp_make_synack() can be called from process context, don't
     assume preemption is disabled when updating stats

   - netfilter: correct length for loading protocol registers

   - virtio_net: add checking sq is full inside xdp xmit

   - bonding: restore IFF_MASTER/SLAVE flags on bond enslave Ethertype
     change

   - phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number

   - eth: i40e: fix crash during reboot when adapter is in recovery mode

   - eth: ice: avoid deadlock on rtnl lock when auxiliary device
     plug/unplug meets bonding

   - dsa: mt7530:
      - remove now incorrect comment regarding port 5
      - set PLL frequency and trgmii only when trgmii is used

   - eth: mtk_eth_soc: reset PCS state when changing interface types

  Misc:

   - ynl: another license adjustment

   - move the TCA_EXT_WARN_MSG attribute for tc action"

* tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
  selftests: bonding: add tests for ether type changes
  bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails
  bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change
  net: renesas: rswitch: Fix GWTSDIE register handling
  net: renesas: rswitch: Fix the output value of quote from rswitch_rx()
  ethernet: sun: add check for the mdesc_grab()
  net: ipa: fix some register validity checks
  net: ipa: kill FILT_ROUT_CACHE_CFG IPA register
  net: ipa: add two missing declarations
  net: ipa: reg: include <linux/bug.h>
  net: xdp: don't call notifiers during driver init
  net/sched: act_api: add specific EXT_WARN_MSG for tc action
  Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
  net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795
  ynl: make the tooling check the license
  ynl: broaden the license even more
  tools: ynl: make definitions optional again
  hsr: ratelimit only when errors are printed
  qed/qed_mng_tlv: correctly zero out ->min instead of ->hour
  selftests: net: devlink_port_split.py: skip test if no suitable device available
  ...

.mailmap

@@ -215,6 +215,9 @@ Jens Axboe <[email protected]>
 Jens Osterkamp <[email protected]>
 Jernej Skrabec <[email protected]> <[email protected]>
 Jessica Zhang <[email protected]> <[email protected]>
+Jiri Pirko <[email protected]> <[email protected]>
+Jiri Pirko <[email protected]> <[email protected]>
+Jiri Pirko <[email protected]> <[email protected]>
 Jiri Slaby <[email protected]> <[email protected]>
 Jiri Slaby <[email protected]> <[email protected]>
 Jiri Slaby <[email protected]> <[email protected]>

Documentation/netlink/genetlink-c.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
 %YAML 1.2
 ---
 $id: http://kernel.org/schemas/netlink/genetlink-c.yaml#

Documentation/netlink/genetlink-legacy.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
 %YAML 1.2
 ---
 $id: http://kernel.org/schemas/netlink/genetlink-legacy.yaml#

Documentation/netlink/genetlink.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
 %YAML 1.2
 ---
 $id: http://kernel.org/schemas/netlink/genetlink-legacy.yaml#

Documentation/netlink/specs/ethtool.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
 
 name: ethtool
 

Documentation/netlink/specs/fou.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
 
 name: fou
 

Documentation/netlink/specs/netdev.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
 
 name: netdev
 
@@ -9,6 +9,7 @@ definitions:
   -
     type: flags
     name: xdp-act
+    render-max: true
     entries:
       -
         name: basic

Documentation/userspace-api/netlink/specs.rst

@@ -24,7 +24,8 @@ YAML specifications can be found under ``Documentation/netlink/specs/``
 This document describes details of the schema.
 See :doc:`intro-specs` for a practical starting guide.
 
-All specs must be licensed under ``GPL-2.0-only OR BSD-3-Clause``
+All specs must be licensed under
+``((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)``
 to allow for easy adoption in user space code.
 
 Compatibility levels

MAINTAINERS

@@ -5971,7 +5971,7 @@ F:	include/linux/dm-*.h
 F:	include/uapi/linux/dm-*.h
 
 DEVLINK
-M:	Jiri Pirko <jiri@nvidia.com>
+M:	Jiri Pirko <jiri@resnulli.us>
 L:	[email protected]
 S:	Supported
 F:	Documentation/networking/devlink
@@ -15079,7 +15079,7 @@ F:	Documentation/hwmon/nzxt-smart2.rst
 F:	drivers/hwmon/nzxt-smart2.c
 
 OBJAGG
-M:	Jiri Pirko <jiri@nvidia.com>
+M:	Jiri Pirko <jiri@resnulli.us>
 L:	[email protected]
 S:	Supported
 F:	include/linux/objagg.h
@@ -15853,7 +15853,7 @@ F:	drivers/video/logo/logo_parisc*
 F:	include/linux/hp_sdc.h
 
