Merge tag 'sound-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kern…

…el/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "There have been little changes in ALSA core stuff, but ASoC core still
  kept rolling for the continued restructuring. The rest are lots of
  small driver-specific changes and some minor API updates. Here are
  highlights:

  General:
  - Appropriate fall-through annotations everywhere
  - Some code cleanup in memalloc code, handling non-cacahed pages more
    commonly in the helper
  - Deployment of SNDRV_PCM_INFO_SYNC_APPLPTR flag consistently

  Drivers:
  - More HD-audio CA0132 codec improvement for supporting other Creative
    boards
  - Plumbing legacy HD-audio codecs as ASoC BE on Intel SST; this will
    give move support of existing HD-audio devices with DSP
  - A few device-specific HD-audio quirks as usual
  - New quirk for RME CC devices and correction for B&W PX for USB-audio
  - FireWire: code refactoring including devres usages

  ASoC Core:
  - Continued componentization works; it's almost done!
  - A bunch of new for_each_foo macros
  - Cleanups and fixes in DAPM code

  ASoC Drivers:
  - MCLK support for several different devices, including CS42L51, STM32
    SAI, and MAX98373
  - Support for Allwinner A64 CODEC analog, Intel boards with DA7219 and
    MAX98927, Meson AXG PDM inputs, Nuvoton NAU8822, Renesas R8A7744 and
    TI PCM3060"

* tag 'sound-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (299 commits)
  ASoC: stm32: sai: fix master clock naming
  ASoC: stm32: add clock dependency for sai
  ALSA: hda/ca0132 - Actually fix microphone issue
  ASoC: sun4i-i2s: move code from startup/shutdown hooks into pm_runtime hooks
  ASoC: wm2000: Remove wm2000_read helper function
  ASoC: cs42l51: fix mclk support
  ASoC: wm_adsp: Log addresses as 8 digits in wm_adsp_buffer_populate
  ASoC: wm_adsp: Rename memory fields in wm_adsp_buffer
  ASoC: cs42l51: add mclk support
  ASoC: stm32: sai: set sai as mclk clock provider
  ASoC: dt-bindings: add mclk support to cs42l51
  ASoC: dt-bindings: add mclk provider support to stm32 sai
  ASoC: soc-core: fix trivial checkpatch issues
  ASoC: dapm: Add support for hw_free on CODEC to CODEC links
  ASoC: Intel: kbl_da7219_max98927: minor white space clean up
  ALSA: i2c/cs8427: Fix int to char conversion
  ALSA: doc: Brush up the old writing-an-alsa-driver
  ASoC: rsnd: tidyup SSICR::SWSP for TDM
  ASoC: rsnd: enable TDM settings for SSI parent
  ASoC: pcm3168a: add hw constraint for capture channel
  ...

Documentation/devicetree/bindings/sound/adi,adau1977.txt

@@ -0,0 +1,54 @@
+Analog Devices ADAU1977/ADAU1978/ADAU1979
+
+Datasheets:
+http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1977.pdf
+http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1978.pdf
+http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1979.pdf
+
+This driver supports both the I2C and SPI bus.
+
+Required properties:
+ - compatible: Should contain one of the following:
+               "adi,adau1977"
+               "adi,adau1978"
+               "adi,adau1979"
+
+ - AVDD-supply: analog power supply for the device, please consult
+                Documentation/devicetree/bindings/regulator/regulator.txt
+
+Optional properties:
+ - reset-gpio:  the reset pin for the chip, for more details consult
+                Documentation/devicetree/bindings/gpio/gpio.txt
+
+ - DVDD-supply: supply voltage for the digital core, please consult
+                Documentation/devicetree/bindings/regulator/regulator.txt
+
+For required properties on SPI, please consult
+Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Required properties on I2C:
+
+ - reg:         The i2c address. Value depends on the state of ADDR0
+                and ADDR1, as wired in hardware.
+
+Examples:
+
+	adau1977_spi: adau1977@0 {
+		compatible = "adi,adau1977";
+		spi-max-frequency = <600000>;
+
+		AVDD-supply = <&regulator>;
+		DVDD-supply = <&regulator_digital>;
+
+		reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>;
+	};
+
+	adau1977_i2c: adau1977@11 {
+		compatible = "adi,adau1977";
+		reg = <0x11>;
+
+		AVDD-supply = <&regulator>;
+		DVDD-supply = <&regulator_digital>;
+
+		reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>;
+	};

Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt

@@ -0,0 +1,24 @@
+* Amlogic Audio PDM input
+
+Required properties:
+- compatible: 'amlogic,axg-pdm'
+- reg: physical base address of the controller and length of memory
+       mapped region.
+- clocks: list of clock phandle, one for each entry clock-names.
+- clock-names: should contain the following:
+  * "pclk"   : peripheral clock.
+  * "dclk"   : pdm digital clock
+  * "sysclk" : dsp system clock
+- #sound-dai-cells: must be 0.
+
+Example of PDM on the A113 SoC:
+
+pdm: audio-controller@ff632000 {
+	compatible = "amlogic,axg-pdm";
+	reg = <0x0 0xff632000 0x0 0x34>;
+	#sound-dai-cells = <0>;
+	clocks = <&clkc_audio AUD_CLKID_PDM>,
+		 <&clkc_audio AUD_CLKID_PDM_DCLK>,
+		 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+	clock-names = "pclk", "dclk", "sysclk";
+};

Documentation/devicetree/bindings/sound/cs42l51.txt

@@ -0,0 +1,17 @@
+CS42L51 audio CODEC
+
+Optional properties:
+
+  - clocks : a list of phandles + clock-specifiers, one for each entry in
+    clock-names
+
+  - clock-names : must contain "MCLK"
+
+Example:
+
+cs42l51: cs42l51@4a {
+	compatible = "cirrus,cs42l51";
+	reg = <0x4a>;
+	clocks = <&mclk_prov>;
+	clock-names = "MCLK";
+};

Documentation/devicetree/bindings/sound/maxim,max98088.txt

@@ -0,0 +1,23 @@
+MAX98088 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible: "maxim,max98088" or "maxim,max98089".
+- reg: The I2C address of the device.
+
+Optional properties:
+
+- clocks: the clock provider of MCLK, see ../clock/clock-bindings.txt section
+  "consumer" for more information.
+- clock-names: must be set to "mclk"
+
+Example:
+
+max98089: codec@10 {
+	compatible = "maxim,max98089";
+	reg = <0x10>;
+	clocks = <&clks IMX6QDL_CLK_CKO2>;
+	clock-names = "mclk";
+};

Documentation/devicetree/bindings/sound/mikroe,mikroe-proto.txt

@@ -0,0 +1,23 @@
+Mikroe-PROTO audio board
+
+Required properties:
+  - compatible: "mikroe,mikroe-proto"
+  - dai-format: Must be "i2s".
+  - i2s-controller: The phandle of the I2S controller.
+  - audio-codec: The phandle of the WM8731 audio codec.
+Optional properties:
+  - model: The user-visible name of this sound complex.
+  - bitclock-master: Indicates dai-link bit clock master; for details see simple-card.txt (1).
+  - frame-master: Indicates dai-link frame master; for details see simple-card.txt (1).
+
+(1) : There must be the same master for both bit and frame clocks.
+
+Example:
+	sound {
+		compatible = "mikroe,mikroe-proto";
+		model = "wm8731 @ sama5d2_xplained";
+		i2s-controller = <&i2s0>;
+		audio-codec = <&wm8731>;
+		dai-format = "i2s";
+        };
+};

Documentation/devicetree/bindings/sound/nau8822.txt

@@ -0,0 +1,16 @@
+NAU8822 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "nuvoton,nau8822"
+
+  - reg : the I2C address of the device.
+
+Example:
+
+codec: nau8822@1a {
+	compatible = "nuvoton,nau8822";
+	reg = <0x1a>;
+};

Documentation/devicetree/bindings/sound/pcm3060.txt

@@ -0,0 +1,17 @@
+PCM3060 audio CODEC
+
+This driver supports both I2C and SPI.
+
+Required properties:
+
+- compatible: "ti,pcm3060"
+
+- reg : the I2C address of the device for I2C, the chip select
+        number for SPI.
+
+Examples:
+
+	pcm3060: pcm3060@46 {
+		 compatible = "ti,pcm3060";
+		 reg = <0x46>;
+	};

Documentation/devicetree/bindings/sound/qcom,q6afe.txt

@@ -49,7 +49,7 @@ configuration of each dai. Must contain the following properties.
 	Usage: required for mi2s interface
 	Value type: <prop-encoded-array>
 	Definition: Must be list of serial data lines used by this dai.
-	should be one or more of the 1-4 sd lines.
+	should be one or more of the 0-3 sd lines.
 
