rshapes.c

/**********************************************************************************************
*
*   rshapes - Basic functions to draw 2d shapes and check collisions
*
*   NOTES:
*     Shapes can be draw using 3 types of primitives: LINES, TRIANGLES and QUADS.
*     Some functions implement two drawing options: TRIANGLES and QUADS, by default TRIANGLES
*     are used but QUADS implementation can be selected with SUPPORT_QUADS_DRAW_MODE define
*
*     Some functions define texture coordinates (rlTexCoord2f()) for the shapes and use a
*     user-provided texture with SetShapesTexture(), the pourpouse of this implementation
*     is allowing to reduce draw calls when combined with a texture-atlas.
*
*     By default, raylib sets the default texture and rectangle at InitWindow()[rcore] to one
*     white character of default font [rtext], this way, raylib text and shapes can be draw with
*     a single draw call and it also allows users to configure it the same way with their own fonts.
*
*   CONFIGURATION:
*
*   #define SUPPORT_MODULE_RSHAPES
*       rshapes module is included in the build
*
*   #define SUPPORT_QUADS_DRAW_MODE
*       Use QUADS instead of TRIANGLES for drawing when possible. Lines-based shapes still use LINES
*
*
*   LICENSE: zlib/libpng
*
*   Copyright (c) 2013-2023 Ramon Santamaria (@raysan5)
*
*   This software is provided "as-is", without any express or implied warranty. In no event
*   will the authors be held liable for any damages arising from the use of this software.
*
*   Permission is granted to anyone to use this software for any purpose, including commercial
*   applications, and to alter it and redistribute it freely, subject to the following restrictions:
*
*     1. The origin of this software must not be misrepresented; you must not claim that you
*     wrote the original software. If you use this software in a product, an acknowledgment
*     in the product documentation would be appreciated but is not required.
*
*     2. Altered source versions must be plainly marked as such, and must not be misrepresented
*     as being the original software.
*
*     3. This notice may not be removed or altered from any source distribution.
*
**********************************************************************************************/

#include "raylib.h"     // Declares module functions

// Check if config flags have been externally provided on compilation line
#if !defined(EXTERNAL_CONFIG_FLAGS)
    #include "config.h"         // Defines module configuration flags
#endif

#if defined(SUPPORT_MODULE_RSHAPES)

#include "rlgl.h"       // OpenGL abstraction layer to OpenGL 1.1, 2.1, 3.3+ or ES2

#include <math.h>       // Required for: sinf(), asinf(), cosf(), acosf(), sqrtf(), fabsf()
#include <float.h>      // Required for: FLT_EPSILON
#include <stdlib.h>     // Required for: RL_FREE

//----------------------------------------------------------------------------------
// Defines and Macros
//----------------------------------------------------------------------------------
// Error rate to calculate how many segments we need to draw a smooth circle,
// taken from https://stackoverflow.com/a/2244088
#ifndef SMOOTH_CIRCLE_ERROR_RATE
    #define SMOOTH_CIRCLE_ERROR_RATE    0.5f    // Circle error rate
#endif
#ifndef BEZIER_LINE_DIVISIONS
    #define BEZIER_LINE_DIVISIONS       24      // Bezier line divisions
#endif


//----------------------------------------------------------------------------------
// Types and Structures Definition
//----------------------------------------------------------------------------------
// Not here...

//----------------------------------------------------------------------------------
// Global Variables Definition
//----------------------------------------------------------------------------------
Texture2D texShapes = { 1, 1, 1, 1, 7 };                // Texture used on shapes drawing (usually a white pixel)
Rectangle texShapesRec = { 0.0f, 0.0f, 1.0f, 1.0f };    // Texture source rectangle used on shapes drawing

//----------------------------------------------------------------------------------
// Module specific Functions Declaration
//----------------------------------------------------------------------------------
static float EaseCubicInOut(float t, float b, float c, float d);    // Cubic easing

//----------------------------------------------------------------------------------
// Module Functions Definition
//----------------------------------------------------------------------------------

// Set texture and rectangle to be used on shapes drawing
// NOTE: It can be useful when using basic shapes and one single font,
// defining a font char white rectangle would allow drawing everything in a single draw call
void SetShapesTexture(Texture2D texture, Rectangle source)
{
    texShapes = texture;
    texShapesRec = source;
}

// Draw a pixel
void DrawPixel(int posX, int posY, Color color)
{
  DrawPixelV((Vector2){ (float)posX, (float)posY }, color);
}

// Draw a pixel (Vector version)
void DrawPixelV(Vector2 position, Color color)
{
#if defined(SUPPORT_QUADS_DRAW_MODE)
    rlSetTexture(texShapes.id);

    rlBegin(RL_QUADS);

        rlNormal3f(0.0f, 0.0f, 1.0f);
        rlColor4ub(color.r, color.g, color.b, color.a);

        rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
        rlVertex2f(position.x, position.y);

        rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
        rlVertex2f(position.x, position.y + 1);

        rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
        rlVertex2f(position.x + 1, position.y + 1);

        rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
        rlVertex2f(position.x + 1, position.y);

    rlEnd();

    rlSetTexture(0);
#else
    rlBegin(RL_TRIANGLES);

        rlColor4ub(color.r, color.g, color.b, color.a);

        rlVertex2f(position.x, position.y);
        rlVertex2f(position.x, position.y + 1);
        rlVertex2f(position.x + 1, position.y);

        rlVertex2f(position.x + 1, position.y);
        rlVertex2f(position.x, position.y + 1);
        rlVertex2f(position.x + 1, position.y + 1);

    rlEnd();
#endif
}

// Draw a line
void DrawLine(int startPosX, int startPosY, int endPosX, int endPosY, Color color)
{
    rlBegin(RL_LINES);
        rlColor4ub(color.r, color.g, color.b, color.a);
        rlVertex2f((float)startPosX, (float)startPosY);
        rlVertex2f((float)endPosX, (float)endPosY);
    rlEnd();
}

// Draw a line  (Vector version)
void DrawLineV(Vector2 startPos, Vector2 endPos, Color color)
{
    rlBegin(RL_LINES);
        rlColor4ub(color.r, color.g, color.b, color.a);
        rlVertex2f(startPos.x, startPos.y);
        rlVertex2f(endPos.x, endPos.y);
    rlEnd();
}

// Draw a line defining thickness
void DrawLineEx(Vector2 startPos, Vector2 endPos, float thick, Color color)
{
    Vector2 delta = { endPos.x - startPos.x, endPos.y - startPos.y };
    float length = sqrtf(delta.x*delta.x + delta.y*delta.y);

    if ((length > 0) && (thick > 0))
    {
        float scale = thick/(2*length);
        Vector2 radius = { -scale*delta.y, scale*delta.x };
        Vector2 strip[4] = {
            { startPos.x - radius.x, startPos.y - radius.y },
            { startPos.x + radius.x, startPos.y + radius.y },
            { endPos.x - radius.x, endPos.y - radius.y },
            { endPos.x + radius.x, endPos.y + radius.y }
        };

        DrawTriangleStrip(strip, 4, color);
    }
}

// Draw line using cubic-bezier curves in-out
void DrawLineBezier(Vector2 startPos, Vector2 endPos, float thick, Color color)
{
    Vector2 previous = startPos;
    Vector2 current = { 0 };

    Vector2 points[2*BEZIER_LINE_DIVISIONS + 2] = { 0 };

    for (int i = 1; i <= BEZIER_LINE_DIVISIONS; i++)
    {
        // Cubic easing in-out
        // NOTE: Easing is calculated only for y position value
        current.y = EaseCubicInOut((float)i, startPos.y, endPos.y - startPos.y, (float)BEZIER_LINE_DIVISIONS);
        current.x = previous.x + (endPos.x - startPos.x)/ (float)BEZIER_LINE_DIVISIONS;

        float dy = current.y-previous.y;
        float dx = current.x-previous.x;
        float size = 0.5f*thick/sqrtf(dx*dx+dy*dy);

        if (i==1)
        {
            points[0].x = previous.x+dy*size;
            points[0].y = previous.y-dx*size;
            points[1].x = previous.x-dy*size;
            points[1].y = previous.y+dx*size;
        }

        points[2*i+1].x = current.x-dy*size;
        points[2*i+1].y = current.y+dx*size;
        points[2*i].x = current.x+dy*size;
        points[2*i].y = current.y-dx*size;

        previous = current;
    }

    DrawTriangleStrip(points, 2*BEZIER_LINE_DIVISIONS+2, color);
}

// Draw line using quadratic bezier curves with a control point
void DrawLineBezierQuad(Vector2 startPos, Vector2 endPos, Vector2 controlPos, float thick, Color color)
{
    const float step = 1.0f/BEZIER_LINE_DIVISIONS;

    Vector2 previous = startPos;
    Vector2 current = { 0 };
    float t = 0.0f;

    Vector2 points[2*BEZIER_LINE_DIVISIONS + 2] = { 0 };

    for (int i = 0; i <= BEZIER_LINE_DIVISIONS; i++)
    {
        t = step*i;
        float a = powf(1 - t, 2);
        float b = 2*(1 - t)*t;
        float c = powf(t, 2);

