Merge tag 'nand/for-5.10' of git://git.kernel.org/pub/scm/linux/kerne…

…l/git/mtd/linux into mtd/next NAND core changes: * Use the new generic ECC object * Create helpers to set/extract the ECC requirements * Create a helper to extract the ECC configuration * Add a NAND page I/O request type * Introduce the ECC engine framework Raw NAND core changes: * Don't overwrite the error code from nand_set_ecc_soft_ops() * Introduce nand_set_ecc_on_host_ops() * Use the NAND framework user_conf object for ECC flags * Use the ECC framework user input parsing bits * Use the ECC framework nand_ecc_is_strong_enough() helper * Use the ECC framework OOB layouts * Make use of the ECC framework * Use nanddev_get/set_ecc_requirements() when relevant * Use the new ECC engine type enumeration * Separate the ECC engine type and the ECC byte placement * Move the nand_ecc_algo enum to the generic NAND layer * Rename the ECC algorithm enumeration items * Add a kernel doc to the ECC algorithm enumeration * DT bindings: - Document boolean NAND ECC properties - Document nand-ecc-engine - Document nand-ecc-placement Raw NAND drivers changes: * Ams-Delta: Fix non-OF build warning * Atmel: - Check return values for nand_read_data_op - Simplify with dev_err_probe() - Get rid of the legacy interface implementation - Convert the driver to exec_op() - Use nand_prog_page_end_op() - Use nand_{write,read}_data_op() - Drop redundant nand_read_page_op() - Enable the NFC controller at probe time - Disable clk on error handling path in probe * Cadence: remove a redundant dev_err call * Gpmi: - Simplify with dev_err_probe() * Marvell: - Fix and update kerneldoc - Simplify with dev_err_probe() - Fix and update kerneldoc - Simplify with dev_err_probe() - Support panic_write for mtdoops * Onenand: - Simplify the return expression of onenand_transfer_auto_oob - Simplify with dev_err_probe() * Oxnas: cleanup/simplify code * Pasemi: Make pasemi_device_ready() static * Qcom: Simplify with dev_err_probe() * Stm32_fmc2: fix a buffer overflow * Vf610: Remove unused function vf610_nfc_transfer_size() SPI-NAND changes: * Use nanddev_get_ecc_conf() when relevant * Gigadevice: - Add support for GD5F4GQ4xC - Add QE Bit - Use only one dummy byte in QUADIO * Macronix: - Add support for MX31UF1GE4BC - Add support for MX31LF1GE4BC
NVIDIA · Oct 11, 2020 · 3856a28 · 3856a28
2 parents b597cc7 + 88e315d
commit 3856a28
Show file tree

Hide file tree

Showing 98 changed files with 1,710 additions and 968 deletions.
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -55,6 +55,37 @@ patternProperties:
         $ref: /schemas/types.yaml#/definitions/string
         enum: [none, soft, hw, hw_syndrome, hw_oob_first, on-die]
 
+      nand-ecc-engine:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/phandle
+        description: |
+          A phandle on the hardware ECC engine if any. There are
+          basically three possibilities:
+          1/ The ECC engine is part of the NAND controller, in this
+          case the phandle should reference the parent node.
+          2/ The ECC engine is part of the NAND part (on-die), in this
+          case the phandle should reference the node itself.
+          3/ The ECC engine is external, in this case the phandle should
+          reference the specific ECC engine node.
+
+      nand-use-soft-ecc-engine:
+        type: boolean
+        description: Use a software ECC engine.
+
+      nand-no-ecc-engine:
+        type: boolean
+        description: Do not use any ECC correction.
+
+      nand-ecc-placement:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/string
+          - enum: [ oob, interleaved ]
+        description:
+          Location of the ECC bytes. This location is unknown by default
+          but can be explicitly set to "oob", if all ECC bytes are
+          known to be stored in the OOB area, or "interleaved" if ECC
+          bytes will be interleaved with regular data in the main area.
+
       nand-ecc-algo:
         description:
           Desired ECC algorithm.

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
@@ -306,7 +306,7 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = {
 	.core_chipsel	= 1,
 	.parts		= da830_evm_nand_partitions,
 	.nr_parts	= ARRAY_SIZE(da830_evm_nand_partitions),
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.ecc_bits	= 4,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 	.bbt_td		= &da830_evm_nand_bbt_main_descr,

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
@@ -239,7 +239,7 @@ static struct davinci_nand_pdata da850_evm_nandflash_data = {
 	.core_chipsel	= 1,
 	.parts		= da850_evm_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(da850_evm_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.ecc_bits	= 4,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 	.timing		= &da850_evm_nandflash_timing,

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -82,7 +82,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.mask_chipsel		= BIT(14),
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW,
+	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.bbt_options		= NAND_BBT_USE_FLASH,
 	.ecc_bits		= 4,
 };

diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -76,7 +76,8 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.mask_chipsel		= BIT(14),
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW_SYNDROME,
+	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
+	.ecc_placement		= NAND_ECC_PLACEMENT_INTERLEAVED,
 	.ecc_bits		= 4,
 	.bbt_options		= NAND_BBT_USE_FLASH,
 };

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -146,7 +146,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.mask_chipsel		= BIT(14),
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW,
+	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.bbt_options		= NAND_BBT_USE_FLASH,
 	.ecc_bits		= 4,
 };

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -162,7 +162,7 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = {
 	.core_chipsel	= 0,
 	.parts		= davinci_evm_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(davinci_evm_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.ecc_bits	= 1,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 	.timing		= &davinci_evm_nandflash_timing,

diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -91,7 +91,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.mask_ale 		= 0x40000,
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW,
+	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.ecc_bits		= 1,
 	.options		= 0,
 };

diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -432,7 +432,7 @@ static struct davinci_nand_pdata mityomapl138_nandflash_data = {
 	.core_chipsel	= 1,
 	.parts		= mityomapl138_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(mityomapl138_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 	.options	= NAND_BUSWIDTH_16,
 	.ecc_bits	= 1, /* 4 bit mode is not supported with 16 bit NAND */

diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -90,7 +90,7 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
 	.core_chipsel	= 0,
 	.parts		= davinci_ntosd2_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.ecc_bits	= 1,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 };

diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -206,7 +206,7 @@ static struct davinci_nand_pdata omapl138_hawk_nandflash_data = {
 	.core_chipsel	= 1,
 	.parts		= omapl138_hawk_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(omapl138_hawk_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.ecc_bits	= 4,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 	.options	= NAND_BUSWIDTH_16,

diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -191,7 +191,7 @@ static struct s3c2410_platform_nand smdk_nand_info = {
 	.twrph1		= 20,
 	.nr_sets	= ARRAY_SIZE(smdk_nand_sets),
 	.sets		= smdk_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 /* devices we initialise */

diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -218,7 +218,7 @@ static struct s3c2410_platform_nand __initdata anubis_nand_info = {
 	.nr_sets	= ARRAY_SIZE(anubis_nand_sets),
 	.sets		= anubis_nand_sets,
 	.select_chip	= anubis_nand_select,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 /* IDE channels */

diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -109,7 +109,7 @@ static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
 	.twrph1		= 40,
 	.nr_sets	= ARRAY_SIZE(at2440evb_nand_sets),
 	.sets		= at2440evb_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 /* DM9000AEP 10/100 ethernet controller */

diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -294,7 +294,7 @@ static struct s3c2410_platform_nand __initdata bast_nand_info = {
 	.nr_sets	= ARRAY_SIZE(bast_nand_sets),
 	.sets		= bast_nand_sets,
 	.select_chip	= bast_nand_select,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 /* DM9000 */

diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -416,7 +416,7 @@ static struct s3c2410_platform_nand __initdata gta02_nand_info = {
 	.twrph1		= 15,
 	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
 	.sets		= gta02_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 

diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -228,7 +228,7 @@ static struct s3c2410_platform_nand __initdata jive_nand_info = {
 	.twrph1		= 40,
 	.sets		= jive_nand_sets,
 	.nr_sets	= ARRAY_SIZE(jive_nand_sets),
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static int __init jive_mtdset(char *options)

diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -296,7 +296,7 @@ static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
 	.nr_sets	= ARRAY_SIZE(mini2440_nand_sets),
 	.sets		= mini2440_nand_sets,
 	.ignore_unset_ecc = 1,
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 };
 
 /* DM9000AEP 10/100 ethernet controller */

diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -234,7 +234,7 @@ static struct s3c2410_platform_nand __initdata osiris_nand_info = {
 	.nr_sets	= ARRAY_SIZE(osiris_nand_sets),
 	.sets		= osiris_nand_sets,
 	.select_chip	= osiris_nand_select,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 /* PCMCIA control and configuration */

diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -287,7 +287,7 @@ static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
 	.twrph1		= 20,
 	.nr_sets	= ARRAY_SIZE(qt2410_nand_sets),
 	.sets		= qt2410_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 /* UDC */

diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -620,7 +620,7 @@ static struct s3c2410_platform_nand rx1950_nand_info = {
 	.twrph1 = 15,
 	.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
 	.sets = rx1950_nand_sets,
-	.ecc_mode = NAND_ECC_SOFT,
+	.engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {

diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -158,7 +158,7 @@ static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
 	.twrph1		= 15,
 	.nr_sets	= ARRAY_SIZE(rx3715_nand_sets),
 	.sets		= rx3715_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static struct platform_device *rx3715_devices[] __initdata = {

diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -112,7 +112,7 @@ static struct s3c2410_platform_nand __initdata vstms_nand_info = {
 	.twrph1		= 20,
 	.nr_sets	= ARRAY_SIZE(vstms_nand_sets),
 	.sets		= vstms_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static struct platform_device *vstms_devices[] __initdata = {

diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -199,7 +199,7 @@ static struct s3c2410_platform_nand hmt_nand_info = {
 	.twrph1		= 40,
 	.nr_sets	= ARRAY_SIZE(hmt_nand_sets),
 	.sets		= hmt_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static struct gpio_led hmt_leds[] = {

diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -136,7 +136,7 @@ static struct s3c2410_platform_nand mini6410_nand_info = {
 	.twrph1		= 40,
 	.nr_sets	= ARRAY_SIZE(mini6410_nand_sets),
 	.sets		= mini6410_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static struct s3c_fb_pd_win mini6410_lcd_type0_fb_win = {

diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -188,7 +188,7 @@ static struct s3c2410_platform_nand real6410_nand_info = {
 	.twrph1		= 40,
 	.nr_sets	= ARRAY_SIZE(real6410_nand_sets),
 	.sets		= real6410_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static struct platform_device *real6410_devices[] __initdata = {

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
@@ -9,4 +9,12 @@ source "drivers/mtd/nand/onenand/Kconfig"
 source "drivers/mtd/nand/raw/Kconfig"
 source "drivers/mtd/nand/spi/Kconfig"
 
+menu "ECC engine support"
+
+config MTD_NAND_ECC
+       bool
+       depends on MTD_NAND_CORE
+
+endmenu
+
 endmenu
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
@@ -6,3 +6,5 @@ obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
 obj-y	+= onenand/
 obj-y	+= raw/
 obj-y	+= spi/
+
+nandcore-$(CONFIG_MTD_NAND_ECC) += ecc.o