  - qcom,tdm-sync-mode:
 	Usage: required for tdm interface
@@ -137,42 +137,42 @@ q6afe@4 {
 
 		prim-mi2s-rx@16 {
 			reg = <16>;
-			qcom,sd-lines = <1 3>;
+			qcom,sd-lines = <0 2>;
 		};
 
 		prim-mi2s-tx@17 {
 			reg = <17>;
-			qcom,sd-lines = <2>;
+			qcom,sd-lines = <1>;
 		};
 
 		sec-mi2s-rx@18 {
 			reg = <18>;
-			qcom,sd-lines = <1 4>;
+			qcom,sd-lines = <0 3>;
 		};
 
 		sec-mi2s-tx@19 {
 			reg = <19>;
-			qcom,sd-lines = <2>;
+			qcom,sd-lines = <1>;
 		};
 
 		tert-mi2s-rx@20 {
 			reg = <20>;
-			qcom,sd-lines = <2 4>;
+			qcom,sd-lines = <1 3>;
 		};
 
 		tert-mi2s-tx@21 {
 			reg = <21>;
-			qcom,sd-lines = <1>;
+			qcom,sd-lines = <0>;
 		};
 
 		quat-mi2s-rx@22 {
 			reg = <22>;
-			qcom,sd-lines = <1>;
+			qcom,sd-lines = <0>;
 		};
 
 		quat-mi2s-tx@23 {
 			reg = <23>;
-			qcom,sd-lines = <2>;
+			qcom,sd-lines = <1>;
 		};
 	};
 };

Documentation/devicetree/bindings/sound/renesas,rsnd.txt

@@ -340,10 +340,12 @@ Required properties:
 - compatible			: "renesas,rcar_sound-<soctype>", fallbacks
 				  "renesas,rcar_sound-gen1" if generation1, and
 				  "renesas,rcar_sound-gen2" if generation2 (or RZ/G1)
-				  "renesas,rcar_sound-gen3" if generation3
+				  "renesas,rcar_sound-gen3" if generation3 (or RZ/G2)
 				  Examples with soctypes are:
 				    - "renesas,rcar_sound-r8a7743" (RZ/G1M)
+				    - "renesas,rcar_sound-r8a7744" (RZ/G1N)
 				    - "renesas,rcar_sound-r8a7745" (RZ/G1E)
+				    - "renesas,rcar_sound-r8a774a1" (RZ/G2M)
 				    - "renesas,rcar_sound-r8a7778" (R-Car M1A)
 				    - "renesas,rcar_sound-r8a7779" (R-Car H1)
 				    - "renesas,rcar_sound-r8a7790" (R-Car H2)
@@ -353,6 +355,7 @@ Required properties:
 				    - "renesas,rcar_sound-r8a7795" (R-Car H3)
 				    - "renesas,rcar_sound-r8a7796" (R-Car M3-W)
 				    - "renesas,rcar_sound-r8a77965" (R-Car M3-N)
+				    - "renesas,rcar_sound-r8a77990" (R-Car E3)
 - reg				: Should contain the register physical address.
 				  required register is
 				   SRU/ADG/SSI      if generation1

Documentation/devicetree/bindings/sound/st,sta32x.txt

@@ -19,6 +19,10 @@ Required properties:
 
 Optional properties:
 
+  - clocks, clock-names: Clock specifier for XTI input clock.
+	If specified, the clock will be enabled when the codec is probed,
+	and disabled when it is removed. The 'clock-names' must be set to 'xti'.
+
   -  st,output-conf: number, Selects the output configuration:
 	0: 2-channel (full-bridge) power, 2-channel data-out
 	1: 2 (half-bridge). 1 (full-bridge) on-board power
@@ -39,6 +43,9 @@ Optional properties:
   -  st,thermal-warning-recover:
 	If present, thermal warning recovery is enabled.
 
+  - st,fault-detect-recovery:
+	If present, fault detect recovery is enabled.
+
   -  st,thermal-warning-adjustment:
 	If present, thermal warning adjustment is enabled.
 
@@ -76,6 +83,8 @@ Example:
 codec: sta32x@38 {
 	compatible = "st,sta32x";
 	reg = <0x1c>;
+	clocks = <&clock>;
+	clock-names = "xti";
 	reset-gpios = <&gpio1 19 0>;
 	power-down-gpios = <&gpio1 16 0>;
 	st,output-conf = /bits/ 8  <0x3>;	// set output to 2-channel

Documentation/devicetree/bindings/sound/st,stm32-sai.txt

@@ -31,7 +31,11 @@ SAI subnodes required properties:
   - reg: Base address and size of SAI sub-block register set.
   - clocks: Must contain one phandle and clock specifier pair
 	for sai_ck which feeds the internal clock generator.
+	If the SAI shares a master clock, with another SAI set as MCLK
+	clock provider, SAI provider phandle must be specified here.
   - clock-names: Must contain "sai_ck".
+	Must also contain "MCLK", if SAI shares a master clock,
+	with a SAI set as MCLK clock provider.
   - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
   - dma-names: identifier string for each DMA request line
 	"tx": if sai sub-block is configured as playback DAI
@@ -51,6 +55,9 @@ SAI subnodes Optional properties:
 	configured according to protocol defined in related DAI link node,
 	such as i2s, left justified, right justified, dsp and pdm protocols.
 	Note: ac97 protocol is not supported by SAI driver
+   - #clock-cells: should be 0. This property must be present if the SAI device
+	is a master clock provider, according to clocks bindings, described in
+	Documentation/devicetree/bindings/clock/clock-bindings.txt.
 