        // NOTE: The easing functions aren't suitable here because they don't take a control point
        current.y = a*startPos.y + b*controlPos.y + c*endPos.y;
        current.x = a*startPos.x + b*controlPos.x + c*endPos.x;

        float dy = current.y-previous.y;
        float dx = current.x-previous.x;
        float size = 0.5f*thick/sqrtf(dx*dx+dy*dy);

        if (i==1)
        {
            points[0].x = previous.x+dy*size;
            points[0].y = previous.y-dx*size;
            points[1].x = previous.x-dy*size;
            points[1].y = previous.y+dx*size;
        }

        points[2*i+1].x = current.x-dy*size;
        points[2*i+1].y = current.y+dx*size;
        points[2*i].x = current.x+dy*size;
        points[2*i].y = current.y-dx*size;

        previous = current;
    }

    DrawTriangleStrip(points, 2*BEZIER_LINE_DIVISIONS+2, color);
}

// Draw line using cubic bezier curves with 2 control points
void DrawLineBezierCubic(Vector2 startPos, Vector2 endPos, Vector2 startControlPos, Vector2 endControlPos, float thick, Color color)
{
    const float step = 1.0f/BEZIER_LINE_DIVISIONS;

    Vector2 previous = startPos;
    Vector2 current = { 0 };
    float t = 0.0f;

    Vector2 points[2*BEZIER_LINE_DIVISIONS + 2] = { 0 };

    for (int i = 0; i <= BEZIER_LINE_DIVISIONS; i++)
    {
        t = step*i;
        float a = powf(1 - t, 3);
        float b = 3*powf(1 - t, 2)*t;
        float c = 3*(1-t)*powf(t, 2);
        float d = powf(t, 3);

        current.y = a*startPos.y + b*startControlPos.y + c*endControlPos.y + d*endPos.y;
        current.x = a*startPos.x + b*startControlPos.x + c*endControlPos.x + d*endPos.x;

        float dy = current.y-previous.y;
        float dx = current.x-previous.x;
        float size = 0.5f*thick/sqrtf(dx*dx+dy*dy);

        if (i==1)
        {
            points[0].x = previous.x+dy*size;
            points[0].y = previous.y-dx*size;
            points[1].x = previous.x-dy*size;
            points[1].y = previous.y+dx*size;
        }

        points[2*i+1].x = current.x-dy*size;
        points[2*i+1].y = current.y+dx*size;
        points[2*i].x = current.x+dy*size;
        points[2*i].y = current.y-dx*size;

        previous = current;
    }

    DrawTriangleStrip(points, 2*BEZIER_LINE_DIVISIONS+2, color);
}

// Draw lines sequence
void DrawLineStrip(Vector2 *points, int pointCount, Color color)
{
    if (pointCount >= 2)
    {
        rlBegin(RL_LINES);
            rlColor4ub(color.r, color.g, color.b, color.a);

            for (int i = 0; i < pointCount - 1; i++)
            {
                rlVertex2f(points[i].x, points[i].y);
                rlVertex2f(points[i + 1].x, points[i + 1].y);
            }
        rlEnd();
    }
}

// Draw a color-filled circle
void DrawCircle(int centerX, int centerY, float radius, Color color)
{
    DrawCircleV((Vector2){ (float)centerX, (float)centerY }, radius, color);
}

// Draw a piece of a circle
void DrawCircleSector(Vector2 center, float radius, float startAngle, float endAngle, int segments, Color color)
{
    if (radius <= 0.0f) radius = 0.1f;  // Avoid div by zero

    // Function expects (endAngle > startAngle)
    if (endAngle < startAngle)
    {
        // Swap values
        float tmp = startAngle;
        startAngle = endAngle;
        endAngle = tmp;
    }

    int minSegments = (int)ceilf((endAngle - startAngle)/90);

    if (segments < minSegments)
    {
        // Calculate the maximum angle between segments based on the error rate (usually 0.5f)
        float th = acosf(2*powf(1 - SMOOTH_CIRCLE_ERROR_RATE/radius, 2) - 1);
        segments = (int)((endAngle - startAngle)*ceilf(2*PI/th)/360);

        if (segments <= 0) segments = minSegments;
    }

    float stepLength = (endAngle - startAngle)/(float)segments;
    float angle = startAngle;

#if defined(SUPPORT_QUADS_DRAW_MODE)
    rlSetTexture(texShapes.id);

    rlBegin(RL_QUADS);
        // NOTE: Every QUAD actually represents two segments
        for (int i = 0; i < segments/2; i++)
        {
            rlColor4ub(color.r, color.g, color.b, color.a);

            rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
            rlVertex2f(center.x, center.y);

            rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
            rlVertex2f(center.x + sinf(DEG2RAD*angle)*radius, center.y + cosf(DEG2RAD*angle)*radius);

            rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
            rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*radius, center.y + cosf(DEG2RAD*(angle + stepLength))*radius);

            rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
            rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength*2))*radius, center.y + cosf(DEG2RAD*(angle + stepLength*2))*radius);

            angle += (stepLength*2);
        }

        // NOTE: In case number of segments is odd, we add one last piece to the cake
        if (segments%2)
        {
            rlColor4ub(color.r, color.g, color.b, color.a);

            rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
            rlVertex2f(center.x, center.y);

            rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
            rlVertex2f(center.x + sinf(DEG2RAD*angle)*radius, center.y + cosf(DEG2RAD*angle)*radius);

            rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
            rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*radius, center.y + cosf(DEG2RAD*(angle + stepLength))*radius);

            rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
            rlVertex2f(center.x, center.y);
        }
    rlEnd();

    rlSetTexture(0);
#else
    rlBegin(RL_TRIANGLES);
        for (int i = 0; i < segments; i++)
        {
            rlColor4ub(color.r, color.g, color.b, color.a);

            rlVertex2f(center.x, center.y);
            rlVertex2f(center.x + sinf(DEG2RAD*angle)*radius, center.y + cosf(DEG2RAD*angle)*radius);
            rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*radius, center.y + cosf(DEG2RAD*(angle + stepLength))*radius);

            angle += stepLength;
        }
    rlEnd();
#endif
}

// Draw a piece of a circle outlines
void DrawCircleSectorLines(Vector2 center, float radius, float startAngle, float endAngle, int segments, Color color)
{
    if (radius <= 0.0f) radius = 0.1f;  // Avoid div by zero issue

    // Function expects (endAngle > startAngle)
    if (endAngle < startAngle)
    {
        // Swap values
        float tmp = startAngle;
        startAngle = endAngle;
        endAngle = tmp;
    }

    int minSegments = (int)ceilf((endAngle - startAngle)/90);

    if (segments < minSegments)
    {
        // Calculate the maximum angle between segments based on the error rate (usually 0.5f)
        float th = acosf(2*powf(1 - SMOOTH_CIRCLE_ERROR_RATE/radius, 2) - 1);
        segments = (int)((endAngle - startAngle)*ceilf(2*PI/th)/360);

        if (segments <= 0) segments = minSegments;
    }

    float stepLength = (endAngle - startAngle)/(float)segments;
    float angle = startAngle;
    bool showCapLines = true;

    rlBegin(RL_LINES);
        if (showCapLines)
        {
            rlColor4ub(color.r, color.g, color.b, color.a);
            rlVertex2f(center.x, center.y);
            rlVertex2f(center.x + sinf(DEG2RAD*angle)*radius, center.y + cosf(DEG2RAD*angle)*radius);
        }

        for (int i = 0; i < segments; i++)
        {
            rlColor4ub(color.r, color.g, color.b, color.a);

            rlVertex2f(center.x + sinf(DEG2RAD*angle)*radius, center.y + cosf(DEG2RAD*angle)*radius);
            rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*radius, center.y + cosf(DEG2RAD*(angle + stepLength))*radius);

            angle += stepLength;
        }

        if (showCapLines)
        {
            rlColor4ub(color.r, color.g, color.b, color.a);
            rlVertex2f(center.x, center.y);
            rlVertex2f(center.x + sinf(DEG2RAD*angle)*radius, center.y + cosf(DEG2RAD*angle)*radius);
        }
    rlEnd();
}

// Draw a gradient-filled circle
// NOTE: Gradient goes from center (color1) to border (color2)
void DrawCircleGradient(int centerX, int centerY, float radius, Color color1, Color color2)
{
    rlBegin(RL_TRIANGLES);
        for (int i = 0; i < 360; i += 10)
        {
            rlColor4ub(color1.r, color1.g, color1.b, color1.a);
            rlVertex2f((float)centerX, (float)centerY);
            rlColor4ub(color2.r, color2.g, color2.b, color2.a);
            rlVertex2f((float)centerX + sinf(DEG2RAD*i)*radius, (float)centerY + cosf(DEG2RAD*i)*radius);
            rlColor4ub(color2.r, color2.g, color2.b, color2.a);
            rlVertex2f((float)centerX + sinf(DEG2RAD*(i + 10))*radius, (float)centerY + cosf(DEG2RAD*(i + 10))*radius);
        }
    rlEnd();
}

// Draw a color-filled circle (Vector version)
// NOTE: On OpenGL 3.3 and ES2 we use QUADS to avoid drawing order issues
void DrawCircleV(Vector2 center, float radius, Color color)
{
    DrawCircleSector(center, radius, 0, 360, 36, color);
}

// Draw circle outline
void DrawCircleLines(int centerX, int centerY, float radius, Color color)
{
    rlBegin(RL_LINES);
        rlColor4ub(color.r, color.g, color.b, color.a);

        // NOTE: Circle outline is drawn pixel by pixel every degree (0 to 360)
        for (int i = 0; i < 360; i += 10)
        {
            rlVertex2f(centerX + sinf(DEG2RAD*i)*radius, centerY + cosf(DEG2RAD*i)*radius);
            rlVertex2f(centerX + sinf(DEG2RAD*(i + 10))*radius, centerY + cosf(DEG2RAD*(i + 10))*radius);
        }
    rlEnd();
}

// Draw ellipse
void DrawEllipse(int centerX, int centerY, float radiusH, float radiusV, Color color)
{
    rlBegin(RL_TRIANGLES);
        for (int i = 0; i < 360; i += 10)
        {
            rlColor4ub(color.r, color.g, color.b, color.a);
            rlVertex2f((float)centerX, (float)centerY);
            rlVertex2f((float)centerX + sinf(DEG2RAD*i)*radiusH, (float)centerY + cosf(DEG2RAD*i)*radiusV);
            rlVertex2f((float)centerX + sinf(DEG2RAD*(i + 10))*radiusH, (float)centerY + cosf(DEG2RAD*(i + 10))*radiusV);
        }
    rlEnd();
}

// Draw ellipse outline
void DrawEllipseLines(int centerX, int centerY, float radiusH, float radiusV, Color color)
{
    rlBegin(RL_LINES);
        for (int i = 0; i < 360; i += 10)
        {
            rlColor4ub(color.r, color.g, color.b, color.a);
            rlVertex2f(centerX + sinf(DEG2RAD*i)*radiusH, centerY + cosf(DEG2RAD*i)*radiusV);
            rlVertex2f(centerX + sinf(DEG2RAD*(i + 10))*radiusH, centerY + cosf(DEG2RAD*(i + 10))*radiusV);
        }
    rlEnd();
}

// Draw ring
void DrawRing(Vector2 center, float innerRadius, float outerRadius, float startAngle, float endAngle, int segments, Color color)
{
    if (startAngle == endAngle) return;

    // Function expects (outerRadius > innerRadius)
    if (outerRadius < innerRadius)
    {
        float tmp = outerRadius;
        outerRadius = innerRadius;
        innerRadius = tmp;

        if (outerRadius <= 0.0f) outerRadius = 0.1f;
    }

    // Function expects (endAngle > startAngle)
    if (endAngle < startAngle)
    {
        // Swap values
        float tmp = startAngle;
        startAngle = endAngle;
        endAngle = tmp;
    }

    int minSegments = (int)ceilf((endAngle - startAngle)/90);

    if (segments < minSegments)
    {
        // Calculate the maximum angle between segments based on the error rate (usually 0.5f)
        float th = acosf(2*powf(1 - SMOOTH_CIRCLE_ERROR_RATE/outerRadius, 2) - 1);
        segments = (int)((endAngle - startAngle)*ceilf(2*PI/th)/360);

        if (segments <= 0) segments = minSegments;
    }

    // Not a ring
    if (innerRadius <= 0.0f)
    {
        DrawCircleSector(center, outerRadius, startAngle, endAngle, segments, color);
        return;
    }

    float stepLength = (endAngle - startAngle)/(float)segments;
    float angle = startAngle;

#if defined(SUPPORT_QUADS_DRAW_MODE)
    rlSetTexture(texShapes.id);

    rlBegin(RL_QUADS);
        for (int i = 0; i < segments; i++)
        {
            rlColor4ub(color.r, color.g, color.b, color.a);

            rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
            rlVertex2f(center.x + sinf(DEG2RAD*angle)*innerRadius, center.y + cosf(DEG2RAD*angle)*innerRadius);

            rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
            rlVertex2f(center.x + sinf(DEG2RAD*angle)*outerRadius, center.y + cosf(DEG2RAD*angle)*outerRadius);

            rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
            rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*outerRadius, center.y + cosf(DEG2RAD*(angle + stepLength))*outerRadius);

            rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
            rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*innerRadius, center.y + cosf(DEG2RAD*(angle + stepLength))*innerRadius);

            angle += stepLength;
        }
    rlEnd();

    rlSetTexture(0);
#else
    rlBegin(RL_TRIANGLES);
        for (int i = 0; i < segments; i++)
        {
            rlColor4ub(color.r, color.g, color.b, color.a);

            rlVertex2f(center.x + sinf(DEG2RAD*angle)*innerRadius, center.y + cosf(DEG2RAD*angle)*innerRadius);
            rlVertex2f(center.x + sinf(DEG2RAD*angle)*outerRadius, center.y + cosf(DEG2RAD*angle)*outerRadius);
            rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*innerRadius, center.y + cosf(DEG2RAD*(angle + stepLength))*innerRadius);

            rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*innerRadius, center.y + cosf(DEG2RAD*(angle + stepLength))*innerRadius);
            rlVertex2f(center.x + sinf(DEG2RAD*angle)*outerRadius, center.y + cosf(DEG2RAD*angle)*outerRadius);
            rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*outerRadius, center.y + cosf(DEG2RAD*(angle + stepLength))*outerRadius);

            angle += stepLength;
        }
    rlEnd();
#endif
}

// Draw ring outline
void DrawRingLines(Vector2 center, float innerRadius, float outerRadius, float startAngle, float endAngle, int segments, Color color)
{
    if (startAngle == endAngle) return;

    // Function expects (outerRadius > innerRadius)
    if (outerRadius < innerRadius)
    {
        float tmp = outerRadius;
        outerRadius = innerRadius;
        innerRadius = tmp;

        if (outerRadius <= 0.0f) outerRadius = 0.1f;
    }

    // Function expects (endAngle > startAngle)
    if (endAngle < startAngle)
    {
        // Swap values
        float tmp = startAngle;
        startAngle = endAngle;
        endAngle = tmp;
    }

    int minSegments = (int)ceilf((endAngle - startAngle)/90);

    if (segments < minSegments)
    {
        // Calculate the maximum angle between segments based on the error rate (usually 0.5f)
        float th = acosf(2*powf(1 - SMOOTH_CIRCLE_ERROR_RATE/outerRadius, 2) - 1);
        segments = (int)((endAngle - startAngle)*ceilf(2*PI/th)/360);

        if (segments <= 0) segments = minSegments;
    }

    if (innerRadius <= 0.0f)
    {
        DrawCircleSectorLines(center, outerRadius, startAngle, endAngle, segments, color);
        return;
    }

    float stepLength = (endAngle - startAngle)/(float)segments;
    float angle = startAngle;
    bool showCapLines = true;

    rlBegin(RL_LINES);
        if (showCapLines)
        {
            rlColor4ub(color.r, color.g, color.b, color.a);
            rlVertex2f(center.x + sinf(DEG2RAD*angle)*outerRadius, center.y + cosf(DEG2RAD*angle)*outerRadius);
            rlVertex2f(center.x + sinf(DEG2RAD*angle)*innerRadius, center.y + cosf(DEG2RAD*angle)*innerRadius);
        }

        for (int i = 0; i < segments; i++)
        {
            rlColor4ub(color.r, color.g, color.b, color.a);

            rlVertex2f(center.x + sinf(DEG2RAD*angle)*outerRadius, center.y + cosf(DEG2RAD*angle)*outerRadius);
            rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*outerRadius, center.y + cosf(DEG2RAD*(angle + stepLength))*outerRadius);

            rlVertex2f(center.x + sinf(DEG2RAD*angle)*innerRadius, center.y + cosf(DEG2RAD*angle)*innerRadius);
            rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*innerRadius, center.y + cosf(DEG2RAD*(angle + stepLength))*innerRadius);

            angle += stepLength;
        }

        if (showCapLines)
        {
            rlColor4ub(color.r, color.g, color.b, color.a);
            rlVertex2f(center.x + sinf(DEG2RAD*angle)*outerRadius, center.y + cosf(DEG2RAD*angle)*outerRadius);
            rlVertex2f(center.x + sinf(DEG2RAD*angle)*innerRadius, center.y + cosf(DEG2RAD*angle)*innerRadius);
        }
    rlEnd();
}

// Draw a color-filled rectangle
void DrawRectangle(int posX, int posY, int width, int height, Color color)
{
    DrawRectangleV((Vector2){ (float)posX, (float)posY }, (Vector2){ (float)width, (float)height }, color);
}

