Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:

 - StrongARM SA1111 updates to modernise and remove cruft

 - Add StrongARM gpio drivers for board GPIOs

 - Verify size of zImage is what we expect to avoid issues with
   appended DTB

 - nommu updates from Vladimir Murzin

 - page table read-write-execute checking from Jinbum Park

 - Broadcom Brahma-B15 cache updates from Florian Fainelli

 - Avoid failure with kprobes test caused by inappropriately
   placed kprobes

 - Remove __memzero optimisation (which was incorrectly being
   used directly by some drivers)

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (32 commits)
  ARM: 8745/1: get rid of __memzero()
  ARM: 8744/1: don't discard memblock for kexec
  ARM: 8743/1: bL_switcher: add MODULE_LICENSE tag
  ARM: 8742/1: Always use REFCOUNT_FULL
  ARM: 8741/1: B15: fix unused label warnings
  ARM: 8740/1: NOMMU: Make sure we do not hold stale data in mem[] array
  ARM: 8739/1: NOMMU: Setup VBAR/Hivecs for secondaries cores
  ARM: 8738/1: Disable CONFIG_DEBUG_VIRTUAL for NOMMU
  ARM: 8737/1: mm: dump: add checking for writable and executable
  ARM: 8736/1: mm: dump: make the page table dumping seq_file
  ARM: 8735/1: mm: dump: make page table dumping reusable
  ARM: sa1100/neponset: add GPIO drivers for control and modem registers
  ARM: sa1100/assabet: add BCR/BSR GPIO driver
  ARM: 8734/1: mm: idmap: Mark variables as ro_after_init
  ARM: 8733/1: hw_breakpoint: Mark variables as __ro_after_init
  ARM: 8732/1: NOMMU: Allow userspace to access background MPU region
  ARM: 8727/1: MAINTAINERS: Update brcmstb entries to cover B15 code
  ARM: 8728/1: B15: Register reboot notifier for KEXEC
  ARM: 8730/1: B15: Add suspend/resume hooks
  ARM: 8726/1: B15: Add CPU hotplug awareness
  ...

MAINTAINERS

@@ -2855,6 +2855,8 @@ S:	Maintained
 F:	arch/arm/mach-bcm/*brcmstb*
 F:	arch/arm/boot/dts/bcm7*.dts*
 F:	drivers/bus/brcmstb_gisb.c
+F:	arch/arm/mm/cache-b15-rac.c
+F:	arch/arm/include/asm/hardware/cache-b15-rac.h
 N:	brcmstb
 
 BROADCOM BMIPS CPUFREQ DRIVER

arch/arm/Kconfig

@@ -3,8 +3,8 @@ config ARM
 	bool
 	default y
 	select ARCH_CLOCKSOURCE_DATA
-	select ARCH_DISCARD_MEMBLOCK if !HAVE_ARCH_PFN_VALID
-	select ARCH_HAS_DEBUG_VIRTUAL
+	select ARCH_DISCARD_MEMBLOCK if !HAVE_ARCH_PFN_VALID && !KEXEC
+	select ARCH_HAS_DEBUG_VIRTUAL if MMU
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_SET_MEMORY
@@ -100,6 +100,7 @@ config ARM
 	select OLD_SIGACTION
 	select OLD_SIGSUSPEND3
 	select PERF_USE_VMALLOC
+	select REFCOUNT_FULL
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
 	# Above selects are sorted alphabetically; please add new ones
@@ -1526,12 +1527,10 @@ config THUMB2_KERNEL
 	bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY
 	depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K
 	default y if CPU_THUMBONLY
-	select ARM_ASM_UNIFIED
 	select ARM_UNWIND
 	help
 	  By enabling this option, the kernel will be compiled in
-	  Thumb-2 mode. A compiler/assembler that understand the unified
-	  ARM-Thumb syntax is needed.
+	  Thumb-2 mode.
 
 	  If unsure, say N.
 
@@ -1566,9 +1565,6 @@ config THUMB2_AVOID_R_ARM_THM_JUMP11
 
 	  Unless you are sure your tools don't have this problem, say Y.
 