 PARMAN
-M:	Jiri Pirko <jiri@nvidia.com>
+M:	Jiri Pirko <jiri@resnulli.us>
 L:	[email protected]
 S:	Supported
 F:	include/linux/parman.h

drivers/net/bonding/bond_main.c

@@ -1775,6 +1775,19 @@ void bond_lower_state_changed(struct slave *slave)
 		slave_err(bond_dev, slave_dev, "Error: %s\n", errmsg);	\
 } while (0)
 
+/* The bonding driver uses ether_setup() to convert a master bond device
+ * to ARPHRD_ETHER, that resets the target netdevice's flags so we always
+ * have to restore the IFF_MASTER flag, and only restore IFF_SLAVE if it was set
+ */
+static void bond_ether_setup(struct net_device *bond_dev)
+{
+	unsigned int slave_flag = bond_dev->flags & IFF_SLAVE;
+
+	ether_setup(bond_dev);
+	bond_dev->flags |= IFF_MASTER | slave_flag;
+	bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+}
+
 /* enslave device <slave> to bond device <master> */
 int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
 		 struct netlink_ext_ack *extack)
@@ -1866,10 +1879,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
 
 			if (slave_dev->type != ARPHRD_ETHER)
 				bond_setup_by_slave(bond_dev, slave_dev);
-			else {
-				ether_setup(bond_dev);
-				bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
-			}
+			else
+				bond_ether_setup(bond_dev);
 
 			call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE,
 						 bond_dev);
@@ -2289,9 +2300,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
 			eth_hw_addr_random(bond_dev);
 		if (bond_dev->type != ARPHRD_ETHER) {
 			dev_close(bond_dev);
-			ether_setup(bond_dev);
-			bond_dev->flags |= IFF_MASTER;
-			bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+			bond_ether_setup(bond_dev);
 		}
 	}
 

drivers/net/can/cc770/cc770_platform.c

@@ -93,20 +93,20 @@ static int cc770_get_of_node_data(struct platform_device *pdev,
 	if (priv->can.clock.freq > 8000000)
 		priv->cpu_interface |= CPUIF_DMC;
 
-	if (of_get_property(np, "bosch,divide-memory-clock", NULL))
+	if (of_property_read_bool(np, "bosch,divide-memory-clock"))
 		priv->cpu_interface |= CPUIF_DMC;
-	if (of_get_property(np, "bosch,iso-low-speed-mux", NULL))
+	if (of_property_read_bool(np, "bosch,iso-low-speed-mux"))
 		priv->cpu_interface |= CPUIF_MUX;
 
 	if (!of_get_property(np, "bosch,no-comperator-bypass", NULL))
 		priv->bus_config |= BUSCFG_CBY;
-	if (of_get_property(np, "bosch,disconnect-rx0-input", NULL))
+	if (of_property_read_bool(np, "bosch,disconnect-rx0-input"))
 		priv->bus_config |= BUSCFG_DR0;
-	if (of_get_property(np, "bosch,disconnect-rx1-input", NULL))
+	if (of_property_read_bool(np, "bosch,disconnect-rx1-input"))
 		priv->bus_config |= BUSCFG_DR1;
-	if (of_get_property(np, "bosch,disconnect-tx1-output", NULL))
+	if (of_property_read_bool(np, "bosch,disconnect-tx1-output"))
 		priv->bus_config |= BUSCFG_DT1;
-	if (of_get_property(np, "bosch,polarity-dominant", NULL))
+	if (of_property_read_bool(np, "bosch,polarity-dominant"))
 		priv->bus_config |= BUSCFG_POL;
 
 	prop = of_get_property(np, "bosch,clock-out-frequency", &prop_size);

drivers/net/dsa/microchip/ksz_common.c

@@ -319,7 +319,7 @@ static const u16 ksz8795_regs[] = {
 	[S_BROADCAST_CTRL]		= 0x06,
 	[S_MULTICAST_CTRL]		= 0x04,
 	[P_XMII_CTRL_0]			= 0x06,
-	[P_XMII_CTRL_1]			= 0x56,
+	[P_XMII_CTRL_1]			= 0x06,
 };
 
 static const u32 ksz8795_masks[] = {

drivers/net/dsa/mt7530.c

@@ -430,8 +430,6 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
 	switch (interface) {
 	case PHY_INTERFACE_MODE_RGMII:
 		trgint = 0;
-		/* PLL frequency: 125MHz */
-		ncpo1 = 0x0c80;
 		break;
 	case PHY_INTERFACE_MODE_TRGMII:
 		trgint = 1;
@@ -462,38 +460,40 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
 	mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK,
 		   P6_INTF_MODE(trgint));
 
-	/* Lower Tx Driving for TRGMII path */
-	for (i = 0 ; i < NUM_TRGMII_CTRL ; i++)
-		mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
-			     TD_DM_DRVP(8) | TD_DM_DRVN(8));
-
-	/* Disable MT7530 core and TRGMII Tx clocks */
-	core_clear(priv, CORE_TRGMII_GSW_CLK_CG,
-		   REG_GSWCK_EN | REG_TRGMIICK_EN);
-
-	/* Setup the MT7530 TRGMII Tx Clock */
-	core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1));
-	core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0));
-	core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta));
-	core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta));
-	core_write(priv, CORE_PLL_GROUP4,
-		   RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN |
-		   RG_SYSPLL_BIAS_LPF_EN);
-	core_write(priv, CORE_PLL_GROUP2,
-		   RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN |
-		   RG_SYSPLL_POSDIV(1));
-	core_write(priv, CORE_PLL_GROUP7,
-		   RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) |
-		   RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
-
-	/* Enable MT7530 core and TRGMII Tx clocks */
-	core_set(priv, CORE_TRGMII_GSW_CLK_CG,
-		 REG_GSWCK_EN | REG_TRGMIICK_EN);
-
-	if (!trgint)
+	if (trgint) {
+		/* Lower Tx Driving for TRGMII path */
+		for (i = 0 ; i < NUM_TRGMII_CTRL ; i++)
+			mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
+				     TD_DM_DRVP(8) | TD_DM_DRVN(8));
+
+		/* Disable MT7530 core and TRGMII Tx clocks */
+		core_clear(priv, CORE_TRGMII_GSW_CLK_CG,
+			   REG_GSWCK_EN | REG_TRGMIICK_EN);
+
+		/* Setup the MT7530 TRGMII Tx Clock */
+		core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1));
+		core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0));
+		core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta));
+		core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta));
+		core_write(priv, CORE_PLL_GROUP4,
+			   RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN |
+			   RG_SYSPLL_BIAS_LPF_EN);
+		core_write(priv, CORE_PLL_GROUP2,
+			   RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN |
+			   RG_SYSPLL_POSDIV(1));
+		core_write(priv, CORE_PLL_GROUP7,
+			   RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) |
+			   RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
+
+		/* Enable MT7530 core and TRGMII Tx clocks */
+		core_set(priv, CORE_TRGMII_GSW_CLK_CG,
+			 REG_GSWCK_EN | REG_TRGMIICK_EN);
+	} else {
 		for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
 			mt7530_rmw(priv, MT7530_TRGMII_RD(i),
 				   RD_TAP_MASK, RD_TAP(16));
+	}
+
 	return 0;
 }
 
@@ -2201,7 +2201,7 @@ mt7530_setup(struct dsa_switch *ds)
 
 	mt7530_pll_setup(priv);
 
-	/* Enable Port 6 only; P5 as GMAC5 which currently is not supported */
+	/* Enable port 6 */
 	val = mt7530_read(priv, MT7530_MHWTRAP);
 	val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
 	val |= MHWTRAP_MANUAL;

drivers/net/dsa/mv88e6xxx/chip.c

@@ -3549,14 +3549,25 @@ static int mv88e6xxx_get_max_mtu(struct dsa_switch *ds, int port)
 		return 10240 - VLAN_ETH_HLEN - EDSA_HLEN - ETH_FCS_LEN;
 	else if (chip->info->ops->set_max_frame_size)
 		return 1632 - VLAN_ETH_HLEN - EDSA_HLEN - ETH_FCS_LEN;
-	return 1522 - VLAN_ETH_HLEN - EDSA_HLEN - ETH_FCS_LEN;
+	return ETH_DATA_LEN;
 }
 
 static int mv88e6xxx_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
 {
 	struct mv88e6xxx_chip *chip = ds->priv;
 	int ret = 0;
 
+	/* For families where we don't know how to alter the MTU,
+	 * just accept any value up to ETH_DATA_LEN
+	 */
+	if (!chip->info->ops->port_set_jumbo_size &&
+	    !chip->info->ops->set_max_frame_size) {
+		if (new_mtu > ETH_DATA_LEN)
+			return -EINVAL;
+
+		return 0;
+	}
+
 	if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port))
 		new_mtu += EDSA_HLEN;
 