// Draw a color-filled rectangle (Vector version)
// NOTE: On OpenGL 3.3 and ES2 we use QUADS to avoid drawing order issues
void DrawRectangleV(Vector2 position, Vector2 size, Color color)
{
    DrawRectanglePro((Rectangle){ position.x, position.y, size.x, size.y }, (Vector2){ 0.0f, 0.0f }, 0.0f, color);
}

// Draw a color-filled rectangle
void DrawRectangleRec(Rectangle rec, Color color)
{
    DrawRectanglePro(rec, (Vector2){ 0.0f, 0.0f }, 0.0f, color);
}

// Draw a color-filled rectangle with pro parameters
void DrawRectanglePro(Rectangle rec, Vector2 origin, float rotation, Color color)
{
    Vector2 topLeft = { 0 };
    Vector2 topRight = { 0 };
    Vector2 bottomLeft = { 0 };
    Vector2 bottomRight = { 0 };

    // Only calculate rotation if needed
    if (rotation == 0.0f)
    {
        float x = rec.x - origin.x;
        float y = rec.y - origin.y;
        topLeft = (Vector2){ x, y };
        topRight = (Vector2){ x + rec.width, y };
        bottomLeft = (Vector2){ x, y + rec.height };
        bottomRight = (Vector2){ x + rec.width, y + rec.height };
    }
    else
    {
        float sinRotation = sinf(rotation*DEG2RAD);
        float cosRotation = cosf(rotation*DEG2RAD);
        float x = rec.x;
        float y = rec.y;
        float dx = -origin.x;
        float dy = -origin.y;

        topLeft.x = x + dx*cosRotation - dy*sinRotation;
        topLeft.y = y + dx*sinRotation + dy*cosRotation;

        topRight.x = x + (dx + rec.width)*cosRotation - dy*sinRotation;
        topRight.y = y + (dx + rec.width)*sinRotation + dy*cosRotation;

        bottomLeft.x = x + dx*cosRotation - (dy + rec.height)*sinRotation;
        bottomLeft.y = y + dx*sinRotation + (dy + rec.height)*cosRotation;

        bottomRight.x = x + (dx + rec.width)*cosRotation - (dy + rec.height)*sinRotation;
        bottomRight.y = y + (dx + rec.width)*sinRotation + (dy + rec.height)*cosRotation;
    }

#if defined(SUPPORT_QUADS_DRAW_MODE)
    rlSetTexture(texShapes.id);

    rlBegin(RL_QUADS);

        rlNormal3f(0.0f, 0.0f, 1.0f);
        rlColor4ub(color.r, color.g, color.b, color.a);

        rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
        rlVertex2f(topLeft.x, topLeft.y);

        rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
        rlVertex2f(bottomLeft.x, bottomLeft.y);

        rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
        rlVertex2f(bottomRight.x, bottomRight.y);

        rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
        rlVertex2f(topRight.x, topRight.y);

    rlEnd();

    rlSetTexture(0);
#else
    rlBegin(RL_TRIANGLES);

        rlColor4ub(color.r, color.g, color.b, color.a);

        rlVertex2f(topLeft.x, topLeft.y);
        rlVertex2f(bottomLeft.x, bottomLeft.y);
        rlVertex2f(topRight.x, topRight.y);

        rlVertex2f(topRight.x, topRight.y);
        rlVertex2f(bottomLeft.x, bottomLeft.y);
        rlVertex2f(bottomRight.x, bottomRight.y);

    rlEnd();
#endif
}

// Draw a vertical-gradient-filled rectangle
// NOTE: Gradient goes from bottom (color1) to top (color2)
void DrawRectangleGradientV(int posX, int posY, int width, int height, Color color1, Color color2)
{
    DrawRectangleGradientEx((Rectangle){ (float)posX, (float)posY, (float)width, (float)height }, color1, color2, color2, color1);
}

// Draw a horizontal-gradient-filled rectangle
// NOTE: Gradient goes from bottom (color1) to top (color2)
void DrawRectangleGradientH(int posX, int posY, int width, int height, Color color1, Color color2)
{
    DrawRectangleGradientEx((Rectangle){ (float)posX, (float)posY, (float)width, (float)height }, color1, color1, color2, color2);
}

// Draw a gradient-filled rectangle
// NOTE: Colors refer to corners, starting at top-lef corner and counter-clockwise
void DrawRectangleGradientEx(Rectangle rec, Color col1, Color col2, Color col3, Color col4)
{
    rlSetTexture(texShapes.id);

    rlBegin(RL_QUADS);
        rlNormal3f(0.0f, 0.0f, 1.0f);

        // NOTE: Default raylib font character 95 is a white square
        rlColor4ub(col1.r, col1.g, col1.b, col1.a);
        rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
        rlVertex2f(rec.x, rec.y);

        rlColor4ub(col2.r, col2.g, col2.b, col2.a);
        rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
        rlVertex2f(rec.x, rec.y + rec.height);

        rlColor4ub(col3.r, col3.g, col3.b, col3.a);
        rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
        rlVertex2f(rec.x + rec.width, rec.y + rec.height);

        rlColor4ub(col4.r, col4.g, col4.b, col4.a);
        rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
        rlVertex2f(rec.x + rec.width, rec.y);
    rlEnd();

    rlSetTexture(0);
}

// Draw rectangle outline
// NOTE: On OpenGL 3.3 and ES2 we use QUADS to avoid drawing order issues
void DrawRectangleLines(int posX, int posY, int width, int height, Color color)
{
#if defined(SUPPORT_QUADS_DRAW_MODE)
    DrawRectangle(posX, posY, width, 1, color);
    DrawRectangle(posX + width - 1, posY + 1, 1, height - 2, color);
    DrawRectangle(posX, posY + height - 1, width, 1, color);
    DrawRectangle(posX, posY + 1, 1, height - 2, color);
#else
    rlBegin(RL_LINES);
        rlColor4ub(color.r, color.g, color.b, color.a);
        rlVertex2f(posX + 1, posY + 1);
        rlVertex2f(posX + width, posY + 1);

        rlVertex2f(posX + width, posY + 1);
        rlVertex2f(posX + width, posY + height);

        rlVertex2f(posX + width, posY + height);
        rlVertex2f(posX + 1, posY + height);

        rlVertex2f(posX + 1, posY + height);
        rlVertex2f(posX + 1, posY + 1);
    rlEnd();
#endif
}

// Draw rectangle outline with extended parameters
void DrawRectangleLinesEx(Rectangle rec, float lineThick, Color color)
{
    if ((lineThick > rec.width) || (lineThick > rec.height))
    {
        if (rec.width > rec.height) lineThick = rec.height/2;
        else if (rec.width < rec.height) lineThick = rec.width/2;
    }

    // When rec = { x, y, 8.0f, 6.0f } and lineThick = 2, the following
    // four rectangles are drawn ([T]op, [B]ottom, [L]eft, [R]ight):
    //
    //   TTTTTTTT
    //   TTTTTTTT
    //   LL    RR
    //   LL    RR
    //   BBBBBBBB
    //   BBBBBBBB
    //

    Rectangle top = { rec.x, rec.y, rec.width, lineThick };
    Rectangle bottom = { rec.x, rec.y - lineThick + rec.height, rec.width, lineThick };
    Rectangle left = { rec.x, rec.y + lineThick, lineThick, rec.height - lineThick*2.0f };
    Rectangle right = { rec.x - lineThick + rec.width, rec.y + lineThick, lineThick, rec.height - lineThick*2.0f };

    DrawRectangleRec(top, color);
    DrawRectangleRec(bottom, color);
    DrawRectangleRec(left, color);
    DrawRectangleRec(right, color);
}

// Draw rectangle with rounded edges
void DrawRectangleRounded(Rectangle rec, float roundness, int segments, Color color)
{
    // Not a rounded rectangle
    if ((roundness <= 0.0f) || (rec.width < 1) || (rec.height < 1 ))
    {
        DrawRectangleRec(rec, color);
        return;
    }

    if (roundness >= 1.0f) roundness = 1.0f;

    // Calculate corner radius
    float radius = (rec.width > rec.height)? (rec.height*roundness)/2 : (rec.width*roundness)/2;
    if (radius <= 0.0f) return;

    // Calculate number of segments to use for the corners
    if (segments < 4)
    {
        // Calculate the maximum angle between segments based on the error rate (usually 0.5f)
        float th = acosf(2*powf(1 - SMOOTH_CIRCLE_ERROR_RATE/radius, 2) - 1);
        segments = (int)(ceilf(2*PI/th)/4.0f);
        if (segments <= 0) segments = 4;
    }

    float stepLength = 90.0f/(float)segments;

    /*
    Quick sketch to make sense of all of this,
    there are 9 parts to draw, also mark the 12 points we'll use

          P0____________________P1
          /|                    |\
         /1|          2         |3\
     P7 /__|____________________|__\ P2
       |   |P8                P9|   |
       | 8 |          9         | 4 |
       | __|____________________|__ |
     P6 \  |P11              P10|  / P3
         \7|          6         |5/
          \|____________________|/
          P5                    P4
    */
    // Coordinates of the 12 points that define the rounded rect
    const Vector2 point[12] = {
        {(float)rec.x + radius, rec.y}, {(float)(rec.x + rec.width) - radius, rec.y}, { rec.x + rec.width, (float)rec.y + radius },     // PO, P1, P2
        {rec.x + rec.width, (float)(rec.y + rec.height) - radius}, {(float)(rec.x + rec.width) - radius, rec.y + rec.height},           // P3, P4
        {(float)rec.x + radius, rec.y + rec.height}, { rec.x, (float)(rec.y + rec.height) - radius}, {rec.x, (float)rec.y + radius},    // P5, P6, P7
        {(float)rec.x + radius, (float)rec.y + radius}, {(float)(rec.x + rec.width) - radius, (float)rec.y + radius},                   // P8, P9
        {(float)(rec.x + rec.width) - radius, (float)(rec.y + rec.height) - radius}, {(float)rec.x + radius, (float)(rec.y + rec.height) - radius} // P10, P11
    };

    const Vector2 centers[4] = { point[8], point[9], point[10], point[11] };
    const float angles[4] = { 180.0f, 90.0f, 0.0f, 270.0f };

#if defined(SUPPORT_QUADS_DRAW_MODE)
    rlSetTexture(texShapes.id);

    rlBegin(RL_QUADS);
        // Draw all the 4 corners: [1] Upper Left Corner, [3] Upper Right Corner, [5] Lower Right Corner, [7] Lower Left Corner
        for (int k = 0; k < 4; ++k) // Hope the compiler is smart enough to unroll this loop
        {
            float angle = angles[k];
            const Vector2 center = centers[k];

            // NOTE: Every QUAD actually represents two segments
            for (int i = 0; i < segments/2; i++)
            {
                rlColor4ub(color.r, color.g, color.b, color.a);
                rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
                rlVertex2f(center.x, center.y);
                rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
                rlVertex2f(center.x + sinf(DEG2RAD*angle)*radius, center.y + cosf(DEG2RAD*angle)*radius);
                rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
                rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*radius, center.y + cosf(DEG2RAD*(angle + stepLength))*radius);
                rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
                rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength*2))*radius, center.y + cosf(DEG2RAD*(angle + stepLength*2))*radius);
                angle += (stepLength*2);
            }

            // NOTE: In case number of segments is odd, we add one last piece to the cake
            if (segments%2)
            {
                rlColor4ub(color.r, color.g, color.b, color.a);
                rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
                rlVertex2f(center.x, center.y);
                rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
                rlVertex2f(center.x + sinf(DEG2RAD*angle)*radius, center.y + cosf(DEG2RAD*angle)*radius);
                rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
                rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*radius, center.y + cosf(DEG2RAD*(angle + stepLength))*radius);
                rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
                rlVertex2f(center.x, center.y);
            }
        }

        // [2] Upper Rectangle
        rlColor4ub(color.r, color.g, color.b, color.a);
        rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
        rlVertex2f(point[0].x, point[0].y);
        rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
        rlVertex2f(point[8].x, point[8].y);
        rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
        rlVertex2f(point[9].x, point[9].y);
        rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
        rlVertex2f(point[1].x, point[1].y);

        // [4] Right Rectangle
        rlColor4ub(color.r, color.g, color.b, color.a);
        rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
        rlVertex2f(point[2].x, point[2].y);
        rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
        rlVertex2f(point[9].x, point[9].y);
        rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
        rlVertex2f(point[10].x, point[10].y);
        rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
        rlVertex2f(point[3].x, point[3].y);

        // [6] Bottom Rectangle
        rlColor4ub(color.r, color.g, color.b, color.a);
        rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
        rlVertex2f(point[11].x, point[11].y);
        rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
        rlVertex2f(point[5].x, point[5].y);
        rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
        rlVertex2f(point[4].x, point[4].y);
        rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
        rlVertex2f(point[10].x, point[10].y);

        // [8] Left Rectangle
        rlColor4ub(color.r, color.g, color.b, color.a);
        rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
        rlVertex2f(point[7].x, point[7].y);
        rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
        rlVertex2f(point[6].x, point[6].y);
        rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
        rlVertex2f(point[11].x, point[11].y);
        rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
        rlVertex2f(point[8].x, point[8].y);

        // [9] Middle Rectangle
        rlColor4ub(color.r, color.g, color.b, color.a);
        rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
        rlVertex2f(point[8].x, point[8].y);
        rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
        rlVertex2f(point[11].x, point[11].y);
        rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
        rlVertex2f(point[10].x, point[10].y);
        rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
        rlVertex2f(point[9].x, point[9].y);

    rlEnd();
    rlSetTexture(0);
#else
    rlBegin(RL_TRIANGLES);

        // Draw all of the 4 corners: [1] Upper Left Corner, [3] Upper Right Corner, [5] Lower Right Corner, [7] Lower Left Corner
        for (int k = 0; k < 4; ++k) // Hope the compiler is smart enough to unroll this loop
        {
            float angle = angles[k];
            const Vector2 center = centers[k];
            for (int i = 0; i < segments; i++)
            {
                rlColor4ub(color.r, color.g, color.b, color.a);
                rlVertex2f(center.x, center.y);
                rlVertex2f(center.x + sinf(DEG2RAD*angle)*radius, center.y + cosf(DEG2RAD*angle)*radius);
                rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*radius, center.y + cosf(DEG2RAD*(angle + stepLength))*radius);
                angle += stepLength;
            }
        }

        // [2] Upper Rectangle
        rlColor4ub(color.r, color.g, color.b, color.a);
        rlVertex2f(point[0].x, point[0].y);
        rlVertex2f(point[8].x, point[8].y);
        rlVertex2f(point[9].x, point[9].y);
        rlVertex2f(point[1].x, point[1].y);
        rlVertex2f(point[0].x, point[0].y);
        rlVertex2f(point[9].x, point[9].y);

        // [4] Right Rectangle
        rlColor4ub(color.r, color.g, color.b, color.a);
        rlVertex2f(point[9].x, point[9].y);
        rlVertex2f(point[10].x, point[10].y);
        rlVertex2f(point[3].x, point[3].y);
        rlVertex2f(point[2].x, point[2].y);
        rlVertex2f(point[9].x, point[9].y);
        rlVertex2f(point[3].x, point[3].y);

        // [6] Bottom Rectangle
        rlColor4ub(color.r, color.g, color.b, color.a);
        rlVertex2f(point[11].x, point[11].y);
        rlVertex2f(point[5].x, point[5].y);
        rlVertex2f(point[4].x, point[4].y);
        rlVertex2f(point[10].x, point[10].y);
        rlVertex2f(point[11].x, point[11].y);
        rlVertex2f(point[4].x, point[4].y);

        // [8] Left Rectangle
        rlColor4ub(color.r, color.g, color.b, color.a);
        rlVertex2f(point[7].x, point[7].y);
        rlVertex2f(point[6].x, point[6].y);
        rlVertex2f(point[11].x, point[11].y);
        rlVertex2f(point[8].x, point[8].y);
        rlVertex2f(point[7].x, point[7].y);
        rlVertex2f(point[11].x, point[11].y);

        // [9] Middle Rectangle
        rlColor4ub(color.r, color.g, color.b, color.a);
        rlVertex2f(point[8].x, point[8].y);
        rlVertex2f(point[11].x, point[11].y);
        rlVertex2f(point[10].x, point[10].y);
        rlVertex2f(point[9].x, point[9].y);
        rlVertex2f(point[8].x, point[8].y);
        rlVertex2f(point[10].x, point[10].y);
    rlEnd();
#endif
}

// Draw rectangle with rounded edges outline
void DrawRectangleRoundedLines(Rectangle rec, float roundness, int segments, float lineThick, Color color)
{
    if (lineThick < 0) lineThick = 0;

    // Not a rounded rectangle
    if (roundness <= 0.0f)
    {
        DrawRectangleLinesEx((Rectangle){rec.x-lineThick, rec.y-lineThick, rec.width+2*lineThick, rec.height+2*lineThick}, lineThick, color);
        return;
    }

    if (roundness >= 1.0f) roundness = 1.0f;

    // Calculate corner radius
    float radius = (rec.width > rec.height)? (rec.height*roundness)/2 : (rec.width*roundness)/2;
    if (radius <= 0.0f) return;

    // Calculate number of segments to use for the corners
    if (segments < 4)
    {
        // Calculate the maximum angle between segments based on the error rate (usually 0.5f)
        float th = acosf(2*powf(1 - SMOOTH_CIRCLE_ERROR_RATE/radius, 2) - 1);
        segments = (int)(ceilf(2*PI/th)/2.0f);
        if (segments <= 0) segments = 4;
    }

    float stepLength = 90.0f/(float)segments;
    const float outerRadius = radius + lineThick, innerRadius = radius;

    /*
    Quick sketch to make sense of all of this,
    marks the 16 + 4(corner centers P16-19) points we'll use

