Merge remote-tracking branches 'asoc/topic/ac97', 'asoc/topic/ac97-mf…

…d', 'asoc/topic/amd' and 'asoc/topic/arizona-mfd' into asoc-next

Documentation/devicetree/bindings/mfd/arizona.txt

@@ -65,45 +65,6 @@ Optional properties:
     a value that is out of range for a 16 bit register then the chip default
     will be used. If present exactly five values must be specified.
 
-  - wlf,inmode : A list of INn_MODE register values, where n is the number
-    of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
-    2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
-    If present, values must be specified less than or equal to the number of
-    input signals. If values less than the number of input signals, elements
-    that have not been specified are set to 0 by default. Entries are:
-    <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997)
-    <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
-  - wlf,out-mono : A list of boolean values indicating whether each output is
-    mono or stereo. Position within the list indicates the output affected
-    (eg. First entry in the list corresponds to output 1). A non-zero value
-    indicates a mono output. If present, the number of values should be less
-    than or equal to the number of outputs, if less values are supplied the
-    additional outputs will be treated as stereo.
-
-  - wlf,dmic-ref : DMIC reference voltage source for each input, can be
-    selected from either MICVDD or one of the MICBIAS's, defines
-    (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If
-    present, the number of values should be less than or equal to the
-    number of inputs, unspecified inputs will use the chip default.
-
-  - wlf,max-channels-clocked : The maximum number of channels to be clocked on
-    each AIF, useful for I2S systems with multiple data lines being mastered.
-    Specify one cell for each AIF to be configured, specify zero for AIFs that
-    should be handled normally.
-    If present, number of cells must be less than or equal to the number of
-    AIFs. If less than the number of AIFs, for cells that have not been
-    specified the corresponding AIFs will be treated as default setting.
-
-  - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6).
-    See the datasheet for values.
-    The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
-      wm8998, wm1814)
-
-  - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6).
-    See the datasheet for values.
-    The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
-    wm8998, wm1814)
-
   - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
     they are being externally supplied. As covered in
     Documentation/devicetree/bindings/regulator/regulator.txt
@@ -112,6 +73,7 @@ Optional properties:
 Also see child specific device properties:
   Regulator - ../regulator/arizona-regulator.txt
   Extcon    - ../extcon/extcon-arizona.txt
+  Sound     - ../sound/arizona.txt
 
 Example:
 

Documentation/devicetree/bindings/sound/wlf,arizona.txt

@@ -0,0 +1,53 @@
+Cirrus Logic Arizona class audio SoCs
+
+These devices are audio SoCs with extensive digital capabilities and a range
+of analogue I/O.
+
+This document lists sound specific bindings, see the primary binding
+document:
+  ../mfd/arizona.txt
+
+Optional properties:
+
+  - wlf,inmode : A list of INn_MODE register values, where n is the number
+    of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
+    2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
+    If present, values must be specified less than or equal to the number of
+    input signals. If values less than the number of input signals, elements
+    that have not been specified are set to 0 by default. Entries are:
+    <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997)
+    <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
+  - wlf,out-mono : A list of boolean values indicating whether each output is
+    mono or stereo. Position within the list indicates the output affected
+    (eg. First entry in the list corresponds to output 1). A non-zero value
+    indicates a mono output. If present, the number of values should be less
+    than or equal to the number of outputs, if less values are supplied the
+    additional outputs will be treated as stereo.
+
+  - wlf,dmic-ref : DMIC reference voltage source for each input, can be
+    selected from either MICVDD or one of the MICBIAS's, defines
+    (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If
+    present, the number of values should be less than or equal to the
+    number of inputs, unspecified inputs will use the chip default.
+
+  - wlf,max-channels-clocked : The maximum number of channels to be clocked on
+    each AIF, useful for I2S systems with multiple data lines being mastered.
+    Specify one cell for each AIF to be configured, specify zero for AIFs that
+    should be handled normally.
+    If present, number of cells must be less than or equal to the number of
+    AIFs. If less than the number of AIFs, for cells that have not been
+    specified the corresponding AIFs will be treated as default setting.
+
+  - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6).
+    See the datasheet for values.
+    The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
+      wm8998, wm1814)
+
+  - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6).
+    See the datasheet for values.
+    The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
+    wm8998, wm1814)
+
+  - wlf,out-volume-limit : The volume limit value that should be applied to each
+    output channel. See the datasheet for exact values. Channels are specified
+    in the order OUT1L, OUT1R, OUT2L, OUT2R, etc.

MAINTAINERS

@@ -14597,6 +14597,7 @@ F:	Documentation/devicetree/bindings/extcon/extcon-arizona.txt
 F:	Documentation/devicetree/bindings/regulator/arizona-regulator.txt
 F:	Documentation/devicetree/bindings/mfd/arizona.txt
 F:	Documentation/devicetree/bindings/mfd/wm831x.txt
+F:	Documentation/devicetree/bindings/sound/wlf,arizona.txt
 F:	arch/arm/mach-s3c64xx/mach-crag6410*
 F:	drivers/clk/clk-wm83*.c
 F:	drivers/extcon/extcon-arizona.c

drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c

@@ -371,6 +371,8 @@ static int acp_hw_init(void *handle)
 	adev->acp.acp_cell[0].name = "acp_audio_dma";
 	adev->acp.acp_cell[0].num_resources = 4;
 	adev->acp.acp_cell[0].resources = &adev->acp.acp_res[0];
+	adev->acp.acp_cell[0].platform_data = &adev->asic_type;
+	adev->acp.acp_cell[0].pdata_size = sizeof(adev->asic_type);
 
 	adev->acp.acp_cell[1].name = "designware-i2s";
 	adev->acp.acp_cell[1].num_resources = 1;

drivers/gpu/drm/amd/include/amd_shared.h

@@ -23,34 +23,9 @@
 #ifndef __AMD_SHARED_H__
 #define __AMD_SHARED_H__
 
-#define AMD_MAX_USEC_TIMEOUT		200000  /* 200 ms */
+#include <drm/amd_asic_type.h>
 
-/*
- * Supported ASIC types
- */
-enum amd_asic_type {
-	CHIP_TAHITI = 0,
-	CHIP_PITCAIRN,
-	CHIP_VERDE,
-	CHIP_OLAND,
-	CHIP_HAINAN,
-	CHIP_BONAIRE,
-	CHIP_KAVERI,
-	CHIP_KABINI,
-	CHIP_HAWAII,
-	CHIP_MULLINS,
-	CHIP_TOPAZ,
-	CHIP_TONGA,
-	CHIP_FIJI,
-	CHIP_CARRIZO,
-	CHIP_STONEY,
-	CHIP_POLARIS10,
-	CHIP_POLARIS11,
-	CHIP_POLARIS12,
-	CHIP_VEGA10,
-	CHIP_RAVEN,
-	CHIP_LAST,
-};
+#define AMD_MAX_USEC_TIMEOUT		200000  /* 200 ms */
 
 /*
  * Chip flags

drivers/input/touchscreen/Kconfig

@@ -727,7 +727,7 @@ config TOUCHSCREEN_WM831X
 
 config TOUCHSCREEN_WM97XX
 	tristate "Support for WM97xx AC97 touchscreen controllers"
-	depends on AC97_BUS
+	depends on AC97_BUS || AC97_BUS_NEW
 	help
 	  Say Y here if you have a Wolfson Microelectronics WM97xx
 	  touchscreen connected to your system. Note that this option