@@ -3565,9 +3576,6 @@ static int mv88e6xxx_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
 		ret = chip->info->ops->port_set_jumbo_size(chip, port, new_mtu);
 	else if (chip->info->ops->set_max_frame_size)
 		ret = chip->info->ops->set_max_frame_size(chip, new_mtu);
-	else
-		if (new_mtu > 1522)
-			ret = -EINVAL;
 	mv88e6xxx_reg_unlock(chip);
 
 	return ret;

drivers/net/ethernet/amazon/ena/ena_ethtool.c

@@ -850,11 +850,20 @@ static int ena_set_channels(struct net_device *netdev,
 	struct ena_adapter *adapter = netdev_priv(netdev);
 	u32 count = channels->combined_count;
 	/* The check for max value is already done in ethtool */
-	if (count < ENA_MIN_NUM_IO_QUEUES ||
-	    (ena_xdp_present(adapter) &&
-	    !ena_xdp_legal_queue_count(adapter, count)))
+	if (count < ENA_MIN_NUM_IO_QUEUES)
 		return -EINVAL;
 
+	if (!ena_xdp_legal_queue_count(adapter, count)) {
+		if (ena_xdp_present(adapter))
+			return -EINVAL;
+
+		xdp_clear_features_flag(netdev);
+	} else {
+		xdp_set_features_flag(netdev,
+				      NETDEV_XDP_ACT_BASIC |
+				      NETDEV_XDP_ACT_REDIRECT);
+	}
+
 	return ena_update_queue_count(adapter, count);
 }
 

drivers/net/ethernet/amazon/ena/ena_netdev.c

@@ -4105,8 +4105,6 @@ static void ena_set_conf_feat_params(struct ena_adapter *adapter,
 	/* Set offload features */
 	ena_set_dev_offloads(feat, netdev);
 
-	netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT;
-
 	adapter->max_mtu = feat->dev_attr.max_mtu;
 	netdev->max_mtu = adapter->max_mtu;
 	netdev->min_mtu = ENA_MIN_MTU;
@@ -4393,6 +4391,10 @@ static int ena_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	ena_config_debug_area(adapter);
 
+	if (ena_xdp_legal_queue_count(adapter, adapter->num_io_queues))
+		netdev->xdp_features = NETDEV_XDP_ACT_BASIC |
+				       NETDEV_XDP_ACT_REDIRECT;
+
 	memcpy(adapter->netdev->perm_addr, adapter->mac_addr, netdev->addr_len);
 
 	netif_carrier_off(netdev);

drivers/net/ethernet/aquantia/atlantic/aq_ring.c

@@ -412,6 +412,25 @@ int aq_xdp_xmit(struct net_device *dev, int num_frames,
 	return num_frames - drop;
 }
 
+static struct sk_buff *aq_xdp_build_skb(struct xdp_buff *xdp,
+					struct net_device *dev,
+					struct aq_ring_buff_s *buff)
+{
+	struct xdp_frame *xdpf;
+	struct sk_buff *skb;
+
+	xdpf = xdp_convert_buff_to_frame(xdp);
+	if (unlikely(!xdpf))
+		return NULL;
+
+	skb = xdp_build_skb_from_frame(xdpf, dev);
+	if (!skb)
+		return NULL;
+
+	aq_get_rxpages_xdp(buff, xdp);
+	return skb;
+}
+
 static struct sk_buff *aq_xdp_run_prog(struct aq_nic_s *aq_nic,
 				       struct xdp_buff *xdp,
 				       struct aq_ring_s *rx_ring,
@@ -431,7 +450,7 @@ static struct sk_buff *aq_xdp_run_prog(struct aq_nic_s *aq_nic,
 
 	prog = READ_ONCE(rx_ring->xdp_prog);
 	if (!prog)
-		goto pass;
+		return aq_xdp_build_skb(xdp, aq_nic->ndev, buff);
 
 	prefetchw(xdp->data_hard_start); /* xdp_frame write */
 
@@ -442,17 +461,12 @@ static struct sk_buff *aq_xdp_run_prog(struct aq_nic_s *aq_nic,
 	act = bpf_prog_run_xdp(prog, xdp);
 	switch (act) {
 	case XDP_PASS:
-pass:
-		xdpf = xdp_convert_buff_to_frame(xdp);
-		if (unlikely(!xdpf))
-			goto out_aborted;
-		skb = xdp_build_skb_from_frame(xdpf, aq_nic->ndev);
+		skb = aq_xdp_build_skb(xdp, aq_nic->ndev, buff);
 		if (!skb)
 			goto out_aborted;
 		u64_stats_update_begin(&rx_ring->stats.rx.syncp);
 		++rx_ring->stats.rx.xdp_pass;
 		u64_stats_update_end(&rx_ring->stats.rx.syncp);
-		aq_get_rxpages_xdp(buff, xdp);
 		return skb;
 	case XDP_TX:
 		xdpf = xdp_convert_buff_to_frame(xdp);