Skip to content

WolleTD/wg-setup

Repository files navigation

wg-setup WireGuard Management

Trivial CLI tool to simplify WireGuard interface management.

Highlights:

  • add and remove peers while keeping files and running interface configuration in sync
  • list peers in condensed formats
  • purely implemented in bash (which already is a dependency of wg-quick)
  • works seamlessly with both wg-quick and systemd-networkd as interface backend
  • adds a concept of "hostnames" to WireGuard peers that can also be used to remove peers
  • uses existing configuration files, no additional services (hostnames are stored as simple comments)
  • basic hook support for e.g. automatically updating a DNS zone

The wg-setup-client tool is used to setup WireGuard client (and server) interfaces. It will use systemd-networkd if enabled, otherwise fallback to wg-quick.

Examples

# Add a peer
$ wg-setup add-peer my-peer DX/sYzuD9AYsKegfLpklFboYAWLyxKoe7CU00g9iSzc= 172.16.10.2
[Peer]
# my-peer
# Added by root at 2020-05-20
PublicKey = DX/sYzuD9AYsKegfLpklFboYAWLyxKoe7CU00g9iSzc=
AllowedIPs = 172.16.10.2/32

Add this configuration to /etc/wireguard/wg0.conf? [Y/n]
$

# Remove a peer (using hostname, IP address or public key)
$ wg-setup remove-peer 172.16.10.2
[Peer]
# my-peer
# Added by root at 2020-05-20
PublicKey = DX/sYzuD9AYsKegfLpklFboYAWLyxKoe7CU00g9iSzc=
AllowedIPs = 172.16.10.2/32

Remove this configuration from /etc/wireguard/wg0.conf? [y/N]
$

# List registered peers
$ wg-setup list-peers pubkeys
172.16.10.2     my-peer         DX/sYzuD9AYsKegfLpklFboYAWLyxKoe7CU00g9iSzc=
$

Installation

Docker

See the example directory for how to use docker-compose to set up server and client.

Server

$ git clone https://github.com/WolleTD/wg-setup.git && cd wg-setup

# To install wg-setup scripts and services
$ sudo ./install.sh

# To also configure a WireGuard server interface
$ sudo ./wg-setup-client --server [SERVER_IP] [LISTENING_PORT]

Client

$ gpg --recv-keys FB9DA662
$ curl -O https://raw.githubusercontent.com/WolleTD/wg-setup/$ref/wg-setup-client
$ curl -O https://raw.githubusercontent.com/WolleTD/wg-setup/$ref/wg-setup-client.sig
$ gpg --verify wg-setup-client.sig && chmod +x wg-setup-client
...
gpg: Good signature ...
$ sudo ./wg-setup-client -e vpn.example.com:12345 -p Vq12...3a4= 172.16.1.10/16
...
============================================================
WireGuard setup successful! Server side add-peer command:
wg-setup add-peer my_hostname my_publickey 172.16.1.10

Paste the last line printed by wg-setup-client in a terminal on the server and you're done.

Motivation

A WireGuard interface and thus a WireGuard server is usually configured in a file only editable by root, also the running interface has to be restarted or configured separately to the file for the change to take effect. Doing this manually is tedious and error-prone, so wg-setup provides add-peer and remove-peer commands to make this easier and safer. wg-setup always updates both the interface and the backing configuration files and provides an input validation layer for the file content.

While wg-quick supports an additional SaveConfig parameter, this only exports the running interface configuration upon wg-quick shutdown, carrying the risk of losing new peer configuration if the service or machine terminates abnormally. Also, it simply doesn't work with systemd-networkd and that's what I wanted to use for my WireGuard interfaces.

The next pain point of plain WireGuard is that there are no human-readable names assigned to peers. So from the beginning, my tools added a comment line with a supplied hostname for each peer. It's not tagged, it's just the first comment line in a [Peer] section.

list-peers provides a convenient way to export the client list into some other format. Currently, three formats are supported:

  • hosts: an /etc/hosts-like list of names and IP addresses
  • pubkeys: like hosts but with the pubkeys in a third column
  • dns: BIND zonefile format (only host lines, no header)

Hooks

wg-setup provides a simple hook mechanism, which will call all executables in WG_SETUP_HOOK_DIR (which defaults to /etc/wg-setup) with these arguments: added|removed <name> <public key> <allowed ips>. This can be used to e.g. update a condensed list of hosts or a DNS zone. The example hooks don't even use the provided arguments, but simply call list-peers to get a full list each time.

Setup clients with wg-setup-client

This is kind of a companion script. Where wg-setup shall help managing larger WireGuard networks, a large amount of clients has to be setup as well.

Basic usage:

sudo ./wg-setup-client -e <server-endpoint> -p <server-pubkey> <ip-address>
  • If <ip-address> is specified without prefix-length, /24 is used
  • If any of the three required parameters is missing, the values are queried interactively
  • See --help for more options
Security

To easily setup "bare" clients, wg-setup-client can basically be executed from GitHub directly. You may also serve your own copy, in any case you should always incorporate some kind of signature validation in such automatic setup environments and don't trust HTTP(S):

gpg --recv-keys FB9DA662
curl -O https://raw.githubusercontent.com/WolleTD/wg-setup/$ref/wg-setup-client
curl -O https://raw.githubusercontent.com/WolleTD/wg-setup/$ref/wg-setup-client.sig
gpg --verify wg-setup-client.sig && chmod +x setup-wg-quick

About

Scripts to better manage a WireGuard server

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages