This is a fork of esp32_basic_synth by Marcel Licence.

Forked for my personal use and experimentation, with an Arturia Beatstep MIDI controller and a custom mapping.

esp32_basic_synth

ESP32 based simple synthesizer project

The project can be seen in my video https://youtu.be/5XVK5MOKmZw

---

The project has been tested on

• ESP32 Audio Kit V2.2 (using ESP32-A1S)
• ESP32 DEVKIT - DOIT (actually only supporting esp32\1.0.4 library)

ESP32 Audio Kit V2.2

To compile set board to: ESP32 Dev Module Ensure "#define ESP32_AUDIO_KIT" is set in config.h IO22 will be used for MIDI in.

The ADC multiplexer can be used (other wise please remove #define ADC_TO_MIDI_ENABLED from config.h) Connection of the ADC multiplexer:

• EN -> Ground
• S0 -> IO23
• S1 -> IO18
• S2 -> IO14
• S3 -> Ground
• Sig -> IO12

ESP32 DEVKIT - DOIT

To compile set the board to: DOIT ESP32 DEVKIT V1 Ensure that "#define ESP32_AUDIO_KIT" has been removed from config.h

Using a DAC

An external audio DAC is recommended for this setup:

• BCLK -> IO25
• WLCK -> IO27
• DOUT -> IO26

Using no DAC

You can also get a sound without a DAC. Add '#define I2S_NODAC' to config.h

The default output pin is IO22. Add a capacitor in series of the audio line (10µF for example)

Using an ADC multiplexer

Connection of the ADC multiplexer:

• EN -> Ground
• S0 -> IO33
• S1 -> IO32
• S2 -> IO13
• S3 -> Ground
• Sig -> IO12 Here is the related video: https://youtu.be/l8GrNxElRkc

ADC Mapping

The adc module has been only tested with the ESP32 Audio Kit V2.2. In z_config.ino you can define your own mapping. Actually only 8 channels are read from the multiplexer. The adc lookup is used to define a channel and cc per analog input (C0..C7). By changing adc values a MIDI messages will generated internally. It should be also mapped int the MIDI mapping.

MIDI Mapping

A controller mapping can be found in z_config.ino. You can define your own controller mapping if your controller does support CC messages.

MIDI via USB

MIDI can be received via USB activating the MACRO "MIDI_VIA_USB_ENABLED" in config.h.

Default PIN Mapping is:

• CS: IO5
• INT: IO17 (not used)
• SCK: IO18
• MISO: IO19
• MOSI: IO23

For more information refer to the MIDI related project: https://github.com/marcel-licence/esp32_usb_midi Using USB can be seen here: https://youtu.be/Mt3rT-SVZww

---

If you have questions or ideas please feel free to use the discussion area!

---