           P0 ================== P1
          // P8                P9 \\
         //                        \\
     P7 // P15                  P10 \\ P2
       ||   *P16             P17*    ||
       ||                            ||
       || P14                   P11  ||
     P6 \\  *P19             P18*   // P3
         \\                        //
          \\ P13              P12 //
           P5 ================== P4
    */
    const Vector2 point[16] = {
        {(float)rec.x + innerRadius, rec.y - lineThick}, {(float)(rec.x + rec.width) - innerRadius, rec.y - lineThick}, { rec.x + rec.width + lineThick, (float)rec.y + innerRadius }, // PO, P1, P2
        {rec.x + rec.width + lineThick, (float)(rec.y + rec.height) - innerRadius}, {(float)(rec.x + rec.width) - innerRadius, rec.y + rec.height + lineThick}, // P3, P4
        {(float)rec.x + innerRadius, rec.y + rec.height + lineThick}, { rec.x - lineThick, (float)(rec.y + rec.height) - innerRadius}, {rec.x - lineThick, (float)rec.y + innerRadius}, // P5, P6, P7
        {(float)rec.x + innerRadius, rec.y}, {(float)(rec.x + rec.width) - innerRadius, rec.y}, // P8, P9
        { rec.x + rec.width, (float)rec.y + innerRadius }, {rec.x + rec.width, (float)(rec.y + rec.height) - innerRadius}, // P10, P11
        {(float)(rec.x + rec.width) - innerRadius, rec.y + rec.height}, {(float)rec.x + innerRadius, rec.y + rec.height}, // P12, P13
        { rec.x, (float)(rec.y + rec.height) - innerRadius}, {rec.x, (float)rec.y + innerRadius} // P14, P15
    };

    const Vector2 centers[4] = {
        {(float)rec.x + innerRadius, (float)rec.y + innerRadius}, {(float)(rec.x + rec.width) - innerRadius, (float)rec.y + innerRadius}, // P16, P17
        {(float)(rec.x + rec.width) - innerRadius, (float)(rec.y + rec.height) - innerRadius}, {(float)rec.x + innerRadius, (float)(rec.y + rec.height) - innerRadius} // P18, P19
    };

    const float angles[4] = { 180.0f, 90.0f, 0.0f, 270.0f };

    if (lineThick > 1)
    {
#if defined(SUPPORT_QUADS_DRAW_MODE)
        rlSetTexture(texShapes.id);

        rlBegin(RL_QUADS);

            // Draw all the 4 corners first: Upper Left Corner, Upper Right Corner, Lower Right Corner, Lower Left Corner
            for (int k = 0; k < 4; ++k) // Hope the compiler is smart enough to unroll this loop
            {
                float angle = angles[k];
                const Vector2 center = centers[k];
                for (int i = 0; i < segments; i++)
                {
                    rlColor4ub(color.r, color.g, color.b, color.a);
                    rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
                    rlVertex2f(center.x + sinf(DEG2RAD*angle)*innerRadius, center.y + cosf(DEG2RAD*angle)*innerRadius);
                    rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
                    rlVertex2f(center.x + sinf(DEG2RAD*angle)*outerRadius, center.y + cosf(DEG2RAD*angle)*outerRadius);
                    rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
                    rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*outerRadius, center.y + cosf(DEG2RAD*(angle + stepLength))*outerRadius);
                    rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
                    rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*innerRadius, center.y + cosf(DEG2RAD*(angle + stepLength))*innerRadius);

                    angle += stepLength;
                }
            }

            // Upper rectangle
            rlColor4ub(color.r, color.g, color.b, color.a);
            rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
            rlVertex2f(point[0].x, point[0].y);
            rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
            rlVertex2f(point[8].x, point[8].y);
            rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
            rlVertex2f(point[9].x, point[9].y);
            rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
            rlVertex2f(point[1].x, point[1].y);

            // Right rectangle
            rlColor4ub(color.r, color.g, color.b, color.a);
            rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
            rlVertex2f(point[2].x, point[2].y);
            rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
            rlVertex2f(point[10].x, point[10].y);
            rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
            rlVertex2f(point[11].x, point[11].y);
            rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
            rlVertex2f(point[3].x, point[3].y);

            // Lower rectangle
            rlColor4ub(color.r, color.g, color.b, color.a);
            rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
            rlVertex2f(point[13].x, point[13].y);
            rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
            rlVertex2f(point[5].x, point[5].y);
            rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
            rlVertex2f(point[4].x, point[4].y);
            rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
            rlVertex2f(point[12].x, point[12].y);

            // Left rectangle
            rlColor4ub(color.r, color.g, color.b, color.a);
            rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
            rlVertex2f(point[15].x, point[15].y);
            rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
            rlVertex2f(point[7].x, point[7].y);
            rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
            rlVertex2f(point[6].x, point[6].y);
            rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
            rlVertex2f(point[14].x, point[14].y);

        rlEnd();
        rlSetTexture(0);
#else
        rlBegin(RL_TRIANGLES);

            // Draw all of the 4 corners first: Upper Left Corner, Upper Right Corner, Lower Right Corner, Lower Left Corner
            for (int k = 0; k < 4; ++k) // Hope the compiler is smart enough to unroll this loop
            {
                float angle = angles[k];
                const Vector2 center = centers[k];

                for (int i = 0; i < segments; i++)
                {
                    rlColor4ub(color.r, color.g, color.b, color.a);

                    rlVertex2f(center.x + sinf(DEG2RAD*angle)*innerRadius, center.y + cosf(DEG2RAD*angle)*innerRadius);
                    rlVertex2f(center.x + sinf(DEG2RAD*angle)*outerRadius, center.y + cosf(DEG2RAD*angle)*outerRadius);
                    rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*innerRadius, center.y + cosf(DEG2RAD*(angle + stepLength))*innerRadius);

                    rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*innerRadius, center.y + cosf(DEG2RAD*(angle + stepLength))*innerRadius);
                    rlVertex2f(center.x + sinf(DEG2RAD*angle)*outerRadius, center.y + cosf(DEG2RAD*angle)*outerRadius);
                    rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*outerRadius, center.y + cosf(DEG2RAD*(angle + stepLength))*outerRadius);

                    angle += stepLength;
                }
            }

            // Upper rectangle
            rlColor4ub(color.r, color.g, color.b, color.a);
            rlVertex2f(point[0].x, point[0].y);
            rlVertex2f(point[8].x, point[8].y);
            rlVertex2f(point[9].x, point[9].y);
            rlVertex2f(point[1].x, point[1].y);
            rlVertex2f(point[0].x, point[0].y);
            rlVertex2f(point[9].x, point[9].y);

            // Right rectangle
            rlColor4ub(color.r, color.g, color.b, color.a);
            rlVertex2f(point[10].x, point[10].y);
            rlVertex2f(point[11].x, point[11].y);
            rlVertex2f(point[3].x, point[3].y);
            rlVertex2f(point[2].x, point[2].y);
            rlVertex2f(point[10].x, point[10].y);
            rlVertex2f(point[3].x, point[3].y);

            // Lower rectangle
            rlColor4ub(color.r, color.g, color.b, color.a);
            rlVertex2f(point[13].x, point[13].y);
            rlVertex2f(point[5].x, point[5].y);
            rlVertex2f(point[4].x, point[4].y);
            rlVertex2f(point[12].x, point[12].y);
            rlVertex2f(point[13].x, point[13].y);
            rlVertex2f(point[4].x, point[4].y);

            // Left rectangle
            rlColor4ub(color.r, color.g, color.b, color.a);
            rlVertex2f(point[7].x, point[7].y);
            rlVertex2f(point[6].x, point[6].y);
            rlVertex2f(point[14].x, point[14].y);
            rlVertex2f(point[15].x, point[15].y);
            rlVertex2f(point[7].x, point[7].y);
            rlVertex2f(point[14].x, point[14].y);
        rlEnd();
#endif
    }
    else
    {
        // Use LINES to draw the outline
        rlBegin(RL_LINES);

            // Draw all the 4 corners first: Upper Left Corner, Upper Right Corner, Lower Right Corner, Lower Left Corner
            for (int k = 0; k < 4; ++k) // Hope the compiler is smart enough to unroll this loop
            {
                float angle = angles[k];
                const Vector2 center = centers[k];

                for (int i = 0; i < segments; i++)
                {
                    rlColor4ub(color.r, color.g, color.b, color.a);
                    rlVertex2f(center.x + sinf(DEG2RAD*angle)*outerRadius, center.y + cosf(DEG2RAD*angle)*outerRadius);
                    rlVertex2f(center.x + sinf(DEG2RAD*(angle + stepLength))*outerRadius, center.y + cosf(DEG2RAD*(angle + stepLength))*outerRadius);
                    angle += stepLength;
                }
            }

