Merge branch 'next/arm64' into next/dt

Merging in the few patches I had kept separate from main next/dt, since others got merged here directly. * next/arm64: arm64: defconfig: Enable PCI generic host bridge by default arm64: Juno: Add support for the PCIe host bridge on Juno R1 Documentation: of: Document the bindings used by Juno R1 PCIe host bridge arm64: dts: mt8173: Add clocks for SCPSYS unit arm64: dts: mt8173: Add subsystem clock controller device nodes + Linux 4.3-rc5
chewitt · Nov 10, 2015 · 3e4dda7 · 3e4dda7
2 parents 1b38b0e + 8713181
commit 3e4dda7
Show file tree

Hide file tree

Showing 150 changed files with 938 additions and 394 deletions.
diff --git a/Documentation/device-mapper/snapshot.txt b/Documentation/device-mapper/snapshot.txt
@@ -41,9 +41,13 @@ useless and be disabled, returning errors.  So it is important to monitor
 the amount of free space and expand the <COW device> before it fills up.
 
 <persistent?> is P (Persistent) or N (Not persistent - will not survive
-after reboot).
-The difference is that for transient snapshots less metadata must be
-saved on disk - they can be kept in memory by the kernel.
+after reboot).  O (Overflow) can be added as a persistent store option
+to allow userspace to advertise its support for seeing "Overflow" in the
+snapshot status.  So supported store types are "P", "PO" and "N".
+
+The difference between persistent and transient is with transient
+snapshots less metadata must be saved on disk - they can be kept in
+memory by the kernel.
 
 
 * snapshot-merge <origin> <COW device> <persistent> <chunksize>

diff --git a/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt b/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt
@@ -0,0 +1,10 @@
+* ARM Juno R1 PCIe interface
+
+This PCIe host controller is based on PLDA XpressRICH3-AXI IP
+and thus inherits all the common properties defined in plda,xpressrich3-axi.txt
+as well as the base properties defined in host-generic-pci.txt.
+
+Required properties:
+ - compatible: "arm,juno-r1-pcie"
+ - dma-coherent: The host controller bridges the AXI transactions into PCIe bus
+   in a manner that makes the DMA operations to appear coherent to the CPUs.
diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt
@@ -0,0 +1,12 @@
+* PLDA XpressRICH3-AXI host controller
+
+The PLDA XpressRICH3-AXI host controller can be configured in a manner that
+makes it compliant with the SBSA[1] standard published by ARM Ltd. For those
+scenarios, the host-generic-pci.txt bindings apply with the following additions
+to the compatible property:
+
+Required properties:
+ - compatible: should contain "plda,xpressrich3-axi" to identify the IP used.
+
+
+[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0029a/
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt
@@ -51,7 +51,7 @@ Optional properties, deprecated for soctype-specific bindings:
 - renesas,tx-fifo-size : Overrides the default tx fifo size given in words
 			 (default is 64)
 - renesas,rx-fifo-size : Overrides the default rx fifo size given in words
-			 (default is 64, or 256 on R-Car Gen2)
+			 (default is 64)
 
 Pinctrl properties might be needed, too.  See
 Documentation/devicetree/bindings/pinctrl/renesas,*.

diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -5,6 +5,7 @@ Required properties:
 	- "renesas,usbhs-r8a7790"
 	- "renesas,usbhs-r8a7791"
 	- "renesas,usbhs-r8a7794"
+	- "renesas,usbhs-r8a7795"
   - reg: Base address and length of the register for the USBHS
   - interrupts: Interrupt specifier for the USBHS
   - clocks: A list of phandle + clock specifier pairs

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -169,6 +169,7 @@ pericom	Pericom Technology Inc.
 phytec	PHYTEC Messtechnik GmbH
 picochip	Picochip Ltd
 plathome	Plat'Home Co., Ltd.
+plda	PLDA
 pixcir  PIXCIR MICROELECTRONICS Co., Ltd
 powervr	PowerVR (deprecated, use img)
 qca	Qualcomm Atheros, Inc.

diff --git a/MAINTAINERS b/MAINTAINERS
@@ -4010,7 +4010,7 @@ S:	Maintained
 F:	sound/usb/misc/ua101.c
 
 EXTENSIBLE FIRMWARE INTERFACE (EFI)
-M:	Matt Fleming <matt[email protected]>
+M:	Matt Fleming <matt@codeblueprint.co.uk>
 L:	[email protected]
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git
 S:	Maintained
@@ -4025,7 +4025,7 @@ F:	include/linux/efi*.h
 EFI VARIABLE FILESYSTEM
 M:	Matthew Garrett <[email protected]>
 M:	Jeremy Kerr <[email protected]>
-M:	Matt Fleming <matt[email protected]>
+M:	Matt Fleming <matt@codeblueprint.co.uk>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git
 L:	[email protected]
 S:	Maintained
@@ -9921,7 +9921,6 @@ S:	Maintained
 F:	drivers/staging/lustre
 
 STAGING - NVIDIA COMPLIANT EMBEDDED CONTROLLER INTERFACE (nvec)
-M:	Julian Andres Klode <[email protected]>
 M:	Marc Dietrich <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 L:	[email protected]
@@ -11385,15 +11384,6 @@ W:	http://oops.ghostprotocols.net:81/blog
 S:	Maintained
 F:	drivers/net/wireless/wl3501*
 