 The device node should contain one 'port' child node with one child 'endpoint'
 node, according to the bindings defined in Documentation/devicetree/bindings/

Documentation/devicetree/bindings/sound/sun4i-i2s.txt

@@ -10,6 +10,7 @@ Required properties:
    - "allwinner,sun6i-a31-i2s"
    - "allwinner,sun8i-a83t-i2s"
    - "allwinner,sun8i-h3-i2s"
+   - "allwinner,sun50i-a64-codec-i2s"
 - reg: physical base address of the controller and length of memory mapped
   region.
 - interrupts: should contain the I2S interrupt.
@@ -26,6 +27,7 @@ Required properties for the following compatibles:
 	- "allwinner,sun6i-a31-i2s"
 	- "allwinner,sun8i-a83t-i2s"
 	- "allwinner,sun8i-h3-i2s"
+	- "allwinner,sun50i-a64-codec-i2s"
 - resets: phandle to the reset line for this codec
 
 Example:

Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt

@@ -0,0 +1,12 @@
+* Allwinner A64 Codec Analog Controls
+
+Required properties:
+- compatible: must be one of the following compatibles:
+		- "allwinner,sun50i-a64-codec-analog"
+- reg: must contain the registers location and length
+
+Example:
+	codec_analog: codec-analog@1f015c0 {
+		compatible = "allwinner,sun50i-a64-codec-analog";
+		reg = <0x01f015c0 0x4>;
+	};

Documentation/devicetree/bindings/sound/ts3a227e.txt

@@ -14,7 +14,7 @@ Required properties:
 
 Optional properies:
  - ti,micbias:   Intended MICBIAS voltage (datasheet section 9.6.7).
-      Select 0/1/2/3/4/5/6/7 to specify MACBIAS voltage
+      Select 0/1/2/3/4/5/6/7 to specify MICBIAS voltage
       2.1V/2.2V/2.3V/2.4V/2.5V/2.6V/2.7V/2.8V
       Default value is "1" (2.2V).
 

Documentation/devicetree/bindings/sound/wm8782.txt

@@ -0,0 +1,17 @@
+WM8782 stereo ADC
+
+This device does not have any control interface or reset pins.
+
+Required properties:
+
+ - compatible  : "wlf,wm8782"
+ - Vdda-supply : phandle to a regulator for the analog power supply (2.7V - 5.5V)
+ - Vdd-supply  : phandle to a regulator for the digital power supply (2.7V - 3.6V)
+
+Example:
+
+wm8782: stereo-adc {
+	compatible = "wlf,wm8782";
+	Vdda-supply = <&vdda_supply>;
+	Vdd-supply = <&vdd_supply>;
+};

Documentation/devicetree/bindings/trivial-devices.txt

@@ -35,7 +35,6 @@ at,24c08		i2c serial eeprom  (24cxx)
 atmel,at97sc3204t	i2c trusted platform module (TPM)
 capella,cm32181		CM32181: Ambient Light Sensor
 capella,cm3232		CM3232: Ambient Light Sensor
-cirrus,cs42l51		Cirrus Logic CS42L51 audio codec
 dallas,ds1374		I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output
 dallas,ds1631		High-Precision Digital Thermometer
 dallas,ds1672		Dallas DS1672 Real-time Clock

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -235,6 +235,7 @@ micrel	Micrel Inc.
 microchip	Microchip Technology Inc.
 microcrystal	Micro Crystal AG
 micron	Micron Technology Inc.
+mikroe		MikroElektronika d.o.o.
 minix	MINIX Technology Ltd.
 miramems	MiraMEMS Sensing Technology Co., Ltd.
 mitsubishi	Mitsubishi Electric Corporation

Documentation/sound/hd-audio/models.rst

@@ -309,6 +309,8 @@ asus-nx50
     ASUS Nx50 fixups
 asus-nx51
     ASUS Nx51 fixups
+asus-g751
+    ASUS G751 fixups
 alc891-headset
     Headset mode support on ALC891
 alc891-headset-multi