            // And now the remaining 4 lines
            for (int i = 0; i < 8; i += 2)
            {
                rlColor4ub(color.r, color.g, color.b, color.a);
                rlVertex2f(point[i].x, point[i].y);
                rlVertex2f(point[i + 1].x, point[i + 1].y);
            }

        rlEnd();
    }
}

// Draw a triangle
// NOTE: Vertex must be provided in counter-clockwise order
void DrawTriangle(Vector2 v1, Vector2 v2, Vector2 v3, Color color)
{
#if defined(SUPPORT_QUADS_DRAW_MODE)
    rlSetTexture(texShapes.id);

    rlBegin(RL_QUADS);
        rlColor4ub(color.r, color.g, color.b, color.a);

        rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
        rlVertex2f(v1.x, v1.y);

        rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
        rlVertex2f(v2.x, v2.y);

        rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
        rlVertex2f(v2.x, v2.y);

        rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
        rlVertex2f(v3.x, v3.y);
    rlEnd();

    rlSetTexture(0);
#else
    rlBegin(RL_TRIANGLES);
        rlColor4ub(color.r, color.g, color.b, color.a);
        rlVertex2f(v1.x, v1.y);
        rlVertex2f(v2.x, v2.y);
        rlVertex2f(v3.x, v3.y);
    rlEnd();
#endif
}

// Draw a triangle using lines
// NOTE: Vertex must be provided in counter-clockwise order
void DrawTriangleLines(Vector2 v1, Vector2 v2, Vector2 v3, Color color)
{
    rlBegin(RL_LINES);
        rlColor4ub(color.r, color.g, color.b, color.a);
        rlVertex2f(v1.x, v1.y);
        rlVertex2f(v2.x, v2.y);

        rlVertex2f(v2.x, v2.y);
        rlVertex2f(v3.x, v3.y);

        rlVertex2f(v3.x, v3.y);
        rlVertex2f(v1.x, v1.y);
    rlEnd();
}

// Draw a triangle fan defined by points
// NOTE: First vertex provided is the center, shared by all triangles
// By default, following vertex should be provided in counter-clockwise order
void DrawTriangleFan(Vector2 *points, int pointCount, Color color)
{
    if (pointCount >= 3)
    {
        rlSetTexture(texShapes.id);
        rlBegin(RL_QUADS);
            rlColor4ub(color.r, color.g, color.b, color.a);

            for (int i = 1; i < pointCount - 1; i++)
            {
                rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
                rlVertex2f(points[0].x, points[0].y);

                rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
                rlVertex2f(points[i].x, points[i].y);

                rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
                rlVertex2f(points[i + 1].x, points[i + 1].y);

                rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
                rlVertex2f(points[i + 1].x, points[i + 1].y);
            }
        rlEnd();
        rlSetTexture(0);
    }
}

// Draw a triangle strip defined by points
// NOTE: Every new vertex connects with previous two
void DrawTriangleStrip(Vector2 *points, int pointCount, Color color)
{
    if (pointCount >= 3)
    {
        rlBegin(RL_TRIANGLES);
            rlColor4ub(color.r, color.g, color.b, color.a);

            for (int i = 2; i < pointCount; i++)
            {
                if ((i%2) == 0)
                {
                    rlVertex2f(points[i].x, points[i].y);
                    rlVertex2f(points[i - 2].x, points[i - 2].y);
                    rlVertex2f(points[i - 1].x, points[i - 1].y);
                }
                else
                {
                    rlVertex2f(points[i].x, points[i].y);
                    rlVertex2f(points[i - 1].x, points[i - 1].y);
                    rlVertex2f(points[i - 2].x, points[i - 2].y);
                }
            }
        rlEnd();
    }
}

// Draw a regular polygon of n sides (Vector version)
void DrawPoly(Vector2 center, int sides, float radius, float rotation, Color color)
{
    if (sides < 3) sides = 3;
    float centralAngle = rotation;

#if defined(SUPPORT_QUADS_DRAW_MODE)
    rlSetTexture(texShapes.id);

    rlBegin(RL_QUADS);
        for (int i = 0; i < sides; i++)
        {
            rlColor4ub(color.r, color.g, color.b, color.a);

            rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
            rlVertex2f(center.x, center.y);

            rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
            rlVertex2f(center.x + sinf(DEG2RAD*centralAngle)*radius, center.y + cosf(DEG2RAD*centralAngle)*radius);

            rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
            rlVertex2f(center.x + sinf(DEG2RAD*centralAngle)*radius, center.y + cosf(DEG2RAD*centralAngle)*radius);

            centralAngle += 360.0f/(float)sides;
            rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
            rlVertex2f(center.x + sinf(DEG2RAD*centralAngle)*radius, center.y + cosf(DEG2RAD*centralAngle)*radius);
        }
    rlEnd();
    rlSetTexture(0);
#else
    rlBegin(RL_TRIANGLES);
        for (int i = 0; i < sides; i++)
        {
            rlColor4ub(color.r, color.g, color.b, color.a);

            rlVertex2f(center.x, center.y);
            rlVertex2f(center.x + sinf(DEG2RAD*centralAngle)*radius, center.y + cosf(DEG2RAD*centralAngle)*radius);

            centralAngle += 360.0f/(float)sides;
            rlVertex2f(center.x + sinf(DEG2RAD*centralAngle)*radius, center.y + cosf(DEG2RAD*centralAngle)*radius);
        }
    rlEnd();
#endif
}

// Draw a polygon outline of n sides
void DrawPolyLines(Vector2 center, int sides, float radius, float rotation, Color color)
{
    if (sides < 3) sides = 3;
    float centralAngle = rotation;

    rlBegin(RL_LINES);
        for (int i = 0; i < sides; i++)
        {
            rlColor4ub(color.r, color.g, color.b, color.a);

            rlVertex2f(center.x + sinf(DEG2RAD*centralAngle)*radius, center.y + cosf(DEG2RAD*centralAngle)*radius);
            centralAngle += 360.0f/(float)sides;
            rlVertex2f(center.x + sinf(DEG2RAD*centralAngle)*radius, center.y + cosf(DEG2RAD*centralAngle)*radius);
        }
    rlEnd();
}

void DrawPolyLinesEx(Vector2 center, int sides, float radius, float rotation, float lineThick, Color color)
{
    if (sides < 3) sides = 3;
    float centralAngle = rotation;
    float exteriorAngle = 360.0f/(float)sides;
    float innerRadius = radius - (lineThick*cosf(DEG2RAD*exteriorAngle/2.0f));

#if defined(SUPPORT_QUADS_DRAW_MODE)
    rlSetTexture(texShapes.id);

    rlBegin(RL_QUADS);
        for (int i = 0; i < sides; i++)
        {
            rlColor4ub(color.r, color.g, color.b, color.a);

            rlTexCoord2f(texShapesRec.x/texShapes.width, texShapesRec.y/texShapes.height);
            rlVertex2f(center.x + sinf(DEG2RAD*centralAngle)*innerRadius, center.y + cosf(DEG2RAD*centralAngle)*innerRadius);

            rlTexCoord2f(texShapesRec.x/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
            rlVertex2f(center.x + sinf(DEG2RAD*centralAngle)*radius, center.y + cosf(DEG2RAD*centralAngle)*radius);

            centralAngle += exteriorAngle;
            rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, texShapesRec.y/texShapes.height);
            rlVertex2f(center.x + sinf(DEG2RAD*centralAngle)*radius, center.y + cosf(DEG2RAD*centralAngle)*radius);

            rlTexCoord2f((texShapesRec.x + texShapesRec.width)/texShapes.width, (texShapesRec.y + texShapesRec.height)/texShapes.height);
            rlVertex2f(center.x + sinf(DEG2RAD*centralAngle)*innerRadius, center.y + cosf(DEG2RAD*centralAngle)*innerRadius);
        }
    rlEnd();
    rlSetTexture(0);
#else
    rlBegin(RL_TRIANGLES);
        for (int i = 0; i < sides; i++)
        {
            rlColor4ub(color.r, color.g, color.b, color.a);
            float nextAngle = centralAngle + exteriorAngle;

            rlVertex2f(center.x + sinf(DEG2RAD*centralAngle)*radius, center.y + cosf(DEG2RAD*centralAngle)*radius);
            rlVertex2f(center.x + sinf(DEG2RAD*centralAngle)*innerRadius, center.y + cosf(DEG2RAD*centralAngle)*innerRadius);
            rlVertex2f(center.x + sinf(DEG2RAD*nextAngle)*radius, center.y + cosf(DEG2RAD*nextAngle)*radius);

            rlVertex2f(center.x + sinf(DEG2RAD*centralAngle)*innerRadius, center.y + cosf(DEG2RAD*centralAngle)*innerRadius);
            rlVertex2f(center.x + sinf(DEG2RAD*nextAngle)*radius, center.y + cosf(DEG2RAD*nextAngle)*radius);
            rlVertex2f(center.x + sinf(DEG2RAD*nextAngle)*innerRadius, center.y + cosf(DEG2RAD*nextAngle)*innerRadius);

            centralAngle = nextAngle;
        }
    rlEnd();
#endif
}

//----------------------------------------------------------------------------------
// Module Functions Definition - Collision Detection functions
//----------------------------------------------------------------------------------

// Check if point is inside rectangle
bool CheckCollisionPointRec(Vector2 point, Rectangle rec)
{
    bool collision = false;

    if ((point.x >= rec.x) && (point.x <= (rec.x + rec.width)) && (point.y >= rec.y) && (point.y <= (rec.y + rec.height))) collision = true;

    return collision;
}

// Check if point is inside circle
bool CheckCollisionPointCircle(Vector2 point, Vector2 center, float radius)
{
    bool collision = false;

    collision = CheckCollisionCircles(point, 0, center, radius);

    return collision;
}

// Check if point is inside a triangle defined by three points (p1, p2, p3)
bool CheckCollisionPointTriangle(Vector2 point, Vector2 p1, Vector2 p2, Vector2 p3)
{
    bool collision = false;

    float alpha = ((p2.y - p3.y)*(point.x - p3.x) + (p3.x - p2.x)*(point.y - p3.y)) /
                  ((p2.y - p3.y)*(p1.x - p3.x) + (p3.x - p2.x)*(p1.y - p3.y));

    float beta = ((p3.y - p1.y)*(point.x - p3.x) + (p1.x - p3.x)*(point.y - p3.y)) /
                 ((p2.y - p3.y)*(p1.x - p3.x) + (p3.x - p2.x)*(p1.y - p3.y));

    float gamma = 1.0f - alpha - beta;

    if ((alpha > 0) && (beta > 0) && (gamma > 0)) collision = true;

    return collision;
}

// Check if point is within a polygon described by array of vertices
// NOTE: Based on http://jeffreythompson.org/collision-detection/poly-point.php
bool CheckCollisionPointPoly(Vector2 point, Vector2 *points, int pointCount)
{
    bool collision = false;

    if (pointCount > 2)
    {
        for (int i = 0; i < pointCount - 1; i++)
        {
            Vector2 vc = points[i];
            Vector2 vn = points[i + 1];

            if ((((vc.y >= point.y) && (vn.y < point.y)) || ((vc.y < point.y) && (vn.y >= point.y))) &&
                 (point.x < ((vn.x - vc.x)*(point.y - vc.y)/(vn.y - vc.y) + vc.x))) collision = !collision;
        }
    }

    return collision;
}

// Check collision between two rectangles
bool CheckCollisionRecs(Rectangle rec1, Rectangle rec2)
{
    bool collision = false;

    if ((rec1.x < (rec2.x + rec2.width) && (rec1.x + rec1.width) > rec2.x) &&
        (rec1.y < (rec2.y + rec2.height) && (rec1.y + rec1.height) > rec2.y)) collision = true;

    return collision;
}

// Check collision between two circles
bool CheckCollisionCircles(Vector2 center1, float radius1, Vector2 center2, float radius2)
{
    bool collision = false;

    float dx = center2.x - center1.x;      // X distance between centers
    float dy = center2.y - center1.y;      // Y distance between centers

    float distance = sqrtf(dx*dx + dy*dy); // Distance between centers

    if (distance <= (radius1 + radius2)) collision = true;

    return collision;
}

// Check collision between circle and rectangle
// NOTE: Reviewed version to take into account corner limit case
bool CheckCollisionCircleRec(Vector2 center, float radius, Rectangle rec)
{
    bool collision = false;

    int recCenterX = (int)(rec.x + rec.width/2.0f);
    int recCenterY = (int)(rec.y + rec.height/2.0f);

    float dx = fabsf(center.x - (float)recCenterX);
    float dy = fabsf(center.y - (float)recCenterY);

    if (dx > (rec.width/2.0f + radius)) { return false; }
    if (dy > (rec.height/2.0f + radius)) { return false; }

    if (dx <= (rec.width/2.0f)) { return true; }
    if (dy <= (rec.height/2.0f)) { return true; }

    float cornerDistanceSq = (dx - rec.width/2.0f)*(dx - rec.width/2.0f) +
                             (dy - rec.height/2.0f)*(dy - rec.height/2.0f);

    collision = (cornerDistanceSq <= (radius*radius));

    return collision;
}

// Check the collision between two lines defined by two points each, returns collision point by reference
bool CheckCollisionLines(Vector2 startPos1, Vector2 endPos1, Vector2 startPos2, Vector2 endPos2, Vector2 *collisionPoint)
{
    bool collision = false;

    float div = (endPos2.y - startPos2.y)*(endPos1.x - startPos1.x) - (endPos2.x - startPos2.x)*(endPos1.y - startPos1.y);

    if (fabsf(div) >= FLT_EPSILON)
    {
        collision = true;

        float xi = ((startPos2.x - endPos2.x)*(startPos1.x*endPos1.y - startPos1.y*endPos1.x) - (startPos1.x - endPos1.x)*(startPos2.x*endPos2.y - startPos2.y*endPos2.x))/div;
        float yi = ((startPos2.y - endPos2.y)*(startPos1.x*endPos1.y - startPos1.y*endPos1.x) - (startPos1.y - endPos1.y)*(startPos2.x*endPos2.y - startPos2.y*endPos2.x))/div;

        if (((fabsf(startPos1.x - endPos1.x) > FLT_EPSILON) && (xi < fminf(startPos1.x, endPos1.x) || (xi > fmaxf(startPos1.x, endPos1.x)))) ||
            ((fabsf(startPos2.x - endPos2.x) > FLT_EPSILON) && (xi < fminf(startPos2.x, endPos2.x) || (xi > fmaxf(startPos2.x, endPos2.x)))) ||
            ((fabsf(startPos1.y - endPos1.y) > FLT_EPSILON) && (yi < fminf(startPos1.y, endPos1.y) || (yi > fmaxf(startPos1.y, endPos1.y)))) ||
            ((fabsf(startPos2.y - endPos2.y) > FLT_EPSILON) && (yi < fminf(startPos2.y, endPos2.y) || (yi > fmaxf(startPos2.y, endPos2.y))))) collision = false;

        if (collision && (collisionPoint != 0))
        {
            collisionPoint->x = xi;
            collisionPoint->y = yi;
        }
    }

    return collision;
}

// Check if point belongs to line created between two points [p1] and [p2] with defined margin in pixels [threshold]
bool CheckCollisionPointLine(Vector2 point, Vector2 p1, Vector2 p2, int threshold)
{
    bool collision = false;

    float dxc = point.x - p1.x;
    float dyc = point.y - p1.y;
    float dxl = p2.x - p1.x;
    float dyl = p2.y - p1.y;
    float cross = dxc*dyl - dyc*dxl;

    if (fabsf(cross) < (threshold*fmaxf(fabsf(dxl), fabsf(dyl))))
    {
        if (fabsf(dxl) >= fabsf(dyl)) collision = (dxl > 0)? ((p1.x <= point.x) && (point.x <= p2.x)) : ((p2.x <= point.x) && (point.x <= p1.x));
        else collision = (dyl > 0)? ((p1.y <= point.y) && (point.y <= p2.y)) : ((p2.y <= point.y) && (point.y <= p1.y));
    }

    return collision;
}

// Get collision rectangle for two rectangles collision
Rectangle GetCollisionRec(Rectangle rec1, Rectangle rec2)
{
    Rectangle rec = { 0, 0, 0, 0 };

    if (CheckCollisionRecs(rec1, rec2))
    {
        float dxx = fabsf(rec1.x - rec2.x);
        float dyy = fabsf(rec1.y - rec2.y);

        if (rec1.x <= rec2.x)
        {
            if (rec1.y <= rec2.y)
            {
                rec.x = rec2.x;
                rec.y = rec2.y;
                rec.width = rec1.width - dxx;
                rec.height = rec1.height - dyy;
            }
            else
            {
                rec.x = rec2.x;
                rec.y = rec1.y;
                rec.width = rec1.width - dxx;
                rec.height = rec2.height - dyy;
            }
        }
        else
        {
            if (rec1.y <= rec2.y)
            {
                rec.x = rec1.x;
                rec.y = rec2.y;
                rec.width = rec2.width - dxx;
                rec.height = rec1.height - dyy;
            }
            else
            {
                rec.x = rec1.x;
                rec.y = rec1.y;
                rec.width = rec2.width - dxx;
                rec.height = rec2.height - dyy;
            }
        }

        if (rec1.width > rec2.width)
        {
            if (rec.width >= rec2.width) rec.width = rec2.width;
        }
        else
        {
            if (rec.width >= rec1.width) rec.width = rec1.width;
        }

        if (rec1.height > rec2.height)
        {
            if (rec.height >= rec2.height) rec.height = rec2.height;
        }
        else
        {
           if (rec.height >= rec1.height) rec.height = rec1.height;
        }
    }

    return rec;
}

//----------------------------------------------------------------------------------
// Module specific Functions Definition
//----------------------------------------------------------------------------------

// Cubic easing in-out
// NOTE: Used by DrawLineBezier() only
static float EaseCubicInOut(float t, float b, float c, float d)
{
    if ((t /= 0.5f*d) < 1) return 0.5f*c*t*t*t + b;

    t -= 2;

    return 0.5f*c*(t*t*t + 2.0f) + b;
}

#endif      // SUPPORT_MODULE_RSHAPES