-WM97XX TOUCHSCREEN DRIVERS
-M:	Mark Brown <[email protected]>
-M:	Liam Girdwood <[email protected]>
-L:	[email protected]
-W:	https://github.com/CirrusLogic/linux-drivers/wiki
-S:	Supported
-F:	drivers/input/touchscreen/*wm97*
-F:	include/linux/wm97xx.h
-
 WOLFSON MICROELECTRONICS DRIVERS
 L:	[email protected]
 T:	git https://github.com/CirrusLogic/linux-drivers.git

diff --git a/Makefile b/Makefile
@@ -1,8 +1,8 @@
 VERSION = 4
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
-NAME = Hurr durr I'ma sheep
+EXTRAVERSION = -rc5
+NAME = Blurry Fish Butt
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

diff --git a/arch/alpha/include/asm/word-at-a-time.h b/arch/alpha/include/asm/word-at-a-time.h
@@ -52,4 +52,6 @@ static inline unsigned long find_zero(unsigned long bits)
 #endif
 }
 
+#define zero_bytemask(mask) ((2ul << (find_zero(mask) * 8)) - 1)
+
 #endif /* _ASM_WORD_AT_A_TIME_H */
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -197,6 +197,7 @@
 				regulator-name = "P1.8V_LDO_OUT10";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 			};
 
 			ldo11_reg: LDO11 {

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
@@ -1117,7 +1117,7 @@
 		interrupt-parent = <&combiner>;
 		interrupts = <3 0>;
 		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
+		clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
 		power-domains = <&disp_pd>;
 		#iommu-cells = <0>;
 	};

diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts
@@ -36,7 +36,7 @@
 		pinctrl-0 = <&pinctrl_pmic>;
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <23 0x8>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
 		regulators {
 			sw1_reg: sw1a {
 				regulator-name = "SW1";

diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/clock/imx5-clock.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	aliases {

diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -35,7 +35,6 @@
 			compatible = "regulator-fixed";
 			reg = <1>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1>;
 			regulator-name = "usbh1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -47,7 +46,6 @@
 			compatible = "regulator-fixed";
 			reg = <2>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbotg>;
 			regulator-name = "usb_otg_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1627,6 +1627,7 @@
 				"mix.0", "mix.1",
 				"dvc.0", "dvc.1",
 				"clk_a", "clk_b", "clk_c", "clk_i";
+		power-domains = <&cpg_clocks>;
 
 		status = "disabled";
 

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1677,6 +1677,7 @@
 				"mix.0", "mix.1",
 				"dvc.0", "dvc.1",
 				"clk_a", "clk_b", "clk_c", "clk_i";
+		power-domains = <&cpg_clocks>;
 
 		status = "disabled";
 

diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -20,6 +20,7 @@
 #include <asm/cputype.h>
 #include <asm/cp15.h>
 #include <asm/mcpm.h>
+#include <asm/smp_plat.h>
 
 #include "regs-pmu.h"
 #include "common.h"
@@ -70,7 +71,31 @@ static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
 		cluster >= EXYNOS5420_NR_CLUSTERS)
 		return -EINVAL;
 
-	exynos_cpu_power_up(cpunr);
+	if (!exynos_cpu_power_state(cpunr)) {
+		exynos_cpu_power_up(cpunr);
+
+		/*
+		 * This assumes the cluster number of the big cores(Cortex A15)
+		 * is 0 and the Little cores(Cortex A7) is 1.
+		 * When the system was booted from the Little core,
+		 * they should be reset during power up cpu.
+		 */
+		if (cluster &&
+		    cluster == MPIDR_AFFINITY_LEVEL(cpu_logical_map(0), 1)) {
+			/*
+			 * Before we reset the Little cores, we should wait
+			 * the SPARE2 register is set to 1 because the init
+			 * codes of the iROM will set the register after
+			 * initialization.
+			 */
+			while (!pmu_raw_readl(S5P_PMU_SPARE2))
+				udelay(10);
+
+			pmu_raw_writel(EXYNOS5420_KFC_CORE_RESET(cpu),
+					EXYNOS_SWRESET);
+		}
+	}
+
 	return 0;
 }
 

diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
@@ -513,6 +513,12 @@ static inline unsigned int exynos_pmu_cpunr(unsigned int mpidr)
 #define SPREAD_ENABLE						0xF
 #define SPREAD_USE_STANDWFI					0xF
 
+#define EXYNOS5420_KFC_CORE_RESET0				BIT(8)
+#define EXYNOS5420_KFC_ETM_RESET0				BIT(20)
+
+#define EXYNOS5420_KFC_CORE_RESET(_nr)				\
+	((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr))
+
 #define EXYNOS5420_BB_CON1					0x0784
 #define EXYNOS5420_BB_SEL_EN					BIT(31)
 #define EXYNOS5420_BB_PMOS_EN					BIT(7)

diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -141,6 +141,26 @@
 
 	#include "juno-base.dtsi"
 
+	pcie-controller@40000000 {
+		compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic";
+		device_type = "pci";
+		reg = <0 0x40000000 0 0x10000000>;	/* ECAM config space */
+		bus-range = <0 255>;
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		dma-coherent;
+		ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>,
+			 <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
+			 <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>,
+				<0 0 0 2 &gic 0 0 0 137 4>,
+				<0 0 0 3 &gic 0 0 0 138 4>,
+				<0 0 0 4 &gic 0 0 0 139 4>;
+		msi-parent = <&v2m_0>;
+	};
 };
 
 &memtimer {

diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
@@ -586,3 +586,106 @@
 		samsung,pin-drv = <2>;
 	};
 };
+
+&pinctrl_bus1 {
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf5: gpf5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv6: gpv6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi5_bus: spi5-bus {
+		samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out {
+		samsung,pins = "gpg2-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
+	ufs_rst_n: ufs-rst-n {
+		samsung,pins = "gph1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};