-config ARM_ASM_UNIFIED
-	bool
-
 config ARM_PATCH_IDIV
 	bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()"
 	depends on CPU_32v7 && !XIP_KERNEL

arch/arm/Kconfig.debug

@@ -3,10 +3,14 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
-config ARM_PTDUMP
+config ARM_PTDUMP_CORE
+	def_bool n
+
+config ARM_PTDUMP_DEBUGFS
 	bool "Export kernel pagetable layout to userspace via debugfs"
 	depends on DEBUG_KERNEL
 	depends on MMU
+	select ARM_PTDUMP_CORE
 	select DEBUG_FS
 	---help---
 	  Say Y here if you want to show the kernel pagetable layout in a
@@ -16,6 +20,33 @@ config ARM_PTDUMP
 	  kernel.
 	  If in doubt, say "N"
 
+config DEBUG_WX
+	bool "Warn on W+X mappings at boot"
+	select ARM_PTDUMP_CORE
+	---help---
+		Generate a warning if any W+X mappings are found at boot.
+
+		This is useful for discovering cases where the kernel is leaving
+		W+X mappings after applying NX, as such mappings are a security risk.
+
+		Look for a message in dmesg output like this:
+
+			arm/mm: Checked W+X mappings: passed, no W+X pages found.
+
+		or like this, if the check failed:
+
+			arm/mm: Checked W+X mappings: FAILED, <N> W+X pages found.
+
+		Note that even if the check fails, your kernel is possibly
+		still fine, as W+X mappings are not a security hole in
+		themselves, what they do is that they make the exploitation
+		of other unfixed kernel bugs easier.
+
+		There is no runtime or memory usage effect of this option
+		once the kernel has booted up - it's a one time check.
+
+		If in doubt, say "Y".
+
 # RMK wants arm kernels compiled with frame pointers or stack unwinding.
 # If you know what you are doing and are willing to live without stack
 # traces, you can get a slightly smaller kernel by setting this option to

arch/arm/Makefile

@@ -115,17 +115,19 @@ ifeq ($(CONFIG_ARM_UNWIND),y)
 CFLAGS_ABI	+=-funwind-tables
 endif
 
+# Accept old syntax despite ".syntax unified"
+AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
+
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
 AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
-AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
 CFLAGS_ISA	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
 AFLAGS_ISA	:=$(CFLAGS_ISA) -Wa$(comma)-mthumb
 # Work around buggy relocation from gas if requested:
 ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y)
 KBUILD_CFLAGS_MODULE	+=-fno-optimize-sibling-calls
 endif
 else
-CFLAGS_ISA	:=$(call cc-option,-marm,)
+CFLAGS_ISA	:=$(call cc-option,-marm,) $(AFLAGS_NOWARN)
 AFLAGS_ISA	:=$(CFLAGS_ISA)
 endif
 

arch/arm/boot/compressed/string.c

@@ -130,8 +130,3 @@ void *memset(void *s, int c, size_t count)
 		*xs++ = c;
 	return s;
 }
-
-void __memzero(void *s, size_t count)
-{
-	memset(s, 0, count);
-}

arch/arm/boot/compressed/vmlinux.lds.S

@@ -56,6 +56,7 @@ SECTIONS
   .rodata : {
     *(.rodata)
     *(.rodata.*)
+    *(.data.rel.ro)
   }
   .piggydata : {
     *(.piggydata)
@@ -101,6 +102,12 @@ SECTIONS
    * this symbol allows further debug in the near future.
    */
   .image_end (NOLOAD) : {
+    /*
+     * EFI requires that the image is aligned to 512 bytes, and appended
+     * DTB requires that we know where the end of the image is.  Ensure
+     * that both are satisfied by ensuring that there are no additional
+     * sections emitted into the decompressor image.
+     */
     _edata_real = .;
   }
 
@@ -128,3 +135,4 @@ SECTIONS
   .stab.indexstr 0	: { *(.stab.indexstr) }
   .comment 0		: { *(.comment) }
 }
+ASSERT(_edata_real == _edata, "error: zImage file size is incorrect");

arch/arm/common/bL_switcher_dummy_if.c

@@ -57,3 +57,7 @@ static struct miscdevice bL_switcher_device = {
 	&bL_switcher_fops
 };
 module_misc_device(bL_switcher_device);
+
+MODULE_AUTHOR("Nicolas Pitre <[email protected]>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("big.LITTLE switcher dummy user interface");